Если бы я знал что это такое....то что ваша связка тянет в систему трупик модулы2 и руби вас не смущает?
Ниразу не читал, все работает на улет ) Я же не систему обновляю, а коллекцию портов и подписан на рассылку FreeBSDскрипт не отменяет чтение /usr/ports/UPDATING
счастлив неведающий?Bacek_92 писал(а): Если бы я знал что это такое....
/usr/ports/UPDATING намекает на порты, не так лиBacek_92 писал(а): Ниразу не читал, все работает на улет ) Я же не систему обновляю, а коллекцию портов и подписан на рассылку FreeBSD
root@yakushev:: /root>#make install
===> Installing for xorg-7.5
===> xorg-7.5 depends on file: /usr/local/libdata/pkgconfig/dri.pc - found
===> xorg-7.5 depends on file: /usr/local/libdata/pkgconfig/xbitmaps.pc - found
===> xorg-7.5 depends on file: /usr/local/lib/X11/icons/handhelds/cursors/X_cursor - found
===> xorg-7.5 depends on file: /usr/local/share/X11/doc/hardcopy/BDF/bdf.PS.gz - found
===> xorg-7.5 depends on file: /usr/local/libdata/xorg/apps - not found
===> Verifying install for /usr/local/libdata/xorg/apps in /usr/ports/x11/xorg-apps
===> Installing for xorg-apps-7.5
===> xorg-apps-7.5 depends on executable: appres - found
===> xorg-apps-7.5 depends on executable: bitmap - found
===> xorg-apps-7.5 depends on executable: dga - found
===> xorg-apps-7.5 depends on executable: iceauth - found
===> xorg-apps-7.5 depends on executable: luit - found
===> xorg-apps-7.5 depends on executable: mkfontdir - found
===> xorg-apps-7.5 depends on executable: mkfontscale - found
===> xorg-apps-7.5 depends on executable: sessreg - found
===> xorg-apps-7.5 depends on executable: setxkbmap - found
===> xorg-apps-7.5 depends on executable: smproxy - found
===> xorg-apps-7.5 depends on executable: x11perf - found
===> xorg-apps-7.5 depends on executable: xauth - found
===> xorg-apps-7.5 depends on executable: xbacklight - found
===> xorg-apps-7.5 depends on executable: xcalc - found
===> xorg-apps-7.5 depends on executable: xcmsdb - found
===> xorg-apps-7.5 depends on executable: xcursorgen - found
===> xorg-apps-7.5 depends on executable: xdpyinfo - not found
===> Verifying install for xdpyinfo in /usr/ports/x11/xdpyinfo
===> xdpyinfo-1.1.0 depends on file: /usr/local/libdata/pkgconfig/dmxproto.pc - found
===> xdpyinfo-1.1.0 depends on file: /usr/local/libdata/pkgconfig/xext.pc - found
===> xdpyinfo-1.1.0 depends on file: /usr/local/libdata/pkgconfig/x11.pc - found
===> xdpyinfo-1.1.0 depends on file: /usr/local/libdata/pkgconfig/xtst.pc - not found
===> Verifying install for /usr/local/libdata/pkgconfig/xtst.pc in /usr/ports/x11/libXtst
===> libXtst-1.1.0 depends on file: /usr/local/libdata/pkgconfig/recordproto.pc - found
===> libXtst-1.1.0 depends on file: /usr/local/libdata/pkgconfig/xextproto.pc - found
===> libXtst-1.1.0 depends on file: /usr/local/libdata/pkgconfig/inputproto.pc - found
===> libXtst-1.1.0 depends on file: /usr/local/libdata/pkgconfig/x11.pc - found
===> libXtst-1.1.0 depends on file: /usr/local/libdata/pkgconfig/xext.pc - found
===> libXtst-1.1.0 depends on file: /usr/local/libdata/pkgconfig/xi.pc - not found
===> Verifying install for /usr/local/libdata/pkgconfig/xi.pc in /usr/ports/x11/libXi
===> libXi-1.3,1 depends on file: /usr/local/libdata/pkgconfig/xextproto.pc - found
===> libXi-1.3,1 depends on file: /usr/local/libdata/pkgconfig/inputproto.pc - found
===> libXi-1.3,1 depends on file: /usr/local/libdata/pkgconfig/xproto.pc - found
===> libXi-1.3,1 depends on file: /usr/local/libdata/pkgconfig/x11.pc - found
===> libXi-1.3,1 depends on file: /usr/local/libdata/pkgconfig/xext.pc - found
===> libXi-1.3,1 depends on executable: pkg-config - found
===> Configuring for libXi-1.3,1
checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... ./install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... nawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... cc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of cc... gcc3
checking build system type... i386-portbld-freebsd8.0
checking host system type... i386-portbld-freebsd8.0
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by cc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... (cached) 262144
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... no
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from cc object... ok
checking how to run the C preprocessor... cc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if cc supports -fno-rtti -fno-exceptions... no
checking for cc option to produce PIC... -fPIC -DPIC
checking if cc PIC flag -fPIC -DPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.o... (cached) yes
checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... freebsd8.0 ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for cc option to accept ISO C99... -std=gnu99
checking for pkg-config... /usr/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for XI... configure: error: Package requirements (xproto >= 7.0.13 x11 >= 1.2.99.1 xextproto >= 7.0.3 xext >= 1.0.99.1 inputproto >= 1.9.99.902) were not met:
Requested 'inputproto >= 1.9.99.902' but version of InputProto is 1.5.0
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables XI_CFLAGS
and XI_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
===> Script "configure" failed unexpectedly.
Please report the problem to x11@FreeBSD.org [maintainer] and attach the
"/usr/ports/x11/libXi/work/libXi-1.3/config.log" including the output of the
failure of your make command. Also, it might be a good idea to provide an
overview of all packages installed on your system (e.g. an `ls /var/db/pkg`).
*** Error code 1
Stop in /usr/ports/x11/libXi.
*** Error code 1
Stop in /usr/ports/x11/libXtst.
*** Error code 1
Stop in /usr/ports/x11/xdpyinfo.
*** Error code 1
Stop in /usr/ports/x11/xorg-apps.
*** Error code 1
Stop in /usr/ports/x11/xorg-apps.
*** Error code 1
Stop in /usr/ports/x11/xorg.
Сейчас ему что надо я запустил portmaster такЯ в конец запуталсяroot@yakushev:: /root>#pwd
/usr/ports/ports-mgmt/portupgrade
root@yakushev:: /root>#make
root@yakushev:: /root>#make install
===> Installing for portupgrade-2.4.6_4,2
===> portupgrade-2.4.6_4,2 depends on file: /usr/local/bin/ruby18 - found
===> portupgrade-2.4.6_4,2 depends on file: /usr/local/lib/ruby/site_ruby/1.8/i386-freebsd8/bdb.so - not found
===> Verifying install for /usr/local/lib/ruby/site_ruby/1.8/i386-freebsd8/bdb.so in /usr/ports/databases/ruby-bdb
===> ruby18-bdb-0.6.5_1 depends on file: /usr/local/bin/ruby18 - found
===> ruby18-bdb-0.6.5_1 depends on shared library: db41.1 - not found
===> Verifying install for db41.1 in /usr/ports/databases/db41
===> Vulnerability check disabled, database not found
===> License check disabled, port has not defined LICENSE
=> patch.4.1.25.1 doesn't seem to exist in /usr/ports/distfiles/bdb.
=> Attempting to fetch from http://www.oracle.com/technology/produc ... te/4.1.25/.
--2010-08-26 08:50:29-- http://www.oracle.com/technology/produc ... h.4.1.25.1
Resolving www.oracle.com... 92.122.212.72, 92.122.212.83
Connecting to www.oracle.com|92.122.212.72|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://www.oracle.com/technetwork/datab ... index.html [following]
--2010-08-26 08:50:31-- http://www.oracle.com/technetwork/datab ... index.html
Reusing existing connection to www.oracle.com:80.
HTTP request sent, awaiting response... 200 OK
The file is already fully retrieved; nothing to do.
=> patch.4.1.25.2 doesn't seem to exist in /usr/ports/distfiles/bdb.
=> Attempting to fetch from http://www.oracle.com/technology/produc ... te/4.1.25/.
--2010-08-26 08:50:31-- http://www.oracle.com/technology/produc ... h.4.1.25.2
Resolving www.oracle.com... 92.122.212.83, 92.122.212.72
Connecting to www.oracle.com|92.122.212.83|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://www.oracle.com/technetwork/datab ... index.html [following]
--2010-08-26 08:50:31-- http://www.oracle.com/technetwork/datab ... index.html
Reusing existing connection to www.oracle.com:80.
HTTP request sent, awaiting response... 200 OK
The file is already fully retrieved; nothing to do.
=> patch.4.1.25.3 doesn't seem to exist in /usr/ports/distfiles/bdb.
=> Attempting to fetch from http://www.oracle.com/technology/produc ... te/4.1.25/.
--2010-08-26 08:50:31-- http://www.oracle.com/technology/produc ... h.4.1.25.3
Resolving www.oracle.com... 92.122.212.72, 92.122.212.83
Connecting to www.oracle.com|92.122.212.72|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://www.oracle.com/technetwork/datab ... index.html [following]
--2010-08-26 08:50:32-- http://www.oracle.com/technetwork/datab ... index.html
Reusing existing connection to www.oracle.com:80.
HTTP request sent, awaiting response... 200 OK
The file is already fully retrieved; nothing to do.
===> Extracting for db41-4.1.25_4
=> MD5 Checksum OK for bdb/db-4.1.25.tar.gz.
=> SHA256 Checksum OK for bdb/db-4.1.25.tar.gz.
cannot open bdb/patch.4.1.25.1: No such file or directory
*** Error code 2
Stop in /usr/ports/databases/db41.
*** Error code 1
Stop in /usr/ports/databases/ruby-bdb.
*** Error code 1
Stop in /usr/ports/ports-mgmt/portupgrade.
*** Error code 1
Stop in /usr/ports/ports-mgmt/portupgrade.
Код: Выделить всё
oot@yakushev:: /root>#portmaster /usr/ports/x11/xorg
===>>> Port directory: /usr/ports/x11/xorg
===>>> Gathering distinfo list for installed ports
===>>> Gathering dependency list for x11/xorg from ports
===>>> Launching child to update x11-drivers/xorg-drivers
x11/xorg >> x11-drivers/xorg-drivers
===>>> Port directory: /usr/ports/x11-drivers/xorg-drivers
===>>> This port is marked IGNORE
===>>> can't be installed because of conflicting drivers (via:openchrome). Re-run make config.
===>>> If you are sure you can build it, remove the
IGNORE line in the Makefile and try again.
===>>> Update for x11-drivers/xorg-drivers failed
===>>> Aborting update
Terminated
TerminatedКод: Выделить всё
compositeproto-0.4 < needs updating (index has 0.4.1)
damageproto-1.1.0_2 < needs updating (index has 1.2.0)
dmxproto-2.2.2 < needs updating (index has 2.3)
encodings-1.0.2,1 < needs updating (index has 1.0.3,1)
expat-2.0.1 < needs updating (index has 2.0.1_1)
fixesproto-4.0 < needs updating (index has 4.1.1)
font-util-1.0.1 < needs updating (index has 1.0.2)
fontcacheproto-0.1.2 < needs updating (index has 0.1.3)
fontsproto-2.0.2 < needs updating (index has 2.1.0)
gio-fam-backend-2.24.1_1 < needs updating (index has 2.24.2)
glib-2.24.1_1 < needs updating (index has 2.24.2)
inputproto-1.5.0 < needs updating (index has 2.0)
kbproto-1.0.3 < needs updating (index has 1.0.4)
mc-4.7.2_1 < needs updating (index has 4.7.2_2)
pciids-20090807 < needs updating (index has 20091229)
pcre-8.02 < needs updating (index has 8.10)
python26-2.6.2_3 < needs updating (index has 2.6.5_1)
randrproto-1.3.0 < needs updating (index has 1.3.1)
recordproto-1.13.2 < needs updating (index has 1.14)
renderproto-0.9.3 < needs updating (index has 0.11)
ru-freebsd-doc-20090913 < needs updating (index has 20100811)
scrnsaverproto-1.1.0 < needs updating (index has 1.2.0)
videoproto-2.2.2 < needs updating (index has 2.3.0)
xbitmaps-1.0.1 < needs updating (index has 1.1.0)
xcursor-themes-1.0.1_1 < needs updating (index has 1.0.2)
xf86miscproto-0.9.2 < needs updating (index has 0.9.3)
xineramaproto-1.1.2 < needs updating (index has 1.2)
Код: Выделить всё
root@yakushev:: /root>#clear
root@yakushev:: /root>#pwd
/usr/ports/ports-mgmt/portupgrade
root@yakushev:: /root>#make install
===> Installing for portupgrade-2.4.6_4,2
===> portupgrade-2.4.6_4,2 depends on file: /usr/local/bin/ruby18 - found
===> portupgrade-2.4.6_4,2 depends on file: /usr/local/lib/ruby/site_ruby/1.8/i386-freebsd8/bdb.so - not found
===> Verifying install for /usr/local/lib/ruby/site_ruby/1.8/i386-freebsd8/bdb.so in /usr/ports/databases/ruby-bdb
===> ruby18-bdb-0.6.5_1 depends on file: /usr/local/bin/ruby18 - found
===> ruby18-bdb-0.6.5_1 depends on shared library: db41.1 - not found
===> Verifying install for db41.1 in /usr/ports/databases/db41
===> Vulnerability check disabled, database not found
===> License check disabled, port has not defined LICENSE
=> patch.4.1.25.1 doesn't seem to exist in /usr/ports/distfiles/bdb.
=> Attempting to fetch from http://www.oracle.com/technology/products/berkeley-db/db/update/4.1.25/.
--2010-08-26 09:08:32-- http://www.oracle.com/technology/products/berkeley-db/db/update/4.1.25/patch.4.1.25.1
Resolving www.oracle.com... 195.10.39.106, 195.10.39.114
Connecting to www.oracle.com|195.10.39.106|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://www.oracle.com/technetwork/database/berkeleydb/overview/index.html [following]
--2010-08-26 09:08:32-- http://www.oracle.com/technetwork/database/berkeleydb/overview/index.html
Reusing existing connection to www.oracle.com:80.
HTTP request sent, awaiting response... 200 OK
The file is already fully retrieved; nothing to do.
=> patch.4.1.25.2 doesn't seem to exist in /usr/ports/distfiles/bdb.
=> Attempting to fetch from http://www.oracle.com/technology/products/berkeley-db/db/update/4.1.25/.
--2010-08-26 09:08:32-- http://www.oracle.com/technology/products/berkeley-db/db/update/4.1.25/patch.4.1.25.2
Resolving www.oracle.com... 195.10.39.114, 195.10.39.106
Connecting to www.oracle.com|195.10.39.114|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://www.oracle.com/technetwork/database/berkeleydb/overview/index.html [following]
--2010-08-26 09:08:32-- http://www.oracle.com/technetwork/database/berkeleydb/overview/index.html
Reusing existing connection to www.oracle.com:80.
HTTP request sent, awaiting response... 200 OK
The file is already fully retrieved; nothing to do.
=> patch.4.1.25.3 doesn't seem to exist in /usr/ports/distfiles/bdb.
=> Attempting to fetch from http://www.oracle.com/technology/products/berkeley-db/db/update/4.1.25/.
--2010-08-26 09:08:33-- http://www.oracle.com/technology/products/berkeley-db/db/update/4.1.25/patch.4.1.25.3
Resolving www.oracle.com... 195.10.39.106, 195.10.39.114
Connecting to www.oracle.com|195.10.39.106|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://www.oracle.com/technetwork/database/berkeleydb/overview/index.html [following]
--2010-08-26 09:08:33-- http://www.oracle.com/technetwork/database/berkeleydb/overview/index.html
Reusing existing connection to www.oracle.com:80.
HTTP request sent, awaiting response... 200 OK
The file is already fully retrieved; nothing to do.
===> Extracting for db41-4.1.25_4
=> MD5 Checksum OK for bdb/db-4.1.25.tar.gz.
=> SHA256 Checksum OK for bdb/db-4.1.25.tar.gz.
cannot open bdb/patch.4.1.25.1: No such file or directory
*** Error code 2
Stop in /usr/ports/databases/db41.
*** Error code 1
Stop in /usr/ports/databases/ruby-bdb.
*** Error code 1
Stop in /usr/ports/ports-mgmt/portupgrade.
*** Error code 1
Stop in /usr/ports/ports-mgmt/portupgrade.
root@yakushev:: /root>#Код: Выделить всё
root@yakushev:: /root>#clear
root@yakushev:: /root>#pwd
/usr/ports/x11/xorg
root@yakushev:: /root>#make install
===> Installing for xorg-7.5
===> xorg-7.5 depends on file: /usr/local/libdata/pkgconfig/dri.pc - found
===> xorg-7.5 depends on file: /usr/local/libdata/pkgconfig/xbitmaps.pc - found
===> xorg-7.5 depends on file: /usr/local/lib/X11/icons/handhelds/cursors/X_cursor - found
===> xorg-7.5 depends on file: /usr/local/share/X11/doc/hardcopy/BDF/bdf.PS.gz - found
===> xorg-7.5 depends on file: /usr/local/libdata/xorg/apps - not found
===> Verifying install for /usr/local/libdata/xorg/apps in /usr/ports/x11/xorg-apps
===> Installing for xorg-apps-7.5
===> xorg-apps-7.5 depends on executable: appres - found
===> xorg-apps-7.5 depends on executable: bitmap - found
===> xorg-apps-7.5 depends on executable: dga - found
===> xorg-apps-7.5 depends on executable: iceauth - found
===> xorg-apps-7.5 depends on executable: luit - found
===> xorg-apps-7.5 depends on executable: mkfontdir - found
===> xorg-apps-7.5 depends on executable: mkfontscale - found
===> xorg-apps-7.5 depends on executable: sessreg - found
===> xorg-apps-7.5 depends on executable: setxkbmap - found
===> xorg-apps-7.5 depends on executable: smproxy - found
===> xorg-apps-7.5 depends on executable: x11perf - found
===> xorg-apps-7.5 depends on executable: xauth - found
===> xorg-apps-7.5 depends on executable: xbacklight - found
===> xorg-apps-7.5 depends on executable: xcalc - found
===> xorg-apps-7.5 depends on executable: xcmsdb - found
===> xorg-apps-7.5 depends on executable: xcursorgen - found
===> xorg-apps-7.5 depends on executable: xdpyinfo - not found
===> Verifying install for xdpyinfo in /usr/ports/x11/xdpyinfo
===> xdpyinfo-1.1.0 depends on file: /usr/local/libdata/pkgconfig/dmxproto.pc - found
===> xdpyinfo-1.1.0 depends on file: /usr/local/libdata/pkgconfig/xext.pc - found
===> xdpyinfo-1.1.0 depends on file: /usr/local/libdata/pkgconfig/x11.pc - found
===> xdpyinfo-1.1.0 depends on file: /usr/local/libdata/pkgconfig/xtst.pc - not found
===> Verifying install for /usr/local/libdata/pkgconfig/xtst.pc in /usr/ports/x11/libXtst
===> libXtst-1.1.0 depends on file: /usr/local/libdata/pkgconfig/recordproto.pc - found
===> libXtst-1.1.0 depends on file: /usr/local/libdata/pkgconfig/xextproto.pc - found
===> libXtst-1.1.0 depends on file: /usr/local/libdata/pkgconfig/inputproto.pc - found
===> libXtst-1.1.0 depends on file: /usr/local/libdata/pkgconfig/x11.pc - found
===> libXtst-1.1.0 depends on file: /usr/local/libdata/pkgconfig/xext.pc - found
===> libXtst-1.1.0 depends on file: /usr/local/libdata/pkgconfig/xi.pc - found
===> libXtst-1.1.0 depends on package: libtool>=2.2 - found
===> libXtst-1.1.0 depends on executable: pkg-config - found
===> Configuring for libXtst-1.1.0
configure: WARNING: unrecognized options: --enable-malloc0returnsnull
checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... ./install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... nawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... cc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of cc... gcc3
checking build system type... i386-portbld-freebsd8.0
checking host system type... i386-portbld-freebsd8.0
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by cc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... (cached) 262144
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... no
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from cc object... ok
checking how to run the C preprocessor... cc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if cc supports -fno-rtti -fno-exceptions... no
checking for cc option to produce PIC... -fPIC -DPIC
checking if cc PIC flag -fPIC -DPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.o... (cached) yes
checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... freebsd8.0 ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for cc option to accept ISO C99... -std=gnu99
checking for xmlto... no
checking for pkg-config... /usr/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for XTST... configure: error: Package requirements (x11 xext >= 1.0.99.4 xi recordproto >= 1.13.99.1 xextproto >= 7.0.99.3 inputproto) were not met:
Requested 'recordproto >= 1.13.99.1' but version of RecordProto is 1.13.2
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables XTST_CFLAGS
and XTST_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
===> Script "configure" failed unexpectedly.
Please report the problem to x11@FreeBSD.org [maintainer] and attach the
"/usr/ports/x11/libXtst/work/libXtst-1.1.0/config.log" including the output
of the failure of your make command. Also, it might be a good idea to provide
an overview of all packages installed on your system (e.g. an `ls
/var/db/pkg`).
*** Error code 1
Stop in /usr/ports/x11/libXtst.
*** Error code 1
Stop in /usr/ports/x11/xdpyinfo.
*** Error code 1
Stop in /usr/ports/x11/xorg-apps.
*** Error code 1
Stop in /usr/ports/x11/xorg-apps.
*** Error code 1
Stop in /usr/ports/x11/xorg.
Код: Выделить всё
pkg_delete *
The file is already fully retrieved; nothing to do.ajak писал(а):Народ можно пошагово а то я в конец запутался
Код: Выделить всё
root@yakushev:: /root>#clear root@yakushev:: /root>#pwd /usr/ports/ports-mgmt/portupgrade root@yakushev:: /root>#make install ===> Installing for portupgrade-2.4.6_4,2 ===> portupgrade-2.4.6_4,2 depends on file: /usr/local/bin/ruby18 - found ===> portupgrade-2.4.6_4,2 depends on file: /usr/local/lib/ruby/site_ruby/1.8/i386-freebsd8/bdb.so - not found ===> Verifying install for /usr/local/lib/ruby/site_ruby/1.8/i386-freebsd8/bdb.so in /usr/ports/databases/ruby-bdb ===> ruby18-bdb-0.6.5_1 depends on file: /usr/local/bin/ruby18 - found ===> ruby18-bdb-0.6.5_1 depends on shared library: db41.1 - not found ===> Verifying install for db41.1 in /usr/ports/databases/db41 ===> Vulnerability check disabled, database not found ===> License check disabled, port has not defined LICENSE => patch.4.1.25.1 doesn't seem to exist in /usr/ports/distfiles/bdb. => Attempting to fetch from http://www.oracle.com/technology/products/berkeley-db/db/update/4.1.25/. --2010-08-26 09:08:32-- http://www.oracle.com/technology/products/berkeley-db/db/update/4.1.25/patch.4.1.25.1 Resolving www.oracle.com... 195.10.39.106, 195.10.39.114 Connecting to www.oracle.com|195.10.39.106|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: http://www.oracle.com/technetwork/database/berkeleydb/overview/index.html [following] --2010-08-26 09:08:32-- http://www.oracle.com/technetwork/database/berkeleydb/overview/index.html Reusing existing connection to www.oracle.com:80. HTTP request sent, awaiting response... 200 OK The file is already fully retrieved; nothing to do. => patch.4.1.25.2 doesn't seem to exist in /usr/ports/distfiles/bdb. => Attempting to fetch from http://www.oracle.com/technology/products/berkeley-db/db/update/4.1.25/. --2010-08-26 09:08:32-- http://www.oracle.com/technology/products/berkeley-db/db/update/4.1.25/patch.4.1.25.2 Resolving www.oracle.com... 195.10.39.114, 195.10.39.106 Connecting to www.oracle.com|195.10.39.114|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: http://www.oracle.com/technetwork/database/berkeleydb/overview/index.html [following] --2010-08-26 09:08:32-- http://www.oracle.com/technetwork/database/berkeleydb/overview/index.html Reusing existing connection to www.oracle.com:80. HTTP request sent, awaiting response... 200 OK The file is already fully retrieved; nothing to do. => patch.4.1.25.3 doesn't seem to exist in /usr/ports/distfiles/bdb. => Attempting to fetch from http://www.oracle.com/technology/products/berkeley-db/db/update/4.1.25/. --2010-08-26 09:08:33-- http://www.oracle.com/technology/products/berkeley-db/db/update/4.1.25/patch.4.1.25.3 Resolving www.oracle.com... 195.10.39.106, 195.10.39.114 Connecting to www.oracle.com|195.10.39.106|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: http://www.oracle.com/technetwork/database/berkeleydb/overview/index.html [following] --2010-08-26 09:08:33-- http://www.oracle.com/technetwork/database/berkeleydb/overview/index.html Reusing existing connection to www.oracle.com:80. HTTP request sent, awaiting response... 200 OK The file is already fully retrieved; nothing to do. ===> Extracting for db41-4.1.25_4 => MD5 Checksum OK for bdb/db-4.1.25.tar.gz. => SHA256 Checksum OK for bdb/db-4.1.25.tar.gz. cannot open bdb/patch.4.1.25.1: No such file or directory *** Error code 2 Stop in /usr/ports/databases/db41. *** Error code 1 Stop in /usr/ports/databases/ruby-bdb. *** Error code 1 Stop in /usr/ports/ports-mgmt/portupgrade. *** Error code 1 Stop in /usr/ports/ports-mgmt/portupgrade. root@yakushev:: /root>#
пусть для начала правильно cvsup обновит портыcannot open bdb/patch.4.1.25.1: No such file or directory
Bacek_92 писал(а):Я недавно поставил с портов на FreeBSD 7.2 xorg
..............
Или воспользоваться готовыми скриптами для обновлений , которые есть на сайте у Лиссяры
http://www.lissyara.su/articles/freebsd ... t_upgrade/
Вот например я пользуюсь таким:Этот скрипт обновит все проги на твоем сервере.Код: Выделить всё
#!/usr/bin/perl $nn = 0; while (1) { $nn++; open( OPERN, "portversion |" ); my @all2 = <OPERN>; close OPERN; my @all; for ( $i = 0 ; $i < @all2 ; $i++ ) { my ( $pp, $st ) = split( / /, $all2[$i], 2 ); if ( $st =~ '<' ) { push @all, $pp; # $all[$i] = $pp; } } exit if ( !$all[0] || $nn > 2 ); while (1) { last if !$all[0]; print "$all[0]\n"; logsave( get_time(), $all[0] ); system("portupgrade -rf $all[0]"); # system("portupgrade -Rf $all[0]"); # первый порт попробовать обновить вдоль и поперек # (выше system нужно закомментировать) # if ($nn == 1) { # system("portupgrade -rRf $all[0]"); # } else { # system("portupgrade -rf $all[0]"); # } # экспериментально: # можно добавить чтобы скрипт автоматически нажимал на энтер # use IO::Select; # my $select = IO::Select->new; # for(@array) # open my $pipe, "|$_"; # $select->add($pipe); # } # my @waiters = $select->can_write($timeout); # print $_ "\x0a" for @waiters; logsave( get_time(), $all[0] ); shift @all; my @all = old(@all); } } sub old { my @all = @_; open( OPEN2, "portversion |" ); my @all_all = <OPEN2>; close OPEN2; my @old; my @no_old; foreach my $p (@all_all) { my ( $pname, $status ) = split( / /, $p, 2 ); if ( $status =~ '<' ) { push @old, $pname; } else { push @no_old, $pname; } } my %seen; @seen{@all} = (); delete @seen{@no_old}; return keys %seen; } sub get_time { my ( $sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst ) = localtime(time); $mon++; $year += 1900; if ( $mday < 10 ) { $mday = "0$mday"; } if ( $mon < 10 ) { $mon = "0$mon"; } if ( $min < 10 ) { $min = "0$min"; } my $date = "$mday $mon $year"; my $time = "$hour:$min:$sec"; my $cur_all_day = $mday + $mon * 30 + $year * 365; my $radate = "$year-$mon-$mday $hour:$min:$sec"; return $radate; } sub logsave { my ( $time, $ports ) = @_; my $logfile; $logfile = "\n time: $time \n ports: $ports \n\n"; system("touch /var/log/portupgrade.log"); open( DB2, "/var/log/portupgrade.log" ) || die "Cannot open file: $!"; my @base = <DB2>; close(DB2); open( DB, ">/var/log/portupgrade.log" ) || die "Cannot open file : $!"; print DB @base; print DB $logfile; close(DB); }
Код: Выделить всё
exit if ( !$all[0] || $nn > [b]3[/b] );Код: Выделить всё
# system("portupgrade -rf $all[0]");
# system("portupgrade -Rf $all[0]");
# первый порт попробовать обновить вдоль и поперек
### (выше system нужно закомментировать)
if ($nn == 1) {
system("portupgrade -rRf $all[0]");
} else {
system("portupgrade -rf $all[0]");
}если ставится java, то установка gcc-java почему замерает и не продолжается, может стоит как пославть ctrl+c сигнал, можно как-то тут:-y
--yes Answer yes to all the questions. This option
implies -v and negates -n.
Код: Выделить всё
# экспериментально:
# можно добавить чтобы скрипт автоматически нажимал на энтер
# use IO::Select;
# my $select = IO::Select->new;
# for(@array)
# open my $pipe, "|$_";
# $select->add($pipe);
# }
# my @waiters = $select->can_write($timeout);
# print $_ "\x0a" for @waiters; /etc/make.conf--batch Run an upgrading process in a batch mode (with
BATCH=yes).
Код: Выделить всё
BATCH=yes
Код: Выделить всё
cat /usr/local/sbin/portupgrade | lessКод: Выделить всё
REASON_COMMENT = {
:badcpp => "bad C++ code",
:bison => "bison error",
:categories => "invalid category",
:cc => "compiler error",
:checksum => "checksum mismatch",
:chown => "chown error",
:configure => "configure error",
:coredump => "coredump",
:dependobj => "depend object",
# :dependpkg => "depend package",
# :diskfull => "disk full",
:display => "X DISPLAY error",
:distinfo => "distinfo incorrect",
:elf => "ELF",
# :extra => 'extra files',
# :fetch_timeout => "fetch timeout",
:fetch => "fetch error",
:gcc_bug => "gcc bug",
:header => "missing header",
:install => "install error",
:interrupt => "interrupted by user",
:ld => "linker error",
:libdepends => "dependent libraries",
:malloc_h => "reference to malloc.h",
:manpage => "manpage error",
:motif => "Motif error",
:motiflib => "Motif libraries error",
:newgcc => "new compiler error",
# :nfs => "NFS error",
:patch => "patch error",
:perm => "permission denied",
:perl => "perl missing",
:perl5 => "Perl5 error (h2ph)",
:plist => "package error",
# :runaway => "runaway process",
:segfault => "segmentation fault",
:soundcard_h => "reference to soundcard.h",
:stdio => "stdio compatibility",
:struct => "struct changes",
:texinfo => "texinfo error",
:union => "union wait error",
:unknown => "unknown build error",
:usexlib => "X libraries missing",
# :wrkdir => "WRKDIR error",
:values_h => "reference to values.h",
:xfree4man => "X manpage error",
}
Код: Выделить всё
#!/usr/local/bin/ruby18
# -*- ruby -*-
#
# Copyright (c) 2000-2004 Akinori MUSHA
# Copyright (c) 2005,2006 KOMATSU Shinichiro
# Copyright (c) 2006-2008 Sergey Matveychuk <sem@FreeBSD.org>
#
# All rights reserved.
Код: Выделить всё
/usr/local/man/man1/pkg_deinstall.1.gz
/usr/local/man/man1/pkg_fetch.1.gz
/usr/local/man/man1/pkg_glob.1.gz
/usr/local/man/man1/pkg_sort.1.gz
/usr/local/man/man1/pkgdb.1.gz
/usr/local/man/man1/pkgdu.1.gz
/usr/local/man/man1/portcvsweb.1.gz
/usr/local/man/man1/portsclean.1.gz
/usr/local/man/man1/portsdb.1.gz
/usr/local/man/man1/portupgrade.1.gz
/usr/local/man/man1/portversion.1.gz
/usr/local/man/man5/pkgtools.conf.5.gz
/usr/local/man/man1/pkg_which.1.gz
/usr/local/man/man1/portinstall.1.gz
/usr/local/man/man1/ports_glob.1.gz
/usr/local/sbin/pkg_deinstall
/usr/local/sbin/pkg_fetch
/usr/local/sbin/pkg_glob
/usr/local/sbin/pkg_sort
/usr/local/sbin/pkg_which
/usr/local/sbin/pkgdb
/usr/local/sbin/pkgdu
/usr/local/sbin/portcvsweb
/usr/local/sbin/portinstall
/usr/local/sbin/ports_glob
/usr/local/sbin/portsclean
/usr/local/sbin/portsdb
/usr/local/sbin/portupgrade
/usr/local/sbin/portversion
/usr/local/lib/ruby/site_ruby/1.8/pkg.rb
/usr/local/lib/ruby/site_ruby/1.8/pkgdb.rb
/usr/local/lib/ruby/site_ruby/1.8/pkgdbtools.rb
/usr/local/lib/ruby/site_ruby/1.8/pkginfo.rb
/usr/local/lib/ruby/site_ruby/1.8/pkgmisc.rb
/usr/local/lib/ruby/site_ruby/1.8/pkgtools.rb
/usr/local/lib/ruby/site_ruby/1.8/pkgtsort.rb
/usr/local/lib/ruby/site_ruby/1.8/pkgversion.rb
/usr/local/lib/ruby/site_ruby/1.8/portinfo.rb
/usr/local/lib/ruby/site_ruby/1.8/ports.rb
/usr/local/lib/ruby/site_ruby/1.8/portsdb.rb
/usr/local/etc/pkgtools.conf.sample
/usr/local/etc/pkgtools.status-pkg.sh
/usr/local/share/zsh/site-functions/_pkgtools
/usr/local/share/examples/pkgtools/bash/complete.sample
/usr/local/share/examples/pkgtools/tcsh/complete.sample
/usr/local/share/doc/pkgtools/ChangeLog
/usr/local/share/doc/pkgtools/NEWS
/usr/local/share/doc/pkgtools/README
/usr/local/libdata/ldconfig/portupgrade
далее#portsnap fetch
Looking up portsnap.FreeBSD.org mirrors... 5 mirrors found.
Fetching snapshot tag from portsnap1.FreeBSD.org... done.
Fetching snapshot metadata... done.
Updating from Tue Aug 24 16:09:05 MSD 2010 to Thu Aug 26 10:25:36 MSD 2010.
Fetching 4 metadata patches... done.
Applying metadata patches... done.
Fetching 0 metadata files... done.
Fetching 84 patches.....10....20....30....40....50....60....70....80.. done.
Applying patches... done.
Fetching 4 new ports or files... done.
root@yakushev:: /root>#portsnap
Код: Выделить всё
/usr/ports/x11/yelp/
/usr/ports/x11/zenity/
Building new INDEX files... done.Код: Выделить всё
root@yakushev:: /root>#portsnap update
Ports tree is already up to date.Код: Выделить всё
#pwd
/usr/ports/x11/xorg
root@yakushev:: /root>#make
This is a meta-port, meaning that it just depends on its subparts of the port.
It won't build and install all the parts until you have typed make install
This port does not ensure things are upgraded; use portupgrade if you want to
upgrade X.Org. If you simply type 'make install' it may use over 2GB to build
all of the subports. You can install the ports singly if you are low on space.
===> Vulnerability check disabled, database not found
===> License check disabled, port has not defined LICENSE
===> Extracting for xorg-7.5
===> Patching for xorg-7.5
===> Configuring for xorg-7.5
root@yakushev:: /root>#make install
===> Installing for xorg-7.5
===> xorg-7.5 depends on file: /usr/local/libdata/pkgconfig/dri.pc - not found
===> Verifying install for /usr/local/libdata/pkgconfig/dri.pc in /usr/ports/graphics/dri
===> Vulnerability check disabled, database not found
===> License check disabled, port has not defined LICENSE
=> MesaLib-7.4.4.tar.bz2 doesn't seem to exist in /usr/ports/distfiles/.
=> Attempting to fetch from ftp://ftp.freedesktop.org/pub/mesa/7.4.4/.
env: /usr/local/bin/wget: No such file or directory
=> Attempting to fetch from ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/.
env: /usr/local/bin/wget: No such file or directory
=> Couldn't fetch it - please try to retrieve this
=> port manually into /usr/ports/distfiles/ and try again.
*** Error code 1
Stop in /usr/ports/graphics/dri.
*** Error code 1
Stop in /usr/ports/x11/xorg.
заведи девушку, штолеvadim64 писал(а):Хизель, щас вот ваш пост очень хорошо гармонирует с аватаром
hizel писал(а):не отменяет чтение UPDATING, руки из жопы сложно выправляемы
там может будет из 200 портов около 5-10 не обновленных...Bacek_92 писал(а):Ниразу не читал, все работает на улет )
...