и при попытке сгенерить конфиг получаю в шею
в доке на модем нифига не понял
Код: Выделить всё
[root@genesis /home/ss25]# cfgmaker public@10.100.100.73 > mrtg.cfg
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.100.100.73" [10.100.100.73].161)
community: "public"
request ID: 665183408
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/local/lib/perl5/site_perl/5.8.9/SNMP_util.pm line 629
SNMPWALK Problem for 1.3.6.1.2.1.1 on public@10.100.100.73::::::v4only
at /usr/local/bin/cfgmaker line 950
WARNING: Skipping public@10.100.100.73: as no info could be retrieved
Chapter 8 SNMP
The modem supports SNMP (Simple Network Management Protocol) management.
This chapter describes how to set the SNMP community [Section 8.1], and trap
destinations [Section 8.2].
8.1 Community
Step 1: Enter MAIN/CONF/SNMP/COMMUNITY menu.
Step 2: Enter a parameter in each field. The default settings for read-only
read-write communities are public and private.
Read-Only
Community:
Enter the password for read-only access (default: Public)
Read-Write
Community:
Enter the password for read-write access (default: Private)
Step 3: Hold down the Ctrl-S keys.
8.2 Trap Destinations
Up to five trap destinations are available in the system.
8.2.1 Add Trap Destination Entry
Step 1: Enter the MAIN/CONF/SNMP/TRAP/ADD menu
Step 2: Enter a parameter in the following fields
Version: Version 1/Version 2
Destination IP: Enter the destination IP address
Community: Enter a parameter for the community
Step 3: Hold down the Ctrl-S keys
8.2.2 Delete Trap Destination Entry
Step 1: Enter the MAIN/CONF/SNMP/TRAP menu
Step 2: Enter the following parameters
Version: Version 1/Version 2
Destination IP: Enter the destination IP address
Community: Enter the parameter for the community
Step 3: Hold down the Ctrl-S keys to delete the trap destination entry.
8.2.3 List Trap Destination Entries
To list the trap destination entries, access the MAIN/CONF/SNMP/TRAP/LIST menu.