Код: Выделить всё
/usr/local/sbin/smartctl -a /dev/ad0у меня не /etc/syslogd.conf а /etc/syslog.confДальше рихтуем /etc/syslogd.conf, вносим такие строки:
# S.M.A.R.T.
local2.* /var/log/smartd.log
Код: Выделить всё
/home/pol/>ps -ax | grep smart
61837 ?? I 0:00,21 /usr/local/sbin/smartd -p /var/run/smartd.pid -l local2 --interval=300
60204 p0 S+ 0:00,01 grep smart
/home/pol/>
это в статье ошибка. ща поправлю.Dromok писал(а):у меня не /etc/syslogd.conf а /etc/syslog.confДальше рихтуем /etc/syslogd.conf, вносим такие строки:
# S.M.A.R.T.
local2.* /var/log/smartd.log
Код: Выделить всё
killall -1 syslogdКод: Выделить всё
Jul 31 22:59:09 mx smartd[29811]: smartd version 5.36 [i386-portbld-freebsd6.1] Copyright (C) 2002-6 Bruce Allen
Jul 31 22:59:09 mx smartd[29811]: Home page is http://smartmontools.sourceforge.net/
Jul 31 22:59:09 mx smartd[29811]: Opened configuration file /usr/local/etc/smartd.conf
Jul 31 22:59:09 mx smartd[29811]: Configuration file /usr/local/etc/smartd.conf parsed.
Jul 31 22:59:09 mx smartd[29811]: Device: /dev/twe0 [3ware_disk_00], opened
Jul 31 22:59:09 mx smartd[29811]: Device: /dev/twe0 [3ware_disk_00], not found in smartd database.
Jul 31 22:59:09 mx smartd[29811]: Device: /dev/twe0 [3ware_disk_00], enabled SMART Attribute Autosave.
Jul 31 22:59:09 mx smartd[29811]: Device: /dev/twe0 [3ware_disk_00], enabled SMART Automatic Offline Testing.
Jul 31 22:59:09 mx smartd[29811]: Device: /dev/twe0 [3ware_disk_00], is SMART capable. Adding to "monitor" list.
Jul 31 22:59:09 mx smartd[29811]: Device: /dev/twe0 [3ware_disk_01], opened
Jul 31 22:59:09 mx smartd[29811]: Device: /dev/twe0 [3ware_disk_01], not found in smartd database.
Jul 31 22:59:09 mx smartd[29811]: Device: /dev/twe0 [3ware_disk_01], enabled SMART Attribute Autosave.
Jul 31 22:59:10 mx smartd[29811]: Device: /dev/twe0 [3ware_disk_01], enabled SMART Automatic Offline Testing.
Jul 31 22:59:10 mx smartd[29811]: Device: /dev/twe0 [3ware_disk_01], is SMART capable. Adding to "monitor" list.
Jul 31 22:59:10 mx smartd[29811]: Monitoring 2 ATA and 0 SCSI devices
Код: Выделить всё
# $FreeBSD: src/etc/syslog.conf,v 1.26.6.2 2005/03/16 13:39:59 glebius Exp $
#
# Spaces ARE valid field separators in this file. However,
# other *nix-like systems still insist on using tabs as field
# separators. If you are sharing this file between systems, you
# may want to use only tabs as field separators here.
# Consult the syslog.conf(5) manpage.
*.err;kern.warning;auth.notice;mail.crit /dev/console
*.notice;authpriv.none;kern.debug;lpr.info;mail.crit;news.err /var/log/messages
security.* /var/log/security
auth.info;authpriv.info /var/log/auth.log
mail.info /var/log/maillog
lpr.info /var/log/lpd-errs
ftp.info /var/log/xferlog
cron.* /var/log/cron
*.=debug /var/log/debug.log
*.emerg *
# uncomment this to log all writes to /dev/console to /var/log/console.log
#console.info /var/log/console.log
# uncomment this to enable logging of all log messages to /var/log/all.log
# touch /var/log/all.log and chmod it to mode 600 before it will work
#*.* /var/log/all.log
# uncomment this to enable logging to a remote loghost named loghost
#*.* @loghost
# uncomment these if you're running inn
# news.crit /var/log/news/news.crit
# news.err /var/log/news/news.err
# news.notice /var/log/news/news.notice
!startslip
*.* /var/log/slip.log
!ppp
*.* /var/log/ppp.log
# S.M.A.R.T
local2.* /var/log/smartd.log
Код: Выделить всё
/usr/home/lissyara/>cat /etc/syslog.conf
# $FreeBSD: src/etc/syslog.conf,v 1.28 2005/03/12 12:31:16 glebius Exp $
#
# Spaces ARE valid field separators in this file. However,
# other *nix-like systems still insist on using tabs as field
# separators. If you are sharing this file between systems, you
# may want to use only tabs as field separators here.
# Consult the syslog.conf(5) manpage.
*.err;kern.warning;auth.notice;mail.crit /dev/console
*.notice;authpriv.none;kern.debug;lpr.info;mail.crit;news.err /var/log/messages
security.* /var/log/security
auth.info;authpriv.info /var/log/auth.log
mail.* /var/log/maillog
lpr.info /var/log/lpd-errs
ftp.info /var/log/xferlog
cron.* /var/log/cron
*.=debug /var/log/debug.log
*.emerg *
# S.M.A.R.T.
local2.* /var/log/smartd.log
# uncomment this to log all writes to /dev/console to /var/log/console.log
#console.info /var/log/console.log
# uncomment this to enable logging of all log messages to /var/log/all.log
# touch /var/log/all.log and chmod it to mode 600 before it will work
#*.* /var/log/all.log
# uncomment this to enable logging to a remote loghost named loghost
#*.* @loghost
# uncomment these if you're running inn
# news.crit /var/log/news/news.crit
# news.err /var/log/news/news.err
# news.notice /var/log/news/news.notice
# TFTPd
!tftpd
*.* /var/log/tftpd.log
!startslip
*.* /var/log/slip.log
!ppp
*.* /var/log/ppp.log
/usr/home/lissyara/>Код: Выделить всё
FAILED SMART self-check. BACK UP DATA NOW!
Currently unreadable (pending) sectors
Offline uncorrectable sectors
Failed SMART usage Attribute: 5 Reallocated_Sector_Ct.
Код: Выделить всё
//>/usr/local/sbin/smartctl -a /dev/ad6
smartctl 5.39 2009-12-09 r2995 [FreeBSD 6.4-RELEASE i386] (local build)
Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model: ST380817AS
Serial Number: 4MR509J7
Firmware Version: 3.42
User Capacity: 80 026 361 856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Wed Apr 6 17:23:04 2011 MSD
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 47) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 054 045 006 Pre-fail Always - 110652
3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 2012
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 9005839158
9 Power_On_Hours 0x0032 073 073 000 Old_age Always - 24042
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 293
194 Temperature_Celsius 0x0022 038 052 000 Old_age Always - 38 (0 17 0 0)
195 Hardware_ECC_Recovered 0x001a 054 045 000 Old_age Always - 110652
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 001 000 Old_age Always - 20846
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 17668 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 17668 occurred at disk power-on lifetime: 23716 hours (988 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 2f 90 33 34 e1 Error: ICRC, ABRT 47 sectors at LBA = 0x01343390 = 20198288
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 80 3f 33 34 e1 00 01:57:41.937 READ DMA
c8 00 80 bf 32 34 e1 00 01:57:41.935 READ DMA
c8 00 80 3f 32 34 e1 00 01:57:41.934 READ DMA
c8 00 80 bf 31 34 e1 00 01:57:41.951 READ DMA
c8 00 80 3f 31 34 e1 00 01:57:41.950 READ DMA
Error 17667 occurred at disk power-on lifetime: 23714 hours (988 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 4f 58 25 5a e0 Error: ICRC, ABRT 79 sectors at LBA = 0x005a2558 = 5907800
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 80 27 25 5a e0 00 00:12:14.540 READ DMA
c8 00 80 a7 24 5a e0 00 00:12:14.538 READ DMA
c8 00 80 27 24 5a e0 00 00:12:14.536 READ DMA
c8 00 80 a7 23 5a e0 00 00:12:14.533 READ DMA
c8 00 80 27 23 5a e0 00 00:12:14.548 READ DMA
Error 17666 occurred at disk power-on lifetime: 23714 hours (988 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 02 85 8d c9 e3 Error: ABRT at LBA = 0x03c98d85 = 63540613
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 08 7f 8d c9 e3 00 00:16:23.864 READ SECTOR(S)
20 00 18 bf ad af e3 00 00:16:23.854 READ SECTOR(S)
20 00 08 85 fe 24 e6 00 00:16:23.837 READ SECTOR(S)
20 00 08 65 d9 35 e5 00 00:16:23.752 READ SECTOR(S)
20 00 08 75 f4 f0 e3 00 00:16:23.737 READ SECTOR(S)
Error 17665 occurred at disk power-on lifetime: 23714 hours (988 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 1b 7d 6d 0b e0 Error: ABRT at LBA = 0x000b6d7d = 748925
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 21 77 6d 0b e0 00 00:15:08.540 READ SECTOR(S)
20 00 40 37 6d 0b e0 00 00:15:08.528 READ SECTOR(S)
20 00 40 f7 6c 0b e0 00 00:15:08.522 READ SECTOR(S)
20 00 40 b7 6c 0b e0 00 00:15:08.511 READ SECTOR(S)
20 00 40 77 6c 0b e0 00 00:15:08.506 READ SECTOR(S)
Error 17664 occurred at disk power-on lifetime: 23714 hours (988 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 16 c9 22 c5 e3 Error: ABRT at LBA = 0x03c522c9 = 63251145
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 20 bf 22 c5 e3 00 00:09:43.062 READ SECTOR(S)
30 00 08 2d 40 d2 e2 00 00:09:43.052 WRITE SECTOR(S)
20 00 08 d5 e3 d1 e2 00 00:09:43.043 READ SECTOR(S)
20 00 0c c9 0d b5 e2 00 00:09:43.027 READ SECTOR(S)
30 00 08 3d 9a f1 e5 00 00:09:43.002 WRITE SECTOR(S)
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.