Помогите разобраться с неработающим MPD5
Не понимаю что он от меня хочет!
В вин 7 64, при соединении, пишет ошибка 619
Вот что есть:
Код: Выделить всё
uname -a
FreeBSD server2 8.2-RELEASE FreeBSD 8.2-RELEASE #0: Mon Feb 6 14:24:37 MSK 2012
Код: Выделить всё
startup:
<------># configure mpd users
<------>set user foo bar admin
<------>set user foo1 bar1
<------># configure the console
<------>set console self 127.0.0.1 5005
<------>set console open
<------># configure the web server
<------>set web self 127.0.0.1 5006
<------>set web open
default:
<------>load pptp_server
pptp_server:
<------>set ippool add pool1 192.168.0.50 192.168.0.52
# Create clonable bundle template named B
<------>create bundle template B
<------>set iface enable proxy-arp
<------>set iface idle 1800
<------>set iface enable tcpmssfix
<------>set ipcp yes vjcomp
# Specify IP address pool for dynamic assigment.
<------>set ipcp ranges 192.168.0.1/32 ippool pool1
<------>set ipcp dns 192.168.0.1
<------>set ipcp nbns 192.168.0.1
# The five lines below enable Microsoft Point-to-Point encryption
# (MPPE) using the ng_mppc(8) netgraph node type.
<------>set bundle enable compression
<------>set ccp yes mppc
<------>set mppc yes e40
<------>set mppc yes e128
<------>set mppc yes stateless
# Create clonable link template named L
<------>create link template L pptp
# Set bundle template to use
<------>set link action bundle B
# Multilink adds some overhead, but gives full 1500 MTU.
<------>set link enable multilink
<------>set link yes acfcomp protocomp
<------>set link no pap chap eap
<------>set link enable chap
# We can use use RADIUS authentication/accounting by including
# another config section with label 'radius'.
#<----->load radius
<------>set link keep-alive 10 60
# We reducing link mtu to avoid GRE packet fragmentation.
<------>set link mtu 1460
# Configure PPTP
<------>set pptp self 89.168.12.55
# Allow to accept calls
<------>set link enable incoming
Код: Выделить всё
mpd: PPTP: waiting for connection on 89.168.12.55 1723
[L-1] Accepting PPTP connection
[L-1] Link: OPEN event
[L-1] LCP: Open event
[L-1] LCP: state change Initial --> Starting
[L-1] LCP: LayerStart
[L-1] PPTP: attaching to peer's outgoing call
[L-1] Link: UP event
[L-1] LCP: Up event
[L-1] LCP: state change Starting --> Req-Sent
[L-1] LCP: SendConfigReq #1
[L-1] ACFCOMP
[L-1] PROTOCOMP
[L-1] MRU 1500
[L-1] MAGICNUM 566b6ef8
[L-1] AUTHPROTO CHAP MSOFTv2
[L-1] MP MRRU 2048
[L-1] MP SHORTSEQ
[L-1] ENDPOINTDISC [802.1] 00 50 da 67 fd 77
[L-1] LCP: rec'd Configure Request #0 (Req-Sent)
[L-1] MRU 1400
[L-1] MAGICNUM 3b0e75de
[L-1] PROTOCOMP
[L-1] ACFCOMP
[L-1] CALLBACK 6
[L-1] LCP: SendConfigRej #0
[L-1] CALLBACK 6
[L-1] LCP: SendConfigReq #2
[L-1] ACFCOMP
[L-1] PROTOCOMP
[L-1] MRU 1500
[L-1] MAGICNUM 566b6ef8
[L-1] AUTHPROTO CHAP MSOFTv2
[L-1] MP MRRU 2048
[L-1] MP SHORTSEQ
[L-1] ENDPOINTDISC [802.1] 00 50 da 67 fd 77
[L-1] LCP: rec'd Configure Request #1 (Req-Sent)
[L-1] MRU 1400
[L-1] MAGICNUM 3b0e75de
[L-1] PROTOCOMP
[L-1] ACFCOMP
[L-1] CALLBACK 6
[L-1] LCP: SendConfigRej #1
[L-1] CALLBACK 6
[L-1] LCP: SendConfigReq #3
[L-1] ACFCOMP
[L-1] PROTOCOMP
[L-1] MRU 1500
[L-1] MAGICNUM 566b6ef8
[L-1] AUTHPROTO CHAP MSOFTv2
[L-1] MP MRRU 2048
[L-1] MP SHORTSEQ
[L-1] ENDPOINTDISC [802.1] 00 50 da 67 fd 77
[L-1] LCP: rec'd Configure Request #2 (Req-Sent)
[L-1] MRU 1400
[L-1] MAGICNUM 3b0e75de
[L-1] PROTOCOMP
[L-1] ACFCOMP
[L-1] CALLBACK 6
[L-1] LCP: SendConfigRej #2
[L-1] CALLBACK 6
[L-1] LCP: SendConfigReq #4
[L-1] ACFCOMP
[L-1] PROTOCOMP
[L-1] MRU 1500
[L-1] MAGICNUM 566b6ef8
[L-1] AUTHPROTO CHAP MSOFTv2
[L-1] MP MRRU 2048
[L-1] MP SHORTSEQ
[L-1] ENDPOINTDISC [802.1] 00 50 da 67 fd 77
[L-1] LCP: SendConfigReq #5
[L-1] ACFCOMP
[L-1] PROTOCOMP
[L-1] MRU 1500
[L-1] MAGICNUM 566b6ef8
[L-1] AUTHPROTO CHAP MSOFTv2
[L-1] MP MRRU 2048
[L-1] MP SHORTSEQ
[L-1] ENDPOINTDISC [802.1] 00 50 da 67 fd 77
[L-1] LCP: rec'd Configure Request #3 (Req-Sent)
[L-1] MRU 1400
[L-1] MAGICNUM 3b0e75de
[L-1] PROTOCOMP
[L-1] ACFCOMP
[L-1] CALLBACK 6
[L-1] LCP: SendConfigRej #3
[L-1] CALLBACK 6
[L-1] LCP: SendConfigReq #6
[L-1] ACFCOMP
[L-1] PROTOCOMP
[L-1] MRU 1500
[L-1] MAGICNUM 566b6ef8
[L-1] AUTHPROTO CHAP MSOFTv2
[L-1] MP MRRU 2048
[L-1] MP SHORTSEQ
[L-1] ENDPOINTDISC [802.1] 00 50 da 67 fd 77
[L-1] LCP: SendConfigReq #7
[L-1] ACFCOMP
[L-1] PROTOCOMP
[L-1] MRU 1500
[L-1] MAGICNUM 566b6ef8
[L-1] AUTHPROTO CHAP MSOFTv2
[L-1] MP MRRU 2048
[L-1] MP SHORTSEQ
[L-1] ENDPOINTDISC [802.1] 00 50 da 67 fd 77
[L-1] LCP: rec'd Configure Request #4 (Req-Sent)
[L-1] MRU 1400
[L-1] MAGICNUM 3b0e75de
[L-1] PROTOCOMP
[L-1] ACFCOMP
[L-1] CALLBACK 6
[L-1] LCP: SendConfigRej #4
[L-1] CALLBACK 6
[L-1] LCP: SendConfigReq #8
[L-1] ACFCOMP
[L-1] PROTOCOMP
[L-1] MRU 1500
[L-1] MAGICNUM 566b6ef8
[L-1] AUTHPROTO CHAP MSOFTv2
[L-1] MP MRRU 2048
[L-1] MP SHORTSEQ
[L-1] ENDPOINTDISC [802.1] 00 50 da 67 fd 77
[L-1] LCP: SendConfigReq #9
[L-1] ACFCOMP
[L-1] PROTOCOMP
[L-1] MRU 1500
[L-1] MAGICNUM 566b6ef8
[L-1] AUTHPROTO CHAP MSOFTv2
[L-1] MP MRRU 2048
[L-1] MP SHORTSEQ
[L-1] ENDPOINTDISC [802.1] 00 50 da 67 fd 77
[L-1] LCP: rec'd Configure Request #5 (Req-Sent)
[L-1] MRU 1400
[L-1] MAGICNUM 3b0e75de
[L-1] PROTOCOMP
[L-1] ACFCOMP
[L-1] CALLBACK 6
[L-1] LCP: not converging
[L-1] LCP: parameter negotiation failed
[L-1] LCP: state change Req-Sent --> Stopped
[L-1] LCP: LayerFinish
[L-1] PPTP call terminated
[L-1] Link: DOWN event
[L-1] LCP: Close event
[L-1] LCP: state change Stopped --> Closed
[L-1] LCP: Down event
[L-1] LCP: state change Closed --> Initial
[L-1] Link: SHUTDOWN event
[L-1] Link: Shutdown
