в общем проблема такова: Мать S5000PSL, висят 4 сасовских винта, загоняем их утилой в RAID 10, но когда ставлю правильную ось она видит 4 винта с меткой da раньше sa называла, как я понимаю контроллер она понимает да вот не до конца ( я на фре не так давно, может где ступил или ещё чего, помогите пожалуйста). Ставил FreeBSD 7.2 amd64
Код: Выделить всё
Intel® Server Board S5000PSL (ROMBR)
Server RAID
(LSI* 1068x8-Port SAS controller with optional upgrade to intelligent hardware RAID 0, 1, 5, 10, 50 using Intel® I/O processor 333 MHz)
Intel® Server Board S5000PSL (SASR)
(4-Port LSI* 1064e SAS controller with Intel® Embedded RAID Technology II providing RAID 0, 1, 10 and optional AXXRAKSW5 for RAID 5)
На машине именно этот контроллерIntel® Server Board S5000PSL (SASR)
(4-Port LSI* 1064e SAS controller with Intel® Embedded RAID Technology II providing RAID 0, 1, 10 and optional AXXRAKSW5 for RAID 5)
Код: Выделить всё
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Fri May 1 07:18:07 UTC 2009
root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz (2506.23-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40ce3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,<b19>,XSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
usable memory = 17160929280 (16365 MB)
avail memory = 16586596352 (15818 MB)
ACPI APIC Table: <INTEL S5000PSL>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL S5000PSL> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xca2,0xca3,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 1.0 on pci2
pci4: <ACPI PCI bus> on pcib4
mpt0: <LSILogic SAS/SATA Adapter> port 0x3000-0x30ff mem 0xb8910000-0xb8913fff,0xb8900000-0xb890ffff irq 17 at device 0.0 on pci4
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.14.0
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2
pci5: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x2020-0x203f mem 0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at device 0.0 on pci5
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:15:17:98:fe:14
em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x2000-0x201f mem 0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at device 0.1 on pci5
em1: Using MSI interrupt
em1: [FILTER]
em1: Ethernet address: 00:15:17:98:fe:15
pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci6: <ACPI PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at device 3.0 on pci0
pci7: <PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci10: <ACPI PCI bus> on pcib10
pcib11: <PCI-PCI bridge> at device 7.0 on pci0
pci11: <PCI bus> on pcib11
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib12: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci12: <ACPI PCI bus> on pcib12
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x40a0-0x40bf irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x4080-0x409f irq 22 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x4060-0x407f irq 23 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x4040-0x405f irq 22 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xb8c00400-0xb8c007ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 63XXESB USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci13: <ACPI PCI bus> on pcib13
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0xb0000000-0xb7ffffff,0xb8b00000-0xb8b0ffff irq 17 at device 12.0 on pci13
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 20 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel AHCI controller> port 0x40d8-0x40df,0x40f4-0x40f7,0x40d0-0x40d7,0x40f0-0x40f3,0x4020-0x403f mem 0xb8c00000-0xb8c003ff irq 20 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 6 ports detected
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci1
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xcf000-0xcffff,0xd0000-0xd0fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DVDR <Optiarc DVD RW AD-7203A/1.06> at ata0-master UDMA66
da0 at mpt0 bus 0 target 1 lun 0
da0: <SEAGATE ST373455SS 0002> Fixed Direct Access SCSI-5 device
da0: 300.000MB/s transfers
da0: Command Queueing Enabled
da0: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da1 at mpt0 bus 0 target 2 lun 0
da1: <SEAGATE ST373455SS 0002> Fixed Direct Access SCSI-5 device
da1: 300.000MB/s transfers
da1: Command Queueing Enabled
da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da2 at mpt0 bus 0 target 3 lun 0
da2: <SEAGATE ST373455SS 0002> Fixed Direct Access SCSI-5 device
da2: 300.000MB/s transfers
da2: Command Queueing Enabled
da2: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da3 at mpt0 bus 0 target 4 lun 0
da3: <SEAGATE ST373455SS 0002> Fixed Direct Access SCSI-5 device
da3: 300.000MB/s transfers
da3: Command Queueing Enabled
da3: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
GEOM_LABEL: Label for provider da0s1a is ufsid/4bb8671fc51754a0.
GEOM_LABEL: Label for provider da0s1d is ufsid/4bb867208ab92034.
GEOM_LABEL: Label for provider da0s1e is ufsid/4bb86720a36aaaac.
GEOM_LABEL: Label for provider da0s1f is ufsid/4bb86720fb28add9.
Trying to mount root from ufs:/dev/da0s1a
GEOM_LABEL: Label ufsid/4bb8671fc51754a0 removed.
GEOM_LABEL: Label for provider da0s1a is ufsid/4bb8671fc51754a0.
GEOM_LABEL: Label ufsid/4bb86720a36aaaac removed.
GEOM_LABEL: Label for provider da0s1e is ufsid/4bb86720a36aaaac.
GEOM_LABEL: Label ufsid/4bb86720fb28add9 removed.
GEOM_LABEL: Label for provider da0s1f is ufsid/4bb86720fb28add9.
GEOM_LABEL: Label ufsid/4bb867208ab92034 removed.
GEOM_LABEL: Label for provider da0s1d is ufsid/4bb867208ab92034.
GEOM_LABEL: Label ufsid/4bb8671fc51754a0 removed.
GEOM_LABEL: Label ufsid/4bb86720a36aaaac removed.
GEOM_LABEL: Label ufsid/4bb86720fb28add9 removed.
GEOM_LABEL: Label ufsid/4bb867208ab92034 removed.
Код: Выделить всё
hostb0@pci0:0:0:0: class=0x060000 card=0x34788086 chip=0x25d88086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000P Chipset Memory Controller Hub'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:2:0: class=0x060400 card=0x00000000 chip=0x25f78086 rev=0xb1 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x8 Port 2-3'
class = bridge
subclass = PCI-PCI
pcib7@pci0:0:3:0: class=0x060400 card=0x00000000 chip=0x25e38086 rev=0xb1 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x4 Port 3'
class = bridge
subclass = PCI-PCI
pcib8@pci0:0:4:0: class=0x060400 card=0x00000000 chip=0x25f88086 rev=0xb1 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x8 Port 4-5'
class = bridge
subclass = PCI-PCI
pcib9@pci0:0:5:0: class=0x060400 card=0x00000000 chip=0x25e58086 rev=0xb1 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x4 Port 5'
class = bridge
subclass = PCI-PCI
pcib10@pci0:0:6:0: class=0x060400 card=0x00000000 chip=0x25f98086 rev=0xb1 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x8 Port 6-7'
class = bridge
subclass = PCI-PCI
pcib11@pci0:0:7:0: class=0x060400 card=0x00000000 chip=0x25e78086 rev=0xb1 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x4 Port 7'
class = bridge
subclass = PCI-PCI
none0@pci0:0:8:0: class=0x088000 card=0x34788086 chip=0x1a388086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 5000 Series Chipset DMA Engine'
class = base peripheral
hostb1@pci0:0:16:0: class=0x060000 card=0x34788086 chip=0x25f08086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Error Reporting Registers'
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:16:1: class=0x060000 card=0x34788086 chip=0x25f08086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Error Reporting Registers'
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:16:2: class=0x060000 card=0x34788086 chip=0x25f08086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Error Reporting Registers'
class = bridge
subclass = HOST-PCI
hostb4@pci0:0:17:0: class=0x060000 card=0x34788086 chip=0x25f18086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Reserved Registers'
class = bridge
subclass = HOST-PCI
hostb5@pci0:0:19:0: class=0x060000 card=0x34788086 chip=0x25f38086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Reserved Registers'
class = bridge
subclass = HOST-PCI
hostb6@pci0:0:21:0: class=0x060000 card=0x34788086 chip=0x25f58086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset FBD Registers'
class = bridge
subclass = HOST-PCI
hostb7@pci0:0:22:0: class=0x060000 card=0x34788086 chip=0x25f68086 rev=0xb1 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset FBD Registers'
class = bridge
subclass = HOST-PCI
pcib12@pci0:0:28:0: class=0x060400 card=0x34788086 chip=0x26908086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 PCIe Root Port 1'
class = bridge
subclass = PCI-PCI
uhci0@pci0:0:29:0: class=0x0c0300 card=0x34788086 chip=0x26888086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset USB Universal Host Controller'
class = serial bus
subclass = USB
uhci1@pci0:0:29:1: class=0x0c0300 card=0x34788086 chip=0x26898086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset USB Universal Host Controller'
class = serial bus
subclass = USB
uhci2@pci0:0:29:2: class=0x0c0300 card=0x34788086 chip=0x268a8086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset USB Universal Host Controller'
class = serial bus
subclass = USB
uhci3@pci0:0:29:3: class=0x0c0300 card=0x34788086 chip=0x268b8086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset USB Universal Host Controller'
class = serial bus
subclass = USB
ehci0@pci0:0:29:7: class=0x0c0320 card=0x34788086 chip=0x268c8086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset USB2 Enhanced Host Controller'
class = serial bus
subclass = USB
pcib13@pci0:0:30:0: class=0x060401 card=0x34788086 chip=0x244e8086 rev=0xd9 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x34788086 chip=0x26708086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci0@pci0:0:31:1: class=0x01018a card=0x34788086 chip=0x269e8086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Ultra ATA Storage Controller'
class = mass storage
subclass = ATA
atapci1@pci0:0:31:2: class=0x010601 card=0x34788086 chip=0x26818086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '62089A2 LSI LOGIC, 62089A2, LSISAS1068 B0, T 0620, WE 119200.1'
class = mass storage
subclass = SATA
none1@pci0:0:31:3: class=0x0c0500 card=0x34788086 chip=0x269b8086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 SMBus Controller'
class = serial bus
subclass = SMBus
pcib2@pci0:1:0:0: class=0x060400 card=0x34798086 chip=0x35008086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB PCIe Upstream Port'
class = bridge
subclass = PCI-PCI
pcib6@pci0:1:0:3: class=0x060400 card=0x34798086 chip=0x350c8086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB PCIe to PCI-X Bridge'
class = bridge
subclass = PCI-PCI
pcib3@pci0:2:0:0: class=0x060400 card=0x34798086 chip=0x35108086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB PCIe Downstream Port E1'
class = bridge
subclass = PCI-PCI
pcib4@pci0:2:1:0: class=0x060400 card=0x34798086 chip=0x35148086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB PCIe Downstream Port E2'
class = bridge
subclass = PCI-PCI
pcib5@pci0:2:2:0: class=0x060400 card=0x34798086 chip=0x35188086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB PCIe Downstream Port E3'
class = bridge
subclass = PCI-PCI
mpt0@pci0:4:0:0: class=0x010000 card=0x34788086 chip=0x00561000 rev=0x04 hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
device = 'SAS 3000 series, 4-port with 1064E -StorPort'
class = mass storage
subclass = SCSI
em0@pci0:5:0:0: class=0x020000 card=0x34768086 chip=0x10968086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'PRO/1000 EB Network Connection'
class = network
subclass = ethernet
em1@pci0:5:0:1: class=0x020000 card=0x34768086 chip=0x10968086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'PRO/1000 EB Network Connection'
class = network
subclass = ethernet
vgapci0@pci0:13:12:0: class=0x030000 card=0x34788086 chip=0x515e1002 rev=0x02 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'Radeon ES1000 Radeon ES1000'
class = display
subclass = VGA
Я ж сказал ужеz0mb1e писал(а):Если он программный, как быть ?
Ну что могу сказать. это не совсем полноценный железезный рэйд.
Либо покупайте нормальный контроллер. Либо делайте средствами операционки.
вопрос не как а зачем. Если у вас материнская плата умрет, вы хотите искать точно такую же, чтобы собрать рейд обратно?z0mb1e писал(а):я о том, можно ли как то задействовать этот инвалидный рейд, или проще сделать средствами ОС?
Естественно нетвопрос не как а зачем. Если у вас материнская плата умрет, вы хотите искать точно такую же, чтобы собрать рейд обратно?
хотя если мать помрёт это будет жесть в любом случае, но лишний головняк не нужен тогда ответ очевиденz0mb1e писал(а):Естественно нет
Код: Выделить всё
mpt0 Adapter:
Board Name: UNUSED
Board Assembly:
Chip Name: C1064E
Chip Revision: UNUSED
RAID Levels: none
Код: Выделить всё
dmesg -aКод: Выделить всё
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:02:08 UTC 2009
root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz (2493.76-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,XSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 17179869184 (16384 MB)
avail memory = 16524500992 (15758 MB)
ACPI APIC Table: <INTEL S5000PSL>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL S5000PSL> on motherboard
acpi0: [ITHREAD]
ACPI Error: Package List length (6) larger than NumElements count (2), truncated
20090521 dsobject-590
ACPI Error: Package List length (6) larger than NumElements count (2), truncated
20090521 dsobject-590
ACPI Error: Package List length (6) larger than NumElements count (2), truncated
20090521 dsobject-590
ACPI Error: Package List length (6) larger than NumElements count (2), truncated
20090521 dsobject-590
ACPI Error: Package List length (6) larger than NumElements count (2), truncated
20090521 dsobject-590
ACPI Error: Package List length (6) larger than NumElements count (2), truncated
20090521 dsobject-590
ACPI Error: Package List length (6) larger than NumElements count (2), truncated
20090521 dsobject-590
ACPI Error: Package List length (6) larger than NumElements count (2), truncated
20090521 dsobject-590
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xca2,0xca3,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 1.0 on pci2
pci4: <ACPI PCI bus> on pcib4
mpt0: <LSILogic SAS/SATA Adapter> port 0x3000-0x30ff mem 0xb8910000-0xb8913fff,0xb8900000-0xb890ffff irq 17 at device 0.0 on pci4
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.14.0
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2
pci5: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x2020-0x203f mem 0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at device 0.0 on pci5
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:15:17:98:fe:14
em1: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x2000-0x201f mem 0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at device 0.1 on pci5
em1: Using MSI interrupt
em1: [FILTER]
em1: Ethernet address: 00:15:17:98:fe:15
pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci6: <ACPI PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at device 3.0 on pci0
pci7: <PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci10: <ACPI PCI bus> on pcib10
pcib11: <PCI-PCI bridge> at device 7.0 on pci0
pci11: <PCI bus> on pcib11
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib12: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci12: <ACPI PCI bus> on pcib12
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x40a0-0x40bf irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x1f30
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x4080-0x409f irq 22 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0f30
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x4060-0x407f irq 23 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x0f30
usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x4040-0x405f irq 22 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x0f30
usbus3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xb8c00400-0xb8c007ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 63XXESB USB 2.0 controller> on ehci0
pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci13: <ACPI PCI bus> on pcib13
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0xb0000000-0xb7ffffff,0xb8b00000-0xb8b0ffff irq 17 at device 12.0 on pci13
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 20 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel 63XXESB2 SATA300 controller> port 0x40d8-0x40df,0x40f4-0x40f7,0x40d0-0x40d7,0x40f0-0x40f3,0x4020-0x403f mem 0xb8c00000-0xb8c003ff irq 20 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI called from vendor specific driver
atapci1: AHCI v1.10 controller with 6 3Gbps ports, PM supported
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci1
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xcf000-0xcffff,0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
ZFS filesystem version 13
ZFS storage pool version 13
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
acd0: DVDR <Optiarc DVD RW AD-7203A/1.06> at ata0-master UDMA66
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
da0 at mpt0 bus 0 target 1 lun 0
da0: <SEAGATE ST373455SS 0002> Fixed Direct Access SCSI-5 device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da1 at mpt0 bus 0 target 2 lun 0
da1: <SEAGATE ST373455SS 0002> Fixed Direct Access SCSI-5 device
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da2 at mpt0 bus 0 target 3 lun 0
da2: <SEAGATE ST373455SS 0002> Fixed Direct Access SCSI-5 device
da2: 300.000MB/s transfers
da2: Command Queueing enabled
da2: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da3 at mpt0 bus 0 target 4 lun 0
da3: <SEAGATE ST373455SS 0002> Fixed Direct Access SCSI-5 device
da3: 300.000MB/s transfers
da3: Command Queueing enabled
da3: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
Trying to mount root from ufs:/dev/da0s1a
Setting hostuuid: ceb72e81-f38e-11dd-852f-00151798fe14.
Setting hostid: 0xad87e362.
Entropy harvesting:
interrupts
ethernet
point_to_point
kickstart
.
Starting file system checks:
/dev/da0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1a: clean, 33728857 free (70057 frags, 4207350 blocks, 0.2% fragmentation)
Mounting local file systems:
.
Setting hostname: stronghold
.
Starting Network: lo0 em0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
ether 00:15:17:98:fe:14
inet 192.168.0.5 netmask 0xffffff00 broadcast 192.168.0.255
media: Ethernet autoselect
status: no carrier
add net default: gateway 192.168.0.1
Additional routing options:
IP gateway=YES
.
Starting devd.
Creating and/or trimming log files
.
Starting syslogd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/zsh
32-bit compatibility ldconfig path: /usr/lib32
Clearing /tmp (X related).
Updating motd:
.
Configuring syscons:
keymap
blanktime
.
Starting sshd.
em0: link state changed to UP
Script /etc/rc.d/sendmail interrupted
Starting cron.
Starting inetd.
Starting background file system checks in 60 seconds.
Mon Apr 26 10:06:54 UTC 2010