10G Supermicro сетевая и FreeBSD 10.3

Проблемы установки, настройки и работы Правильной Операционной Системы

Модератор: terminus

Правила форума
Убедительная просьба юзать теги [cоde] при оформлении листингов.
Сообщения не оформленные должным образом имеют все шансы быть незамеченными.
AleZ
рядовой
Сообщения: 44
Зарегистрирован: 2017-03-23 17:24:07

10G Supermicro сетевая и FreeBSD 10.3

Непрочитанное сообщение AleZ » 2017-09-21 12:11:59

FreeBSD 10.3-RELEASE
Сетевая AOC-STGN-I2C, на чипе Intel 82599, поставил драйвера ix-3.2.15, подключил в loader.conf.
dmesg

Код: Выделить всё

pci1: <network, ethernet> at device 0.0 (no driver attached)
pci1: <network, ethernet> at device 0.1 (no driver attached)
pciconf

Код: Выделить всё

none4@pci0:1:0:0:       class=0x020000 card=0x10fb1b52 chip=0x00018086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = network
    subclass   = ethernet
    bar   [10] = type Prefetchable Memory, range 64, base 0xdfd80000, size 524288, enabled
    bar   [18] = type I/O Port, range 32, base 0xe020, size 32, enabled
    bar   [20] = type Prefetchable Memory, range 64, base 0xdfe04000, size 16384, enabled
none5@pci0:1:0:1:       class=0x020000 card=0x10fb1b52 chip=0x00018086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = network
    subclass   = ethernet
    bar   [10] = type Prefetchable Memory, range 64, base 0xdfd00000, size 524288, enabled
    bar   [18] = type I/O Port, range 32, base 0xe000, size 32, enabled
    bar   [20] = type Prefetchable Memory, range 64, base 0xdfe00000, size 16384, enabled
Кто-то пользовался такими картами? Работают на FreeBSD?

Хостинговая компания Host-Food.ru
Хостинг HostFood.ru
 

Услуги хостинговой компании Host-Food.ru

Хостинг HostFood.ru

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

guest
проходил мимо

10G Supermicro сетевая и FreeBSD 10.3

Непрочитанное сообщение guest » 2017-09-21 19:36:49

AleZ писал(а):FreeBSD 10.3-RELEASE
Сетевая AOC-STGN-I2C, на чипе Intel 82599, поставил драйвера ix-3.2.15, подключил в loader.conf.
dmesg

Код: Выделить всё

pci1: <network, ethernet> at device 0.0 (no driver attached)
pci1: <network, ethernet> at device 0.1 (no driver attached)
pciconf

Код: Выделить всё

none4@pci0:1:0:0:       class=0x020000 card=0x10fb1b52 chip=0x00018086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = network
    subclass   = ethernet
    bar   [10] = type Prefetchable Memory, range 64, base 0xdfd80000, size 524288, enabled
    bar   [18] = type I/O Port, range 32, base 0xe020, size 32, enabled
    bar   [20] = type Prefetchable Memory, range 64, base 0xdfe04000, size 16384, enabled
none5@pci0:1:0:1:       class=0x020000 card=0x10fb1b52 chip=0x00018086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = network
    subclass   = ethernet
    bar   [10] = type Prefetchable Memory, range 64, base 0xdfd00000, size 524288, enabled
    bar   [18] = type I/O Port, range 32, base 0xe000, size 32, enabled
    bar   [20] = type Prefetchable Memory, range 64, base 0xdfe00000, size 16384, enabled
Кто-то пользовался такими картами? Работают на FreeBSD?
попадос - это Coraid:
chip=0x00018086

можно попробовать продать через Ebay..?
прошить в нее firmware от Intel не получится, только писать в coraid, которые попросят
денег и еще чего-нибудь.

imho, на свалку, тому кто надул или заказывал - дюлей.

AleZ
рядовой
Сообщения: 44
Зарегистрирован: 2017-03-23 17:24:07

10G Supermicro сетевая и FreeBSD 10.3

Непрочитанное сообщение AleZ » 2017-09-25 13:48:58

да, уже понял что попадос, такие дела (

Demis
прапорщик
Сообщения: 496
Зарегистрирован: 2015-05-25 14:36:32

10G Supermicro сетевая и FreeBSD 10.3

Непрочитанное сообщение Demis » 2017-10-10 11:39:36

AleZ писал(а):да, уже понял что попадос, такие дела (
Сам не сталкивался, но вообще интересно конечно, чисто из познавательных соображений. Вроде как на https://www.persy.com/public_html/fck_i ... GN-i2S.pdf написано:

Код: Выделить всё

OS Support:
- Windows® Vista SP2, 2003 SP2, 2008 SP2 
- RedHat EL, SuSe SLES 
- FreeBSD
И на https://www.manualslib.com/manual/11737 ... =24#manual тоже расписано:

Код: Выделить всё

Installing Drivers on FreeBSD
Follow the instructions below to install the drivers in FreeBSD kernel 4.8 or later.
In the instructions below, x.x.x is the driver version as indicated in the name of the
drive tar file.
Note: You must have kernel sources installed in order to compile the
driver module.
1. Move the base driver tar file to the dirctory of your choice. For example, use
/home/username/ixgb or /usr/local/src/ixgb.
2. Untar/unzip the archive:
tar xfz ixgb-x.x.x directory
3. To install man page:
cd ixgb-x.x.x
gzip -c ixgb.4 > /usr/share/man/man4/ixgb.4.gz
4. To load the driver onto a running system, perform the following steps:
cd ixgb-x.x.x
make
or
cd ixgb-x.x.x/src
make load
5. To assign an IP address to the interface, enter the following:

guest
проходил мимо

10G Supermicro сетевая и FreeBSD 10.3

Непрочитанное сообщение guest » 2017-10-10 12:23:31

Demis писал(а):
AleZ писал(а):да, уже понял что попадос, такие дела (
Сам не сталкивался, но вообще интересно конечно, чисто из познавательных соображений. Вроде как на https://www.persy.com/public_html/fck_i ... GN-i2S.pdf написано:

Код: Выделить всё

OS Support:
- Windows® Vista SP2, 2003 SP2, 2008 SP2 
- RedHat EL, SuSe SLES 
- FreeBSD
И на https://www.manualslib.com/manual/11737 ... =24#manual тоже расписано:

Код: Выделить всё

Installing Drivers on FreeBSD
Follow the instructions below to install the drivers in FreeBSD kernel 4.8 or later.
In the instructions below, x.x.x is the driver version as indicated in the name of the
drive tar file.
Note: You must have kernel sources installed in order to compile the
driver module.
1. Move the base driver tar file to the dirctory of your choice. For example, use
/home/username/ixgb or /usr/local/src/ixgb.
2. Untar/unzip the archive:
tar xfz ixgb-x.x.x directory
3. To install man page:
cd ixgb-x.x.x
gzip -c ixgb.4 > /usr/share/man/man4/ixgb.4.gz
4. To load the driver onto a running system, perform the following steps:
cd ixgb-x.x.x
make
or
cd ixgb-x.x.x/src
make load
5. To assign an IP address to the interface, enter the following:
нижнее снимет все вопросы и расширит познания:

https://ru.wikipedia.org/wiki/ATA_over_Ethernet