Имеется - promise fasttrak s150 sx4 с четырьмя 500Гб винтами запряженными в рейд5, и собственно фря. Массив в настройках железки виден, на весь массив ранее из под винды (которую и сменила сейчас фряха) был создан один раздел нтфс. Хочу его примонтировать к системе, но (как я понял) система не видит раздела на рейде.
root@homeserv:/dev/raid # mount -w -t ntfs /dev/raid/r0 /raid
mount_ntfs: /dev/raid/r0: Input/output error
никаких вариаций типа r0p1 нет =(
dmesg:
Код: Выделить всё
root@homeserv:/dev/raid # dmesg
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0 r243826: Tue Dec 4 06:55:39 UTC 2012
root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
CPU: Intel(R) Celeron(R) CPU 3.06GHz (3067.10-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf49 Family = f Model = 4 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x651d<SSE3,DTES64,MON,DS_CPL,TM2,CNXT-ID,CX16,xTPR>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 2147483648 (2048 MB)
avail memory = 2077765632 (1981 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <A M I OEMAPIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7f700000 (3) failed
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x6800-0x6807 mem 0xcfc00000-0xcfc7ffff,0xd0000000-0xdfffffff,0xcfc80000-0xcfcbffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7932k stolen memory
hdac0: <Intel 82801G HDA Controller> mem 0xcfcf8000-0xcfcfbfff irq 19 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xd800-0xd81f mem 0xcffe0000-0xcfffffff irq 17 at device 0.0 on pci2
em0: Using an MSI interrupt
em0: Ethernet address: 00:17:31:57:f9:bb
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x7000-0x701f irq 20 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x7400-0x741f irq 17 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x7800-0x781f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x8000-0x801f irq 19 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xcfcffc00-0xcfcfffff irq 20 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib3
atapci0: <ITE IT8211F UDMA133 controller> port 0xb800-0xb807,0xb400-0xb403,0xb000-0xb007,0xa800-0xa803,0xa400-0xa40f irq 19 at device 4.0 on pci1
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
atapci1: <Promise PDC20622 SATA150 controller> port 0xc800-0xc8ff,0xc400-0xc4ff,0xc000-0xc0ff mem 0xcfe00000-0xcfefffff,0xcfdf8000-0xcfdfffff irq 21 at device 9.0 on pci1
atapci1: DIMM size 256MB @ 0x00000000
ata4: <ATA channel> at channel 0 on atapci1
ata5: <ATA channel> at channel 1 on atapci1
ata6: <ATA channel> at channel 2 on atapci1
ata7: <ATA channel> at channel 3 on atapci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci2
atapci3: <Intel ICH7 SATA300 controller> port 0x9800-0x9807,0x9400-0x9403,0x9000-0x9007,0x8800-0x8803,0x8400-0x840f irq 17 at device 31.2 on pci0
ata8: <ATA channel> at channel 0 on atapci3
ata9: <ATA channel> at channel 1 on atapci3
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcb000-0xd77ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC882 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC882 Audio Function Group> at nid 1 on hdacc0
hdaa0: hdaa_audio_as_parse: Duplicate pin 0 (25) in association 4! Disabling association.
pcm0: <Realtek ALC882 (Rear Analog 7.1 Line-out)> at nid 20,22,21,23 on hdaa0
pcm1: <Realtek ALC882 (Front Analog Headphones)> at nid 27 on hdaa0
pcm2: <Realtek ALC882 (Rear Digital)> at nid 30 on hdaa0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ada0 at ata4 bus 0 scbus2 target 0 lun 0
ada0: <ST3500410AS CC33> ATA-8 SATA 2.x device
ada0: 133.000MB/s transfers (UDMA6, PIO 8192bytes)
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad8
ada1 at ata5 bus 0 scbus3 target 0 lun 0
ada1: <ST3500320NS SN06> ATA-8 SATA 1.x device
ada1: 133.000MB/s transfers (UDMA6, PIO 8192bytes)
ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad10
ada2 at ata6 bus 0 scbus4 target 0 lun 0
ada2: <ST3500320NS SN06> ATA-8 SATA 1.x device
ada2: 133.000MB/s transfers (UDMA6, PIO 8192bytes)
ada2: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad12
ada3 at ata7 bus 0 scbus5 target 0 lun 0
ada3: <ST3500320NS SN06> ATA-8 SATA 1.x device
ada3: 133.000MB/s transfers (UDMA6, PIO 8192bytes)
ada3: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad14
ada4 at ata0 bus 0 scbus6 target 0 lun 0
ada4: <ST310212A 3.02> ATA-5 device
ada4: 66.700MB/s transfers (UDMA4, PIO 16384bytes)
ada4: 9768MB (20005650 512 byte sectors: 16H 63S/T 16383C)
ada4: Previously was known as ad0
Timecounter "TSC" frequency 3067096632 Hz quality 1000
GEOM_RAID: Promise: Array Promise created.
GEOM_RAID: Promise: Disk ada0 state changed from NONE to ACTIVE.
GEOM_RAID: Promise: Subdisk PROMISE Array 1:0-ada0 state changed from NONE to ACTIVE.
GEOM_RAID: Promise: Disk ada1 state changed from NONE to ACTIVE.
GEOM_RAID: Promise: Subdisk PROMISE Array 1:1-ada1 state changed from NONE to ACTIVE.
GEOM_RAID: Promise: Disk ada2 state changed from NONE to ACTIVE.
GEOM_RAID: Promise: Subdisk PROMISE Array 1:2-ada2 state changed from NONE to ACTIVE.
GEOM_RAID: Promise: Disk ada3 state changed from NONE to ACTIVE.
GEOM_RAID: Promise: Subdisk PROMISE Array 1:3-ada3 state changed from NONE to ACTIVE.
GEOM_RAID: Promise: Volume started.
GEOM_RAID: Promise: Volume PROMISE Array 1 state changed from STARTING to OPTIMAL.
GEOM_RAID: Promise: Provider raid/r0 for volume PROMISE Array 1 created.
Root mount waiting for: usbus4
ugen0.2: <Logitech> at usbus0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/15.00, addr 2> on usbus0
kbd2 at ukbd0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/15.00, addr 2> on usbus0
ums0: 18 buttons and [XYZT] coordinates ID=2
Root mount waiting for: usbus4
ugen4.2: <Western Digital> at usbus4
umass0: <MSC Bulk-Only Transport> on usbus4
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:10:0:-1: Attached to scbus10
Trying to mount root from ufs:/dev/ada4p2 [rw]...
da0 at umass-sim0 bus 0 scbus10 target 0 lun 0
da0: <WD Elements 1042 1019> Fixed Direct Access SCSI-6 device
da0: 40.000MB/s transfers
da0: 953867MB (1953519616 512 byte sectors: 255H 63S/T 121600C)
g_vfs_done():raid/r0[READ(offset=0, length=1024)]error = 5
Код: Выделить всё
root@homeserv:/dev/raid # fdisk -v ada0
******* Working on device /dev/ada0 *******
parameters extracted from in-core disklabel are:
cylinders=969021 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=969021 heads=16 sectors/track=63 (1008 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 7 (0x07),(NTFS, OS/2 HPFS, QNX-2 (16 bit) or Advanced UNIX)
start 63, size 2930304132 (1430812 Meg), flag 0
beg: cyl 0/ head 1/ sector 1;
end: cyl 1023/ head 254/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
root@homeserv:/dev/raid # fdisk -v ada1
******* Working on device /dev/ada1 *******
parameters extracted from in-core disklabel are:
cylinders=969021 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=969021 heads=16 sectors/track=63 (1008 blks/cyl)
fdisk: invalid fdisk partition table found
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 63, size 976773105 (476939 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 316/ head 15/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
root@homeserv:/dev/raid # fdisk -v ada2
******* Working on device /dev/ada2 *******
parameters extracted from in-core disklabel are:
cylinders=969021 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=969021 heads=16 sectors/track=63 (1008 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 7 (0x07),(NTFS, OS/2 HPFS, QNX-2 (16 bit) or Advanced UNIX)
start 63, size 2930304132 (1430812 Meg), flag 0
beg: cyl 0/ head 1/ sector 1;
end: cyl 1023/ head 254/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
root@homeserv:/dev/raid # fdisk -v ada3
******* Working on device /dev/ada3 *******
parameters extracted from in-core disklabel are:
cylinders=969021 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=969021 heads=16 sectors/track=63 (1008 blks/cyl)
fdisk: invalid fdisk partition table found
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 63, size 976773105 (476939 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 316/ head 15/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
