Сборка ядра не удалась

Проблемы установки, настройки и работы Правильной Операционной Системы

Модератор: terminus

Правила форума
Убедительная просьба юзать теги [cоde] при оформлении листингов.
Сообщения не оформленные должным образом имеют все шансы быть незамеченными.
Аватара пользователя
tom.cat
старшина
Сообщения: 449
Зарегистрирован: 2007-11-24 20:23:49
Откуда: Москва
Контактная информация:

Сборка ядра не удалась

Непрочитанное сообщение tom.cat » 2008-08-30 15:00:18

Всем привет. Замучился с одной проблемой. Решил пересобрать ядро, слишком там много лишнего. Для примера использовал эту статью. Поотключал ненужные устройства.

Листинг ядра:

Код: Выделить всё

#cpu            I486_CPU
#cpu            I586_CPU
cpu             I686_CPU
ident           gateway
maxusers        0

# To statically compile in device wiring instead of /boot/device.hints
hints           "GENERIC.hints"         # Default places to look for devices.

makeoptions     DEBUG=-g                # Build kernel with gdb(1) debug symbols

options         SCHED_4BSD              # 4BSD scheduler
options         PREEMPTION              # Enable kernel thread preemption
options         INET                    # InterNETworking
#options        INET6                   # IPv6 communications protocols
options         SCTP                    # Stream Control Transmission Protocol
options         FFS                     # Berkeley Fast Filesystem
options         SOFTUPDATES             # Enable FFS soft updates support
options         UFS_ACL                 # Support for access control lists
options         UFS_DIRHASH             # Improve performance on big directories
options         UFS_GJOURNAL            # Enable gjournal-based UFS journaling
options         MD_ROOT                 # MD is a potential root device
#options        NFSCLIENT               # Network Filesystem Client
#options        NFSSERVER               # Network Filesystem Server
#options        NFS_ROOT                # NFS usable as /, requires NFSCLIENT
options         MSDOSFS                 # MSDOS Filesystem
options         CD9660                  # ISO 9660 Filesystem
options         PROCFS                  # Process filesystem (requires PSEUDOFS)
options         PSEUDOFS                # Pseudo-filesystem framework
options         GEOM_PART_GPT           # GUID Partition Tables.
options         GEOM_LABEL              # Provides labelization
options         COMPAT_43TTY            # BSD 4.3 TTY compat [KEEP THIS!]
options         COMPAT_FREEBSD4         # Compatible with FreeBSD4
options         COMPAT_FREEBSD5         # Compatible with FreeBSD5
options         COMPAT_FREEBSD6         # Compatible with FreeBSD6
#options        SCSI_DELAY=5000         # Delay (in ms) before probing SCSI
options         KTRACE                  # ktrace(1) support
options         SYSVSHM                 # SYSV-style shared memory
options         SYSVMSG                 # SYSV-style message queues
options         SYSVSEM                 # SYSV-style semaphores
options         _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         ADAPTIVE_GIANT          # Giant mutex is adaptive.
options         STOP_NMI                # Stop CPUS using NMI instead of IPI
options         AUDIT                   # Security event auditing
options         ALTQ
options         ALTQ_CBQ                # Class Bases Queuing (CBQ)
options         ALTQ_RED                # Random Early Detection (RED)
options         ALTQ_RIO                # RED In/Out
options         ALTQ_HFSC               # Hierarchical Packet Scheduler (HFSC)
options         ALTQ_PRIQ               # Priority Queuing (PRIQ)
options         ALTQ_NOPCC              # Required for SMP build
# To make an SMP kernel, the next two lines are needed
options         SMP                     # Symmetric MultiProcessor Kernel
device          apic                    # I/O APIC

# CPU frequency control
device          cpufreq

# Bus support.
#device         eisa
device          pci

# Floppy drives
#device         fdc

# ATA and ATAPI devices
device          ata
device          atadisk         # ATA disk drives
device          ataraid         # ATA RAID drives
device          atapicd         # ATAPI CDROM drives
#device         atapifd         # ATAPI floppy drives
device          atapist         # ATAPI tape drives
options         ATA_STATIC_ID   # Static device numbering

# SCSI Controllers
#device         ahb             # EISA AHA1742 family
#device         ahc             # AHA2940 and onboard AIC7xxx devices
#options        AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~128k to driver.
#device         ahd             # AHA39320/29320 and onboard AIC79xx devices
#options        AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~215k to driver.
#device         amd             # AMD 53C974 (Tekram DC-390(T))
#device         hptiop          # Highpoint RocketRaid 3xxx series
#device         isp             # Qlogic family
#device         ispfw           # Firmware for QLogic HBAs- normally a module
#device         mpt             # LSI-Logic MPT-Fusion
#device         ncr             # NCR/Symbios Logic
#device         sym             # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device         trm             # Tekram DC395U/UW/F DC315U adapters

#device         adv             # Advansys SCSI adapters
#device         adw             # Advansys wide SCSI adapters
#device         aha             # Adaptec 154x SCSI adapters
#device         aic             # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device         bt              # Buslogic/Mylex MultiMaster SCSI adapters

#device         ncv             # NCR 53C500
#device         nsp             # Workbit Ninja SCSI-3
#device         stg             # TMC 18C30/18C50

# SCSI peripherals
#device         scbus           # SCSI bus (required for SCSI)
#device         ch              # SCSI media changers
#device         da              # Direct Access (disks)
#device         sa              # Sequential Access (tape etc)
#device         cd              # CD
#device         pass            # Passthrough device (direct SCSI access)
#device         ses             # SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
#device         amr             # AMI MegaRAID
#device         arcmsr          # Areca SATA II RAID
#device         asr             # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device         ciss            # Compaq Smart RAID 5*
#device         dpt             # DPT Smartcache III, IV - See NOTES for options
#device         hptmv           # Highpoint RocketRAID 182x
#device         hptrr           # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
#device         iir             # Intel Integrated RAID
#device         ips             # IBM (Adaptec) ServeRAID
#device         mly             # Mylex AcceleRAID/eXtremeRAID
#device         twa             # 3ware 9000 series PATA/SATA RAID

# RAID controllers
#device         aac             # Adaptec FSA RAID
#device         aacp            # SCSI passthrough for aac (requires CAM)
#device         ida             # Compaq Smart RAID
#device         mfi             # LSI MegaRAID SAS
#device         mlx             # Mylex DAC960 family
#device         pst             # Promise Supertrak SX6000
#device         twe             # 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc          # AT keyboard controller
device          atkbd           # AT keyboard
#device         psm             # PS/2 mouse

device          kbdmux          # keyboard multiplexer

device          vga             # VGA video card driver

device          splash          # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device          sc

device          agp             # support several AGP chipsets

# Power management support (see NOTES for more options)
#device         apm
# Add suspend/resume support for the i8254.
device          pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device          cbb             # cardbus (yenta) bridge
device          pccard          # PC Card (16-bit) bus
device          cardbus         # CardBus (32-bit) bus

# Serial (COM) ports
device          sio             # 8250, 16[45]50 based serial ports
#device         uart            # Generic UART driver

# Parallel port
device          ppc
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
#device         ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
device          puc

# PCI Ethernet NICs.
#device         de              # DEC/Intel DC21x4x (``Tulip'')
#device         em              # Intel PRO/1000 adapter Gigabit Ethernet Card
#device         ixgb            # Intel PRO/10GbE Ethernet Card
#device         le              # AMD Am7900 LANCE and Am79C9xx PCnet
#device         txp             # 3Com 3cR990 (``Typhoon'')
#device         vx              # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
#device         bce             # Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device         bfe             # Broadcom BCM440x 10/100 Ethernet
#device         bge             # Broadcom BCM570xx Gigabit Ethernet
#device         dc              # DEC/Intel 21143 and various workalikes
device          fxp             # Intel EtherExpress PRO/100B (82557, 82558)
#device         lge             # Level 1 LXT1001 gigabit Ethernet
#device         msk             # Marvell/SysKonnect Yukon II Gigabit Ethernet
#device         nfe             # nVidia nForce MCP on-board Ethernet
#device         nge             # NatSemi DP83820 gigabit Ethernet
#device         nve             # nVidia nForce MCP on-board Ethernet Networking
#device         pcn             # AMD Am79C97x PCI 10/100 (precedence over 'le')
#device         re              # RealTek 8139C+/8169/8169S/8110S
device          rl              # RealTek 8129/8139
#device         sf              # Adaptec AIC-6915 (``Starfire'')
#device         sis             # Silicon Integrated Systems SiS 900/SiS 7016
#device         sk              # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device         ste             # Sundance ST201 (D-Link DFE-550TX)
#device         stge            # Sundance/Tamarack TC9021 gigabit Ethernet
#device         ti              # Alteon Networks Tigon I/II gigabit Ethernet
#device         tl              # Texas Instruments ThunderLAN
#device         tx              # SMC EtherPower II (83c170 ``EPIC'')
#device         vge             # VIA VT612x gigabit Ethernet
#device         vr              # VIA Rhine, Rhine II
#device         wb              # Winbond W89C840F
device          xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard NICs included.
#device         cs              # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device         ed              # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device         ex              # Intel EtherExpress Pro/10 and Pro/10+
#device         ep              # Etherlink III based cards
#device         fe              # Fujitsu MB8696x based cards
#device         ie              # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device         sn              # SMC's 9000 series of Ethernet chips
#device         xe              # Xircom pccard Ethernet

# Wireless NIC cards
#device         wlan            # 802.11 support
#device         wlan_wep        # 802.11 WEP support
#device         wlan_ccmp       # 802.11 CCMP support
#device         wlan_tkip       # 802.11 TKIP support
#device         wlan_amrr       # AMRR transmit rate control algorithm
#device         wlan_scan_ap    # 802.11 AP mode scanning
#device         wlan_scan_sta   # 802.11 STA mode scanning
#device         an              # Aironet 4500/4800 802.11 wireless NICs.
#device         ath             # Atheros pci/cardbus NIC's
#device         ath_hal         # Atheros HAL (Hardware Access Layer)
#device         ath_rate_sample # SampleRate tx rate control for ath
#device         awi             # BayStack 660 and others
#device         ral             # Ralink Technology RT2500 wireless NICs.
#device         wi              # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device         wl              # Older non 802.11 Wavelan wireless NIC.

# Pseudo devices.
device          loop            # Network loopback
device          random          # Entropy device
device          ether           # Ethernet support
device          sl              # Kernel SLIP
device          ppp             # Kernel PPP
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
#device         md              # Memory "disks"
#device         gif             # IPv6 and IPv4 tunneling
#device         faith           # IPv6-to-IPv4 relaying (translation)
#device         firmware        # firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device          bpf             # Berkeley packet filter

# USB support
#device         uhci            # UHCI PCI->USB interface
#device         ohci            # OHCI PCI->USB interface
#device         ehci            # EHCI PCI->USB interface (USB 2.0)
#device         usb             # USB Bus (required)
#device         udbp            # USB Double Bulk Pipe devices
#device         ugen            # Generic
#device         uhid            # "Human Interface Devices"
#device         ukbd            # Keyboard
#device         ulpt            # Printer
#device         umass           # Disks/Mass storage - Requires scbus and da
#device         ums             # Mouse
#device         ural            # Ralink Technology RT2500USB wireless NICs
#device         rum             # Ralink Technology RT2501USB wireless NICs
#device         urio            # Diamond Rio 500 MP3 player
#device         uscanner        # Scanners
# USB Ethernet, requires miibus
#device         aue             # ADMtek USB Ethernet
#device         axe             # ASIX Electronics USB Ethernet
#device         cdce            # Generic USB over Ethernet
#device         cue             # CATC USB Ethernet
#device         kue             # Kawasaki LSI USB Ethernet
#device         rue             # RealTek RTL8150 USB Ethernet

# FireWire support
#device         firewire        # FireWire bus code
#device         sbp             # SCSI over FireWire (Requires scbus and da)
#device         fwe             # Ethernet over FireWire (non-standard!)
#device         fwip            # IP over FireWire (RFC 2734,3146)
#device         dcons           # Dumb console driver
#device         dcons_crom      # Configuration ROM for dcons
Версия операционки:

Код: Выделить всё

FreeBSD host 7.0-RELEASE-p3 FreeBSD 7.0-RELEASE-p3 #0: Fri Aug 22 18:29:57 MSD 2008     vovas@host:/usr/obj/usr/src/sys/GENERIC  i386
Ошибка возникает при построении ядра. Сначала я делаю перед сборкой

Код: Выделить всё

# rm -r /usr/obj
Далее:

Код: Выделить всё

#make -s buildkernel KERNCONF=gateway.2008-27-08
Ошибка следующая

Код: Выделить всё

--------------------------------------------------------------
>>> stage 3.2: building everything
--------------------------------------------------------------

cc1: warnings being treated as errors
/usr/src/sys/dev/ata/ata-dma.c: In function 'ata_dmaalloc':
/usr/src/sys/dev/ata/ata-dma.c:140: warning: dereferencing type-punned pointer will break strict-aliasing rules
*** Error code 1

Stop in /usr/obj/usr/src/sys/gateway.2008-27-08.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.
В чем грабли?
Последний раз редактировалось tom.cat 2008-08-30 20:00:48, всего редактировалось 1 раз.
When you see pigs fly it means Windows has become open source

Хостинговая компания Host-Food.ru
Хостинг HostFood.ru
 

Услуги хостинговой компании Host-Food.ru

Хостинг HostFood.ru

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

Аватара пользователя
zingel
beastie
Сообщения: 6204
Зарегистрирован: 2007-10-30 3:56:49
Откуда: Moscow
Контактная информация:

Re: Сборка ядра не удалсь

Непрочитанное сообщение zingel » 2008-08-30 15:03:15

SCTP вместе с INET6 нужно комментить
Z301171463546 - можно пожертвовать мне денег

Аватара пользователя
tom.cat
старшина
Сообщения: 449
Зарегистрирован: 2007-11-24 20:23:49
Откуда: Москва
Контактная информация:

Re: Сборка ядра не удалсь

Непрочитанное сообщение tom.cat » 2008-08-30 15:08:50

Разве это связано с ошибкой? Закомментировал SCTP, попробовал пересобрать - та же фигня. Есть еще предложения?
When you see pigs fly it means Windows has become open source

Аватара пользователя
zingel
beastie
Сообщения: 6204
Зарегистрирован: 2007-10-30 3:56:49
Откуда: Moscow
Контактная информация:

Re: Сборка ядра не удалсь

Непрочитанное сообщение zingel » 2008-08-30 15:17:31

Дифать вывод dmesg и конфиг, смотреть, какое устройство в конфиге не подключено (закомменчено)

p.s. Дженерик - собирается?*
Z301171463546 - можно пожертвовать мне денег

Аватара пользователя
tom.cat
старшина
Сообщения: 449
Зарегистрирован: 2007-11-24 20:23:49
Откуда: Москва
Контактная информация:

Re: Сборка ядра не удалсь

Непрочитанное сообщение tom.cat » 2008-08-30 15:26:01

Дженерик как раз собрался. Я недавно делал обновление фри до p3.

Вот dmesg.boot:

Код: Выделить всё

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE-p3 #0: Fri Aug 22 18:29:57 MSD 2008
    vovas@host:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.52-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf43  Stepping = 3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x649d<SSE3,RSVD2,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
  AMD Features=0x20000000<LM>
  Logical CPUs per core: 2
real memory  = 1065091072 (1015 MB)
avail memory = 1028648960 (980 MB)
ACPI APIC Table: <A M I  OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Aug 22 2008 18:26:50)
acpi0: <A M I OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3f700000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  49, should be 3C [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [SSDT] -  D7, should be EB [20070320]
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4800-0x4807 mem 0xcfd80000-0xcfdfffff,0xd0000000-0xdfffffff,0xcfe80000-0xcfebffff irq 16 at device 2.0 on pci0
agp0: <Intel 82915G (915G GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xcfe00000-0xcfe7ffff at device 2.1 on pci0
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x5000-0x501f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x5400-0x541f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x5800-0x581f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x6000-0x601f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xcfeffc00-0xcfefffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib5
atapci0: <ITE IT8211F UDMA133 controller> port 0xa000-0xa007,0x9800-0x9803,0x9400-0x9407,0x9000-0x9003,0x8800-0x880f irq 20 at device 3.0 on pci1
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
fxp0: <Intel 82562EZ (ICH6)> port 0xa400-0xa43f mem 0xcfffe000-0xcfffefff irq 20 at device 8.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:15:f2:14:d2:a2
fxp0: [ITHREAD]
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa800-0xa87f mem 0xcffffc00-0xcffffc7f irq 21 at device 11.0 on pci1
miibus1: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> PHY 24 on miibus1
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:76:a0:90:44
xl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
ata1: [ITHREAD]
atapci2: <Intel ICH6 SATA150 controller> port 0x7800-0x7807,0x7400-0x7403,0x7000-0x7007,0x6800-0x6803,0x6400-0x640f irq 19 at device 31.2 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xca800-0xcafff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
hptrr: no controller detected.
acd0: CDROM <SAMSUNG CD-ROM SC-152C/CS04> at ata0-master PIO4
ad8: 76319MB <WDC WD800JD-60LSA0 07.01D07> at ata4-master SATA150
ad10: 476940MB <WDC WD5000AAKS-22YGA0 12.01C02> at ata5-master SATA150
SMP: AP CPU #1 Launched!
Погуглил по этой ошибке

Код: Выделить всё

/usr/src/sys/dev/ata/ata-dma.c: In function 'ata_dmaalloc'
Но ничего путного не наел. У меня поддержка ata включена в ядре.
When you see pigs fly it means Windows has become open source

Аватара пользователя
zingel
beastie
Сообщения: 6204
Зарегистрирован: 2007-10-30 3:56:49
Откуда: Moscow
Контактная информация:

Re: Сборка ядра не удалсь

Непрочитанное сообщение zingel » 2008-08-30 15:29:33

раскомменть, то что есть в дмесг, и скажи что есть в /etc/make.conf
Z301171463546 - можно пожертвовать мне денег

Гость
проходил мимо

Re: Сборка ядра не удалсь

Непрочитанное сообщение Гость » 2008-08-30 15:41:00

tom.cat писал(а):

Код: Выделить всё

cc1: warnings being treated as errors
/usr/src/sys/dev/ata/ata-dma.c: In function 'ata_dmaalloc':
/usr/src/sys/dev/ata/ata-dma.c:140: warning: dereferencing type-punned pointer will break strict-aliasing rules
Собирай с WERROR="" (обнуляем опцию) и пинай re@freebsd.org. Компилятор говорит, что могут быть грабли, если включен -fstrict-aliasing, а посколькоу врублен -Werror, то он стопорится на нем.

-fstrict-aliasing входит в -O2, но во фре по дефолту -O2 -fno-strict-aliasing -pipe

Аватара пользователя
tom.cat
старшина
Сообщения: 449
Зарегистрирован: 2007-11-24 20:23:49
Откуда: Москва
Контактная информация:

Re: Сборка ядра не удалсь

Непрочитанное сообщение tom.cat » 2008-08-30 15:48:57

В make.conf даже не заглядывал :( Сто лет назад добавлял...
make.conf

Код: Выделить всё

COMPATXX=yes
CFLAGS =-O99 -pipe
CXXFLAGS += -fconserve-space
COPTFLAGS += -O99 -pipe
CPUTYPE=pentium4
WITH_LINUX=yes
BATCH=yes
UPGRADE_TOOL=yes
XORG_UPDATE=yes
X11BASE=/usr/local
USE_NONDEFAULT_X11BASE=yes
PERL_VER=5.8.8
PERL_VERSION=5.8.8
Расскоментировал все из dmesg. Попробовал еще раз собрать, та же ошибка.
When you see pigs fly it means Windows has become open source

Аватара пользователя
zingel
beastie
Сообщения: 6204
Зарегистрирован: 2007-10-30 3:56:49
Откуда: Moscow
Контактная информация:

Re: Сборка ядра не удалсь

Непрочитанное сообщение zingel » 2008-08-30 15:53:03

ну а в мейке параметры заккомменти:

Код: Выделить всё

COMPATXX=yes
CFLAGS =-O99 -pipe
CXXFLAGS += -fconserve-space
COPTFLAGS += -O99 -pipe
CPUTYPE=pentium4
BATCH=yes
и сделай

Код: Выделить всё

make cleandir 
и всё такое, заново ведь будешь собирать же...
Z301171463546 - можно пожертвовать мне денег

Аватара пользователя
tom.cat
старшина
Сообщения: 449
Зарегистрирован: 2007-11-24 20:23:49
Откуда: Москва
Контактная информация:

Re: Сборка ядра не удалсь

Непрочитанное сообщение tom.cat » 2008-08-30 19:53:55

Спасибо :drinks: Собралось ядрышко и установилось. Проблема была в make.conf. Тему можно закрыть.
When you see pigs fly it means Windows has become open source