Код: Выделить всё
# dmesg | grep uscanner
module_register: module uhub/uscanner already exists!
Module uhub/uscanner failed to register: 17
uscanner0: EPSON USB2.0 MFP(Hi-Speed), rev 2.00/1.00, addr 2
module_register: module uhub/uscanner already exists!
Module uhub/uscanner failed to register: 17
uscanner0: EPSON USB2.0 MFP(Hi-Speed), rev 2.00/1.00, addr 2
Код: Выделить всё
# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04b8, product=0x082b) at /dev/uscanner0
# Your USB scanner was detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Код: Выделить всё
# scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
сам сканер в МФУ - Epson CX4900, на сайте Sane видел что есть поддержка для CX4800, может он работать или нет?
FreeBSD 6.4-Stable
