Поставил на рабочий комп Solaris 10 1/13.
Он не видит сетевую плату. Интегрированная, Windows говорит что якобы Realtek 8168D/8111Dю
Где-то нагуглил, что она поддерживается штатным драйвером rge. У рилтека ничего для Solaris нет.
prtconf -v выдаёт следующее:
Код: Выделить всё
pci1462,7529 (driver not attached)
Hardware properties:
name='assigned-addresses' type=int items=15
value=81020010.00000000.0000e800.00000000.00000100.c3020018.00000000.fdfff000.00000000.00001000.c3020020.00000000.fdff8000.00000000.00004000
name='reg' type=int items=20
value=00020000.00000000.00000000.00000000.00000000.01020010.00000000.00000000.00000000.00000100.43020018.00000000.00000000.00000000.00001000.43020020.00000000.00000000.00000000.00004000
name='compatible' type=string items=13
value='pciex10ec,8168.1462.7529.3' + 'pciex10ec,8168.1462.7529' + 'pciex10ec,8168.3' + 'pciex10ec,8168' + 'pciexclass,020000' + 'pciexclass,0200' + 'pci10ec,8168.1462.7529.3' + 'pci10ec,8168.1462.7529' + 'pci1462,7529' + 'pci10ec,8168.3' + 'pci10ec,8168' + 'pciclass,020000' + 'pciclass,0200'
name='model' type=string items=1
value='Ethernet controller'
name='power-consumption' type=int items=2
value=00000001.00000001
name='devsel-speed' type=int items=1
value=00000000
name='interrupts' type=int items=1
value=00000001
name='subsystem-vendor-id' type=int items=1
value=00001462
name='subsystem-id' type=int items=1
value=00007529
name='unit-address' type=string items=1
value='0'
name='class-code' type=int items=1
value=00020000
name='revision-id' type=int items=1
value=00000003
name='vendor-id' type=int items=1
value=000010ec
name='device-id' type=int items=1
value=00008168
name='pci-msix-capid-pointer' type=int items=1
value=000000ac
name='pci-msi-capid-pointer' type=int items=1
value=00000050
Код: Выделить всё
rge "pci1462,7529"
Код: Выделить всё
update_drv rge
devfsadm -i rge
Я что-то не так сделал или всё-таки rge неправильный драйвер для этой железяки?
ps. как систему вернуть к жизни - знаю. а вот как сеть дать - не понимаю пока.