Статус батареи ноута на FreeBSD9

FreeBSD и прочие в роли десктопа.
Правила форума
Убедительная просьба юзать теги [code] при оформлении листингов.
Сообщения не оформленные должным образом имеют все шансы быть незамеченными.
arken
рядовой
Сообщения: 30
Зарегистрирован: 2008-09-12 19:40:31

Статус батареи ноута на FreeBSD9

Непрочитанное сообщение arken » 2012-08-30 12:43:04

Доброго дня!
Ноут HP 6720S. Статус батареи обновляется только в момент перезагрузки системы.

Код: Выделить всё

FreeBSD ark 9.1-RC1 FreeBSD 9.1-RC1 #0 r239860: Wed Aug 29 22:04:51 EEST 2012     amd64
На 9-м релизе было тоже самое. Пробовал грузить 7-ку с USB винта. Там все нормально.
Спецом экспериментировал. Отключал АС адаптер на час-полтора.
Показания apm -l && acpiconf -i 0 без изменения.

Код: Выделить всё

# acpiconf -i 0
Design capacity:        4625 mAh
Last full capacity:     4625 mAh
Technology:             secondary (rechargeable)
Design voltage:         10800 mV
Capacity (warn):        232 mAh
Capacity (low):         47 mAh
Low/warn granularity:   100 mAh
Warn/full granularity:  100 mAh
Model number:           Primary
Serial number:          03554 2012/02/17
Type:                   LIon
OEM info:               Hewlett-Packard
State:                  discharging 
Remaining capacity:     98%
Remaining time:         2:33
Present rate:           1783 mA (21790 mW)
Present voltage:        12221 mV
При включении в розетку система даже не видит что АС питание присуствует. acpi в конфигах нигде не крутил.
Может кто сталкивался с таким?

Хостинговая компания Host-Food.ru
Хостинг HostFood.ru
 

Услуги хостинговой компании Host-Food.ru

Хостинг HostFood.ru

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

Аватара пользователя
Electronik
капитан
Сообщения: 1593
Зарегистрирован: 2008-11-15 17:32:56
Откуда: Минск
Контактная информация:

Re: Статус батареи ноута на FreeBSD9

Непрочитанное сообщение Electronik » 2012-09-02 1:00:11

Код: Выделить всё

dmesg -a
после загрузки с AC, после отключения AC, после подключения AC
Предскажем будущее hw по логам и дампу, снимем сглаз и порчу с рута, поможем придумать пароль(С)
Блог

arken
рядовой
Сообщения: 30
Зарегистрирован: 2008-09-12 19:40:31

Re: Статус батареи ноута на FreeBSD9

Непрочитанное сообщение arken » 2012-09-03 10:09:03

Доброго дня!
После старта:

Код: Выделить всё

Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RC1 #0 r239972: Sat Sep  1 13:58:31 EEST 2012
    root@ark:/usr/obj/usr/src/sys/ARK9_64 amd64
CPU: Intel(R) Core(TM)2 Duo CPU     T5470  @ 1.60GHz (1596.04-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Family = 6  Model = f  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLF
LUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 4082925568 (3893 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HP     30D8    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bf700000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 irq 8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: 11ff000 vs 11fefff
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x4007 mem 0xe4400000-0xe44fffff,0xd0000000-0xdffff
fff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7676k stolen memory
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
e4620000-0xe4620fff irq 22 at device 25.0 on pci0
em0: Using an MSI interrupt
0
uhci0: LegSup = 0x2f00
 26.7 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel 82801H HDA Controller> mem 0xe4624000-0xe4627fff irq 16 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci8: <ACPI PCI bus> on pcib1
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xe4000000-0xe4000fff irq 17 at device 0.0 on pci16
uhci1: <Intel 82801H (ICH8) USB controller USB-A> port 0x4060-0x407f irq 20 at device 29.0 on pci
0
uhci1: LegSup = 0x2f00
usbus2 on uhci1
uhci2: <Intel 82801H (ICH8) USB controller USB-B> port 0x4080-0x409f irq 21 at device 29.1 on pci
0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-C> port 0x40a0-0x40bf irq 18 at device 29.2 on pci
0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xe4628000-0xe46283ff irq 20 at device
 29.7 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf
irq 16 at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ahci0: <Intel ICH8M AHCI SATA controller> port 0x13f0-0x13f7,0x15f4-0x15f7,0x1370-0x1377,0x1574-0
x1577,0x4100-0x411f mem 0xe4629000-0xe46297ff irq 17 at device 31.2 on pci0
ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x198 offMax=0x3b8
hdacc0: <Analog Devices AD1981HD HDA CODEC> at cad 0 on hdac0
hdaa0: <Analog Devices AD1981HD Audio Function Group> at nid 1 on hdacc0
pcm0: <Analog Devices AD1981HD (Analog 2.0+HP/2.0)> at nid 5,6 and 8,24,9 on hdaa0
hdacc1: <Lucent/Agere Systems (0x1040) HDA CODEC> at cad 1 on hdac0
unknown: <Lucent/Agere Systems (0x1040) HDA CODEC Modem Function Group> at nid 1 on hdacc1 (no dr
iver attached)
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub1: 4 ports with 4 removable, self powered
uhub5: 6 ports with 6 removable, self powered
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <Optiarc DVD RW AD-7561A GH09> Removable CD-ROM SCSI-0 device
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ada0: <WDC WD5000BEVT-22ZAT0 01.01A01> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
ugen0.2: <Broadcom Corp> at usbus0
ubt0: <Broadcom Corp HP Integrated Module, class 224/1, rev 2.00/1.00, addr 2> on usbus0
Trying to mount root from ufs:/dev/ada0s1a [rw]...
Setting hostuuid: 3557e1c5-8515-e011-4ca0-6d990e4b8129.
Setting hostid: 0xb03d5c08.
Entropy harvesting: interrupts ethernet point_to_point
ugen2.2: <Logitech> at usbus2
uaudio0: <Logitech Logitech Wireless Headset, class 0/0, rev 2.00/76.57, addr 2> on usbus2
uaudio0: Play: 48000 Hz, 2 ch, 16-bit S-LE PCM format.
uaudio0: Record: 48000 Hz, 1 ch, 16-bit S-LE PCM format.
uaudio0: No midi sequencer.
pcm1: <USB audio> on uaudio0
uhid0: <Logitech Logitech Wireless Headset, class 0/0, rev 2.00/76.57, addr 2> on usbus2
/dev/ada0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s1a: clean, 148563 free (4763 frags, 17975 blocks, 1.8% fragmentation)
/dev/ada0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s1d: clean, 897060 free (1492 frags, 111946 blocks, 0.1% fragmentation)
/dev/ada0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s1e: clean, 3362199 free (101359 frags, 407605 blocks, 1.6% fragmentation)
/dev/ada0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s1f: clean, 27681750 free (17262 frags, 3458061 blocks, 0.0% fragmentation)
/dev/ada0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s2a: clean, 23353047 free (6295 frags, 2918344 blocks, 0.0% fragmentation)
Mounting local file systems:.
Setting hostname: ark.
wlan0: Ethernet address: 00:1c:bf:58:e3:1a
wpi0: need multicast update callback
Starting wpa_supplicant.
Starting Network: lo0 em0 wpi0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO
>
        ether 00:1a:4b:85:05:6d
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
        status: no carrier
wpi0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
        ether 00:1c:bf:58:e3:1a
Starting Network: usbus1.
Starting Network: usbus2.
Starting Network: usbus3.
Starting Network: usbus4.
Starting Network: usbus5.
Starting webcamd.
Attached to ugen0.2[0]
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
hw.snd.default_unit: 0 -> 1
Starting webcamd.
Attached to ugen2.2[3]
wpi0: need multicast update callback
add net default: gateway 192.168.0.10
route: writing to routing socket: File exists
add net ::0.0.0.0: gateway ::1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/lo
cal/kde4/lib /usr/local/lib /usr/local/lib/compat /usr/local/lib/compat/pkg /usr/local/lib/event2
 /usr/local/lib/ffmpeg-011 /usr/local/lib/gcc46 /usr/local/lib/graphviz /usr/local/lib/mysql /usr
/local/lib/nss /usr/local/lib/pth /usr/local/lib/qt4 /usr/local/lib/speech-dispatcher /usr/local/
lib/virtualbox
32-bit compatibility ldconfig path: /usr/lib32 /usr/local/lib32/compat
Creating and/or trimming log files.
Starting syslogd.
Clearing /tmp.
Starting stunnel.
Starting hcsecd.
Starting bthidd.
Updating motd:.
Starting powerd.
Starting sdpd.
Starting default moused.
Starting dbus.
Starting hald.
Configuring syscons: keymap scrnmap font8x16 font8x14 font8x8 blanktime.
Updating KDM configuration.
Information: reading pre-existing kdmrc /usr/local/kde4/share/config/kdm/kdmrc (config version 2.
4)
Starting cupsd.
Starting avahi-daemon.
Starting sshd.
Starting cron.
Local package initialization:Nothing started.
md0
Enter passphrase:
GEOM_ELI: Device md0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
WARNING: /home2 was not properly dismounted
.
Starting background file system checks in 60 seconds.
после отключения АС источника:

Код: Выделить всё

Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RC1 #0 r239972: Sat Sep  1 13:58:31 EEST 2012
    root@ark:/usr/obj/usr/src/sys/ARK9_64 amd64
CPU: Intel(R) Core(TM)2 Duo CPU     T5470  @ 1.60GHz (1596.04-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Family = 6  Model = f  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLF
LUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 4082925568 (3893 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HP     30D8    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bf700000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 irq 8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: 11ff000 vs 11fefff
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x4007 mem 0xe4400000-0xe44fffff,0xd0000000-0xdffff
fff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7676k stolen memory
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
e4620000-0xe4620fff irq 22 at device 25.0 on pci0
em0: Using an MSI interrupt
0
uhci0: LegSup = 0x2f00
 26.7 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel 82801H HDA Controller> mem 0xe4624000-0xe4627fff irq 16 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci8: <ACPI PCI bus> on pcib1
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xe4000000-0xe4000fff irq 17 at device 0.0 on pci16
uhci1: <Intel 82801H (ICH8) USB controller USB-A> port 0x4060-0x407f irq 20 at device 29.0 on pci
0
uhci1: LegSup = 0x2f00
usbus2 on uhci1
uhci2: <Intel 82801H (ICH8) USB controller USB-B> port 0x4080-0x409f irq 21 at device 29.1 on pci
0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-C> port 0x40a0-0x40bf irq 18 at device 29.2 on pci
0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xe4628000-0xe46283ff irq 20 at device
 29.7 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf
irq 16 at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ahci0: <Intel ICH8M AHCI SATA controller> port 0x13f0-0x13f7,0x15f4-0x15f7,0x1370-0x1377,0x1574-0
x1577,0x4100-0x411f mem 0xe4629000-0xe46297ff irq 17 at device 31.2 on pci0
ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x198 offMax=0x3b8
hdacc0: <Analog Devices AD1981HD HDA CODEC> at cad 0 on hdac0
hdaa0: <Analog Devices AD1981HD Audio Function Group> at nid 1 on hdacc0
pcm0: <Analog Devices AD1981HD (Analog 2.0+HP/2.0)> at nid 5,6 and 8,24,9 on hdaa0
hdacc1: <Lucent/Agere Systems (0x1040) HDA CODEC> at cad 1 on hdac0
unknown: <Lucent/Agere Systems (0x1040) HDA CODEC Modem Function Group> at nid 1 on hdacc1 (no dr
iver attached)
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub1: 4 ports with 4 removable, self powered
uhub5: 6 ports with 6 removable, self powered
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <Optiarc DVD RW AD-7561A GH09> Removable CD-ROM SCSI-0 device
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ada0: <WDC WD5000BEVT-22ZAT0 01.01A01> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
ugen0.2: <Broadcom Corp> at usbus0
ubt0: <Broadcom Corp HP Integrated Module, class 224/1, rev 2.00/1.00, addr 2> on usbus0
Trying to mount root from ufs:/dev/ada0s1a [rw]...
Setting hostuuid: 3557e1c5-8515-e011-4ca0-6d990e4b8129.
Setting hostid: 0xb03d5c08.
Entropy harvesting: interrupts ethernet point_to_point
ugen2.2: <Logitech> at usbus2
uaudio0: <Logitech Logitech Wireless Headset, class 0/0, rev 2.00/76.57, addr 2> on usbus2
uaudio0: Play: 48000 Hz, 2 ch, 16-bit S-LE PCM format.
uaudio0: Record: 48000 Hz, 1 ch, 16-bit S-LE PCM format.
uaudio0: No midi sequencer.
pcm1: <USB audio> on uaudio0
uhid0: <Logitech Logitech Wireless Headset, class 0/0, rev 2.00/76.57, addr 2> on usbus2
/dev/ada0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s1a: clean, 148563 free (4763 frags, 17975 blocks, 1.8% fragmentation)
/dev/ada0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s1d: clean, 897060 free (1492 frags, 111946 blocks, 0.1% fragmentation)
/dev/ada0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s1e: clean, 3362199 free (101359 frags, 407605 blocks, 1.6% fragmentation)
/dev/ada0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s1f: clean, 27681750 free (17262 frags, 3458061 blocks, 0.0% fragmentation)
/dev/ada0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s2a: clean, 23353047 free (6295 frags, 2918344 blocks, 0.0% fragmentation)
Mounting local file systems:.
Setting hostname: ark.
wlan0: Ethernet address: 00:1c:bf:58:e3:1a
wpi0: need multicast update callback
Starting wpa_supplicant.
Starting Network: lo0 em0 wpi0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO
>
        ether 00:1a:4b:85:05:6d
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
        status: no carrier
wpi0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
        ether 00:1c:bf:58:e3:1a
Starting Network: usbus1.
Starting Network: usbus2.
Starting Network: usbus3.
Starting Network: usbus4.
Starting Network: usbus5.
Starting webcamd.
Attached to ugen0.2[0]
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
hw.snd.default_unit: 0 -> 1
Starting webcamd.
Attached to ugen2.2[3]
wpi0: need multicast update callback
add net default: gateway 192.168.0.10
route: writing to routing socket: File exists
add net ::0.0.0.0: gateway ::1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/lo
cal/kde4/lib /usr/local/lib /usr/local/lib/compat /usr/local/lib/compat/pkg /usr/local/lib/event2
 /usr/local/lib/ffmpeg-011 /usr/local/lib/gcc46 /usr/local/lib/graphviz /usr/local/lib/mysql /usr
/local/lib/nss /usr/local/lib/pth /usr/local/lib/qt4 /usr/local/lib/speech-dispatcher /usr/local/
lib/virtualbox
32-bit compatibility ldconfig path: /usr/lib32 /usr/local/lib32/compat
Creating and/or trimming log files.
Starting syslogd.
Clearing /tmp.
Starting stunnel.
Starting hcsecd.
Starting bthidd.
Updating motd:.
Starting powerd.
Starting sdpd.
Starting default moused.
Starting dbus.
Starting hald.
Configuring syscons: keymap scrnmap font8x16 font8x14 font8x8 blanktime.
Updating KDM configuration.
Information: reading pre-existing kdmrc /usr/local/kde4/share/config/kdm/kdmrc (config version 2.
4)
Starting cupsd.
Starting avahi-daemon.
Starting sshd.
Starting cron.
Local package initialization:Nothing started.
md0
Enter passphrase:
GEOM_ELI: Device md0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
WARNING: /home2 was not properly dismounted
.
Starting background file system checks in 60 seconds.
После подключения АС питания:

Код: Выделить всё

Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RC1 #0 r239972: Sat Sep  1 13:58:31 EEST 2012
    root@ark:/usr/obj/usr/src/sys/ARK9_64 amd64
CPU: Intel(R) Core(TM)2 Duo CPU     T5470  @ 1.60GHz (1596.04-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Family = 6  Model = f  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLF
LUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 4082925568 (3893 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HP     30D8    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bf700000 (3) failed
Event timer "i8254" frequency 1193182 Hz quality 100
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: 11ff000 vs 11fefff
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x4007 mem 0xe4400000-0xe44fffff,0xd0000000-0xdffff
fff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7676k stolen memory
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
e4620000-0xe4620fff irq 22 at device 25.0 on pci0
em0: Using an MSI interrupt
0
uhci0: LegSup = 0x2f00
 26.7 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel 82801H HDA Controller> mem 0xe4624000-0xe4627fff irq 16 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci8: <ACPI PCI bus> on pcib1
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xe4000000-0xe4000fff irq 17 at device 0.0 on pci16
uhci1: <Intel 82801H (ICH8) USB controller USB-A> port 0x4060-0x407f irq 20 at device 29.0 on pci
0
uhci1: LegSup = 0x2f00
usbus2 on uhci1
uhci2: <Intel 82801H (ICH8) USB controller USB-B> port 0x4080-0x409f irq 21 at device 29.1 on pci
0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-C> port 0x40a0-0x40bf irq 18 at device 29.2 on pci
0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xe4628000-0xe46283ff irq 20 at device
 29.7 on pci0
usbus5: EHCI version 1.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf
irq 16 at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ahci0: <Intel ICH8M AHCI SATA controller> port 0x13f0-0x13f7,0x15f4-0x15f7,0x1370-0x1377,0x1574-0
x1577,0x4100-0x411f mem 0xe4629000-0xe46297ff irq 17 at device 31.2 on pci0
ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x198 offMax=0x3b8
hdacc0: <Analog Devices AD1981HD HDA CODEC> at cad 0 on hdac0
hdaa0: <Analog Devices AD1981HD Audio Function Group> at nid 1 on hdacc0
pcm0: <Analog Devices AD1981HD (Analog 2.0+HP/2.0)> at nid 5,6 and 8,24,9 on hdaa0
hdacc1: <Lucent/Agere Systems (0x1040) HDA CODEC> at cad 1 on hdac0
unknown: <Lucent/Agere Systems (0x1040) HDA CODEC Modem Function Group> at nid 1 on hdacc1 (no dr
iver attached)
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub1: 4 ports with 4 removable, self powered
uhub5: 6 ports with 6 removable, self powered
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <Optiarc DVD RW AD-7561A GH09> Removable CD-ROM SCSI-0 device
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ada0: <WDC WD5000BEVT-22ZAT0 01.01A01> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
ugen0.2: <Broadcom Corp> at usbus0
ubt0: <Broadcom Corp HP Integrated Module, class 224/1, rev 2.00/1.00, addr 2> on usbus0
Trying to mount root from ufs:/dev/ada0s1a [rw]...
Setting hostuuid: 3557e1c5-8515-e011-4ca0-6d990e4b8129.
Setting hostid: 0xb03d5c08.
Entropy harvesting: interrupts ethernet point_to_point
ugen2.2: <Logitech> at usbus2
uaudio0: <Logitech Logitech Wireless Headset, class 0/0, rev 2.00/76.57, addr 2> on usbus2
uaudio0: Play: 48000 Hz, 2 ch, 16-bit S-LE PCM format.
uaudio0: Record: 48000 Hz, 1 ch, 16-bit S-LE PCM format.
uaudio0: No midi sequencer.
pcm1: <USB audio> on uaudio0
uhid0: <Logitech Logitech Wireless Headset, class 0/0, rev 2.00/76.57, addr 2> on usbus2
/dev/ada0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s1a: clean, 148563 free (4763 frags, 17975 blocks, 1.8% fragmentation)
/dev/ada0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s1d: clean, 897060 free (1492 frags, 111946 blocks, 0.1% fragmentation)
/dev/ada0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s1e: clean, 3362199 free (101359 frags, 407605 blocks, 1.6% fragmentation)
/dev/ada0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s1f: clean, 27681750 free (17262 frags, 3458061 blocks, 0.0% fragmentation)
/dev/ada0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s2a: clean, 23353047 free (6295 frags, 2918344 blocks, 0.0% fragmentation)
Mounting local file systems:.
Setting hostname: ark.
wlan0: Ethernet address: 00:1c:bf:58:e3:1a
wpi0: need multicast update callback
Starting wpa_supplicant.
Starting Network: lo0 em0 wpi0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO
>
        ether 00:1a:4b:85:05:6d
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
        status: no carrier
wpi0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
        ether 00:1c:bf:58:e3:1a
Starting Network: usbus1.
Starting Network: usbus2.
Starting Network: usbus3.
Starting Network: usbus4.
Starting Network: usbus5.
Starting webcamd.
Attached to ugen0.2[0]
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
hw.snd.default_unit: 0 -> 1
Starting webcamd.
Attached to ugen2.2[3]
wpi0: need multicast update callback
add net default: gateway 192.168.0.10
route: writing to routing socket: File exists
add net ::0.0.0.0: gateway ::1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/lo
cal/kde4/lib /usr/local/lib /usr/local/lib/compat /usr/local/lib/compat/pkg /usr/local/lib/event2
 /usr/local/lib/ffmpeg-011 /usr/local/lib/gcc46 /usr/local/lib/graphviz /usr/local/lib/mysql /usr
/local/lib/nss /usr/local/lib/pth /usr/local/lib/qt4 /usr/local/lib/speech-dispatcher /usr/local/
lib/virtualbox
32-bit compatibility ldconfig path: /usr/lib32 /usr/local/lib32/compat
Creating and/or trimming log files.
Starting syslogd.
Clearing /tmp.
Starting stunnel.
Starting hcsecd.
Starting bthidd.
Updating motd:.
Starting powerd.
Starting sdpd.
Starting default moused.
Starting dbus.
Starting hald.
Configuring syscons: keymap scrnmap font8x16 font8x14 font8x8 blanktime.
Updating KDM configuration.
Information: reading pre-existing kdmrc /usr/local/kde4/share/config/kdm/kdmrc (config version 2.
4)
Starting cupsd.
Starting avahi-daemon.
Starting sshd.
Starting cron.
Local package initialization:Nothing started.
md0
Enter passphrase:
GEOM_ELI: Device md0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
WARNING: /home2 was not properly dismounted
.
Starting background file system checks in 60 seconds.
Собственно ничего не меняется.