создание тонкого клиента FreeBSD 8.1

Простые/общие вопросы по UNIX системам. Спросите здесь, если вы новичок

Модераторы: vadim64, terminus

Правила форума
Убедительная просьба юзать теги [cоde] при оформлении листингов.
Сообщения не оформленные должным образом имеют все шансы быть незамеченными.
Anubis_Donetsk
рядовой
Сообщения: 34
Зарегистрирован: 2010-10-01 16:13:19

создание тонкого клиента FreeBSD 8.1

Непрочитанное сообщение Anubis_Donetsk » 2010-10-13 13:54:47

делю клиента для diskless
за основу использую http://www.lissyara.su/articles/freebsd ... /diskless/
делаю все на VirtualBox

значиццо так, ставлю фрю, ставлю сорсы с диска установки, потом:

Код: Выделить всё

# mkdir /usr/tftpboot
# cd /usr/src && make buildworld && make installworld DESTDIR=/usr/tftpboot
# cp /usr/src/sys/i386/conf/GENERIC /usr/src/sys/i386/conf/DISKLESS
# cat DISKLESS
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.519.2.11 2010/08/11 07:11:20 bschmidt Exp $

#cpu		I486_CPU
#cpu		I586_CPU
cpu		I686_CPU
ident		DISKLESS_anubis

# To statically compile in device wiring instead of /boot/device.hints
#hints		"GENERIC.hints"		# Default places to look for devices.

# Use the following to compile in values accessible to the kernel
# through getenv() (or kenv(1) in userland). The format of the file
# is 'variable=value', see kenv(1)
#
# env		"GENERIC.env"

#makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbol

options		BOOTP
options		BOOTP_NFSROOT
options		BOOTP_COMPAT

options 	SCHED_ULE		# ULE scheduler
options 	PREEMPTION		# Enable kernel thread preemption
options 	INET			# InterNETworking
#options 	INET6			# IPv6 communications protocols
options 	SCTP			# Stream Control Transmission Protocol
options 	FFS			# Berkeley Fast Filesystem
options 	SOFTUPDATES		# Enable FFS soft updates support
options 	UFS_ACL			# Support for access control lists
options 	UFS_DIRHASH		# Improve performance on big directories
options 	UFS_GJOURNAL		# Enable gjournal-based UFS journaling
options 	MD_ROOT			# MD is a potential root device
options 	NFSCLIENT		# Network Filesystem Client
options 	NFSSERVER		# Network Filesystem Server
options 	NFSLOCKD		# Network Lock Manager
options 	NFS_ROOT		# NFS usable as /, requires NFSCLIENT
options 	MSDOSFS			# MSDOS Filesystem
options 	CD9660			# ISO 9660 Filesystem
options 	PROCFS			# Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		# Pseudo-filesystem framework
options 	GEOM_PART_GPT		# GUID Partition Tables.
options 	GEOM_LABEL		# Provides labelization
options 	COMPAT_43TTY		# BSD 4.3 TTY compat (sgtty)
options 	COMPAT_FREEBSD4		# Compatible with FreeBSD4
options 	COMPAT_FREEBSD5		# Compatible with FreeBSD5
options 	COMPAT_FREEBSD6		# Compatible with FreeBSD6
options 	COMPAT_FREEBSD7		# Compatible with FreeBSD7
options 	SCSI_DELAY=5000		# Delay (in ms) before probing SCSI
options 	KTRACE			# ktrace(1) support
options 	STACK			# stack(9) support
options 	SYSVSHM			# SYSV-style shared memory
options 	SYSVMSG			# SYSV-style message queues
options 	SYSVSEM			# SYSV-style semaphores
options 	P1003_1B_SEMAPHORES	# POSIX-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options 	PRINTF_BUFR_SIZE=128	# Prevent printf output being interspersed.
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	HWPMC_HOOKS		# Necessary kernel hooks for hwpmc(4)
options 	AUDIT			# Security event auditing
options 	MAC			# TrustedBSD MAC Framework
options 	FLOWTABLE		# per-cpu routing cache
#options 	KDTRACE_HOOKS		# Kernel DTrace hooks
options 	INCLUDE_CONFIG_FILE     # Include this file in kernel

# To make an SMP kernel, the next two lines are needed
options 	SMP			# Symmetric MultiProcessor Kernel
device		apic			# I/O APIC

# CPU frequency control
device		cpufreq

# Bus support.
device		acpi
#device		eisa
device		pci

# Floppy drives
device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk		# ATA disk drives
#device		ataraid		# ATA RAID drives
device		atapicd		# ATAPI CDROM drives
#device		atapifd		# ATAPI floppy drives
#device		atapist		# ATAPI tape drives
options 	ATA_STATIC_ID	# Static device numbering

# SCSI Controllers
#device		ahb		# EISA AHA1742 family
#device		ahc		# AHA2940 and onboard AIC7xxx devices
#options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
#device		ahd		# AHA39320/29320 and onboard AIC79xx devices
#options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~215k to driver.
#device		amd		# AMD 53C974 (Tekram DC-390(T))
#device		hptiop		# Highpoint RocketRaid 3xxx series
#device		isp		# Qlogic family
#device		ispfw		# Firmware for QLogic HBAs- normally a module
#device		mpt		# LSI-Logic MPT-Fusion
#device		ncr		# NCR/Symbios Logic
#device		sym		# NCR/Symbios Logic (newer chipsets + those of `ncr')
#device		trm		# Tekram DC395U/UW/F DC315U adapters

#device		adv		# Advansys SCSI adapters
#device		adw		# Advansys wide SCSI adapters
#device		aha		# Adaptec 154x SCSI adapters
#device		aic		# Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device		bt		# Buslogic/Mylex MultiMaster SCSI adapters

#device		ncv		# NCR 53C500
#device		nsp		# Workbit Ninja SCSI-3
#device		stg		# TMC 18C30/18C50

# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
device		ch		# SCSI media changers
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)
device		ses		# SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
#device		amr		# AMI MegaRAID
#device		arcmsr		# Areca SATA II RAID
#device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
#device		ciss		# Compaq Smart RAID 5*
#device		dpt		# DPT Smartcache III, IV - See NOTES for options
#device		hptmv		# Highpoint RocketRAID 182x
#device		hptrr		# Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
#device		iir		# Intel Integrated RAID
#device		ips		# IBM (Adaptec) ServeRAID
#device		mly		# Mylex AcceleRAID/eXtremeRAID
#device		twa		# 3ware 9000 series PATA/SATA RAID

# RAID controllers
#device		aac		# Adaptec FSA RAID
#device		aacp		# SCSI passthrough for aac (requires CAM)
#device		ida		# Compaq Smart RAID
#device		mfi		# LSI MegaRAID SAS
#device		mlx		# Mylex DAC960 family
#device		pst		# Promise Supertrak SX6000
#device		twe		# 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		kbdmux		# keyboard multiplexer

device		vga		# VGA video card driver

#device		splash		# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device		sc

device		agp		# support several AGP chipsets

# Power management support (see NOTES for more options)
#device		apm
# Add suspend/resume support for the i8254.
#device		pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device		cbb		# cardbus (yenta) bridge
#device		pccard		# PC Card (16-bit) bus
#device		cardbus		# CardBus (32-bit) bus

# Serial (COM) ports
device		uart		# Generic UART driver

# Parallel port
device		ppc
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
#device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device		puc

# PCI Ethernet NICs.
device		de		# DEC/Intel DC21x4x (``Tulip'')
device		em		# Intel PRO/1000 Gigabit Ethernet Family
device		igb		# Intel PRO/1000 PCIE Server Gigabit Family
device		ixgb		# Intel PRO/10GbE Ethernet Card
device		le		# AMD Am7900 LANCE and Am79C9xx PCnet
device		ti		# Alteon Networks Tigon I/II gigabit Ethernet
device		txp		# 3Com 3cR990 (``Typhoon'')
device		vx		# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
device		ae		# Attansic/Atheros L2 FastEthernet
device		age		# Attansic/Atheros L1 Gigabit Ethernet
device		alc		# Atheros AR8131/AR8132 Ethernet
device		ale		# Atheros AR8121/AR8113/AR8114 Ethernet
device		bce		# Broadcom BCM5706/BCM5708 Gigabit Ethernet
device		bfe		# Broadcom BCM440x 10/100 Ethernet
device		bge		# Broadcom BCM570xx Gigabit Ethernet
device		dc		# DEC/Intel 21143 and various workalikes
device		et		# Agere ET1310 10/100/Gigabit Ethernet
device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
device		jme		# JMicron JMC250 Gigabit/JMC260 Fast Ethernet
device		lge		# Level 1 LXT1001 gigabit Ethernet
device		msk		# Marvell/SysKonnect Yukon II Gigabit Ethernet
device		nfe		# nVidia nForce MCP on-board Ethernet
device		nge		# NatSemi DP83820 gigabit Ethernet
device		nve		# nVidia nForce MCP on-board Ethernet Networking
device		pcn		# AMD Am79C97x PCI 10/100 (precedence over 'le')
device		re		# RealTek 8139C+/8169/8169S/8110S
device		rl		# RealTek 8129/8139
device		sf		# Adaptec AIC-6915 (``Starfire'')
device		sge		# Silicon Integrated Systems SiS190/191
device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
device		sk		# SysKonnect SK-984x & SK-982x gigabit Ethernet
device		ste		# Sundance ST201 (D-Link DFE-550TX)
device		stge		# Sundance/Tamarack TC9021 gigabit Ethernet
device		tl		# Texas Instruments ThunderLAN
device		tx		# SMC EtherPower II (83c170 ``EPIC'')
device		vge		# VIA VT612x gigabit Ethernet
device		vr		# VIA Rhine, Rhine II
device		wb		# Winbond W89C840F
device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard NICs included.
#device		cs		# Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device		ed		# NE[12]000, SMC Ultra, 3c503, DS8390 cards
device		ex		# Intel EtherExpress Pro/10 and Pro/10+
device		ep		# Etherlink III based cards
device		fe		# Fujitsu MB8696x based cards
device		ie		# EtherExpress 8/16, 3C507, StarLAN 10 etc.
device		sn		# SMC's 9000 series of Ethernet chips
device		xe		# Xircom pccard Ethernet

# Wireless NIC cards
device		wlan		# 802.11 support
options 	IEEE80211_DEBUG	# enable debug msgs
options 	IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
options 	IEEE80211_SUPPORT_MESH	# enable 802.11s draft support
device		wlan_wep	# 802.11 WEP support
device		wlan_ccmp	# 802.11 CCMP support
device		wlan_tkip	# 802.11 TKIP support
device		wlan_amrr	# AMRR transmit rate control algorithm
device		an		# Aironet 4500/4800 802.11 wireless NICs.
device		ath		# Atheros pci/cardbus NIC's
device		ath_hal		# pci/cardbus chip support
options 	AH_SUPPORT_AR5416	# enable AR5416 tx/rx descriptors
device		ath_rate_sample	# SampleRate tx rate control for ath
device		ral		# Ralink Technology RT2500 wireless NICs.
device		wi		# WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device		wl		# Older non 802.11 Wavelan wireless NIC.

# Pseudo devices.
device		loop		# Network loopback
device		random		# Entropy device
device		ether		# Ethernet support
device		vlan		# 802.1Q VLAN support
device		tun		# Packet tunnel.
device		pty		# BSD-style compatibility pseudo ttys
device		md		# Memory "disks"
device		gif		# IPv6 and IPv4 tunneling
device		faith		# IPv6-to-IPv4 relaying (translation)
device		firmware	# firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device		bpf		# Berkeley packet filter

# USB support
options 	USB_DEBUG	# enable debug msgs
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		ehci		# EHCI PCI->USB interface (USB 2.0)
device		usb		# USB Bus (required)
#device		udbp		# USB Double Bulk Pipe devices
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
device		urio		# Diamond Rio 500 MP3 player
# USB Serial devices
#device		u3g		# USB-based 3G modems (Option, Huawei, Sierra)
#device		uark		# Technologies ARK3116 based serial adapters
#device		ubsa		# Belkin F5U103 and compatible serial adapters
#device		uftdi		# For FTDI usb serial adapters
#device		uipaq		# Some WinCE based devices
#device		uplcom		# Prolific PL-2303 serial adapters
#device		uslcom		# SI Labs CP2101/CP2102 serial adapters
#device		uvisor		# Visor and Palm devices
#device		uvscom		# USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
#device		aue		# ADMtek USB Ethernet
#device		axe		# ASIX Electronics USB Ethernet
#device		cdce		# Generic USB over Ethernet
#device		cue		# CATC USB Ethernet
#device		kue		# Kawasaki LSI USB Ethernet
#device		rue		# RealTek RTL8150 USB Ethernet
#device		udav		# Davicom DM9601E USB
# USB Wireless
#device		rum		# Ralink Technology RT2501USB wireless NICs
#device		uath		# Atheros AR5523 wireless NICs
#device		ural		# Ralink Technology RT2500USB wireless NICs
#device		zyd		# ZyDAS zb1211/zb1211b wireless NICs

# FireWire support
#device		firewire	# FireWire bus code
#device		sbp		# SCSI over FireWire (Requires scbus and da)
#device		fwe		# Ethernet over FireWire (non-standard!)
#device		fwip		# IP over FireWire (RFC 2734,3146)
#device		dcons		# Dumb console driver
#device		dcons_crom	# Configuration ROM for dcons
# cd /usr/src && make kernel KERNCONF=DISKLESS DESTDIR=/usr/tftpboot
# make distribution DESTDIR=/usr/tftpboot
# cat /etc/dhcpd.conf
log-facility local7;

allow booting;
allow bootp;

subnet 192.168.66.0 netmask 255.255.255.0 
{
 option domain-name "my.local";
 option domain-name-servers 192.168.66.1;
 default-lease-time 3600;
 max-lease-time 7200;
 authoritative;
 option routers 192.168.66.1;
 range 192.168.66.50 192.168.66.100;
 option subnet-mask 255.255.255.0;
 option broadcast-address 192.168.66.255;
 option root-path "192.168.66.1:/usr/tftpboot";
 filename "/boot/pxeboot";
}
exports

Код: Выделить всё

/usr/tftpboot	-ro
inetd.conf

Код: Выделить всё

tftp	dgram	udp	wait	root	/usr/libexec/tftpd	tftpd -l -s /usr/tftpboot
rc.conf

Код: Выделить всё

ifconfig_em0="inet 192.168.66.2 netmask 0xffffff00"
inetd_enable="YES"
moused_enable="YES"

rpcbind_enable="YES"
nfs_server_enable="YES"
nfs_server_flags="-u -t -n 4"
mountd_enable="YES"
mountd_flags="-r"



dhcpd_enable="YES"
dhcpd_iface="em0"
после решил бутнутся по сети, ради теста

при загрузке

Код: Выделить всё

pxe_open: server addr : 192.168.66.1
pxe_open: server path: /usr/tftpboot
pxe_open: gateway ip: 192.168.66.1
NFS MOUNT RPS error: 60
\
немогу понять в чем трабл, вроде проблема - неможет подмонитровать nfs, но nfs нормально монтируется другими машинами. подскажите что не так
Последний раз редактировалось vadim64 2010-10-13 15:20:41, всего редактировалось 1 раз.
Причина: Юзайте теги [Code] http://forum.lissyara.su/viewtopic.php?f=53&t=28751#p262268

Хостинговая компания Host-Food.ru
Хостинг HostFood.ru
 

Услуги хостинговой компании Host-Food.ru

Хостинг HostFood.ru

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

Аватара пользователя
Alex Keda
стреляли...
Сообщения: 35456
Зарегистрирован: 2004-10-18 14:25:19
Откуда: Made in USSR
Контактная информация:

Re: создание тонкого клиента FreeBSD 8.1

Непрочитанное сообщение Alex Keda » 2010-10-13 15:17:27

как-то опций в экспортс маловато...
=======
мона по TFTP подсосать все модули и конфиги.
просто чуть медленней будет
Убей их всех! Бог потом рассортирует...

Anubis_Donetsk
рядовой
Сообщения: 34
Зарегистрирован: 2010-10-01 16:13:19

Re: создание тонкого клиента FreeBSD 8.1

Непрочитанное сообщение Anubis_Donetsk » 2010-10-13 15:59:30

Alex Keda писал(а):как-то опций в экспортс маловато...
прокурор добавит ))))

а если серьезно, то если сделать в dhcpd.conf

Код: Выделить всё

option root-path "/usr/tftpboot"
то с горем пополам идет бут ядра, сначала, делает

Код: Выделить всё

pxe_open: server addr : 0.0.0.0
pxe_open: server path: /usr/tftpboot
pxe_open: gateway ip: 192.168.66.1
несколько раз, потом начинает бутить ядро, то что не бутиться ядро, дело десятое, почему pxeboot нехочет подключатся к nfs, если явно указать nfs сервер?
Последний раз редактировалось vadim64 2010-10-15 8:18:11, всего редактировалось 2 раза.
Причина: [quote][/quote]!=[code][/code]

Anubis_Donetsk
рядовой
Сообщения: 34
Зарегистрирован: 2010-10-01 16:13:19

Re: создание тонкого клиента FreeBSD 8.1

Непрочитанное сообщение Anubis_Donetsk » 2010-10-13 17:11:44

блин, когда я уже начну помнить ip которые прописываю.

Код: Выделить всё

em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
	ether 08:00:27:70:91:3b
        inet 192.168.66.2 netmask 0xffffff00 broadcast 192.168.66.255
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
Последний раз редактировалось vadim64 2010-10-14 13:02:50, всего редактировалось 1 раз.
Причина: [quote][/quote]!=[code][/code]

Аватара пользователя
Alex Keda
стреляли...
Сообщения: 35456
Зарегистрирован: 2004-10-18 14:25:19
Откуда: Made in USSR
Контактная информация:

Re: создание тонкого клиента FreeBSD 8.1

Непрочитанное сообщение Alex Keda » 2010-10-14 23:11:40

гы =)
Убей их всех! Бог потом рассортирует...

Bacek_92
мл. сержант
Сообщения: 70
Зарегистрирован: 2010-05-22 18:02:03

Re: создание тонкого клиента FreeBSD 8.1

Непрочитанное сообщение Bacek_92 » 2010-11-13 7:53:38

Как на 64битной FreeBSD 7.2 собрать мир и ядро 32битное для бездисковых терминалов?

Аватара пользователя
manefesto
Группенфюррер
Сообщения: 6934
Зарегистрирован: 2007-07-20 8:27:30
Откуда: Пермь
Контактная информация:

Re: создание тонкого клиента FreeBSD 8.1

Непрочитанное сообщение manefesto » 2010-11-13 10:45:05

в виртуалке
я такой яростный шо аж пиздеЦ
Изображение

Bacek_92
мл. сержант
Сообщения: 70
Зарегистрирован: 2010-05-22 18:02:03

Re: создание тонкого клиента FreeBSD 8.1

Непрочитанное сообщение Bacek_92 » 2010-11-13 12:49:29

А как его переписать с виртуалки?
А других способов кроме виртуалки нету?

Bacek_92
мл. сержант
Сообщения: 70
Зарегистрирован: 2010-05-22 18:02:03

Re: создание тонкого клиента FreeBSD 8.1

Непрочитанное сообщение Bacek_92 » 2010-11-14 9:43:44

Сделал на вирт машине, загнал в тар, распаковал... и в итоге !

Код: Выделить всё

PXE-T01: File not found
PXE-E3B TFTP - File Not found
PXE-M0F: Exiting LANDesk (R) Service Agent II
И потом - появилась проблема удаления файлов с SUID. Они вобще никак не удаляются. Помогите!

Аватара пользователя
Alex Keda
стреляли...
Сообщения: 35456
Зарегистрирован: 2004-10-18 14:25:19
Откуда: Made in USSR
Контактная информация:

Re: создание тонкого клиента FreeBSD 8.1

Непрочитанное сообщение Alex Keda » 2010-11-14 21:49:48

Код: Выделить всё

man chflags
Убей их всех! Бог потом рассортирует...