primergy rx330s1

[Fastman]

Привезли сабж. Если интересно могу выложить dmesg.
Семерка встала на него без единого писка. Очень приятный сервак.
http://www.fujitsu-siemens.ru/products/ ... 330s1.html

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[Alex Keda]

давай.

[Fastman]

Код: Выделить всё

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Tue Apr 15 17:57:11 UTC 2008
    root@itmcoder.by:/usr/obj/usr/src/sys/ITMLOWRES
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Dual-Core AMD Opteron(tm) Processor 2218 (2593.52-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40f13  Stepping = 3
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
  Cores per package: 2
usable memory = 2133856256 (2035 MB)
avail memory  = 2059165696 (1963 MB)
ACPI APIC Table: <PTLTD  	 APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ACPI Warning (tbfadt-0505): Optional field "Pm2ControlBlock" has zero address or length:        0       0/C [20070320]
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
netsmb_dev: loaded
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Apr 15 2008 17:57:03)
acpi0: <FSC D2440> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
cpu2: <ACPI CPU> on acpi0
powernow2: <PowerNow! K8> on cpu2
cpu3: <ACPI CPU> on acpi0
powernow3: <PowerNow! K8> on cpu3
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
pci2: <ACPI PCI bus> on pcib2
mpt0: <LSILogic SAS/SATA Adapter> port 0x3000-0x30ff mem 0xdeb10000-0xdeb13fff,0xdeb00000-0xdeb0ffff irq 40 at device 5.0 on pci2
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.13.0
mpt0: mpt_cam_event: 0x16
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x16
atapci0: <ServerWorks HT1000 SATA150 controller> port 0x2040-0x2047,0x2034-0x2037,0x2038-0x203f,0x2030-0x2033,0x2000-0x200f mem 0xdea20000-0xdea21fff irq 7 at device 14.0 on pci1
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
atapci1: <ServerWorks HT1000 SATA150 controller> port 0x2058-0x205f,0x204c-0x204f,0x2050-0x2057,0x2048-0x204b,0x2020-0x202f irq 7 at device 14.1 on pci1
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
atapci2: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c00-0x1c0f at device 2.1 on pci0
ata0: <ATA channel 0> on atapci2
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci2
ata1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 2.2 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> port 0x1000-0x10ff mem 0xdf104000-0xdf104fff irq 10 at device 3.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> port 0x1400-0x14ff mem 0xdf105000-0xdf105fff irq 10 at device 3.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> port 0x1800-0x18ff mem 0xdf106000-0xdf106fff irq 10 at device 3.2 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <(0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
vgapci0: <VGA-compatible display> mem 0xdd000000-0xddffffff,0xdf100000-0xdf103fff,0xde000000-0xde7fffff irq 42 at device 5.0 on pci0
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci8: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci12: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci24: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci16: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 0.0 on pci16
pci17: <ACPI PCI bus> on pcib7
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x9003> mem 0xdf010000-0xdf01ffff,0xdf000000-0xdf00ffff irq 35 at device 4.0 on pci17
miibus0: <MII bus> on bge0
brgphy0: <BCM5714 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:40:d0:ac:0a:64
bge0: [ITHREAD]
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x9003> mem 0xdf030000-0xdf03ffff,0xdf020000-0xdf02ffff irq 35 at device 4.1 on pci17
miibus1: <MII bus> on bge1
brgphy1: <BCM5714 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: Ethernet address: 00:40:d0:ac:0a:65
bge1: [ITHREAD]
pcib8: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci20: <ACPI PCI bus> on pcib8
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Genius Optical Mouse, class 0/0, rev 1.10/1.00, addr 2> on uhub0
ums0: 3 buttons and Z dir.
ukbd0: <LITEON Technology USB Multimedia Keyboard, class 0/0, rev 1.10/1.01, addr 3> on uhub0
kbd2 at ukbd0
uhid0: <LITEON Technology USB Multimedia Keyboard, class 0/0, rev 1.10/1.01, addr 3> on uhub0
Timecounters tick every 1.000 msec
hptrr: no controller detected.
acd0: DVDR <HL-DT-ST DVDRAM GSA-H40N/RV02> at ata0-master UDMA66
da0 at mpt0 bus 0 target 0 lun 0
da0: <ATA ST3500631NS 4FSC> Fixed Direct Access SCSI-5 device 
da0: 300.000MB/s transfers
da0: Command Queueing Enabled
da0: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
da1 at mpt0 bus 0 target 1 lun 0
da1: <ATA ST3250621NS 4FSC> Fixed Direct Access SCSI-5 device 
da1: 300.000MB/s transfers
da1: Command Queueing Enabled
da1: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Trying to mount root from ufs:/dev/da1s1a
bge0: link state changed to UP

Код: Выделить всё

itmcoder# uname -a
FreeBSD itmcoder.by 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Tue Apr 15 17:57:11 UTC 2008     root@itmcoder.by:/usr/obj/usr/src/sys/ITMLOWRES  amd64

[Alex Keda]

Код: Выделить всё

pcivonf -lv

?

[Fastman]

Уже увезли на инсталляционную площадку Через пару дней начну там работать - дополню инфу )
У меня тут их целая серия На подходе RX300S4 и NX40
Я давно питаю слабость к футжикам

[Alex Keda]

AMD? )

[Fastman]

К сожалению нет
Проводил тесты на ксеонах и оптеронах... так вот то что связано с медиа(оцифровка итд итп) прекрасно и ничуть не хуже
бегает на AMD. Но вот когда запихиваешь MSSQL на сервак... то тут почему AMD остается позади.......
а NX40 - небольшая системка хранения а-ля NAS.... тут разницы особо не было.. просто взяли для единообразия
чтобы все футжики были.
Кстати сделаны они толково очень очень аккуратно... сборка на высщем уровне..если сравнивать с супермикро - с дырявыми
курпусами - то верх эстетики
Вот как кстати супермикры выглядят(приложение)

[Alex Keda]

а нахрена чеерз один стоят?

[Fastman]

а нахрена чеерз один стоят?

Система охлаждения никакая у них... при установке в "бутерброд" несмотря на наличие 2-х кондиционеров
греются сильно.... Контроллеры дисков начинают орать что им жарко
Между ними будут заглушки просто....