Неперезагружается после freebsd-update

[Violator]

Делаю

Код: Выделить всё

freebsd-update fetch
freebsd-update install
reboot

И само не перезапускается, останавливается на "All buffers synced". Только аппаратный ресет. После этого все ок (включая reboot).
Проверено на freebsd 8.3 x64 и 9.0 x64 на разном железе (у немцев и на HP DL160).

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[Electronik]

ядро своё или generic?

[Violator]

Все из коробки. Практически первое действие в свежеустановленной системе.

[Electronik]

диски в рэйде? какой рэйд контроллер?

[Neus]

shutdown -r now
а так?

[Electronik]

dmesg -a покажите

[Violator]

shutdown -r now

Надо ждать следующего обновления. Сейчас на обновленной системе нет смысла проверять ибо сработает.

Код: Выделить всё

# dmesg -a
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE-p3 #0: Tue Jun 12 02:52:29 UTC 2012
    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
CPU: Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz (2266.80-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x106a5  Family = 6  Model = 1a  Stepping = 5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 25769803776 (24576 MB)
avail memory = 24795017216 (23646 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
 cpu8 (AP): APIC ID: 16
 cpu9 (AP): APIC ID: 17
 cpu10 (AP): APIC ID: 18
 cpu11 (AP): APIC ID: 19
 cpu12 (AP): APIC ID: 20
 cpu13 (AP): APIC ID: 21
 cpu14 (AP): APIC ID: 22
 cpu15 (AP): APIC ID: 23
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci8: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci7: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci6: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib4
igb0: <Intel(R) PRO/1000 Network Connection version - 2.2.5> port 0xe880-0xe89f mem 0xfbe60000-0xfbe7ffff,0xfbe40000-0xfbe5ffff,0xfbeb8000-0xfbebbfff irq 32 at device 0.0 on pci5
igb0: Using MSIX interrupts with 9 vectors
igb0: Ethernet address: 18:a9:05:6e:89:b2
igb1: <Intel(R) PRO/1000 Network Connection version - 2.2.5> port 0xec00-0xec1f mem 0xfbee0000-0xfbefffff,0xfbec0000-0xfbedffff,0xfbebc000-0xfbebffff irq 42 at device 0.1 on pci5
igb1: Using MSIX interrupts with 9 vectors
igb1: Ethernet address: 18:a9:05:6e:89:b3
pcib5: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci4: <ACPI PCI bus> on pcib5
ciss0: <HP Smart Array P410> port 0xd800-0xd8ff mem 0xfbc00000-0xfbdfffff,0xfbbff000-0xfbbfffff irq 33 at device 0.0 on pci4
ciss0: PERFORMANT Transport
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xb800-0xb81f irq 16 at device 26.0 on pci0
uhci0: LegSup = 0x2400
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfaffa000-0xfaffa3ff irq 18 at device 26.7 on pci0
usbus1: EHCI version 1.0
usbus1: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> mem 0xf8000000-0xf8ffffff,0xfbafc000-0xfbafffff,0xfb000000-0xfb7fffff irq 16 at device 0.0 on pci2
uhci1: <Intel 82801JI (ICH10) USB controller USB-A> port 0xb880-0xb89f irq 23 at device 29.0 on pci0
uhci1: LegSup = 0x2400
usbus2: <Intel 82801JI (ICH10) USB controller USB-A> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-B> port 0xbc00-0xbc1f irq 19 at device 29.1 on pci0
uhci2: LegSup = 0x2400
usbus3: <Intel 82801JI (ICH10) USB controller USB-B> on uhci2
uhci3: <Intel 82801JI (ICH10) USB controller USB-C> port 0xc000-0xc01f irq 18 at device 29.2 on pci0
uhci3: LegSup = 0x2400
usbus4: <Intel 82801JI (ICH10) USB controller USB-C> on uhci3
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH10 AHCI SATA controller> port 0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc09f mem 0xfaffc000-0xfaffc7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
acpi_button0: <Power Button> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
qpi0: <QPI system bus> on motherboard
pcib9: <QPI Host-PCI bridge> pcibus 255 on qpi0
pci255: <PCI bus> on pcib9
pcib10: <QPI Host-PCI bridge> pcibus 254 on qpi0
pci254: <PCI bus> on pcib10
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
est8: <Enhanced SpeedStep Frequency Control> on cpu8
p4tcc8: <CPU Frequency Thermal Control> on cpu8
est9: <Enhanced SpeedStep Frequency Control> on cpu9
p4tcc9: <CPU Frequency Thermal Control> on cpu9
est10: <Enhanced SpeedStep Frequency Control> on cpu10
p4tcc10: <CPU Frequency Thermal Control> on cpu10
est11: <Enhanced SpeedStep Frequency Control> on cpu11
p4tcc11: <CPU Frequency Thermal Control> on cpu11
est12: <Enhanced SpeedStep Frequency Control> on cpu12
p4tcc12: <CPU Frequency Thermal Control> on cpu12
est13: <Enhanced SpeedStep Frequency Control> on cpu13
p4tcc13: <CPU Frequency Thermal Control> on cpu13
est14: <Enhanced SpeedStep Frequency Control> on cpu14
p4tcc14: <CPU Frequency Thermal Control> on cpu14
est15: <Enhanced SpeedStep Frequency Control> on cpu15
p4tcc15: <CPU Frequency Thermal Control> on cpu15
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen3.2: <vendor 0x0557> at usbus3
uhub5: <vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 2> on usbus3
uhub5: 4 ports with 4 removable, self powered
ugen2.2: <vendor 0x13fe> at usbus2
umass0: <vendor 0x13fe silicon-power, class 0/0, rev 2.00/1.00, addr 2> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:8:0:-1: Attached to scbus8
ugen3.3: <ATEN> at usbus3
ukbd0: <Kb> on usbus3
kbd2 at ukbd0
ums0: <Abs Ms> on usbus3
ums0: 3 buttons and [Z] coordinates ID=0
(probe0:ciss0:0:0:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0
(probe0:ciss0:0:0:0): CAM status: SCSI Status Error
(probe0:ciss0:0:0:0): SCSI status: Check Condition
(probe0:ciss0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe30:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0
(probe30:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe30:umass-sim0:0:0:0): SCSI status: Check Condition
(probe30:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe1:ciss0:0:1:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0
(probe1:ciss0:0:1:0): CAM status: SCSI Status Error
(probe1:ciss0:0:1:0): SCSI status: Check Condition
(probe1:ciss0:0:1:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe2:ciss0:0:2:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0
(probe2:ciss0:0:2:0): CAM status: SCSI Status Error
(probe2:ciss0:0:2:0): SCSI status: Check Condition
(probe2:ciss0:0:2:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe3:ciss0:0:3:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0
(probe3:ciss0:0:3:0): CAM status: SCSI Status Error
(probe3:ciss0:0:3:0): SCSI status: Check Condition
(probe3:ciss0:0:3:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-5 device
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 2861556MB (5860467632 512 byte sectors: 255H 32S/T 65535C)
da1 at ciss0 bus 0 scbus0 target 1 lun 0
da1: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-5 device
da1: 135.168MB/s transfers
da1: Command Queueing enabled
da1: 286070MB (585871964 512 byte sectors: 255H 32S/T 65535C)
da2 at ciss0 bus 0 scbus0 target 2 lun 0
da2: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-5 device
da2: 135.168MB/s transfers
da2: Command Queueing enabled
da2: 286070MB (585871964 512 byte sectors: 255H 32S/T 65535C)
da3 at ciss0 bus 0 scbus0 target 3 lun 0
da3: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-5 device
da3: 135.168MB/s transfers
da3: Command Queueing enabled
da3: 2861556MB (5860467632 512 byte sectors: 255H 32S/T 65535C)
SMP: AP CPU #1 Launched!
da4 at umass-sim0 bus 0 scbus8 target 0 lun 0
da4: < silicon-power PMAP> Removable Direct Access SCSI-6 device
da4: 1.000MB/s transfers
SMP: AP CPU #11 Launched!
da4: 3822MB (7827456 512 byte sectors: 255H 63S/T 487C)
SMP: AP CPU #5 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #9 Launched!
Root mount waiting for: usbus3
ugen3.4: <JetFlash> at usbus3
umass1: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.00, addr 4> on usbus3
umass1:  SCSI over Bulk-Only; quirks = 0x4000
umass1:9:1:-1: Attached to scbus9
Trying to mount root from zfs:zroot []...
da5 at umass-sim1 bus 1 scbus9 target 0 lun 0
da5: <JetFlash Transcend 8GB 8.01> Removable Direct Access SCSI-2 device
da5: 1.000MB/s transfers
da5: 7648MB (15665140 512 byte sectors: 255H 63S/T 975C)
(probe0:umass-sim1:1:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
(probe0:umass-sim1:1:0:1): CAM status: SCSI Status Error
(probe0:umass-sim1:1:0:1): SCSI status: Check Condition
(probe0:umass-sim1:1:0:1): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready to ready change, medium may have changed)
cd0 at umass-sim1 bus 1 scbus9 target 0 lun 1
cd0: <Generic AutoRun Disk 8.00> Removable CD-ROM SCSI-2 device
cd0: 1.000MB/s transfers
cd0: cd present [22540 x 512 byte records]
GEOM: da5: geometry does not match label (64h,33s != 255h,63s).
GEOM: da5: media size does not match label.
Setting hostuuid: 81a00ce0-8ffe-d511-994d-18a905757ea7.
Setting hostid: 0x23c3240e.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
Starting file system checks:
Mounting local file systems:.
Setting hostname: server1.domain.ru.
Starting Network: lo0 igb0 igb1.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=3<RXCSUM,TXCSUM>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO>
        ether 18:a9:05:6e:89:b2
        inet 111.222.101.204 netmask 0xfffffe00 broadcast 111.222.101.255
        inet6 fe80::1aa9:5ff:fe6e:89b2%igb0 prefixlen 64 tentative scopeid 0x1
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
        status: no carrier
igb1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO>
        ether 18:a9:05:6e:89:b3
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
        status: no carrier
Starting devd.
Starting Network: igb1.
igb1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO>
        ether 18:a9:05:6e:89:b3
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
        status: no carrier
Starting Network: usbus0.
Starting Network: usbus1.
Starting Network: usbus2.
Starting Network: usbus3.
Starting Network: usbus4.
Starting ums0 moused.
add net default: gateway 111.222.101.1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
[фаервол вырезан]
Creating and/or trimming log files.
Starting syslogd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
32-bit compatibility ldconfig path: /usr/lib32
Clearing /tmp (X related).
Updating motd:
igb0: link state changed to UP
.
Configuring syscons: blanktime.
Starting sshd.
Starting cron.
Starting background file system checks in 60 seconds.

Thu Nov 29 16:50:26 UTC 2012
Nov 30 03:02:05 server1 sm-mta[2872]: qAU325Br002872: SYSERR(root): hash map "Alias0": missing map file /etc/mail/aliases.db: No such file or directory
Nov 30 03:02:05 server1 sm-mta[2892]: qAU325F3002892: SYSERR(root): hash map "Alias0": missing map file /etc/mail/aliases.db: No such file or directory
Nov 30 03:02:05 server1 sm-mta[2893]: qAU325Br002872: SYSERR(root): hash map "Alias0": missing map file /etc/mail/aliases.db: No such file or directory
Nov 30 03:02:05 server1 sm-mta[2895]: qAU325F3002892: SYSERR(root): hash map "Alias0": missing map file /etc/mail/aliases.db: No such file or directory
pid 24343 (try), uid 0: exited on signal 10 (core dumped)
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
coretemp8: <CPU On-Die Thermal Sensors> on cpu8
coretemp9: <CPU On-Die Thermal Sensors> on cpu9
coretemp10: <CPU On-Die Thermal Sensors> on cpu10
coretemp11: <CPU On-Die Thermal Sensors> on cpu11
coretemp12: <CPU On-Die Thermal Sensors> on cpu12
coretemp13: <CPU On-Die Thermal Sensors> on cpu13
coretemp14: <CPU On-Die Thermal Sensors> on cpu14
coretemp15: <CPU On-Die Thermal Sensors> on cpu15
Nov 30 12:37:00 server1 date: date set by root
ugen3.2: <vendor 0x0557> at usbus3 (disconnected)
uhub5: at uhub3, port 1, addr 2 (disconnected)
ugen3.3: <ATEN> at usbus3 (disconnected)
ukbd0: at uhub5, port 2, addr 3 (disconnected)
ums0: at uhub5, port 2, addr 3 (disconnected)
WARNING: /mnt/da2 was not properly dismounted
WARNING: /mnt/da1 was not properly dismounted
ugen2.2: <vendor 0x13fe> at usbus2 (disconnected)
umass0: at uhub2, port 1, addr 2 (disconnected)
(da4:umass-sim0:0:0:0): lost device - 0 outstanding
(da4:umass-sim0:0:0:0): removing device entry

Была установочная флешка, потом её достали, но в других случаях неперезагрузки флешек не было.
Во всех случаях неперезагрузки загрузочное зеркало на zfs.

[Violator]

Проверил на новом устанавливаемом сервере, shutdown -r now не помогает, только аппаратный ресет.

[Electronik]

а что в нулевой консоли после перезагрузки?