Не работает COM-порт на ноутбуке HP
Правила форума
Убедительная просьба юзать теги [code] при оформлении листингов.
Сообщения не оформленные должным образом имеют все шансы быть незамеченными.
Убедительная просьба юзать теги [code] при оформлении листингов.
Сообщения не оформленные должным образом имеют все шансы быть незамеченными.
-
bidjiz
- проходил мимо
- Сообщения: 4
- Зарегистрирован: 2013-03-14 12:11:15
Не работает COM-порт на ноутбуке HP
Установил FreeBSD 9.1 на ноутбук HP ProBook 6570b. После установки обнаружилось, что в системе отсутствует COM-порт (/dev/cuau*), vmstat и pciconf тоже ничего не показывают. Попробовал в device.hints прописать - не помогло. Под Виндой COM-порт работает. Что ещё можно сделать?
Услуги хостинговой компании Host-Food.ru
Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/
-
Alex Keda
- стреляли...
- Сообщения: 35456
- Зарегистрирован: 2004-10-18 14:25:19
- Откуда: Made in USSR
- Контактная информация:
Re: Не работает COM-порт на ноутбуке HP
выложить dmesg и pciconf -lvcb
Убей их всех! Бог потом рассортирует...
-
bidjiz
- проходил мимо
- Сообщения: 4
- Зарегистрирован: 2013-03-14 12:11:15
Re: Не работает COM-порт на ноутбуке HP
dmesg
device uart в конфиге ядра включён
pciconf -lvcb
device uart в конфиге ядра включён
Код: Выделить всё
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #2: Tue Apr 2 08:49:50 MSK 2013
root@notebook_freebsd:/usr/obj/usr/src/sys/PPS_KERNEL_3 i386
module_register: module acpi/uart already exists!
Module acpi/uart failed to register: 17
module_register: module isa/uart already exists!
Module isa/uart failed to register: 17
module_register: module pccard/uart already exists!
Module pccard/uart failed to register: 17
module_register: module pci/uart already exists!
Module pci/uart failed to register: 17
module_register: module puc/uart already exists!
Module puc/uart failed to register: 17
CPU: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (2494.39-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x306a9 Family = 6 Model = 3a Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x77bae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,RDRAND>
AMD Features=0x28100000<NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3021328384 (2881 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM 17AB >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110527/tbfadt-320)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.20.INTA
vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xd4000000-0xd43fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <IvyBridge mobile GT2 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xd4720000-0xd472ffff irq 10 at device 20.0 on pci0
xhci0: 32 byte context size.
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x4060-0x407f mem 0xd4700000-0xd471ffff,0xd473a000-0xd473afff irq 17 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 10:60:4b:4b:84:ae
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xd4739000-0xd47393ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci35: <ACPI PCI bus> on pcib3
fwohci0: <1394 Open Host Controller Interface> mem 0xd4500000-0xd45007ff,0xd4505000-0xd45050ff irq 18 at device 0.0 on pci35
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 ff:e4:73:ff:ff:ff:ff:fe
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata:: 0x5 loop=100, retry=100
fwohci0: fwphy_rddata:: 0x2 loop=100, retry=100
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: fe:e4:73:ff:ff:fe
fwe0: Ethernet address: fe:e4:73:ff:ff:fe
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: ff:e4:73:ff:ff:ff:ff:fe @ 0xfffe00000000, S400, maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x147c000
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata:: 0x1 loop=100, retry=100
fwohci0: fwphy_rddata:: 0x1 loop=100, retry=100
pci35: <base peripheral> at device 0.1 (no driver attached)
pci35: <base peripheral, SD host controller> at device 0.2 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci36: <ACPI PCI bus> on pcib4
pci36: <network> at device 0.0 (no driver attached)
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xd4738000-0xd47383ff irq 16 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0x4088-0x408f,0x4094-0x4097,0x4080-0x4087,0x4090-0x4093,0x4040-0x405f mem 0xd4737000-0xd47377ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
acpi_tz5: <Thermal Zone> on acpi0
acpi_tz6: <Thermal Zone> on acpi0
acpi_tz7: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
Failed to read extended capability bits
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xd0000-0xd0fff pnpid ORM0000 on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 8 ports with 8 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 6 ports with 6 removable, self powered
ugen1.3: <vendor 0x138a> at usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST9500423AS 0004HPM1> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <hp DVD A DS8A8SH KH63> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 9743711 Hz quality 1000
ugen1.4: <DCQGV019I2U0BX> at usbus1
Trying to mount root from ufs:/dev/ada0s3a [rw]...
WARNING: / was not properly dismounted
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.19
pid 1088 (ntpd), uid 0: exited on signal 11 (core dumped)
em0: link state changed to UP
ugen2.3: <JetFlash> at usbus2
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/11.00, addr 3> on usbus2
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:6:0:-1: Attached to scbus6
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <JetFlash Transcend 16GB 1100> Removable Direct Access SCSI-4 device
da0: 40.000MB/s transfers
da0: 15300MB (31334400 512 byte sectors: 255H 63S/T 1950C)
ext2fs: da0s1: wrong magic number 0xcae8 (expected 0xef53)
ugen2.3: <JetFlash> at usbus2 (disconnected)
umass0: at uhub4, port 2, addr 3 (disconnected)
(da0:umass-sim0:0:0:0): lost device - 0 outstanding, 1 refs
(da0:(pass2:umass-sim0:0:umass-sim0:0:0:0:0): removing device entry
0): passdevgonecb: devfs entry is gone
ugen2.3: <JetFlash> at usbus2
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/11.00, addr 3> on usbus2
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:6:0:-1: Attached to scbus6
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <JetFlash Transcend 16GB 1100> Removable Direct Access SCSI-4 device
da0: 40.000MB/s transfers
da0: 15300MB (31334400 512 byte sectors: 255H 63S/T 1950C)
Код: Выделить всё
hostb0@pci0:0:0:0: class=0x060000 card=0x17ab103c chip=0x01548086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = 'Ivy Bridge DRAM Controller'
class = bridge
subclass = HOST-PCI
cap 09[e0] = vendor (length 12) Intel cap 0 version 1
vgapci0@pci0:0:2:0: class=0x030000 card=0x17ab103c chip=0x01668086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
class = display
subclass = VGA
bar [10] = type Memory, range 64, base 0xd4000000, size 4194304, enabled
bar [18] = type Prefetchable Memory, range 64, base 0xc0000000, size 268435456, enabled
bar [20] = type I/O Port, range 32, base 0x4000, size 64, enabled
cap 05[90] = MSI supports 1 message
cap 01[d0] = powerspec 2 supports D0 D3 current D0
cap 13[a4] = PCI Advanced Features: FLR TP
xhci0@pci0:0:20:0: class=0x0c0330 card=0x17ab103c chip=0x1e318086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point USB xHCI Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 64, base 0xd4720000, size 65536, enabled
cap 01[70] = powerspec 2 supports D0 D3 current D0
cap 05[80] = MSI supports 8 messages, 64 bit
none0@pci0:0:22:0: class=0x078000 card=0x17ab103c chip=0x1e3a8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point MEI Controller'
class = simple comms
bar [10] = type Memory, range 64, base 0xd4734000, size 16, enabled
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 05[8c] = MSI supports 1 message, 64 bit
em0@pci0:0:25:0: class=0x020000 card=0x17ab103c chip=0x15038086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82579V Gigabit Network Connection'
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xd4700000, size 131072, enabled
bar [14] = type Memory, range 32, base 0xd473a000, size 4096, enabled
bar [18] = type I/O Port, range 32, base 0x4060, size 32, enabled
cap 01[c8] = powerspec 2 supports D0 D3 current D0
cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
cap 13[e0] = PCI Advanced Features: FLR TP
ehci0@pci0:0:26:0: class=0x0c0320 card=0x17ab103c chip=0x1e2d8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point USB Enhanced Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xd4739000, size 1024, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
cap 13[98] = PCI Advanced Features: FLR TP
none1@pci0:0:27:0: class=0x040300 card=0x17ab103c chip=0x1e208086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point High Definition Audio Controller'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 64, base 0xd4730000, size 16384, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 05[60] = MSI supports 1 message, 64 bit
cap 10[70] = PCI-Express 1 root endpoint max data 128(128) link x0(x0)
ecap 0002[100] = VC 1 max VC1
ecap 0005[130] = unknown 1
pcib1@pci0:0:28:0: class=0x060400 card=0x17ab103c chip=0x1e108086 rev=0xc4 hdr=0x01
vendor = 'Intel Corporation'
device = 'Panther Point PCI Express Root Port 1'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 2 root port max data 128(128) link x0(x1)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x17ab103c
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib2@pci0:0:28:1: class=0x060400 card=0x17ab103c chip=0x1e128086 rev=0xc4 hdr=0x01
vendor = 'Intel Corporation'
device = 'Panther Point PCI Express Root Port 2'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 2 root port max data 128(128) link x0(x1)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x17ab103c
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib3@pci0:0:28:2: class=0x060400 card=0x17ab103c chip=0x1e148086 rev=0xc4 hdr=0x01
vendor = 'Intel Corporation'
device = 'Panther Point PCI Express Root Port 3'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 2 root port max data 128(128) link x1(x1)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x17ab103c
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib4@pci0:0:28:3: class=0x060400 card=0x17ab103c chip=0x1e168086 rev=0xc4 hdr=0x01
vendor = 'Intel Corporation'
device = 'Panther Point PCI Express Root Port 4'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 2 root port max data 128(128) link x1(x1)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x17ab103c
cap 01[a0] = powerspec 2 supports D0 D3 current D0
ehci1@pci0:0:29:0: class=0x0c0320 card=0x17ab103c chip=0x1e268086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point USB Enhanced Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xd4738000, size 1024, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
cap 13[98] = PCI Advanced Features: FLR TP
isab0@pci0:0:31:0: class=0x060100 card=0x17ab103c chip=0x1e598086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point LPC Controller'
class = bridge
subclass = PCI-ISA
cap 09[e0] = vendor (length 12) Intel cap 1 version 0
features: AMT, 4 PCI-e x1 slots
ahci0@pci0:0:31:2: class=0x010601 card=0x17ab103c chip=0x1e038086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point 6 port SATA AHCI Controller'
class = mass storage
subclass = SATA
bar [10] = type I/O Port, range 32, base 0x4088, size 8, enabled
bar [14] = type I/O Port, range 32, base 0x4094, size 4, enabled
bar [18] = type I/O Port, range 32, base 0x4080, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0x4090, size 4, enabled
bar [20] = type I/O Port, range 32, base 0x4040, size 32, enabled
bar [24] = type Memory, range 32, base 0xd4737000, size 2048, enabled
cap 05[80] = MSI supports 1 message enabled with 1 message
cap 01[70] = powerspec 3 supports D0 D3 current D0
cap 12[a8] = SATA Index-Data Pair
cap 13[b0] = PCI Advanced Features: FLR TP
fwohci0@pci0:35:0:0: class=0x0c0010 card=0x17ab103c chip=0x2380197b rev=0x30 hdr=0x00
vendor = 'JMicron Technology Corp.'
device = 'IEEE 1394 Host Controller'
class = serial bus
subclass = FireWire
bar [10] = type Memory, range 32, base 0xd4500000, size 2048, enabled
bar [14] = type Memory, range 32, base 0xd4505000, size 256, enabled
cap 01[44] = powerspec 3 supports D0 D3 current D0
cap 10[80] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
cap 05[94] = MSI supports 1 message
none2@pci0:35:0:1: class=0x088000 card=0x17ab103c chip=0x2392197b rev=0x30 hdr=0x00
vendor = 'JMicron Technology Corp.'
device = 'SD/MMC Host Controller'
class = base peripheral
bar [10] = type Memory, range 32, base 0xd4504000, size 256, enabled
cap 01[a4] = powerspec 3 supports D0 D3 current D0
cap 10[80] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
cap 05[94] = MSI supports 1 message
none3@pci0:35:0:2: class=0x080501 card=0x17ab103c chip=0x2391197b rev=0x30 hdr=0x00
vendor = 'JMicron Technology Corp.'
device = 'Standard SD Host Controller'
class = base peripheral
subclass = SD host controller
bar [10] = type Memory, range 32, base 0xd4503000, size 256, enabled
cap 01[a4] = powerspec 3 supports D0 D3 current D0
cap 10[80] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
cap 05[94] = MSI supports 1 message
none4@pci0:36:0:0: class=0x028000 card=0x182c103c chip=0x435914e4 rev=0x00 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM43228 802.11a/b/g/n'
class = network
bar [10] = type Memory, range 64, base 0xd4400000, size 16384, enabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 09[58] = vendor (length 120)
cap 05[48] = MSI supports 1 message, 64 bit
cap 10[d0] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
ecap 0002[13c] = VC 1 max VC0
ecap 0003[160] = Serial 1 000023ffffbb6894
ecap 0004[16c] = unknown 1
-
BirdGovorun
- лейтенант
- Сообщения: 878
- Зарегистрирован: 2009-10-20 20:27:13
- Откуда: Харьков.
Re: Не работает COM-порт на ноутбуке HP
Вы случайно в ядре не удалили COM порт?bidjiz писал(а):root@notebook_freebsd:/usr/obj/usr/src/sys/PPS_KERNEL_3 i386
И на такую машину ставить i386, ну вы и извращенец.
-
Neus
- капитан
- Сообщения: 1980
- Зарегистрирован: 2008-09-08 21:59:56
Re: Не работает COM-порт на ноутбуке HP
чота много не опозналось
с ядром GENERIC загрузитесь
с ядром GENERIC загрузитесь
-
bidjiz
- проходил мимо
- Сообщения: 4
- Зарегистрирован: 2013-03-14 12:11:15
Re: Не работает COM-порт на ноутбуке HP
BirdGovorun , я не извращенец, я только учусь Мне i386 для совместимости с другими машинами нужен. COM-порт в ядре есть (device uart)
Neus , с GENERIC не лучше:
dmesg:
pciconf:
Мне i386 для совместимости с другими машинами нужен. COM-порт в ядре есть (device uart)Neus , с GENERIC не лучше:
dmesg:
Код: Выделить всё
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0: Tue Apr 2 11:41:44 MSK 2013
root@notebook_freebsd:/usr/obj/usr/src/sys/GENERIC i386
module_register: module acpi/uart already exists!
Module acpi/uart failed to register: 17
module_register: module isa/uart already exists!
Module isa/uart failed to register: 17
module_register: module pccard/uart already exists!
Module pccard/uart failed to register: 17
module_register: module pci/uart already exists!
Module pci/uart failed to register: 17
module_register: module puc/uart already exists!
Module puc/uart failed to register: 17
CPU: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (2494.39-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x306a9 Family = 6 Model = 3a Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x77bae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,RDRAND>
AMD Features=0x28100000<NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3021201408 (2881 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM 17AB >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110527/tbfadt-320)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.20.INTA
vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xd4000000-0xd43fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <IvyBridge mobile GT2 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xd4720000-0xd472ffff irq 10 at device 20.0 on pci0
xhci0: 32 byte context size.
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x4060-0x407f mem 0xd4700000-0xd471ffff,0xd473a000-0xd473afff irq 17 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 10:60:4b:4b:84:ae
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xd4739000-0xd47393ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel Panther Point HDA Controller> mem 0xd4730000-0xd4733fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci35: <ACPI PCI bus> on pcib3
fwohci0: <1394 Open Host Controller Interface> mem 0xd4500000-0xd45007ff,0xd4505000-0xd45050ff irq 18 at device 0.0 on pci35
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 ff:e4:73:ff:ff:ff:ff:fe
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata:: 0x5 loop=100, retry=100
fwohci0: fwphy_rddata:: 0x2 loop=100, retry=100
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: fe:e4:73:ff:ff:fe
fwe0: Ethernet address: fe:e4:73:ff:ff:fe
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: ff:e4:73:ff:ff:ff:ff:fe @ 0xfffe00000000, S400, maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x147c000
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata:: 0x1 loop=100, retry=100
fwohci0: fwphy_rddata:: 0x1 loop=100, retry=100
pci35: <base peripheral> at device 0.1 (no driver attached)
pci35: <base peripheral, SD host controller> at device 0.2 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci36: <ACPI PCI bus> on pcib4
pci36: <network> at device 0.0 (no driver attached)
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xd4738000-0xd47383ff irq 16 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0x4088-0x408f,0x4094-0x4097,0x4080-0x4087,0x4090-0x4093,0x4040-0x405f mem 0xd4737000-0xd47377ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
acpi_tz5: <Thermal Zone> on acpi0
acpi_tz6: <Thermal Zone> on acpi0
acpi_tz7: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
Failed to read extended capability bits
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xd0000-0xd0fff pnpid ORM0000 on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <IDT 92HD81B1X HDA CODEC> at cad 0 on hdac0
hdaa0: <IDT 92HD81B1X Audio Function Group> at nid 1 on hdacc0
pcm0: <IDT 92HD81B1X (Analog 2.0+HP/2.0)> at nid 13,11 and 12,15 on hdaa0
pcm1: <IDT 92HD81B1X (Analog)> at nid 10 and 17 on hdaa0
hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1
pcm3: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1
pcm4: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 8 ports with 8 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 6 ports with 6 removable, self powered
ugen1.3: <vendor 0x138a> at usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST9500423AS 0004HPM1> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <hp DVD A DS8A8SH KH63> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 9743706 Hz quality 1000
ugen1.4: <DCQGV019I2U0BX> at usbus1
Trying to mount root from ufs:/dev/ada0s3a [rw]...
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.19
pid 1089 (ntpd), uid 0: exited on signal 11 (core dumped)
em0: link state changed to UP
ugen2.3: <JetFlash> at usbus2
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/11.00, addr 3> on usbus2
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:6:0:-1: Attached to scbus6
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <JetFlash Transcend 16GB 1100> Removable Direct Access SCSI-4 device
da0: 40.000MB/s transfers
da0: 15300MB (31334400 512 byte sectors: 255H 63S/T 1950C)
Код: Выделить всё
hostb0@pci0:0:0:0: class=0x060000 card=0x17ab103c chip=0x01548086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = 'Ivy Bridge DRAM Controller'
class = bridge
subclass = HOST-PCI
cap 09[e0] = vendor (length 12) Intel cap 0 version 1
vgapci0@pci0:0:2:0: class=0x030000 card=0x17ab103c chip=0x01668086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
class = display
subclass = VGA
bar [10] = type Memory, range 64, base 0xd4000000, size 4194304, enabled
bar [18] = type Prefetchable Memory, range 64, base 0xc0000000, size 268435456, enabled
bar [20] = type I/O Port, range 32, base 0x4000, size 64, enabled
cap 05[90] = MSI supports 1 message
cap 01[d0] = powerspec 2 supports D0 D3 current D0
cap 13[a4] = PCI Advanced Features: FLR TP
xhci0@pci0:0:20:0: class=0x0c0330 card=0x17ab103c chip=0x1e318086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point USB xHCI Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 64, base 0xd4720000, size 65536, enabled
cap 01[70] = powerspec 2 supports D0 D3 current D0
cap 05[80] = MSI supports 8 messages, 64 bit
none0@pci0:0:22:0: class=0x078000 card=0x17ab103c chip=0x1e3a8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point MEI Controller'
class = simple comms
bar [10] = type Memory, range 64, base 0xd4734000, size 16, enabled
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 05[8c] = MSI supports 1 message, 64 bit
em0@pci0:0:25:0: class=0x020000 card=0x17ab103c chip=0x15038086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82579V Gigabit Network Connection'
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xd4700000, size 131072, enabled
bar [14] = type Memory, range 32, base 0xd473a000, size 4096, enabled
bar [18] = type I/O Port, range 32, base 0x4060, size 32, enabled
cap 01[c8] = powerspec 2 supports D0 D3 current D0
cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
cap 13[e0] = PCI Advanced Features: FLR TP
ehci0@pci0:0:26:0: class=0x0c0320 card=0x17ab103c chip=0x1e2d8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point USB Enhanced Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xd4739000, size 1024, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
cap 13[98] = PCI Advanced Features: FLR TP
hdac0@pci0:0:27:0: class=0x040300 card=0x17ab103c chip=0x1e208086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point High Definition Audio Controller'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 64, base 0xd4730000, size 16384, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 05[60] = MSI supports 1 message, 64 bit enabled with 1 message
cap 10[70] = PCI-Express 1 root endpoint max data 128(128) link x0(x0)
ecap 0002[100] = VC 1 max VC1
ecap 0005[130] = unknown 1
pcib1@pci0:0:28:0: class=0x060400 card=0x17ab103c chip=0x1e108086 rev=0xc4 hdr=0x01
vendor = 'Intel Corporation'
device = 'Panther Point PCI Express Root Port 1'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 2 root port max data 128(128) link x0(x1)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x17ab103c
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib2@pci0:0:28:1: class=0x060400 card=0x17ab103c chip=0x1e128086 rev=0xc4 hdr=0x01
vendor = 'Intel Corporation'
device = 'Panther Point PCI Express Root Port 2'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 2 root port max data 128(128) link x0(x1)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x17ab103c
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib3@pci0:0:28:2: class=0x060400 card=0x17ab103c chip=0x1e148086 rev=0xc4 hdr=0x01
vendor = 'Intel Corporation'
device = 'Panther Point PCI Express Root Port 3'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 2 root port max data 128(128) link x1(x1)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x17ab103c
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib4@pci0:0:28:3: class=0x060400 card=0x17ab103c chip=0x1e168086 rev=0xc4 hdr=0x01
vendor = 'Intel Corporation'
device = 'Panther Point PCI Express Root Port 4'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 2 root port max data 128(128) link x1(x1)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x17ab103c
cap 01[a0] = powerspec 2 supports D0 D3 current D0
ehci1@pci0:0:29:0: class=0x0c0320 card=0x17ab103c chip=0x1e268086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point USB Enhanced Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xd4738000, size 1024, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
cap 13[98] = PCI Advanced Features: FLR TP
isab0@pci0:0:31:0: class=0x060100 card=0x17ab103c chip=0x1e598086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point LPC Controller'
class = bridge
subclass = PCI-ISA
cap 09[e0] = vendor (length 12) Intel cap 1 version 0
features: AMT, 4 PCI-e x1 slots
ahci0@pci0:0:31:2: class=0x010601 card=0x17ab103c chip=0x1e038086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point 6 port SATA AHCI Controller'
class = mass storage
subclass = SATA
bar [10] = type I/O Port, range 32, base 0x4088, size 8, enabled
bar [14] = type I/O Port, range 32, base 0x4094, size 4, enabled
bar [18] = type I/O Port, range 32, base 0x4080, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0x4090, size 4, enabled
bar [20] = type I/O Port, range 32, base 0x4040, size 32, enabled
bar [24] = type Memory, range 32, base 0xd4737000, size 2048, enabled
cap 05[80] = MSI supports 1 message enabled with 1 message
cap 01[70] = powerspec 3 supports D0 D3 current D0
cap 12[a8] = SATA Index-Data Pair
cap 13[b0] = PCI Advanced Features: FLR TP
fwohci0@pci0:35:0:0: class=0x0c0010 card=0x17ab103c chip=0x2380197b rev=0x30 hdr=0x00
vendor = 'JMicron Technology Corp.'
device = 'IEEE 1394 Host Controller'
class = serial bus
subclass = FireWire
bar [10] = type Memory, range 32, base 0xd4500000, size 2048, enabled
bar [14] = type Memory, range 32, base 0xd4505000, size 256, enabled
cap 01[44] = powerspec 3 supports D0 D3 current D0
cap 10[80] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
cap 05[94] = MSI supports 1 message
none1@pci0:35:0:1: class=0x088000 card=0x17ab103c chip=0x2392197b rev=0x30 hdr=0x00
vendor = 'JMicron Technology Corp.'
device = 'SD/MMC Host Controller'
class = base peripheral
bar [10] = type Memory, range 32, base 0xd4504000, size 256, enabled
cap 01[a4] = powerspec 3 supports D0 D3 current D0
cap 10[80] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
cap 05[94] = MSI supports 1 message
none2@pci0:35:0:2: class=0x080501 card=0x17ab103c chip=0x2391197b rev=0x30 hdr=0x00
vendor = 'JMicron Technology Corp.'
device = 'Standard SD Host Controller'
class = base peripheral
subclass = SD host controller
bar [10] = type Memory, range 32, base 0xd4503000, size 256, enabled
cap 01[a4] = powerspec 3 supports D0 D3 current D0
cap 10[80] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
cap 05[94] = MSI supports 1 message
none3@pci0:36:0:0: class=0x028000 card=0x182c103c chip=0x435914e4 rev=0x00 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM43228 802.11a/b/g/n'
class = network
bar [10] = type Memory, range 64, base 0xd4400000, size 16384, enabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 09[58] = vendor (length 120)
cap 05[48] = MSI supports 1 message, 64 bit
cap 10[d0] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
ecap 0002[13c] = VC 1 max VC0
ecap 0003[160] = Serial 1 000023ffffbb6894
ecap 0004[16c] = unknown 1
-
BirdGovorun
- лейтенант
- Сообщения: 878
- Зарегистрирован: 2009-10-20 20:27:13
- Откуда: Харьков.
Re: Не работает COM-порт на ноутбуке HP
Половина железа не нашлось, может ноут Виндатозаточен.
Попробуйте в 10.0 посмотреть увидет или нет.
Попробуйте в 10.0 посмотреть увидет или нет.
-
bidjiz
- проходил мимо
- Сообщения: 4
- Зарегистрирован: 2013-03-14 12:11:15
Re: Не работает COM-порт на ноутбуке HP
Поставил 10.0. Вот что пишет
uname:
dmesg:
pciconf:
Попробовал Debian поставить - com работает
uname:
dmesg:
lspci:
uname:
Код: Выделить всё
FreeBSD notebook 10.0-CURRENT FreeBSD 10.0-CURRENT #0: Sat Mar 16 21:24:02 UTC 2013 root@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386
Код: Выделить всё
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #0: Sat Mar 16 21:24:02 UTC 2013
root@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386
FreeBSD clang version 3.2 (tags/RELEASE_32/final 170710) 20121221
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (2494.39-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x306a9 Family = 0x6 Model = 0x3a Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x77bae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,RDRAND>
AMD Features=0x28100000<NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3017682944 (2877 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM 17AB >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.20.INTA
vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xd4000000-0xd43fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <IvyBridge mobile GT2 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xd4720000-0xd472ffff irq 10 at device 20.0 on pci0
xhci0: 32 byte context size.
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.3.7> port 0x4060-0x407f mem 0xd4700000-0xd471ffff,0xd473a000-0xd473afff irq 17 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 10:60:4b:4b:84:ae
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xd4739000-0xd47393ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel Panther Point HDA Controller> mem 0xd4730000-0xd4733fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci35: <ACPI PCI bus> on pcib3
pci35: <serial bus, FireWire> at device 0.0 (no driver attached)
pci35: <base peripheral> at device 0.1 (no driver attached)
sdhci_pci0: <Generic SD HCI> mem 0xd4503000-0xd45030ff irq 18 at device 0.2 on pci35
sdhci_pci0: 1 slot(s) allocated
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci36: <ACPI PCI bus> on pcib4
pci36: <network> at device 0.0 (no driver attached)
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xd4738000-0xd47383ff irq 16 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0x4088-0x408f,0x4094-0x4097,0x4080-0x4087,0x4090-0x4093,0x4040-0x405f mem 0xd4737000-0xd47377ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
acpi_tz5: <Thermal Zone> on acpi0
acpi_tz6: <Thermal Zone> on acpi0
acpi_tz7: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xd0000-0xd0fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <IDT 92HD81B1X HDA CODEC> at cad 0 on hdac0
hdaa0: <IDT 92HD81B1X Audio Function Group> at nid 1 on hdacc0
pcm0: <IDT 92HD81B1X (Analog 2.0+HP/2.0)> at nid 13,11 and 12,15 on hdaa0
pcm1: <IDT 92HD81B1X (Analog)> at nid 10 and 17 on hdaa0
hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1
pcm3: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1
pcm4: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen1.1: <Intel> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <0x8086> at usbus0
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST9500423AS 0004HPM1> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ses0 at ahciem0 bus 0 scbus5 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <hp DVD A DS8A8SH KH63> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1247194460 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
uhub1: 8 ports with 8 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
Root mount waiting for: usbus2 usbus1
uhub4: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen1.3: <vendor 0x138a> at usbus1
ugen2.3: <Broadcom Corp> at usbus2
ugen1.4: <DCQGV019I2U0BX> at usbus1
Trying to mount root from ufs:/dev/ada0s3a [rw]...
ugen1.5: <JetFlash> at usbus1
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.10/a.00, addr 5> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:8:0:-1: Attached to scbus8
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <JetFlash Transcend 16GB 1.00> Removable Direct Access SCSI-5 device
da0: 40.000MB/s transfers
da0: 15090MB (30904320 512 byte sectors: 255H 63S/T 1923C)
Код: Выделить всё
hostb0@pci0:0:0:0: class=0x060000 card=0x17ab103c chip=0x01548086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '3rd Gen Core processor DRAM Controller'
class = bridge
subclass = HOST-PCI
cap 09[e0] = vendor (length 12) Intel cap 0 version 1
vgapci0@pci0:0:2:0: class=0x030000 card=0x17ab103c chip=0x01668086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '3rd Gen Core processor Graphics Controller'
class = display
subclass = VGA
bar [10] = type Memory, range 64, base 0xd4000000, size 4194304, enabled
bar [18] = type Prefetchable Memory, range 64, base 0xc0000000, size 268435456, enabled
bar [20] = type I/O Port, range 32, base 0x4000, size 64, enabled
cap 05[90] = MSI supports 1 message
cap 01[d0] = powerspec 2 supports D0 D3 current D0
cap 13[a4] = PCI Advanced Features: FLR TP
xhci0@pci0:0:20:0: class=0x0c0330 card=0x17ab103c chip=0x1e318086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '7 Series/C210 Series Chipset Family USB xHCI Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 64, base 0xd4720000, size 65536, enabled
cap 01[70] = powerspec 2 supports D0 D3 current D0
cap 05[80] = MSI supports 8 messages, 64 bit
none0@pci0:0:22:0: class=0x078000 card=0x17ab103c chip=0x1e3a8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '7 Series/C210 Series Chipset Family MEI Controller'
class = simple comms
bar [10] = type Memory, range 64, base 0xd4734000, size 16, enabled
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 05[8c] = MSI supports 1 message, 64 bit
em0@pci0:0:25:0: class=0x020000 card=0x17ab103c chip=0x15038086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82579V Gigabit Network Connection'
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xd4700000, size 131072, enabled
bar [14] = type Memory, range 32, base 0xd473a000, size 4096, enabled
bar [18] = type I/O Port, range 32, base 0x4060, size 32, enabled
cap 01[c8] = powerspec 2 supports D0 D3 current D0
cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
cap 13[e0] = PCI Advanced Features: FLR TP
ehci0@pci0:0:26:0: class=0x0c0320 card=0x17ab103c chip=0x1e2d8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '7 Series/C210 Series Chipset Family USB Enhanced Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xd4739000, size 1024, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
cap 13[98] = PCI Advanced Features: FLR TP
hdac0@pci0:0:27:0: class=0x040300 card=0x17ab103c chip=0x1e208086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '7 Series/C210 Series Chipset Family High Definition Audio Controller'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 64, base 0xd4730000, size 16384, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 05[60] = MSI supports 1 message, 64 bit enabled with 1 message
cap 10[70] = PCI-Express 1 root endpoint max data 128(128) FLR link x0(x0)
ecap 0002[100] = VC 1 max VC1
ecap 0005[130] = Root Complex Link Declaration 1
pcib1@pci0:0:28:0: class=0x060400 card=0x17ab103c chip=0x1e108086 rev=0xc4 hdr=0x01
vendor = 'Intel Corporation'
device = '7 Series/C210 Series Chipset Family PCI Express Root Port 1'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 2 root port slot max data 128(128) link x0(x1)
speed 0.0(5.0)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x17ab103c
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib2@pci0:0:28:1: class=0x060400 card=0x17ab103c chip=0x1e128086 rev=0xc4 hdr=0x01
vendor = 'Intel Corporation'
device = '7 Series/C210 Series Chipset Family PCI Express Root Port 2'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 2 root port slot max data 128(128) link x0(x1)
speed 0.0(5.0)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x17ab103c
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib3@pci0:0:28:2: class=0x060400 card=0x17ab103c chip=0x1e148086 rev=0xc4 hdr=0x01
vendor = 'Intel Corporation'
device = '7 Series/C210 Series Chipset Family PCI Express Root Port 3'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 2 root port slot max data 128(128) link x1(x1)
speed 2.5(5.0)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x17ab103c
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib4@pci0:0:28:3: class=0x060400 card=0x17ab103c chip=0x1e168086 rev=0xc4 hdr=0x01
vendor = 'Intel Corporation'
device = '7 Series/C210 Series Chipset Family PCI Express Root Port 4'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 2 root port slot max data 128(128) link x1(x1)
speed 2.5(5.0)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x17ab103c
cap 01[a0] = powerspec 2 supports D0 D3 current D0
ehci1@pci0:0:29:0: class=0x0c0320 card=0x17ab103c chip=0x1e268086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '7 Series/C210 Series Chipset Family USB Enhanced Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xd4738000, size 1024, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
cap 13[98] = PCI Advanced Features: FLR TP
isab0@pci0:0:31:0: class=0x060100 card=0x17ab103c chip=0x1e598086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'HM76 Express Chipset LPC Controller'
class = bridge
subclass = PCI-ISA
cap 09[e0] = vendor (length 12) Intel cap 1 version 0
features: AMT, 4 PCI-e x1 slots
ahci0@pci0:0:31:2: class=0x010601 card=0x17ab103c chip=0x1e038086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '7 Series Chipset Family 6-port SATA Controller [AHCI mode]'
class = mass storage
subclass = SATA
bar [10] = type I/O Port, range 32, base 0x4088, size 8, enabled
bar [14] = type I/O Port, range 32, base 0x4094, size 4, enabled
bar [18] = type I/O Port, range 32, base 0x4080, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0x4090, size 4, enabled
bar [20] = type I/O Port, range 32, base 0x4040, size 32, enabled
bar [24] = type Memory, range 32, base 0xd4737000, size 2048, enabled
cap 05[80] = MSI supports 1 message enabled with 1 message
cap 01[70] = powerspec 3 supports D0 D3 current D0
cap 12[a8] = SATA Index-Data Pair
cap 13[b0] = PCI Advanced Features: FLR TP
none1@pci0:35:0:0: class=0x0c0010 card=0x17ab103c chip=0x2380197b rev=0x30 hdr=0x00
vendor = 'JMicron Technology Corp.'
device = 'IEEE 1394 Host Controller'
class = serial bus
subclass = FireWire
bar [10] = type Memory, range 32, base 0xd4500000, size 2048, enabled
bar [14] = type Memory, range 32, base 0xd4505000, size 256, enabled
cap 01[44] = powerspec 3 supports D0 D3 current D0
cap 10[80] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
speed 2.5(2.5)
cap 05[94] = MSI supports 1 message
none2@pci0:35:0:1: class=0x088000 card=0x17ab103c chip=0x2392197b rev=0x30 hdr=0x00
vendor = 'JMicron Technology Corp.'
device = 'SD/MMC Host Controller'
class = base peripheral
bar [10] = type Memory, range 32, base 0xd4504000, size 256, enabled
cap 01[a4] = powerspec 3 supports D0 D3 current D0
cap 10[80] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
speed 2.5(2.5)
cap 05[94] = MSI supports 1 message
sdhci_pci0@pci0:35:0:2: class=0x080501 card=0x17ab103c chip=0x2391197b rev=0x30 hdr=0x00
vendor = 'JMicron Technology Corp.'
device = 'Standard SD Host Controller'
class = base peripheral
subclass = SD host controller
bar [10] = type Memory, range 32, base 0xd4503000, size 256, enabled
cap 01[a4] = powerspec 3 supports D0 D3 current D0
cap 10[80] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
speed 2.5(2.5)
cap 05[94] = MSI supports 1 message
none3@pci0:36:0:0: class=0x028000 card=0x182c103c chip=0x435914e4 rev=0x00 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM43228 802.11a/b/g/n'
class = network
bar [10] = type Memory, range 64, base 0xd4400000, size 16384, enabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 09[58] = vendor (length 120)
cap 05[48] = MSI supports 1 message, 64 bit
cap 10[d0] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
speed 2.5(2.5)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
ecap 0002[13c] = VC 1 max VC0
ecap 0003[160] = Serial 1 000023ffffbb6894
ecap 0004[16c] = Power Budgeting 1
uname:
Код: Выделить всё
Linux debian 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux
Код: Выделить всё
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-46) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 10:07:46 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=54cee0bb-701b-4ec5-863d-0dce9ac40eb7 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
[ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
[ 0.000000] BIOS-e820: 0000000040005000 - 00000000b8b74000 (usable)
[ 0.000000] BIOS-e820: 00000000b8b74000 - 00000000b9d3d000 (reserved)
[ 0.000000] BIOS-e820: 00000000b9d3d000 - 00000000b9faf000 (usable)
[ 0.000000] BIOS-e820: 00000000b9faf000 - 00000000b9fbd000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b9fbd000 - 00000000b9fff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b9fff000 - 00000000ba000000 (usable)
[ 0.000000] BIOS-e820: 00000000ba000000 - 00000000bf200000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013fe00000 (usable)
[ 0.000000] DMI 2.7 present.
[ 0.000000] last_pfn = 0x13fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 13FE00000 mask FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xba000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000ba000000
[ 0.000000] 0000000000 - 00ba000000 page 2M
[ 0.000000] kernel direct mapping tables up to ba000000 @ 8000-c000
[ 0.000000] init_memory_mapping: 0000000100000000-000000013fe00000
[ 0.000000] 0100000000 - 013fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 13fe00000 @ a000-10000
[ 0.000000] RAMDISK: 1775d000 - 1803f705
[ 0.000000] ACPI: RSDP 00000000000f2f10 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000b9ffe120 0008C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
[ 0.000000] ACPI: FACP 00000000b9ffc000 0010C (v05 HPQOEM 17AB 0000000F HP 00000001)
[ 0.000000] ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 (20090903/tbfadt-288)
[ 0.000000] ACPI: DSDT 00000000b9fd4000 22FB4 (v02 HPQOEM 17AB 00000001 INTL 20110112)
[ 0.000000] ACPI: FACS 00000000b9cf2000 00040
[ 0.000000] ACPI: HPET 00000000b9ffb000 00038 (v01 HPQOEM 17AB 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 00000000b9ffa000 000BC (v01 HPQOEM 17AB 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 00000000b9ff9000 0003C (v01 HPQOEM 17AB 00000001 HP 00000001)
[ 0.000000] ACPI: ASF! 00000000b9ff8000 000A5 (v32 HPQOEM 17AB 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 00000000b9ff7000 00032 (v02 HPQOEM 17AB 00000000 HP 00000001)
[ 0.000000] ACPI: SSDT 00000000b9fd1000 002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112)
[ 0.000000] ACPI: SSDT 00000000b9fd0000 0048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
[ 0.000000] ACPI: SLIC 00000000b9fcf000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: FPDT 00000000b9fcd000 00044 (v01 HPQOEM 17AB 00000001 HP 00000001)
[ 0.000000] ACPI: BGRT 00000000b9fcc000 00038 (v00 HPQOEM 17AB 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 00000000b9fcb000 00974 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 00000000b9fca000 00AAD (v01 PmRef CpuPm 00003000 INTL 20110112)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000013fe00000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000013fe00000
[ 0.000000] NODE_DATA [000000000000b000 - 0000000000012fff]
[ 0.000000] bootmap [0000000000013000 - 000000000003afbf] pages 28
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 013fe00000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00016d9584] TEXT DATA BSS ==> [0001000000 - 00016d9584]
[ 0.000000] #3 [001775d000 - 001803f705] RAMDISK ==> [001775d000 - 001803f705]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [00016da000 - 00016da231] BRK ==> [00016da000 - 00016da231]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001800000-ffff880004ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0013fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040004
[ 0.000000] 0: 0x00040005 -> 0x000b8b74
[ 0.000000] 0: 0x000b9d3d -> 0x000b9faf
[ 0.000000] 0: 0x000b9fff -> 0x000ba000
[ 0.000000] 0: 0x00100000 -> 0x0013fe00
[ 0.000000] On node 0 totalpages: 1018243
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 104 pages reserved
[ 0.000000] DMA zone: 3837 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 738334 pages, LIFO batch:31
[ 0.000000] Normal zone: 3577 pages used for memmap
[ 0.000000] Normal zone: 258055 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000b8b74000 - 00000000b9d3d000
[ 0.000000] PM: Registered nosave memory: 00000000b9faf000 - 00000000b9fbd000
[ 0.000000] PM: Registered nosave memory: 00000000b9fbd000 - 00000000b9fff000
[ 0.000000] PM: Registered nosave memory: 00000000ba000000 - 00000000bf200000
[ 0.000000] PM: Registered nosave memory: 00000000bf200000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
[ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bf200000 (gap: bf200000:20e00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005200000 s90328 r8192 d24360 u262144
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1000226
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=54cee0bb-701b-4ec5-863d-0dce9ac40eb7 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff8800053de000 - ffff8800093de000
[ 0.000000] software IO TLB at phys 0x53de000 - 0x93de000
[ 0.000000] Memory: 3932156k/5240832k available (3083k kernel code, 1167860k absent, 140816k reserved, 2048k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:472
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2494.294 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.58 BogoMIPS (lpj=9977176)
[ 0.000014] Security Framework initialized
[ 0.000017] SELinux: Disabled at boot.
[ 0.000259] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001256] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001693] Mount-cache hash table entries: 256
[ 0.001777] Initializing cgroup subsys ns
[ 0.001780] Initializing cgroup subsys cpuacct
[ 0.001782] Initializing cgroup subsys devices
[ 0.001784] Initializing cgroup subsys freezer
[ 0.001785] Initializing cgroup subsys net_cls
[ 0.001802] CPU: Physical Processor ID: 0
[ 0.001803] CPU: Processor Core ID: 0
[ 0.001806] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001808] CPU: L2 cache: 256K
[ 0.001809] CPU: L3 cache: 3072K
[ 0.001811] CPU 0/0x0 -> Node 0
[ 0.001814] mce: CPU supports 7 MCE banks
[ 0.001824] CPU0: Thermal monitoring enabled (TM1)
[ 0.001826] CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6
[ 0.001833] using mwait in idle threads.
[ 0.001834] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.001837] ... version: 3
[ 0.001838] ... bit width: 48
[ 0.001839] ... generic registers: 4
[ 0.001840] ... value mask: 0000ffffffffffff
[ 0.001842] ... max period: 000000007fffffff
[ 0.001843] ... fixed-purpose events: 3
[ 0.001844] ... event mask: 000000070000000f
[ 0.002672] ACPI: Core revision 20090903
[ 0.072954] Not enabling x2apic, Intr-remapping init failed.
[ 0.072956] Setting APIC routing to flat
[ 0.073309] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.112941] CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz stepping 09
[ 0.219963] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.230209] Initializing CPU#1
[ 0.307775] CPU: Physical Processor ID: 0
[ 0.307776] CPU: Processor Core ID: 0
[ 0.307779] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.307781] CPU: L2 cache: 256K
[ 0.307782] CPU: L3 cache: 3072K
[ 0.307785] CPU 1/0x1 -> Node 0
[ 0.307797] CPU1: Thermal monitoring enabled (TM1)
[ 0.307799] CPU 1 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6
[ 0.307892] CPU1: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz stepping 09
[ 0.307900] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.327935] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.338163] Initializing CPU#2
[ 0.415633] CPU: Physical Processor ID: 0
[ 0.415634] CPU: Processor Core ID: 1
[ 0.415637] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.415638] CPU: L2 cache: 256K
[ 0.415639] CPU: L3 cache: 3072K
[ 0.415641] CPU 2/0x2 -> Node 0
[ 0.415652] CPU2: Thermal monitoring enabled (TM1)
[ 0.415654] CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6
[ 0.415665] CPU2: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz stepping 09
[ 0.415671] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.435706] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.445933] Initializing CPU#3
[ 0.523492] CPU: Physical Processor ID: 0
[ 0.523493] CPU: Processor Core ID: 1
[ 0.523495] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.523496] CPU: L2 cache: 256K
[ 0.523497] CPU: L3 cache: 3072K
[ 0.523499] CPU 3/0x3 -> Node 0
[ 0.523510] CPU3: Thermal monitoring enabled (TM1)
[ 0.523511] CPU 3 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6
[ 0.523532] CPU3: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz stepping 09
[ 0.523538] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.543531] Brought up 4 CPUs
[ 0.543533] Total of 4 processors activated (19954.49 BogoMIPS).
[ 0.545519] CPU0 attaching sched-domain:
[ 0.545521] domain 0: span 0-1 level SIBLING
[ 0.545523] groups: group ffff88000520fae0 cpus 0 (cpu_power = 589) group ffff88000524fae0 cpus 1 (cpu_power = 589)
[ 0.545528] domain 1: span 0-3 level MC
[ 0.545529] groups: group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178)
[ 0.545535] CPU1 attaching sched-domain:
[ 0.545537] domain 0: span 0-1 level SIBLING
[ 0.545538] groups: group ffff88000524fae0 cpus 1 (cpu_power = 589) group ffff88000520fae0 cpus 0 (cpu_power = 589)
[ 0.545542] domain 1: span 0-3 level MC
[ 0.545543] groups: group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178)
[ 0.545548] CPU2 attaching sched-domain:
[ 0.545549] domain 0: span 2-3 level SIBLING
[ 0.545550] groups: group ffff88000528fae0 cpus 2 (cpu_power = 589) group ffff8800052cfae0 cpus 3 (cpu_power = 589)
[ 0.545554] domain 1: span 0-3 level MC
[ 0.545556] groups: group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178)
[ 0.545560] CPU3 attaching sched-domain:
[ 0.545561] domain 0: span 2-3 level SIBLING
[ 0.545563] groups: group ffff8800052cfae0 cpus 3 (cpu_power = 589) group ffff88000528fae0 cpus 2 (cpu_power = 589)
[ 0.545567] domain 1: span 0-3 level MC
[ 0.545568] groups: group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178)
[ 0.545747] devtmpfs: initialized
[ 0.548585] regulator: core version 0.5
[ 0.548615] NET: Registered protocol family 16
[ 0.548672] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.548674] ACPI: bus type pci registered
[ 0.548729] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.548731] PCI: MCFG area at e0000000 reserved in E820
[ 0.557443] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.557444] PCI: Using configuration type 1 for base access
[ 0.557732] bio: create slab <bio-0> at 0
[ 0.558666] ACPI: EC: Look up EC in DSDT
[ 0.561527] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.578506] ACPI: BIOS _OSI(Linux) query ignored
[ 0.618701] ACPI: Interpreter enabled
[ 0.618704] ACPI: (supports S0 S3 S4 S5)
[ 0.618724] ACPI: Using IOAPIC for interrupt routing
[ 0.629044] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.629105] ACPI: Power Resource [APPR] (off)
[ 0.629281] ACPI: Power Resource [COMP] (off)
[ 0.629659] ACPI: No dock devices found.
[ 0.630694] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.630763] pci 0000:00:02.0: reg 10 64bit mmio: [0xd4000000-0xd43fffff]
[ 0.630768] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.630771] pci 0000:00:02.0: reg 20 io port: [0x4000-0x403f]
[ 0.630840] pci 0000:00:14.0: reg 10 64bit mmio: [0xd4720000-0xd472ffff]
[ 0.630895] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.630898] pci 0000:00:14.0: PME# disabled
[ 0.630943] pci 0000:00:16.0: reg 10 64bit mmio: [0xd4734000-0xd473400f]
[ 0.631003] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.631007] pci 0000:00:16.0: PME# disabled
[ 0.631055] pci 0000:00:19.0: reg 10 32bit mmio: [0xd4700000-0xd471ffff]
[ 0.631061] pci 0000:00:19.0: reg 14 32bit mmio: [0xd473a000-0xd473afff]
[ 0.631068] pci 0000:00:19.0: reg 18 io port: [0x4060-0x407f]
[ 0.631119] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.631123] pci 0000:00:19.0: PME# disabled
[ 0.631170] pci 0000:00:1a.0: reg 10 32bit mmio: [0xd4739000-0xd47393ff]
[ 0.631240] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.631244] pci 0000:00:1a.0: PME# disabled
[ 0.631284] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd4730000-0xd4733fff]
[ 0.631336] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.631340] pci 0000:00:1b.0: PME# disabled
[ 0.631425] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.631429] pci 0000:00:1c.0: PME# disabled
[ 0.631519] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.631523] pci 0000:00:1c.1: PME# disabled
[ 0.631609] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.631613] pci 0000:00:1c.2: PME# disabled
[ 0.631699] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.631702] pci 0000:00:1c.3: PME# disabled
[ 0.631757] pci 0000:00:1d.0: reg 10 32bit mmio: [0xd4738000-0xd47383ff]
[ 0.631828] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.631832] pci 0000:00:1d.0: PME# disabled
[ 0.631975] pci 0000:00:1f.2: reg 10 io port: [0x4088-0x408f]
[ 0.631981] pci 0000:00:1f.2: reg 14 io port: [0x4094-0x4097]
[ 0.631986] pci 0000:00:1f.2: reg 18 io port: [0x4080-0x4087]
[ 0.631992] pci 0000:00:1f.2: reg 1c io port: [0x4090-0x4093]
[ 0.631997] pci 0000:00:1f.2: reg 20 io port: [0x4040-0x405f]
[ 0.632003] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd4737000-0xd47377ff]
[ 0.632045] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.632048] pci 0000:00:1f.2: PME# disabled
[ 0.632101] pci 0000:00:1c.0: bridge 32bit mmio: [0xd4600000-0xd46fffff]
[ 0.632143] pci 0000:00:1c.1: bridge io port: [0x2000-0x3fff]
[ 0.632147] pci 0000:00:1c.1: bridge 32bit mmio: [0xd0000000-0xd3ffffff]
[ 0.632219] pci 0000:23:00.0: reg 10 32bit mmio: [0xd4500000-0xd45007ff]
[ 0.632231] pci 0000:23:00.0: reg 14 32bit mmio: [0xd4505000-0xd45050ff]
[ 0.632477] pci 0000:23:00.1: reg 10 32bit mmio: [0xd4504000-0xd45040ff]
[ 0.632541] pci 0000:23:00.1: reg 30 32bit mmio pref: [0xffff8000-0xffffffff]
[ 0.632716] pci 0000:23:00.2: reg 10 32bit mmio: [0xd4503000-0xd45030ff]
[ 0.632986] pci 0000:00:1c.2: bridge 32bit mmio: [0xd4500000-0xd45fffff]
[ 0.633096] pci 0000:24:00.0: reg 10 64bit mmio: [0xd4400000-0xd4403fff]
[ 0.633225] pci 0000:24:00.0: supports D1 D2
[ 0.633226] pci 0000:24:00.0: PME# supported from D0 D3hot D3cold
[ 0.633233] pci 0000:24:00.0: PME# disabled
[ 0.633318] pci 0000:00:1c.3: bridge 32bit mmio: [0xd4400000-0xd44fffff]
[ 0.633346] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.633590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.633662] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.633795] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.633898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.649045] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.649162] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.649276] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.649391] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.649506] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.649620] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.649735] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.649847] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.649939] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.649945] vgaarb: loaded
[ 0.649985] PCI: Using ACPI for IRQ routing
[ 0.650162] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.650167] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.652181] Switching to clocksource tsc
[ 0.652938] pnp: PnP ACPI init
[ 0.652944] ACPI: bus type pnp registered
[ 0.655655] alloc irq_desc for 23 on node 0
[ 0.655657] alloc kstat_irqs on node 0
[ 0.656630] pnp: PnP ACPI: found 14 devices
[ 0.656631] ACPI: ACPI bus type pnp unregistered
[ 0.656638] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.656640] system 00:01: iomem range 0xfed10000-0xfed17fff could not be reserved
[ 0.656642] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.656644] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.656646] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.656648] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.656650] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
[ 0.656652] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.656655] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.656660] system 00:07: ioport range 0x200-0x27f has been reserved
[ 0.656662] system 00:07: ioport range 0x1000-0x100f has been reserved
[ 0.656664] system 00:07: ioport range 0xffff-0xffff has been reserved
[ 0.656666] system 00:07: ioport range 0xffff-0xffff has been reserved
[ 0.656667] system 00:07: ioport range 0x400-0x47f has been reserved
[ 0.656669] system 00:07: ioport range 0x500-0x57f has been reserved
[ 0.656671] system 00:07: ioport range 0xef80-0xef9f has been reserved
[ 0.656676] system 00:0d: iomem range 0x20000000-0x201fffff has been reserved
[ 0.656678] system 00:0d: iomem range 0x40004000-0x40004fff has been reserved
[ 0.661296] pci 0000:23:00.1: BAR 6: no parent found for of device [0xffff8000-0xffffffff]
[ 0.661388] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.661389] pci 0000:00:1c.0: IO window: disabled
[ 0.661394] pci 0000:00:1c.0: MEM window: 0xd4600000-0xd46fffff
[ 0.661398] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.661404] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.661407] pci 0000:00:1c.1: IO window: 0x2000-0x3fff
[ 0.661413] pci 0000:00:1c.1: MEM window: 0xd0000000-0xd3ffffff
[ 0.661417] pci 0000:00:1c.1: PREFETCH window: 0x000000bf200000-0x000000bf3fffff
[ 0.661424] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:23
[ 0.661425] pci 0000:00:1c.2: IO window: disabled
[ 0.661430] pci 0000:00:1c.2: MEM window: 0xd4500000-0xd45fffff
[ 0.661434] pci 0000:00:1c.2: PREFETCH window: 0xbf400000-0xbf4fffff
[ 0.661441] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:24
[ 0.661442] pci 0000:00:1c.3: IO window: disabled
[ 0.661447] pci 0000:00:1c.3: MEM window: 0xd4400000-0xd44fffff
[ 0.661451] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.661465] alloc irq_desc for 17 on node -1
[ 0.661466] alloc kstat_irqs on node -1
[ 0.661470] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.661474] pci 0000:00:1c.0: setting latency timer to 64
[ 0.661483] alloc irq_desc for 16 on node -1
[ 0.661484] alloc kstat_irqs on node -1
[ 0.661486] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.661490] pci 0000:00:1c.1: setting latency timer to 64
[ 0.661497] alloc irq_desc for 18 on node -1
[ 0.661498] alloc kstat_irqs on node -1
[ 0.661501] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.661505] pci 0000:00:1c.2: setting latency timer to 64
[ 0.661513] alloc irq_desc for 19 on node -1
[ 0.661514] alloc kstat_irqs on node -1
[ 0.661516] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.661520] pci 0000:00:1c.3: setting latency timer to 64
[ 0.661524] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.661526] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.661528] pci_bus 0000:01: resource 1 mem: [0xd4600000-0xd46fffff]
[ 0.661530] pci_bus 0000:02: resource 0 io: [0x2000-0x3fff]
[ 0.661531] pci_bus 0000:02: resource 1 mem: [0xd0000000-0xd3ffffff]
[ 0.661533] pci_bus 0000:02: resource 2 pref mem [0xbf200000-0xbf3fffff]
[ 0.661535] pci_bus 0000:23: resource 1 mem: [0xd4500000-0xd45fffff]
[ 0.661536] pci_bus 0000:23: resource 2 pref mem [0xbf400000-0xbf4fffff]
[ 0.661538] pci_bus 0000:24: resource 1 mem: [0xd4400000-0xd44fffff]
[ 0.661556] NET: Registered protocol family 2
[ 0.661661] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.662327] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.663839] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.664026] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.664027] TCP reno registered
[ 0.664094] NET: Registered protocol family 1
[ 0.664105] pci 0000:00:02.0: Boot video device
[ 0.664115] pci 0000:00:14.0: enabling device (0000 -> 0002)
[ 0.664120] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.664121] pci 0000:00:14.0: PCI INT A: no GSI - using IRQ 10
[ 0.664159] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.664170] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.664190] pci 0000:00:1a.0: PCI INT A disabled
[ 0.664203] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.664220] pci 0000:00:1d.0: PCI INT A disabled
[ 0.664256] Unpacking initramfs...
[ 0.820130] Freeing initrd memory: 9097k freed
[ 0.821440] audit: initializing netlink socket (disabled)
[ 0.821448] type=2000 audit(1365683594.623:1): initialized
[ 0.824164] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.825006] VFS: Disk quotas dquot_6.5.2
[ 0.825039] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.825088] msgmni has been set to 7697
[ 0.825227] alg: No test for stdrng (krng)
[ 0.825256] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.825258] io scheduler noop registered
[ 0.825260] io scheduler anticipatory registered
[ 0.825261] io scheduler deadline registered
[ 0.825296] io scheduler cfq registered (default)
[ 0.825385] alloc irq_desc for 24 on node -1
[ 0.825386] alloc kstat_irqs on node -1
[ 0.825396] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.825405] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.825501] alloc irq_desc for 25 on node -1
[ 0.825502] alloc kstat_irqs on node -1
[ 0.825509] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.825517] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.825615] alloc irq_desc for 26 on node -1
[ 0.825616] alloc kstat_irqs on node -1
[ 0.825623] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.825631] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.825723] alloc irq_desc for 27 on node -1
[ 0.825724] alloc kstat_irqs on node -1
[ 0.825731] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.825738] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.826662] Linux agpgart interface v0.103
[ 0.826684] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.829075] serial 00:09: activated
[ 0.829217] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.829317] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.829355] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.831215] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.831972] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.831976] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.831978] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.831980] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.831982] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.832032] mice: PS/2 mouse device common for all mice
[ 0.832061] rtc_cmos 00:08: RTC can wake from S4
[ 0.832082] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.832110] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.832117] cpuidle: using governor ladder
[ 0.832118] cpuidle: using governor menu
[ 0.832121] No iBFT detected.
[ 0.832306] TCP cubic registered
[ 0.832373] NET: Registered protocol family 10
[ 0.832802] Mobile IPv6
[ 0.832804] NET: Registered protocol family 17
[ 0.832845] PM: Resume from disk failed.
[ 0.832850] registered taskstats version 1
[ 0.833328] rtc_cmos 00:08: setting system clock to 2013-04-11 12:33:14 UTC (1365683594)
[ 0.833375] Initalizing network drop monitor service
[ 0.833393] Freeing unused kernel memory: 592k freed
[ 0.833458] Write protecting the kernel read-only data: 4240k
[ 0.842912] udev[76]: starting version 164
[ 0.858091] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.900393] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[ 0.900395] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 0.900425] e1000e 0000:00:19.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.900435] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.900532] alloc irq_desc for 28 on node -1
[ 0.900534] alloc kstat_irqs on node -1
[ 0.900548] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 0.901946] usbcore: registered new interface driver usbfs
[ 0.901968] usbcore: registered new interface driver hub
[ 0.904843] usbcore: registered new device driver usb
[ 0.913448] SCSI subsystem initialized
[ 0.915104] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.915113] ACPI: Thermal Zone [CPUZ] (47 C)
[ 0.915273] firewire_ohci 0000:23:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.915284] firewire_ohci 0000:23:00.0: setting latency timer to 64
[ 0.916403] sdhci: Secure Digital Host Controller Interface driver
[ 0.916405] sdhci: Copyright(c) Pierre Ossman
[ 0.917932] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.927116] libata version 3.00 loaded.
[ 0.933843] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.933849] ACPI: Thermal Zone [GFXZ] (0 C)
[ 0.943717] thermal LNXTHERM:03: registered as thermal_zone2
[ 0.943722] ACPI: Thermal Zone [EXTZ] (28 C)
[ 0.953656] thermal LNXTHERM:04: registered as thermal_zone3
[ 0.953661] ACPI: Thermal Zone [LOCZ] (37 C)
[ 0.965686] thermal LNXTHERM:05: registered as thermal_zone4
[ 0.965692] ACPI: Thermal Zone [BATZ] (28 C)
[ 0.966242] thermal LNXTHERM:06: registered as thermal_zone5
[ 0.966247] ACPI: Thermal Zone [PCHZ] (127 C)
[ 0.966576] thermal LNXTHERM:07: registered as thermal_zone6
[ 0.966581] ACPI: Thermal Zone [DM1Z] (0 C)
[ 0.966909] thermal LNXTHERM:08: registered as thermal_zone7
[ 0.966915] ACPI: Thermal Zone [DM2Z] (0 C)
[ 0.994892] firewire_ohci: Added fw-ohci device 0000:23:00.0, OHCI version 1.10
[ 0.994937] sdhci-pci 0000:23:00.2: SDHCI controller found [197b:2391] (rev 30)
[ 0.994973] sdhci-pci 0000:23:00.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.995012] sdhci-pci 0000:23:00.2: setting latency timer to 64
[ 0.995041] Registered led device: mmc0::
[ 0.995068] mmc0: SDHCI controller on PCI [0000:23:00.2] using DMA
[ 1.175459] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 10:60:4b:4b:84:ae
[ 1.175462] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.175499] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 1.175517] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.175539] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.175543] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.175559] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.175587] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.179482] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 1.179495] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd4739000
[ 1.194682] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.194722] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.194724] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.194725] usb usb1: Product: EHCI Host Controller
[ 1.194727] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.194728] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.194781] usb usb1: configuration #1 chosen from 1 choice
[ 1.194801] hub 1-0:1.0: USB hub found
[ 1.194805] hub 1-0:1.0: 2 ports detected
[ 1.194839] ahci 0000:00:1f.2: version 3.0
[ 1.194850] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.194880] alloc irq_desc for 29 on node -1
[ 1.194881] alloc kstat_irqs on node -1
[ 1.194890] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 1.194914] ahci: SSS flag set, parallel bus scan disabled
[ 1.211549] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
[ 1.211552] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 1.211557] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.243525] scsi0 : ahci
[ 1.243604] scsi1 : ahci
[ 1.243653] scsi2 : ahci
[ 1.243702] scsi3 : ahci
[ 1.243754] scsi4 : ahci
[ 1.243803] scsi5 : ahci
[ 1.244078] ata1: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737100 irq 29
[ 1.244081] ata2: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737180 irq 29
[ 1.244082] ata3: DUMMY
[ 1.244085] ata4: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737280 irq 29
[ 1.244088] ata5: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737300 irq 29
[ 1.244092] ata6: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737380 irq 29
[ 1.244111] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 1.244114] xhci_hcd 0000:00:14.0: PCI INT A: no GSI - using IRQ 10
[ 1.244136] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.244140] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.244152] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.244237] xhci_hcd 0000:00:14.0: cache line size of 32 is not supported
[ 1.244251] xhci_hcd 0000:00:14.0: irq 10, io mem 0xd4720000
[ 1.244276] usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[ 1.244282] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.244284] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.244286] usb usb2: Product: xHCI Host Controller
[ 1.244287] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
[ 1.244288] usb usb2: SerialNumber: 0000:00:14.0
[ 1.244336] usb usb2: configuration #1 chosen from 1 choice
[ 1.244339] xHCI xhci_add_endpoint called for root hub
[ 1.244341] xHCI xhci_check_bandwidth called for root hub
[ 1.244371] hub 2-0:1.0: USB hub found
[ 1.244376] hub 2-0:1.0: 8 ports detected
[ 1.244443] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.244458] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.244462] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.244469] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.244493] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.248361] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 1.248365] ehci_hcd 0000:00:1d.0: irq 16, io mem 0xd4738000
[ 1.263441] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.263461] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.263465] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.263481] usb usb3: Product: EHCI Host Controller
[ 1.263482] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.263484] usb usb3: SerialNumber: 0000:00:1d.0
[ 1.263526] usb usb3: configuration #1 chosen from 1 choice
[ 1.263544] hub 3-0:1.0: USB hub found
[ 1.263548] hub 3-0:1.0: 2 ports detected
[ 1.495201] firewire_core: created device fw0: GUID ffe473fffffffffe, S400
[ 1.507622] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.563061] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.573327] ata1.00: ACPI _SDD failed (AE 0x5)
[ 1.639578] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.639582] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.639644] usb 1-1: configuration #1 chosen from 1 choice
[ 1.639757] hub 1-1:1.0: USB hub found
[ 1.639826] hub 1-1:1.0: 6 ports detected
[ 1.750808] usb 3-1: new high speed USB device using ehci_hcd and address 2
[ 1.883259] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.883263] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.883324] usb 3-1: configuration #1 chosen from 1 choice
[ 1.883441] hub 3-1:1.0: USB hub found
[ 1.883506] hub 3-1:1.0: 6 ports detected
[ 1.954921] usb 1-1.1: new full speed USB device using ehci_hcd and address 3
[ 2.047798] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003d
[ 2.047802] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 2.047806] usb 1-1.1: SerialNumber: 0020c49eec8d
[ 2.047864] usb 1-1.1: configuration #1 chosen from 1 choice
[ 2.118464] usb 1-1.2: new high speed USB device using ehci_hcd and address 4
[ 2.211086] usb 1-1.2: New USB device found, idVendor=8564, idProduct=1000
[ 2.211090] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.211093] usb 1-1.2: Product: Mass Storage Device
[ 2.211096] usb 1-1.2: Manufacturer: JetFlash
[ 2.211099] usb 1-1.2: SerialNumber: 3567985132
[ 2.211155] usb 1-1.2: configuration #1 chosen from 1 choice
[ 2.282501] usb 1-1.3: new high speed USB device using ehci_hcd and address 5
[ 2.516313] usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=2c03
[ 2.516317] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.516320] usb 1-1.3: Product: HP HD Webcam [Fixed]
[ 2.516323] usb 1-1.3: Manufacturer: DCQGV019I2U0BX
[ 2.516378] usb 1-1.3: configuration #1 chosen from 1 choice
[ 2.761627] usb 3-1.6: new full speed USB device using ehci_hcd and address 3
[ 2.856870] usb 3-1.6: New USB device found, idVendor=0a5c, idProduct=21e1
[ 2.856874] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.856878] usb 3-1.6: Product: BCM20702A0
[ 2.856880] usb 3-1.6: Manufacturer: Broadcom Corp
[ 2.856883] usb 3-1.6: SerialNumber: E006E6B42EA8
[ 2.856937] usb 3-1.6: configuration #1 chosen from 1 choice
[ 6.876098] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.886287] ata1.00: ACPI _SDD failed (AE 0x5)
[ 6.886302] ata1.00: ACPI: failed the second time, disabled
[ 6.886569] ata1.00: ATA-8: ST9500423AS, 0004HPM1, max UDMA/133
[ 6.886573] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 6.887690] ata1.00: configured for UDMA/133
[ 6.900163] scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0004 PQ: 0 ANSI: 5
[ 7.623117] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.628649] ata2.00: ACPI _SDD failed (AE 0x5)
[ 12.944396] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 12.947468] ata2.00: ACPI _SDD failed (AE 0x5)
[ 12.947471] ata2.00: ACPI: failed the second time, disabled
[ 12.947487] ata2.00: ATAPI: hp DVD A DS8A8SH, KH63, max UDMA/100
[ 12.948526] ata2.00: configured for UDMA/100
[ 12.976305] scsi 1:0:0:0: CD-ROM hp DVD A DS8A8SH KH63 PQ: 0 ANSI: 5
[ 13.295684] ata4: SATA link down (SStatus 0 SControl 300)
[ 13.631243] ata5: SATA link down (SStatus 0 SControl 300)
[ 13.966804] ata6: SATA link down (SStatus 0 SControl 300)
[ 13.988952] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 13.988956] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 13.989010] sd 0:0:0:0: [sda] Write Protect is off
[ 13.989013] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 13.989035] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 13.989178] sda:
[ 13.993300] Initializing USB Mass Storage driver...
[ 13.993378] scsi6 : SCSI emulation for USB Mass Storage devices
[ 13.993438] usb-storage: device found at 4
[ 13.993440] usb-storage: waiting for device to settle before scanning
[ 13.993462] usbcore: registered new interface driver usb-storage
[ 13.993464] USB Mass Storage support registered.
[ 14.001328] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 14.001333] Uniform CD-ROM driver Revision: 3.20
[ 14.001421] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 14.035725] sda1 sda2 sda3 sda4
[ 14.056929] sda3: <bsd:bad subpartition - ignored
[ 14.056932] >
[ 14.057192] sd 0:0:0:0: [sda] Attached SCSI disk
[ 14.059862] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.059897] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 14.528226] EXT4-fs (sda4): mounted filesystem with ordered data mode
[ 15.890102] udev[516]: starting version 164
[ 16.134558] ACPI: SSDT 00000000b9cf0018 00861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
[ 16.135164] Monitor-Mwait will be used to enter C-1 state
[ 16.135184] Monitor-Mwait will be used to enter C-2 state
[ 16.135262] processor LNXCPU:00: registered as cooling_device0
[ 16.135818] ACPI: SSDT 00000000b9cf1a98 00303 (v01 PmRef ApIst 00003000 INTL 20110112)
[ 16.136269] ACPI: SSDT 00000000b9cefd98 00119 (v01 PmRef ApCst 00003000 INTL 20110112)
[ 16.136868] processor LNXCPU:01: registered as cooling_device1
[ 16.137762] processor LNXCPU:02: registered as cooling_device2
[ 16.138506] processor LNXCPU:03: registered as cooling_device3
[ 16.139447] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 16.139453] ACPI: Sleep Button [SLPB]
[ 16.139498] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 16.139574] ACPI: Lid Switch [LID]
[ 16.139624] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 16.139628] ACPI: Power Button [PWRF]
[ 16.450994] ACPI: WMI: Mapper loaded
[ 16.452251] ACPI: AC Adapter [AC] (on-line)
[ 16.455221] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 16.503754] ACPI: Battery Slot [BAT0] (battery present)
[ 16.503941] ACPI: Battery Slot [BAT1] (battery absent)
[ 16.769767] tpm_inf_pnp 00:04: Found GTPM with ID IFX0102
[ 16.769814] tpm_inf_pnp 00:04: TPM found: config base 0xfe00, data base 0xfe80, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[ 16.922544] Linux video capture interface: v2.00
[ 16.934441] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (1bcf:2c03)
[ 16.951787] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input6
[ 16.951834] usbcore: registered new interface driver uvcvideo
[ 16.951836] USB Video Class driver (v0.1.0)
[ 17.513513] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1c0b1, caps: 0xd00033/0x640000/0xa0400
[ 17.556509] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 18.367842] loop: module loaded
[ 18.719167] fuse init (API version 7.13)
[ 18.984560] usb-storage: device scan complete
[ 18.985053] scsi 6:0:0:0: Direct-Access JetFlash Transcend 16GB 1.00 PQ: 0 ANSI: 5
[ 18.985473] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 18.986640] sd 6:0:0:0: [sdb] 30871552 512-byte logical blocks: (15.8 GB/14.7 GiB)
[ 18.987022] sd 6:0:0:0: [sdb] Write Protect is off
[ 18.987027] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 18.987043] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 18.989145] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 18.989211] sdb: sdb1
[ 18.991017] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 18.991080] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 22.210489] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
[ 23.126953] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 23.182797] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 23.183140] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.429238] Bluetooth: Core ver 2.15
[ 24.429308] NET: Registered protocol family 31
[ 24.429310] Bluetooth: HCI device and connection manager initialized
[ 24.429312] Bluetooth: HCI socket layer initialized
[ 24.472814] Bluetooth: L2CAP ver 2.14
[ 24.472816] Bluetooth: L2CAP socket layer initialized
[ 24.511782] Bluetooth: RFCOMM TTY layer initialized
[ 24.511786] Bluetooth: RFCOMM socket layer initialized
[ 24.511788] Bluetooth: RFCOMM ver 1.11
[ 24.618983] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.618986] Bluetooth: BNEP filters: protocol multicast
[ 24.712453] Bridge firewalling registered
[ 24.876430] lp: driver loaded but no devices found
[ 24.892487] ppdev: user-space parallel port driver
[ 25.114374] Bluetooth: SCO (Voice Link) ver 0.6
[ 25.114377] Bluetooth: SCO socket layer initialized
[ 52.480910] CPU0 attaching NULL sched-domain.
[ 52.480918] CPU1 attaching NULL sched-domain.
[ 52.480921] CPU2 attaching NULL sched-domain.
[ 52.480923] CPU3 attaching NULL sched-domain.
[ 52.544625] CPU0 attaching sched-domain:
[ 52.544631] domain 0: span 0-1 level SIBLING
[ 52.544635] groups: group ffff88000520fae0 cpus 0 (cpu_power = 589) group ffff88000524fae0 cpus 1 (cpu_power = 589)
[ 52.544646] domain 1: span 0-3 level MC
[ 52.544649] groups: group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178)
[ 52.544660] CPU1 attaching sched-domain:
[ 52.544663] domain 0: span 0-1 level SIBLING
[ 52.544666] groups: group ffff88000524fae0 cpus 1 (cpu_power = 589) group ffff88000520fae0 cpus 0 (cpu_power = 589)
[ 52.544674] domain 1: span 0-3 level MC
[ 52.544677] groups: group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178)
[ 52.544686] CPU2 attaching sched-domain:
[ 52.544689] domain 0: span 2-3 level SIBLING
[ 52.544692] groups: group ffff88000528fae0 cpus 2 (cpu_power = 589) group ffff8800052cfae0 cpus 3 (cpu_power = 589)
[ 52.544700] domain 1: span 0-3 level MC
[ 52.544702] groups: group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178)
[ 52.544712] CPU3 attaching sched-domain:
[ 52.544714] domain 0: span 2-3 level SIBLING
[ 52.544717] groups: group ffff8800052cfae0 cpus 3 (cpu_power = 589) group ffff88000528fae0 cpus 2 (cpu_power = 589)
[ 52.544725] domain 1: span 0-3 level MC
[ 52.544728] groups: group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178)
[ 52.545276] CPU0 attaching NULL sched-domain.
[ 52.545279] CPU1 attaching NULL sched-domain.
[ 52.545282] CPU2 attaching NULL sched-domain.
[ 52.545285] CPU3 attaching NULL sched-domain.
[ 52.608531] CPU0 attaching sched-domain:
[ 52.608537] domain 0: span 0-1 level SIBLING
[ 52.608540] groups: group ffff88000520fae0 cpus 0 (cpu_power = 589) group ffff88000524fae0 cpus 1 (cpu_power = 589)
[ 52.608551] domain 1: span 0-3 level MC
[ 52.608554] groups: group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178)
[ 52.608566] CPU1 attaching sched-domain:
[ 52.608568] domain 0: span 0-1 level SIBLING
[ 52.608571] groups: group ffff88000524fae0 cpus 1 (cpu_power = 589) group ffff88000520fae0 cpus 0 (cpu_power = 589)
[ 52.608579] domain 1: span 0-3 level MC
[ 52.608582] groups: group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178)
[ 52.608591] CPU2 attaching sched-domain:
[ 52.608594] domain 0: span 2-3 level SIBLING
[ 52.608597] groups: group ffff88000528fae0 cpus 2 (cpu_power = 589) group ffff8800052cfae0 cpus 3 (cpu_power = 589)
[ 52.608605] domain 1: span 0-3 level MC
[ 52.608608] groups: group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178)
[ 52.608617] CPU3 attaching sched-domain:
[ 52.608619] domain 0: span 2-3 level SIBLING
[ 52.608622] groups: group ffff8800052cfae0 cpus 3 (cpu_power = 589) group ffff88000528fae0 cpus 2 (cpu_power = 589)
[ 52.608630] domain 1: span 0-3 level MC
[ 52.608633] groups: group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178)
[ 71.541997] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 71.601186] CPU0 attaching NULL sched-domain.
[ 71.601193] CPU1 attaching NULL sched-domain.
[ 71.601196] CPU2 attaching NULL sched-domain.
[ 71.601199] CPU3 attaching NULL sched-domain.
[ 71.635622] CPU0 attaching sched-domain:
[ 71.635628] domain 0: span 0-1 level SIBLING
[ 71.635632] groups: group ffff88000520fae0 cpus 0 (cpu_power = 589) group ffff88000524fae0 cpus 1 (cpu_power = 589)
[ 71.635643] domain 1: span 0-3 level MC
[ 71.635646] groups: group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178)
[ 71.635657] CPU1 attaching sched-domain:
[ 71.635660] domain 0: span 0-1 level SIBLING
[ 71.635662] groups: group ffff88000524fae0 cpus 1 (cpu_power = 589) group ffff88000520fae0 cpus 0 (cpu_power = 589)
[ 71.635671] domain 1: span 0-3 level MC
[ 71.635674] groups: group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178)
[ 71.635683] CPU2 attaching sched-domain:
[ 71.635685] domain 0: span 2-3 level SIBLING
[ 71.635688] groups: group ffff88000528fae0 cpus 2 (cpu_power = 589) group ffff8800052cfae0 cpus 3 (cpu_power = 589)
[ 71.635696] domain 1: span 0-3 level MC
[ 71.635699] groups: group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178)
[ 71.635708] CPU3 attaching sched-domain:
[ 71.635711] domain 0: span 2-3 level SIBLING
[ 71.635714] groups: group ffff8800052cfae0 cpus 3 (cpu_power = 589) group ffff88000528fae0 cpus 2 (cpu_power = 589)
[ 71.635722] domain 1: span 0-3 level MC
[ 71.635724] groups: group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178)
[ 71.636266] CPU0 attaching NULL sched-domain.
[ 71.636270] CPU1 attaching NULL sched-domain.
[ 71.636273] CPU2 attaching NULL sched-domain.
[ 71.636276] CPU3 attaching NULL sched-domain.
[ 71.691541] CPU0 attaching sched-domain:
[ 71.691547] domain 0: span 0-1 level SIBLING
[ 71.691550] groups: group ffff88000520fae0 cpus 0 (cpu_power = 589) group ffff88000524fae0 cpus 1 (cpu_power = 589)
[ 71.691561] domain 1: span 0-3 level MC
[ 71.691564] groups: group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178)
[ 71.691575] CPU1 attaching sched-domain:
[ 71.691578] domain 0: span 0-1 level SIBLING
[ 71.691581] groups: group ffff88000524fae0 cpus 1 (cpu_power = 589) group ffff88000520fae0 cpus 0 (cpu_power = 589)
[ 71.691589] domain 1: span 0-3 level MC
[ 71.691592] groups: group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178) group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178)
[ 71.691601] CPU2 attaching sched-domain:
[ 71.691604] domain 0: span 2-3 level SIBLING
[ 71.691607] groups: group ffff88000528fae0 cpus 2 (cpu_power = 589) group ffff8800052cfae0 cpus 3 (cpu_power = 589)
[ 71.691615] domain 1: span 0-3 level MC
[ 71.691617] groups: group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178)
[ 71.691627] CPU3 attaching sched-domain:
[ 71.691629] domain 0: span 2-3 level SIBLING
[ 71.691632] groups: group ffff8800052cfae0 cpus 3 (cpu_power = 589) group ffff88000528fae0 cpus 2 (cpu_power = 589)
[ 71.691640] domain 1: span 0-3 level MC
[ 71.691643] groups: group ffff88000528fbf0 cpus 2-3 (cpu_power = 1178) group ffff88000520fbf0 cpus 0-1 (cpu_power = 1178)
Код: Выделить всё
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:0154] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:17ab]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:17ab]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d4000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
00:14.0 USB Controller [0c03]: Intel Corporation Device [8086:1e31] (rev 04) (prog-if 30)
Subsystem: Hewlett-Packard Company Device [103c:17ab]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d4720000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation Device [8086:1e3a] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:17ab]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d4734000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:17ab]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at d4700000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d473a000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 4060 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 41a9
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation Device [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:17ab]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4739000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation Device [8086:1e20] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:17ab]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d4730000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d4600000-d46fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4171
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:17ab]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation Device [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=22, sec-latency=0
I/O behind bridge: 00002000-00003fff
Memory behind bridge: d0000000-d3ffffff
Prefetchable memory behind bridge: 00000000bf200000-00000000bf3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4179
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:17ab]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation Device [8086:1e14] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=23, subordinate=23, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d4500000-d45fffff
Prefetchable memory behind bridge: 00000000bf400000-00000000bf4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #2, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4181
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:17ab]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation Device [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=24, subordinate=24, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d4400000-d44fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #3, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4189
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:17ab]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation Device [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:17ab]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4738000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:1e59] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:17ab]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.2 SATA controller [0106]: Intel Corporation Device [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:17ab]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 29
Region 0: I/O ports at 4088 [size=8]
Region 1: I/O ports at 4094 [size=4]
Region 2: I/O ports at 4080 [size=8]
Region 3: I/O ports at 4090 [size=4]
Region 4: I/O ports at 4040 [size=32]
Region 5: Memory at d4737000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4199
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
23:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380] (rev 30) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:17ab]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d4500000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d4505000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: fffffffc Data: 0000
Kernel driver in use: firewire_ohci
23:00.1 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30)
Subsystem: Hewlett-Packard Company Device [103c:17ab]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d4504000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at bf400000 [disabled] [size=32K]
Capabilities: [a4] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: fffffffc Data: 0000
23:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 30) (prog-if 01)
Subsystem: Hewlett-Packard Company Device [103c:17ab]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d4503000 (32-bit, non-prefetchable) [size=256]
Capabilities: [a4] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: fffffffc Data: 0000
Kernel driver in use: sdhci-pci
24:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4359]
Subsystem: Hewlett-Packard Company Device [103c:182c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d4400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <4us, L1 <64us
ClockPM+ Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-00-23-ff-ff-bb-68-94
Capabilities: [16c v1] Power Budgeting <?>