PfSense не видит TP-link TF-3239DL

winsys · Непрочитанное сообщение **winsys** » 2014-01-21 13:56:15

Поставил новую сетевую карточку в PfSense tp-Link TF-3239DL он её не видит, кто то сталкивался с подобным?
Версия PfSense 2.1-RELEASE (i386)
FreeBSD 8.3-RELEASE-p11

Хостинг HostFood.ru · **Хостинг HostFood.ru**

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

Alex Keda

Код: Выделить всё

dmesg -a
pciconf -lvcb

winsys · Непрочитанное сообщение **winsys** » 2014-01-21 23:27:07

Код: Выделить всё

Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE-p11 #1: Wed Sep 11 18:47:57 EDT 2013
    root@snapshots-8_3-i386.builders.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc                                             /src/sys/pfSense_SMP.8 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz (2129.22-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Family = 6  Model = f  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C                                             MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 4294967296 (4096 MB)
avail memory = 3268972544 (3117 MB)
ACPI APIC Table: <GBT    GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 0.3> irqs 0-23 on motherboard
ioapic1 <Version 0.3> irqs 24-47 on motherboard
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /bo                                             ot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc07bb6f0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /b                                             oot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07bb790, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw                                             /.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in                                              /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07bb830, 0) error 1
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <GBT GBTUACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, c7ef0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 3364 (P4M900) host to PCI bridge> on hostb0
agp0: aperture size is 128M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xd8000000-0xdbffffff,0xdd000000-0xddfffff                                             f irq 16 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 27 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 31 at device 3.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
atapci0: <VIA 8237A SATA150 controller> port 0xfc00-0xfc07,0xf800-0xf803,0xf400-                                             0xf407,0xf000-0xf003,0xec00-0xec0f,0xe800-0xe8ff irq 21 at device 15.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel> at channel 0 on atapci0
ata2: [ITHREAD]
ata3: <ATA channel> at channel 1 on atapci0
ata3: [ITHREAD]
atapci1: <VIA 8237A UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376                                             ,0xe400-0xe40f at device 15.1 on pci0
ata0: <ATA channel> at channel 0 on atapci1
ata0: [ITHREAD]
ata1: <ATA channel> at channel 1 on atapci1
ata1: [ITHREAD]
uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 20 at device 16.0 on p                                             ci0
uhci0: [ITHREAD]
usbus0: <VIA 83C572 USB controller> on uhci0
uhci1: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 22 at device 16.1 on p                                             ci0
uhci1: [ITHREAD]
usbus1: <VIA 83C572 USB controller> on uhci1
uhci2: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device 16.2 on p                                             ci0
uhci2: [ITHREAD]
usbus2: <VIA 83C572 USB controller> on uhci2
uhci3: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 23 at device 16.3 on p                                             ci0
uhci3: [ITHREAD]
usbus3: <VIA 83C572 USB controller> on uhci3
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xdffff000-0xdffff0ff irq 21 at devic                                             e 16.4 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <VIA VT6202 USB 2.0 controller> on ehci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd000-0xd0ff mem 0xdfffe000-0xdfff                                             e0ff irq 23 at device 18.0 on pci0
vr0: Quirks: 0x0
vr0: Revision: 0x7c
miibus0: <MII bus> on vr0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr0: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> at device 19.1 on pci0
pci4: <ACPI PCI bus> on pcib4
rl0: <RealTek 8139 10/100BaseTX> port 0x9c00-0x9cff mem 0xdfaff000-0xdfaff0ff ir                                             q 17 at device 4.0 on pci4
miibus1: <MII bus> on rl0
rlphy1: <RealTek internal media interface> PHY 0 on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: [ITHREAD]
pcib5: <ACPI Host-PCI bridge> on acpi0
pci128: <ACPI PCI bus> on pcib5
pci128: <multimedia, HDA> at device 1.0 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 823082306000823
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ad0: 58643MB <Maxtor 6Y060L0 YAR41BW0> at ata0-master UDMA133
ugen0.1: <VIA> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <VIA> at usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <VIA> at usbus2
uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <VIA> at usbus3
uhub3: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <VIA> at usbus4
uhub4: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
acd0: DVDR <HL-DT-ST DVDRAM GSA-H10N/JL10> at ata1-master UDMA33
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
ugen4.2: <GENERIC> at usbus4
umass0: <GENERIC USB Storage Device, class 0/0, rev 2.00/2.0a, addr 2> on usbus4
umass0:  SCSI over Bulk-Only; quirks = 0x0008
umass0:0:0:-1: Attached to scbus0
Trying to mount root from ufs:/dev/ad0s1a
Configuring crash dumps...
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <GENERIC USB Storage-SMC I19B> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
(probe0:umass-sim0:0:0:1): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:1): SCSI status: Check Condition
(probe0:umass-sim0:0:0:1): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da1 at umass-sim0 bus 0 scbus0 target 0 lun 1
da1: <GENERIC USB Storage-CFC I19B> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0
(probe0:umass-sim0:0:0:2): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:2): SCSI status: Check Condition
(probe0:umass-sim0:0:0:2): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da2 at umass-sim0 bus 0 scbus0 target 0 lun 2
da2: <GENERIC USB Storage-SDC I19B> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0
(probe0:umass-sim0:0:0:3): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:3): SCSI status: Check Condition
(probe0:umass-sim0:0:0:3): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da3 at umass-sim0 bus 0 scbus0 target 0 lun 3
da3: <GENERIC USB Storage-MSC I19B> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Using /dev/ad0s1b for dump device.
Mounting filesystems...
ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
            add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
             Consider tuning vm.kmem_size and vm.kmem_size_max
             in /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
Disabling APM on /dev/ad0

     ___
 ___/ f \\
/ p \\___/ Sense
\\___/   \\
    \\___/


Welcome to pfSense 2.1-RELEASE  ...

No core dumps found.
Creating symlinks...
.
.
.
done.
External config loader 1.0 is now starting...

Launching the init system...
 done.
Initializing...
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
 done.
Starting device manager (devd)...
done.
Loading configuration...
.
.
.
done.
Updating configuration...
done.
Cleaning backup cache...
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
done.
Setting up extended sysctls...
done.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 823082306000823
device_attach: est1 attach returned 6
Setting timezone...
done.
Configuring loopback interface...
done.
Starting syslog...
done.
Starting Secure Shell Services...
done.
Setting up polling defaults...
done.
Setting up interfaces microcode...
done.
Configuring loopback interface...
done.
Creating wireless clone interfaces...
done.
Configuring LAGG interfaces...
done.
Configuring VLAN interfaces...
done.
Configuring QinQ interfaces...
done.
Configuring WAN interface...
done.
Configuring LAN interface...
vr0: link state changed to DOWN
done.
Syncing OpenVPN settings...
done.
Configuring firewall
.
.
.
.
.
pflog0: promiscuous mode enabled
.
done.
Starting PFLOG...
done.
Setting up gateway monitors...
vr0: link state changed to UP
done.
Synchronizing user settings...
done.
Starting webConfigurator...
done.
Configuring CRON...
done.
Starting DNS forwarder...
done.
Starting NTP time client...
done.
Starting DHCP service...
done.
Starting DHCPv6 service...
done.
Configuring firewall
.
.
.
.
.
.
done.
Generating RRD graphs...
done.
Starting syslog...
done.
Starting CRON...
done.
Bootup complete
rl0: link state changed to DOWN
rl0: link state changed to UP
rl0: link state changed to DOWN
rl0: link state changed to UP
[2.1-RELEASE][admin@asus.localdomain]/root(2): pciconf -lvcb
hostb0@pci0:0:0:0:      class=0x060000 card=0x50001458 chip=0x03641106 rev=0x00                                              hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
    bar   [10] = type Prefetchable Memory, range 32, base 0xd0000000, size 13421                                             7728, enabled
    cap 02[80] = AGP v3 8x 4x SBA disabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
hostb1@pci0:0:0:1:      class=0x060000 card=0x00000000 chip=0x13641106 rev=0x00                                              hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
hostb2@pci0:0:0:2:      class=0x060000 card=0x00000000 chip=0x23641106 rev=0x00                                              hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
hostb3@pci0:0:0:3:      class=0x060000 card=0x00000000 chip=0x33641106 rev=0x00                                              hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
hostb4@pci0:0:0:4:      class=0x060000 card=0x00000000 chip=0x43641106 rev=0x00                                              hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
ioapic0@pci0:0:0:5:     class=0x080020 card=0x00000000 chip=0x53641106 rev=0x00                                              hdr=0x00
    class      = base peripheral
    subclass   = interrupt controller
hostb5@pci0:0:0:6:      class=0x060000 card=0x00000000 chip=0x63641106 rev=0x00                                              hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
hostb6@pci0:0:0:7:      class=0x060000 card=0x00000000 chip=0x73641106 rev=0x00                                              hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:0:1:0:       class=0x060400 card=0x00000000 chip=0xb1981106 rev=0x00                                              hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
    cap 01[70] = powerspec 2  supports D0 D3  current D0
pcib2@pci0:0:2:0:       class=0x060400 card=0xc3231106 chip=0xa3641106 rev=0x80                                              hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 256(256) link x0(x16)
    cap 01[68] = powerspec 2  supports D0 D3  current D0
    cap 05[70] = MSI supports 1 message, 64 bit, vector masks
    cap 08[88] = HT MSI fixed address window disabled at 0xfee00000
    cap 0d[98] = PCI Bridge card=0xc3231106
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
ecap 0002[140] = VC 1 max VC1
ecap 0005[180] = unknown 1
pcib3@pci0:0:3:0:       class=0x060400 card=0xc3231106 chip=0xc3641106 rev=0x80                                              hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 128(256) link x1(x1)
    cap 01[68] = powerspec 2  supports D0 D3  current D0
    cap 05[70] = MSI supports 1 message, 64 bit, vector masks
    cap 08[88] = HT MSI fixed address window disabled at 0xfee00000
    cap 0d[98] = PCI Bridge card=0xc3231106
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
ecap 0002[140] = VC 1 max VC1
ecap 0005[180] = unknown 1
atapci0@pci0:0:15:0:    class=0x01018f card=0xb0021458 chip=0x05911106 rev=0x80                                              hdr=0x00
    class      = mass storage
    subclass   = ATA
    bar   [10] = type I/O Port, range 32, base 0xfc00, size  8, enabled
    bar   [14] = type I/O Port, range 32, base 0xf800, size  4, enabled
    bar   [18] = type I/O Port, range 32, base 0xf400, size  8, enabled
    bar   [1c] = type I/O Port, range 32, base 0xf000, size  4, enabled
    bar   [20] = type I/O Port, range 32, base 0xec00, size 16, enabled
    bar   [24] = type I/O Port, range 32, base 0xe800, size 256, enabled
    cap 01[c0] = powerspec 2  supports D0 D3  current D0
atapci1@pci0:0:15:1:    class=0x01018a card=0x50021458 chip=0x05711106 rev=0x07                                              hdr=0x00
    class      = mass storage
    subclass   = ATA
    bar   [20] = type I/O Port, range 32, base 0xe400, size 16, enabled
    cap 01[c0] = powerspec 2  supports D0 D3  current D0
uhci0@pci0:0:16:0:      class=0x0c0300 card=0x50041458 chip=0x30381106 rev=0xa0                                              hdr=0x00
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xe000, size 32, enabled
    cap 01[80] = powerspec 2  supports D0 D1 D2 D3  current D0
uhci1@pci0:0:16:1:      class=0x0c0300 card=0x50041458 chip=0x30381106 rev=0xa0                                              hdr=0x00
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xdc00, size 32, enabled
    cap 01[80] = powerspec 2  supports D0 D1 D2 D3  current D0
uhci2@pci0:0:16:2:      class=0x0c0300 card=0x50041458 chip=0x30381106 rev=0xa0                                              hdr=0x00
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xd800, size 32, enabled
    cap 01[80] = powerspec 2  supports D0 D1 D2 D3  current D0
uhci3@pci0:0:16:3:      class=0x0c0300 card=0x50041458 chip=0x30381106 rev=0xa0                                              hdr=0x00
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xd400, size 32, enabled
    cap 01[80] = powerspec 2  supports D0 D1 D2 D3  current D0
ehci0@pci0:0:16:4:      class=0x0c0320 card=0x31041106 chip=0x31041106 rev=0x86                                              hdr=0x00
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xdffff000, size 256, enabled
    cap 01[80] = powerspec 2  supports D0 D1 D2 D3  current D0
isab0@pci0:0:17:0:      class=0x060100 card=0x33371106 chip=0x33371106 rev=0x00                                              hdr=0x00
    class      = bridge
    subclass   = PCI-ISA
    cap 01[c0] = powerspec 2  supports D0 D3  current D0
hostb7@pci0:0:17:7:     class=0x060000 card=0x337e1106 chip=0x287e1106 rev=0x00                                              hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
    cap 08[58] = HT interrupt
vr0@pci0:0:18:0:        class=0x020000 card=0xe0001458 chip=0x30651106 rev=0x7c                                              hdr=0x00
    class      = network
    subclass   = ethernet
    bar   [10] = type I/O Port, range 32, base 0xd000, size 256, enabled
    bar   [14] = type Memory, range 32, base 0xdfffe000, size 256, enabled
    cap 01[40] = powerspec 2  supports D0 D1 D2 D3  current D0
hostb8@pci0:0:19:0:     class=0x060000 card=0x00000000 chip=0x337b1106 rev=0x00                                              hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
    cap 08[60] = HT MSI fixed address window disabled at 0xfee00000
pcib4@pci0:0:19:1:      class=0x060401 card=0x337a1106 chip=0x337a1106 rev=0x00                                              hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
    cap 08[60] = HT MSI fixed address window disabled at 0xfee00000
    cap 0d[70] = PCI Bridge card=0x337a1106
vgapci0@pci0:1:0:0:     class=0x030000 card=0xd0001458 chip=0x33711106 rev=0x01                                              hdr=0x00
    class      = display
    subclass   = VGA
    bar   [10] = type Prefetchable Memory, range 32, base 0xd8000000, size 67108                                             864, enabled
    bar   [14] = type Memory, range 32, base 0xdd000000, size 16777216, enabled
    cap 01[60] = powerspec 2  supports D0 D1 D2 D3  current D0
    cap 02[70] = AGP v3 8x 4x SBA disabled
none0@pci0:3:0:0:       class=0x028000 card=0x851a1043 chip=0x55921814 rev=0x00                                              hdr=0x00
    class      = network
    bar   [10] = type Memory, range 32, base 0xdfef0000, size 65536, enabled
    cap 01[40] = powerspec 3  supports D0 D3  current D0
    cap 05[50] = MSI supports 32 messages, 64 bit
    cap 10[70] = PCI-Express 2 endpoint max data 128(128) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0003[140] = Serial 1 c907aefffe5d4650
rl0@pci0:4:4:0: class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10 hdr=0x00
    class      = network
    subclass   = ethernet
    bar   [10] = type I/O Port, range 32, base 0x9c00, size 256, enabled
    bar   [14] = type Memory, range 32, base 0xdfaff000, size 256, enabled
    cap 01[50] = powerspec 2  supports D0 D1 D2 D3  current D0
none1@pci0:128:1:0:     class=0x040300 card=0xa0041458 chip=0x32881106 rev=0x10                                              hdr=0x00
    class      = multimedia
    subclass   = HDA
    bar   [10] = type Memory, range 64, base 0xcfffc000, size 16384, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 05[60] = MSI supports 1 message, 64 bit
    cap 10[70] = PCI-Express 1 root endpoint max data 128(128) link x0(x0)
ecap 0002[100] = VC 1 max VC0

forum.lissyara.su

PfSense не видит TP-link TF-3239DL

PfSense не видит TP-link TF-3239DL

Услуги хостинговой компании Host-Food.ru

Re: PfSense не видит TP-link TF-3239DL

Re: PfSense не видит TP-link TF-3239DL