ichsmb & ich9

[weec]

пробую снять данные с датчиков на мат.плате с ich9
система видит smbus controller и использует ichsmb
команда 'smbmsg -p' выводит наличие каналов (rw, r) без каких либо ошибок

но программы вроде chm, healthd, mbmon не видят smbus

7.1-RELEASE
куда копать?
быть может есть другие варианты получения данных с датчиков?

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[paradox]

на бсдпортале такая тема поднималась
помоему там все решили

[Overseer]

и как успехи?

7.2-RELEASE, на матери ICH8, не могу получить данные температуры =(
(мать: http://www.technograd.com/atic/1488)

есть вот что:

Код: Выделить всё

~ ~> sysctl -a | grep temper
dev.cpu.0.temperature: 59
dev.cpu.1.temperature: 59
dev.cpu.2.temperature: 56
dev.cpu.3.temperature: 58

Код: Выделить всё

~ ~> pciconf -lv
...
ichsmb0@pci0:0:31:3:    class=0x0c0500 card=0x4f438086 chip=0x283e8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) SMBus Controller'
    class      = serial bus
    subclass   = SMBus
...

Код: Выделить всё

 ~ ~> smbmsg -p
Probing for devices on /dev/smb0:
Device @0x44: rw
Device @0x50: rw
Device @0x52: rw
Device @0x64: w
Device @0x80: rw
Device @0x88: w
Device @0xc4: rw
Device @0xd0: rw
Device @0xd2: rw
Device @0xe4: w

Код: Выделить всё

mbmon -D -A
Probe Request: none
>>> Testing Reg's at ISA-IO <<<
[ISA Port IO-Base:0x290]
Probing Winbond/Asus/LM78/79 chip:
  CR40:0xFF,  CR41:0xFF,  CR42:0xFF,  CR43:0xFF
  CR44:0xFF,  CR45:0xFF,  CR46:0xFF,  CR47:0xFF
  CR48:0xFF,  CR49:0xFF,  CR4A:0xFF,  CR4B:0xFF
  CR4C:0xFF,  CR4D:0xFF,  CR4E:0xFF,  CR4F:0xFF
  CR56:0xFF,  CR58:0xFF,  CR59:0xFF,  CR5D:0xFF
  CR3E:0xFF,  CR13:0xFF,  CR17:0xFF,  CRA1:0xFF
  CR20:0xFF,  CR22:0xFF,  CR23:0xFF,  CR24:0xFF
  CR27:0xFF,  CR29:0xFF,  CR2A:0xFF,  CR2B:0xFF
Summary of Detection:
 * No monitors found.
InitMBInfo: Unknown error: 0
This program needs "setuid root"!!

Код: Выделить всё

~ ~> ls -la `which mbmon`
-r-sr-xr-x  1 root  wheel  42768 Aug 26 09:09 /usr/local/bin/mbmon

Код: Выделить всё

~ ~> mbmon -S
No SMBus HWM available!!
InitMBInfo: Unknown error: 0

Код: Выделить всё

~ ~> lmmon -i /dev/smb0
 Motherboard Temp               Voltages

 255C / 491F / 528K        Vcore1:   +3.984V
                           Vcore2:   +3.984V
    Fan Speeds             + 3.3V:   +3.984V
                           + 5.0V:   +6.654V
    1:    0 rpm            +12.0V:  +15.938V
    2:    0 rpm            -12.0V:  -15.938V
    3:    0 rpm            - 5.0V:   -6.654V

~ ~> cat /var/run/dmesg.boot
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #1: Wed Aug 26 00:42:49 EEST 2009
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (2397.62-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
real memory = 2120462336 (2022 MB)
avail memory = 2069159936 (1973 MB)
ACPI APIC Table: <INTEL DQ965GF >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <INTEL DQ965GF> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x2098-0x209f mem 0x90100000-0x901fffff,0x80000000-0x8fffffff irq 16 at device 2.0 on pci0
agp0: <Intel Q965 SVGA controller> on vgapci0
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
pci0: <simple comms> at device 3.0 (no driver attached)
atapci0: <Intel ATA controller> port 0x2090-0x2097,0x20ac-0x20af,0x2088-0x208f,0x20a8-0x20ab,0x2060-0x206f irq 18 at device 3.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <simple comms, UART> at device 3.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x2040-0x205f mem 0x90200000-0x9021ffff,0x90220000-0x90220fff irq 20 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:19:d1:9f:dd:ef
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci1: <Marvell 88SX6101 UDMA133 controller> port 0x1018-0x101f,0x1024-0x1027,0x1010-0x1017,0x1020-0x1023,0x1000-0x100f mem 0x90000000-0x900001ff irq 17 at device 0.0 on pci2
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <Intel AHCI controller> port 0x2078-0x207f,0x20a4-0x20a7,0x2070-0x2077,0x20a0-0x20a3,0x2020-0x203f mem 0x90222000-0x902227ff irq 19 at device 31.2 on pci0
atapci2: [ITHREAD]
atapci2: AHCI Version 01.10 controller with 6 ports detected
ata5: <ATA channel 0> on atapci2
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci2
ata6: [ITHREAD]
ata7: <ATA channel 2> on atapci2
ata7: [ITHREAD]
ata8: <ATA channel 3> on atapci2
ata8: [ITHREAD]
ata9: <ATA channel 4> on atapci2
ata9: [ITHREAD]
ata10: <ATA channel 5> on atapci2
ata10: [ITHREAD]
ichsmb0: <SMBus controller> port 0x2000-0x201f mem 0x90222800-0x902228ff irq 21 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_perf1: <ACPI CPU Frequency Control> on cpu1
acpi_perf1: failed in PERF_STATUS attach
device_attach: acpi_perf1 attach returned 6
acpi_perf1: <ACPI CPU Frequency Control> on cpu1
acpi_perf1: failed in PERF_STATUS attach
device_attach: acpi_perf1 attach returned 6
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
cpu2: <ACPI CPU> on acpi0
acpi_perf2: <ACPI CPU Frequency Control> on cpu2
acpi_perf2: failed in PERF_STATUS attach
device_attach: acpi_perf2 attach returned 6
acpi_perf2: <ACPI CPU Frequency Control> on cpu2
acpi_perf2: failed in PERF_STATUS attach
device_attach: acpi_perf2 attach returned 6
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
cpu3: <ACPI CPU> on acpi0
acpi_perf3: <ACPI CPU Frequency Control> on cpu3
acpi_perf3: failed in PERF_STATUS attach
device_attach: acpi_perf3 attach returned 6
acpi_perf3: <ACPI CPU Frequency Control> on cpu3
acpi_perf3: failed in PERF_STATUS attach
device_attach: acpi_perf3 attach returned 6
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff pnpid ORM0000 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forwarding disabled, default to deny, logging limited to 3 packets/entry by default
ad18: 715404MB <WDC WD7500AAKS-00RBA0 30.04G30> at ata9-master SATA300
ad20: 715404MB <WDC WD7500AAKS-00RBA0 30.04G30> at ata10-master SATA300
ar0: 715402MB <Intel MatrixRAID RAID1> status: READY
ar0: disk0 READY (master) using ad20 at ata10-master
ar0: disk1 READY (mirror) using ad18 at ata9-master
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
GEOM_MIRROR: Device mirror/gm0 launched (2/2).
GEOM_LABEL: Label for provider ar0s1a is ufsid/47a4b125f98bd0c7.
GEOM_LABEL: Label for provider ar0s1d is ufsid/47a4b13de75e64d7.
GEOM_LABEL: Label for provider ar0s1e is ufsid/47a4b13d41acdc55.
GEOM_LABEL: Label for provider ar0s1f is ufsid/47a4b13def47af48.
GEOM_LABEL: Label for provider ar0s1g is ufsid/47a4b13c5bcef6d2.
GEOM_LABEL: Label for provider ar0s1h is ufsid/47a4b125d1c06e09.
Trying to mount root from ufs:/dev/mirror/gm0s1a

ни healthd ни mbmon ни chm не дают результатов.. куда копать?

[Гость]

попробуй sysutils/bsdhwmon

[Overseer]

попробуй sysutils/bsdhwmon

спасибо, но..

The bsdhwmon project has been cancelled, and is no longer maintained. All bug reports, feature requests, and related items will be ignored.

Код: Выделить всё

~> bsdhwmon
ERROR: Your motherboard does not appear to be supported.
You can visit http://bsdhwmon.parodius.com/ to see if support
for your motherboard/system is under development.

там список поддерживаемых чипов весьма беден:

Код: Выделить всё

~> bsdhwmon -l
maker          product                Chip type           Slave addr.
-------------  ---------------------  ------------------  -----------
Supermicro     P8SC8                  Winbond W83792D     0x2f
Supermicro     P8SCT                  Winbond W83792D     0x2f
Supermicro     PDSMA+                 Winbond W83793G     0x2f
Supermicro     PDSMi+                 Winbond W83793G     0x2f
Supermicro     PDSMU                  Winbond W83793G     0x2f
Supermicro     X6DHR-8G2/X6DHR-TG     Winbond W83792D     0x2f
Supermicro     X6DVA                  X6DVA/X6DVL/X6DAL   Custom
Supermicro     X7DB8                  Winbond W83793G     0x2f
Supermicro     X7DBP                  Winbond W83793G     0x2f
Supermicro     X7DBT                  Winbond W83793G     0x2f
Supermicro     X7SB4/E                Winbond W83793G     0x2f
Supermicro     X7SBA                  Winbond W83793G     0x2f
Supermicro     X7SBi                  Winbond W83793G     0x2f