FreeBSD 8.2 на Acer Aspire 3690 WI-FI

[windecoder]

имеется 8.2 установленная на азер.
при загрузке не горит светодиод wi-fi сетевушки, при создании wlan0 не видит точек доступа. Если делать hostap то другими девайсами тож не видится. Ощущение что надо сказать "мол включи-ка мне wi-fi". только кому?
ЗЫ. сетевушка Atheros AR5005G

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[rayder]

стесняюсь спросить. а где dmesg, pciconf -lvcb, ifconfig и иже с ними?

[windecoder]

dmesg:

Код: Выделить всё

Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-RELEASE #0: Thu Feb 16 10:02:30 MSK 2012
    root@gate.localdomain:/usr/obj/usr/src/sys/MY100112 i386
module_register: module g_label already exists!
Module g_label failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) M CPU        430  @ 1.73GHz (1729.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6e8  Family = 6  Model = e  Stepping = 8
  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0xc109<SSE3,MON,TM2,xTPR,PDCM>
  AMD Features=0x100000<NX>
  TSC: P-state invariant
real memory  = 536870912 (512 MB)
avail memory = 496656384 (473 MB)
ACPI APIC Table: <Acer   Grape   >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <PTLTD Capell00> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "HPET" frequency 14318180 Hz quality 900
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x19> port 0x62,0x66 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xd0100000-0xd017ffff,0xc0000000-0xcfffffff,0xd0200000-0xd023ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xd0180000-0xd01fffff at device 2.1 on pci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x1820-0x183f irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x1840-0x185f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x1860-0x187f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x1880-0x189f irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xd0444000-0xd04443ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib5
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xd0010000-0xd0011fff irq 21 at device 1.0 on pci6
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> PHY 1 on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:16:d4:4f:7f:c0
bfe0: [ITHREAD]
ath0: <Atheros 2413> mem 0xd0000000-0xd000ffff irq 22 at device 2.0 on pci6
ath0: [ITHREAD]
ath0: AR2413 mac 7.8 RF2413 phy 4.5
cbb0: <PCI-CardBus Bridge> mem 0xd0012000-0xd0012fff irq 16 at device 4.0 on pci6
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
pci6: <memory, flash> at device 4.1 (no driver attached)
pci6: <base peripheral, SD host controller> at device 4.2 (no driver attached)
pci6: <memory, flash> at device 4.3 (no driver attached)
pci6: <memory, flash> at device 4.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
acpi_acad0: <AC Adapter> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xe0000-0xe17ff,0xe3800-0xe3fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounter "TSC" frequency 1729011674 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, rule-based forwarding enabled, default to deny, logging disabled
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
The GEOM class LABEL is already loaded.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
acd0: DVDR <HL-DT-ST DVDRAM GSA-T10N/PP02> at ata0-slave UDMA33
cardbus0: <network> at device 0.0 (no driver attached)
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen4.2: <JetFlash> at usbus4
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.42, addr 2> on usbus4
umass0:  SCSI over Bulk-Only; quirks = 0x4101
umass0:0:0:-1: Attached to scbus0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <JetFlash TS2GJF150 8.07> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1955MB (4005886 512 byte sectors: 255H 63S/T 249C)
Trying to mount root from ufs:/dev/ufs/RootOnUSB

pciconf -lvcb

Код: Выделить всё

hostb0@pci0:0:0:0:      class=0x060000 card=0x00901025 chip=0x27a08086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '955XM/945GM/PM/GMS/940GML Express Processor to DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
    cap 09[e0] = vendor (length 9) Intel cap 7 version 1
vgapci0@pci0:0:2:0:     class=0x030000 card=0x00901025 chip=0x27a28086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile 945GM/GU Express Integrated Graphics Controller'
    class      = display
    subclass   = VGA
    bar   [10] = type Memory, range 32, base 0xd0100000, size 524288, enabled
    bar   [14] = type I/O Port, range 32, base 0x1800, size  8, enabled
    bar   [18] = type Prefetchable Memory, range 32, base 0xc0000000, size 268435456, enabled
    bar   [1c] = type Memory, range 32, base 0xd0200000, size 262144, enabled
    cap 05[90] = MSI supports 1 message
    cap 01[d0] = powerspec 2  supports D0 D3  current D0
vgapci1@pci0:0:2:1:     class=0x038000 card=0x00901025 chip=0x27a68086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile 945GM/GU Express Integrated Graphics Controller'
    class      = display
    bar   [10] = type Memory, range 32, base 0xd0180000, size 524288, enabled
    cap 01[d0] = powerspec 2  supports D0 D3  current D0
none0@pci0:0:27:0:      class=0x040300 card=0x00901025 chip=0x27d88086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'IDT High Definition Audio Driver  (BA101897)'
    class      = multimedia
    subclass   = HDA
    bar   [10] = type Memory, range 64, base 0xd0240000, size 16384, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 05[60] = MSI supports 1 message, 64 bit
    cap 10[70] = PCI-Express 1 root endpoint max data 128(128) link x0(x0)
ecap 0002[100] = VC 1 max VC1
ecap 0005[130] = unknown 1
pcib1@pci0:0:28:0:      class=0x060400 card=0x00901025 chip=0x27d08086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) PCIe Root Port'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 128(128) link x0(x1)
    cap 05[80] = MSI supports 1 message
    cap 0d[90] = PCI Bridge card=0x00901025
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
ecap 0002[100] = VC 1 max VC1
ecap 0005[180] = unknown 1
pcib2@pci0:0:28:1:      class=0x060400 card=0x00901025 chip=0x27d28086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) PCIe Root Port'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 128(128) link x0(x1)
    cap 05[80] = MSI supports 1 message
    cap 0d[90] = PCI Bridge card=0x00901025
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
ecap 0002[100] = VC 1 max VC1
ecap 0005[180] = unknown 1
pcib3@pci0:0:28:2:      class=0x060400 card=0x00901025 chip=0x27d48086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) PCIe Root Port'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 128(128) link x0(x1)
    cap 05[80] = MSI supports 1 message
    cap 0d[90] = PCI Bridge card=0x00901025
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
ecap 0002[100] = VC 1 max VC1
ecap 0005[180] = unknown 1
pcib4@pci0:0:28:3:      class=0x060400 card=0x00901025 chip=0x27d68086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) PCIe Root Port'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 128(128) link x0(x1)
    cap 05[80] = MSI supports 1 message
    cap 0d[90] = PCI Bridge card=0x00901025
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
ecap 0002[100] = VC 1 max VC1
ecap 0005[180] = unknown 1
uhci0@pci0:0:29:0:      class=0x0c0300 card=0x00901025 chip=0x27c88086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0x1820, size 32, enabled
uhci1@pci0:0:29:1:      class=0x0c0300 card=0x00901025 chip=0x27c98086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0x1840, size 32, enabled
uhci2@pci0:0:29:2:      class=0x0c0300 card=0x00901025 chip=0x27ca8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0x1860, size 32, enabled
uhci3@pci0:0:29:3:      class=0x0c0300 card=0x00901025 chip=0x27cb8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0x1880, size 32, enabled
ehci0@pci0:0:29:7:      class=0x0c0320 card=0x00901025 chip=0x27cc8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xd0444000, size 1024, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
pcib5@pci0:0:30:0:      class=0x060401 card=0x00901025 chip=0x24488086 rev=0xe2 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
    cap 0d[50] = PCI Bridge card=0x00901025
isab0@pci0:0:31:0:      class=0x060100 card=0x00901025 chip=0x27b98086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801GBM (ICH7-M) LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
    cap 09[e0] = vendor (length 12) Intel cap 1 version 0
                 features: Quick Resume, SATA RAID-5, Mobile, 6 PCI-e x1 slots, SATA RAID-0/1/10
atapci0@pci0:0:31:1:    class=0x01018a card=0x00901025 chip=0x27df8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) Ultra ATA Storage Controller'
    class      = mass storage
    subclass   = ATA
    bar   [10] = type I/O Port, range 32, base 0x1f0, size  8, enabled
    bar   [14] = type I/O Port, range 32, base 0x3f4, size  1, enabled
    bar   [18] = type I/O Port, range 32, base 0x170, size  8, enabled
    bar   [1c] = type I/O Port, range 32, base 0x374, size  1, enabled
    bar   [20] = type I/O Port, range 32, base 0x1810, size 16, enabled
none1@pci0:0:31:3:      class=0x0c0500 card=0x00901025 chip=0x27da8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Intel[R] 82801G (ICH7 Family) C- 27DA (82801G)'
    class      = serial bus
    subclass   = SMBus
    bar   [20] = type I/O Port, range 32, base 0x18a0, size 32, enabled
bfe0@pci0:6:1:0:        class=0x020000 card=0x00901025 chip=0x170c14e4 rev=0x02 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'Broadcom NetLink 4401 10/100 Ethernet NIC (BCM4401)'
    class      = network
    subclass   = ethernet
    bar   [10] = type Memory, range 32, base 0xd0010000, size 8192, enabled
    cap 01[40] = powerspec 2  supports D0 D1 D2 D3  current D0
ath0@pci0:6:2:0:        class=0x020000 card=0x04181468 chip=0x001a168c rev=0x01 hdr=0x00
    vendor     = 'Atheros Communications Inc.'
    device     = 'http://cr.am/framed.php?url=http%3A%2F%2Fwww.tp%2Dlink.com%2Fsupport%2Fdownload.asp&ref=driverguide (Atheros AR5005G)'
    class      = network
    subclass   = ethernet
    bar   [10] = type Memory, range 32, base 0xd0000000, size 65536, enabled
    cap 01[44] = powerspec 2  supports D0 D3  current D0
cbb0@pci0:6:4:0:        class=0x060700 card=0x00901025 chip=0x14121524 rev=0x10 hdr=0x02
    vendor     = 'ENE Technology Inc'
    device     = 'CB-712/714 CardBus Controller'
    class      = bridge
    subclass   = PCI-CardBus
    bar   [10] = type Memory, range 32, base 0xd0012000, size 4096, enabled
    cap 01[a0] = powerspec 1  supports D0 D1 D2 D3  current D0
none2@pci0:6:4:1:       class=0x050100 card=0x00901025 chip=0x05301524 rev=0x01 hdr=0x00
    vendor     = 'ENE Technology Inc'
    device     = 'Memory Stick Card Reader (CB-712/714/810)'
    class      = memory
    subclass   = flash
    bar   [10] = type Memory, range 32, base 0xd0013000, size 128, enabled
    cap 01[80] = powerspec 2  supports D0 D1 D2 D3  current D0
none3@pci0:6:4:2:       class=0x080501 card=0x00901025 chip=0x05501524 rev=0x01 hdr=0x00
    vendor     = 'ENE Technology Inc'
    device     = 'Secure Digital Card Reader (CB-712/714/810)'
    class      = base peripheral
    subclass   = SD host controller
    bar   [10] = type Memory, range 32, base 0xd0013400, size 256, enabled
    cap 01[80] = powerspec 2  supports D0 D1 D2 D3  current D0
none4@pci0:6:4:3:       class=0x050100 card=0x00901025 chip=0x05201524 rev=0x01 hdr=0x00
    vendor     = 'ENE Technology Inc'
    device     = 'PCI SmartMedia / xD Card Reader Controller'
    class      = memory
    subclass   = flash
    bar   [10] = type Memory, range 32, base 0xd0013800, size 128, enabled
    cap 01[80] = powerspec 2  supports D0 D1 D2 D3  current D0
none5@pci0:6:4:4:       class=0x050100 card=0x00901025 chip=0x05511524 rev=0x01 hdr=0x00
    vendor     = 'ENE Technology Inc'
    device     = 'PCI SD/MMC Card Reader Controller'
    class      = memory
    subclass   = flash
    cap 01[80] = powerspec 2  supports D0 D1 D2 D3  current D0
none6@pci0:7:0:0:       class=0x028000 card=0x041814e4 chip=0x432014e4 rev=0x03 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = '802.11b/g Wireless LAN Controller (BCM4309)'
    class      = network
    bar   [10] = type Memory, range 32, base 0x88000000, size 8192, enabled

ifconfig

Код: Выделить всё

ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
        ether 00:16:cf:91:e3:af
        media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
        status: associated
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=3<RXCSUM,TXCSUM>
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 00:16:cf:91:e3:af
        media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
        status: no carrier
        ssid "" channel 12 (2467 MHz 11g)
        regdomain 99 indoor ecm authmode OPEN privacy OFF txpower 20 bmiss 7
        scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7
        roam:rate 5 protmode CTS wme burst bintval 0

ifconfig wlan0 scan задумывается до бесконечности...
зы. забыл сказать на морде есть кнопка включения на нее ни как не реагирует

[rayder]

Если честно, в настройках wi-fi не силен, ибо не было необходимости. конфиги попросил выложить, ибо все-равно попросят
но меня насторожило это:

Код: Выделить всё

ipfw2 (+ipv6) initialized, divert enabled, nat enabled, rule-based forwarding enabled, [b]default to deny[/b], logging disabled

чисто теоретически вполне может мешать. включи на фаере allow all fro any to any.

и соб-но понаблюдай tcpdump что-нибудь видит на интерфейсе при скане и иже с ним?

[windecoder]

default to deny
это при сборке указано. во время настройки естественно стоит allow ip from any to any

[rayder]

кстати где-то на форуме похожая тема была, поищи может что полезное найдешь

[Neus]

none6@pci0:7:0:0: class=0x028000 card=0x041814e4 chip=0x432014e4 rev=0x03 hdr=0x00
vendor = 'Broadcom Corporation'
device = '802.11b/g Wireless LAN Controller (BCM4309)'

а это что за девайс?
на буке 2 вайфая ?

[windecoder]

этот pc card

[f_andrey]

А чего не работает то? пока вроде всё показанное работает вполне прилично.
И да что в итоге то хотите, куда то подключится, или чтоб к вам подключались, и самое главное что для этого предприняли?
Ну и с атеротом, я конечно не то чтоб сильно за темой следил, но вот хотя бы до 9-ки думаю очень не вредно обновится, если и правда что то будет работать не удовлетворительно

[windecoder]

А чего не работает то?

не работает то что сетевушка не видит ни точек доступа, если из нее делать hostap то ее тоже ни кто не видит.
в 9-ку грузился, тот же эффект

[neurobomman]

а что в /etc/rc.conf написано по поводу wlan0?