Нашел баг репорт почти точно соответствующий проблеме:
http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/117972
Есть ли смысл писать свой баг репорт?
Поспрашивав знакомых пришел к выводу, что ошибки при подключении в контроллер на мат плате могут быть вызваны глючностью самого контроллера
Silicon Image 3112... В прочем не утверждаю...
На всякий случай полный вывод
dmesg:
Код: Выделить всё
FreeBSD 7.1-RELEASE #3: Tue Jan 20 11:27:35 UTC 2009
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf25 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4400<CNXT-ID,xTPR>
Logical CPUs per core: 2
real memory = 2146893824 (2047 MB)
avail memory = 2095493120 (1998 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
kbd1 at kbdmux0
acpi0: <PTLTD RSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel E7505 host to AGP bridge> on hostb0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> mem 0xee000000-0xefffffff at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xe9000000-0xe9ffffff,0xf0000000-0xf7ffffff irq 21 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x3000-0x303f mem 0xea100000-0xea11ffff irq 54 at device 3.0 on pci3
em0: [FILTER]
em0: Ethernet address: 00:30:48:71:f2:84
em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x3040-0x307f mem 0xea120000-0xea13ffff irq 55 at device 3.1 on pci3
em1: [FILTER]
em1: Ethernet address: 00:30:48:71:f2:85
pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2
pci4: <ACPI PCI bus> on pcib4
atapci0: <SiI SiI 3112 SATA150 controller> port 0x4030-0x4037,0x4024-0x4027,0x4028-0x402f,0x4020-0x4023,0x4000-0x400f mem 0xea200000-0xea2001ff irq 26 at device 3.0 on pci4
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
atapci1: <SiI SiI 3112 SATA150 controller> port 0x4048-0x404f,0x403c-0x403f,0x4040-0x4047,0x4038-0x403b,0x4010-0x401f mem 0xea200400-0xea2005ff irq 27 at device 4.0 on pci4
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
atapci2: <VIA 6421 SATA150 controller> port 0x5450-0x545f,0x5440-0x544f,0x5430-0x543f,0x5420-0x542f,0x5400-0x541f,0x5000-0x50ff irq 16 at device 1.0 on pci5
atapci2: [ITHREAD]
ata6: <ATA channel 0> on atapci2
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci2
ata7: [ITHREAD]
ata8: <ATA channel 2> on atapci2
ata8: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci3: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f mem 0xe8000000-0xe80003ff at device 31.1 on pci0
ata0: <ATA channel 0> on atapci3
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci3
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
fdc0: <floppy drive controller> port 0-0x5,0 on acpi0
fdc0: cannot reserve interrupt line
device_attach: fdc0 attach returned 6
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
p4tcc3: <CPU Frequency Thermal Control> on cpu3
fdc0: <floppy drive controller> port 0-0x5,0 on acpi0
fdc0: cannot reserve interrupt line
device_attach: fdc0 attach returned 6
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcc000-0xd07ff,0xd0800-0xd4fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounters tick every 1.000 msec
acd0: DMA limited to UDMA33, controller found non-ATA66 cable
acd0: CDRW <LITE-ON COMBO LTC-48161H/KQHC> at ata0-slave UDMA33
ad6: 152627MB <Seagate ST3160023AS 3.18> at ata3-master SATA150
ad8: 152627MB <Seagate ST3160023AS 3.18> at ata4-master SATA150
ad10: 152627MB <Seagate ST3160023AS 3.18> at ata5-master SATA150
ast0: FAILURE - MODE_SENSE ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x4d 0x00 0x02
ast0: FAILURE - MODE_SENSE ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x4d 0x00 0x02
ast0: FAILURE - MODE_SENSE ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x4d 0x00 0x02
ast0: FAILURE - MODE_SENSE ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x4d 0x00 0x02
device_attach: ast0 attach returned 6
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
GEOM_MIRROR: Device mirror/gm0 launched (2/2).
Trying to mount root from ufs:/dev/mirror/gm0s1a
em0: link state changed to UP