Интересует мысль, который выбрать файл-сервер?

[maluy]

Интересует мысль, который выбрать файл-сервер?

ОС FREEBSD, 12 часов в судки 50 компютерив постоянно записывают, перезаписывают, создают файлы не больше 100 МБ + 100 компов, будут держать свои личные документы, рост количества компютерив будет увеличиваться. Машинка предназначена толко для файлового сервера, и ни для чего больше!

В сторону какого железа нужно смотреть??

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[schizoid]

у нас такие
http://h10010.www1.hp.com/wwpc/ru/ru/sm ... 02741.html

[maluy]

Какую версию BSD держите?

Как она встала, какие были проблемы с установлением???

[Alex Keda]

интел - ацтой.

[alex3]

а без процессора интел ваш компьютер был бы простым ящиком (C) реклама

[Alex Keda]

без процессовров AMD ваши компы были бы ОЧЕНЬ дорогими и медленными ящиками.
конкуренция - это всегда хорошо

[maluy]

Вот купили такое железо:

PrimeServer Lan1900 - DualXeon i5000P (1333MHz), video, 2*U320 SCSI, 2*Lan (1Gb)-CPU Server Dual-Core Xeon 5130 2GHz (1333MHz,4MB,Woodсrest,S771) Passive Heatsink, box x2-Модуль памяти 1024MB FB-DIMM DDR2-533 ECC Registered (Infineon) x2-Накопитель HDD SCSI 73GB (10.000rpm) (80pin) ** x3-PCI-X 2-Channel LSI Ultra320 (CPU i80303) without BBM & 128M cache inst.-1.44 Mb_-DVD-ROM 16x/48x-Корпус Case Server Supermicro 4U

без процессовров AMD ваши компы были бы ОЧЕНЬ дорогими и медленными ящиками.
конкуренция - это всегда хорошо

Сори. Но привык я к Интелу
Установил ОС
uname -a

FreeBSD fs.parcels.rosan.com.ua 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 08:43:30 UTC 2007 root@portnoy.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP amd64

Как по вашему мнению, будет работать с той архитектурую???

Вот dmesg:

Код: Выделить всё

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 08:43:30 UTC 2007
    root@portnoy.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
ACPI APIC Table: <PTLTD          APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU            5130  @ 2.00GHz (2000.01-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,<b9>,CX16,<b14>,<b15>,<b18>>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 2146828288 (2047 MB)
avail memory = 2061381632 (1965 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  6
 cpu3 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
cpu2: <ACPI CPU> on acpi0
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
cpu3: <ACPI CPU> on acpi0
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2400-0x24ff,0x2000-0x20ff mem 0xd8300000-0xd8301fff irq 16 at device 2.0 on pci4
ahd0: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2c00-0x2cff,0x2800-0x28ff mem 0xd8302000-0xd8303fff irq 17 at device 2.1 on pci4
ahd1: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
pcib5: <ACPI PCI-PCI bridge> at device 0.2 on pci3
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2
pci6: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x3000-0x301f mem 0xd8400000-0xd841ffff irq 18 at device 0.0 on pci6
em0: Ethernet address: 00:30:48:34:35:48
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x3020-0x303f mem 0xd8420000-0xd843ffff irq 19 at device 0.1 on pci6
em1: Ethernet address: 00:30:48:34:35:49
pcib7: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci7: <ACPI PCI bus> on pcib7
pcib8: <PCI-PCI bridge> at device 1.0 on pci7
pci8: <PCI bus> on pcib8
amr0: <LSILogic MegaRAID 1.53> mem 0xd8000000-0xd800ffff,0xd8200000-0xd827ffff irq 24 at device 0.0 on pci8
amr0: Using 64-bit DMA
amr0: delete logical drives supported by controller
amr0: <LSILogic MegaRAID SCSI 320-2X> Firmware 414E, BIOS H431, 128MB RAM
pcib9: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci10: <ACPI PCI bus> on pcib10
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib11: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib11
uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 17 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd8800000-0xd88003ff irq 17 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci12: <ACPI PCI bus> on pcib12
pci12: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DVDROM <TSSTcorpDVD-ROM SH-D162C/TS05> at ata0-master UDMA33
Waiting 5 seconds for SCSI devices to settle
amr0: delete logical drives supported by controller
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 69618MB (142577664 sectors) RAID 1 (optimal)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Trying to mount root from ufs:/dev/amrd0s1a
em0: link state changed to UP

не нравятся вот те строки:
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT

Вот top:

Код: Выделить всё

last pid:   940;  load averages:  0.00,  0.00,  0.00                                                                   up 0+00:51:06  02:20:09
23 processes:  1 running, 22 sleeping
CPU states:     % user,     % nice,     % system,     % interrupt,     % idle
Mem: 9960K Active, 6312K Inact, 25M Wired, 16K Cache, 8672K Buf, 1928M Free
Swap: 2050M Total, 2050M Free

  PID USERNAME  THR PRI NICE   SIZE    RES STATE  C   TIME   WCPU COMMAND
  840 maluy       1  96    0 30596K  4180K select 3   0:00  0.00% sshd
  843 root        1  20    0  8776K  4188K pause  2   0:00  0.00% csh
  837 root        1   4    0 30620K  4120K sbwait 0   0:00  0.00% sshd
  728 root        1  96    0  9464K  3484K select 0   0:00  0.00% sendmail
  587 root        1  96    0  3636K  1212K select 1   0:00  0.00% syslogd
  797 root        1   5    0  3600K  1124K ttyin  1   0:00  0.00% getty
  543 root        1 115    0   652K   460K select 2   0:00  0.00% devd
  798 root        1   5    0  3600K  1124K ttyin  3   0:00  0.00% getty
  738 root        1   8    0  3656K  1304K nanslp 0   0:00  0.00% cron
  842 maluy       1   8    0 18364K  1688K wait   3   0:00  0.00% su
  796 root        1   5    0  3600K  1124K ttyin  0   0:00  0.00% getty
  801 root        1   5    0  3600K  1124K ttyin  3   0:00  0.00% getty
  800 root        1   5    0  3600K  1124K ttyin  2   0:00  0.00% getty
  802 root        1   5    0  3600K  1124K ttyin  2   0:00  0.00% getty
  799 root        1   5    0  3600K  1124K ttyin  1   0:00  0.00% getty
  841 maluy       1   8    0  5188K  1788K wait   0   0:00  0.00% sh
  732 smmsp       1  20    0  9332K  3448K pause  0   0:00  0.00% sendmail
  722 root        1  96    0 19648K  3704K select 2   0:00  0.00% sshd
  756 root        1 102    0  3600K  1004K select 2   0:00  0.00% moused
  829 root        1   5    0  3600K  1124K ttyin  0   0:00  0.00% getty
  660 root        1  96    0  2516K  1016K select 0   0:00  0.00% usbd
  940 root        1  96    0  6760K  1908K CPU3   3   0:00  0.00% top
  144 root        1  20    0  2476K   888K pause  0   0:00  0.00% adjkerntz

Ядро и мир еще не перекомпилировал, просто поставил для теста! Что посоветуете, до того всего добра?
Сознаюсь откровенно с таким железом я впервые работать буду

[Alex Keda]

вот если бы это был AMD...
А так - хрен его знает ))