Postfix + DBMail

[c4sin]

Привет всем.

вот установил по это статейки

http://www.lissyara.su/?id=1759

почтовик

вообщем проблема заключается в следующем, через вебку письма уходят, а вот через оутлук не уходят хотя при проверке соединения все проверки проходят кроме отправки тестового сообщения

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[c4sin]

и еще почему в вебке есть только папка входящие а нету папки отправленные и исходящие

[c4sin]

неужели ни кто помочь неможет?

[Alex Keda]

глючный он...
дбмайл...
а постфикс - отдыхает в сравнении с экзимом...
вы выбрали наихудшую связку из популярных...
мало кто помочь сможет...

[c4sin]

О_о а я незнал
тогда посоветуйте какую связку поставить, и если можно еще ссылочки)))

[Alex Keda]

exim и довекот.
статья в том же разделе сайта

[zheromo]

Здравствуйте!

и еще почему в вебке есть только папка входящие а нету папки отправленные и исходящие

Все просто, папки настраиваются в настройках Круглокуба во вкладке Настройки Особые папки

вообщем проблема заключается в следующем, через вебку письма уходят, а вот через оутлук не уходят хотя при проверке соединения все проверки проходят кроме отправки тестового сообщения

У меня тоже проблемы с оутлуком были.
Внимание не обратил так как у всех стоит либо Mozilla либо Бат, либо Эволюшн с которыми все работает отлично
Наверно надо у Билли спросить

глючный он...
дбмайл...

можно поподробней если можно, интересно

[Qabriel]

А как использвовать DBMAIL?
как открыт e-mail адрес?

[ProFTP]

как постфикс связывается с dbmail?

почему я не вижу в логах вот это?

Код: Выделить всё

dbmail/lmtpd[29359]:

этого вообще нету, как буд-то постфикс сам работает!!!

письмо отправил, в логах постфик ни на что не ругатеся, в логах dbmail ничего нету вообще, но в ящике пусто!!!

делал это через telnet!


для связи postfxi и dbmail достаточно?

Код: Выделить всё

# DELIVERY TO MAILBOX
mailbox_transport = dbmail-lmtp:localhost:24
#mailbox_transport = dbmail-smtp:
#fallback_transport =

local_recipient_maps = mysql:/usr/local/etc/postfix/sql-recipients.cf
unknown_local_recipient_reject_code = 550

Код: Выделить всё

user = postfix
password = <postfix_pass>
hosts = localhost
dbname = dbmail
table = dbmail_aliases
select_field = alias
where_field = alias 

Код: Выделить всё

dbmail-lmtp     unix    -       -       n       -       -       lmtp -v
  -o disable_dns_lookups=yes

вот

вот полностью

Код: Выделить всё

#
# /usr/local/etc/postfix/main.cf
#




# workitem_owned_by_worker_id = $current_worker_id





smtpd_tls_ask_ccert = yes

#smtpd_tls_auth_only =  yes
smtpd_tls_key_file = /usr/local/etc/postfix/ssl2/smtpd.key
smtpd_tls_cert_file = /usr/local/etc/postfix/ssl2/smtpd.crt
smtpd_tls_CAfile = /usr/local/etc/postfix/ssl2/cacert.pem
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
tls_random_source = dev:/dev/urandom

smtpd_use_tls = yes

smtps_use_tls = yes #
#smtp_use_tls = yes #

smtp_tls_note_starttls_offer = yes




# LOCAL PATHNAME INFORMATION
#
# Указываем месторасположения директории очереди postfix. Также данная
# директория является корнем, когда postfix запускается в chroot окружении.
queue_directory = /var/spool/postfix

# Задает месторасположение всех postXXX команд (postmap, postconf, postdrop)
command_directory = /usr/local/sbin

# Задаем корень конфигурационных файлов, для более "быстрой навигации".
# Например, теперь можно использовать $base/header_checks вместо
# /usr/local/etc/postfix/header_checks. Мелочь, а приятно.
base = /usr/local/etc/postfix

# Задает месторасположение всех программ демонов postfix. Это программы,
# перечисленные в файле master.cf. Владельцем этой директории должен быть root
daemon_directory = /usr/local/libexec/postfix

# QUEUE AND PROCESS OWNERSHIP
#
# Задает владельца очереди postfix, а также большинства демонов postfix.
# В целях безопасности, необходимо использовать выделенную учетную запись.
# Т.е. от данного пользователя не должны запускаться какие-либо процессы
# в системе, а также он не должен являться владельцем каких-либо файлов.
mail_owner = postfix

# Права по умолчанию, использующиеся local delivery agent. Не указывайте
# здесь привилегированного пользователя или владельца postfix.
default_privs = nobody

# INTERNET HOST AND DOMAIN NAMES
#
# Задает имя хоста в формате FQDN. По умолчанию, используется значение,
# возвращаемой функцией gethostname().
#myhostname = mail.sys-adm.org.ua
myhostname = smtp.x0.org.ua

# Задает имя нашего домена. По умолчанию используется значение $myhostname
# минус первый компонент.
mydomain = x0.org.ua

# SENDING MAIL
#
# Данный параметр указывает имя домена, которое используется при отправлении
# почты с этой машины. По умолчанию, используется имя локальной машины -
# $myhostname. Для согласованности между адресами отправителя и получателя,
# myorigin также указывает доменное имя, которое добавляется к адресу
# получателя для которого не указана доменная часть.
# myorigin = $myhostname (отправлять письма от: "alex@mail.sys-adm.org.ua")
# myorigin = $mydomain (отправлять письма от: "alex@sys-adm.org.ua")
myorigin = $mydomain

# RECEIVING MAIL
#
# Указывает адреса сетевых интерфейсов, на которых будет принимать почту
# наша почтовая система. По умолчанию используются все активные интерфейсы
# на машине. При изменении этого праметра необходимо перезапустить postfix
inet_interfaces = all

# Данный параметр указывает список доменов, для которых почта будет доставляться
# локально, а не пересылаться на другой хост. Не указывайте здесь виртуальные
# домены, для этого есть специальный параметр virtual_mailbox_domains
mydestination = $myhostname, localhost.$mydomain, localhost

# REJECTING MAIL FOR UNKNOWN LOCAL USERS
#
# Таблица просмотра со всеми именами и адресами локальных получателей.
local_recipient_maps = unix:passwd.byname $alias_maps

# TRUST AND RELAY CONTROL
#
# Данный параметр задает список "доверенных" клиентов, которые обладают
# некоторыми привилегиями. В частности доверенным SMTP клиентам дозволено
# пересылать почту через postfix. Если вы не доверяете никому, то оставьте
# только 127.0.0.0/8
mynetworks = 127.0.0.0/8

# ALIAS DATABASE
#
# Данный параметр указывает список алиасов, используемый local delivery agent
# После внесения изменений в данный файл необходимо выполнить команду newaliases
# или postalias /etc/mail/aliases
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases

# SHOW SOFTWARE VERSION OR NOT
#
# Желательно сообщать как можно меньше информации о нашем почтовом сервере.
# Согласно требованиям SMTP протокола вы должны указать $myhostname вначале текста
smtpd_banner = $myhostname ESMTP

# DEBUGGING CONTROL
#
# Задает уровень информативности, когда имя или адрес SMTP клиента
# или сервера соответствует шаблону, заданному в параметре debug_peer_list.
# Следует использовать только во время отладки.
#debug_peer_list = 127.0.0.1, x0.org.
debug_peer_level = 2

# RESTRICTIONS
#
# client, helo, sender, recipient, data, end-of-data
#



# Отклонять команду ETRN
smtpd_etrn_restrictions = reject

# Заставляем отклонять почту с неизвестным адресом отправителя.
# Позволяет бороться с червями и некоторыми вирусами.
smtpd_reject_unlisted_sender = yes

# Отключает SMTP команду VRFY. В результате чего, невозможно определить
# существование определенного ящика. Данная техника (применение команды
# VRFY) используется спамерами для сбора имен почтовых ящиков.
disable_vrfy_command = yes

# Требуем чтобы адреса, передаваемые в SMTP командах MAIL FROM и RCPT TO
# заключались в <>, а также не содержали стилей или фраз RFC 822.
strict_rfc821_envelopes = yes

# Скрываем отображение имени таблицы получателей в ответе "User unknown"
# yes: User unknown in virtual mailbox table
# no: User unknown
show_user_unknown_table_name = no

# Данный адрес будет использоваться при проверки существования адреса отправителя.
address_verify_sender = <>

# Числовой код ответа SMTP сервера Postfix в случае, когда адрес
# получателя отвергнут ограничением reject_unverified_sender.
unverified_sender_reject_code = 550

# Требуем, чтобы удаленный SMTP клиент представлял себя
# в начале SMTP сессии с помощью команды HELO или EHLO.
smtpd_helo_required = yes

# Всегда отправлять EHLO вначале SMTP сессии
smtp_always_send_ehlo = yes

# Максимальное количество ошибок, которое может сделать удаленный SMTP клиент.
# При превышение данного числа Postfix разорвет соединение.
smtpd_hard_error_limit = 8

# Включаем поддержку sasl аутентификации
smtpd_sasl_auth_enable = yes

# Имя приложения, используемого для инициализации SASL сервера.
# Данный параметр задает имя конфигурационного файла. Имя smtpd
# будет соответсвовать конфигурационному файлу SASL - smtpd.conf.
smtpd_sasl_application_name = smtpd

# Включает функциональную совместимость с SMTP клиентами, которые
# используют устаревшую версию команды AUTH (RFC 2554),
# например, outlook express 4 и MicroSoft Exchange version 5.0.
broken_sasl_auth_clients = yes

# Отвергаем методы, позволяющие анонимную аутентификацию
smtpd_sasl_security_options = noanonymous

# Optional lookup table with the SASL login names
# that own sender (MAIL FROM) addresses

## smtpd_sender_login_maps = mysql:$base/mysqlLookupMaps/sender.conf

# Указываем, где postfix должен брать информацию о алиасах
##virtual_alias_maps = mysql:$base/mysqlLookupMaps/alias.conf

# Указываем, где postfix должен брать информацию о доменах
virtual_mailbox_domains = mysql:$base/mysqlLookupMaps/domain.conf

# Указываем, где postfix должен брать информацию о почтовых ящиках
## virtual_mailbox_maps = mysql:$base/mysqlLookupMaps/mailbox.conf
virtual_mailbox_base = /var/spool/mail



# Настраиваем поддержку квот
##virtual_mailbox_limit_maps = mysql:$base/mysqlLookupMaps/quota.conf
#virtual_maildir_extended=yes
#virtual_mailbox_limit_override=yes
#virtual_create_maildirsize = yes
#virtual_overquota_bounce = yes
#virtual_maildir_limit_message="Sorry, the user's maildir has overdrawn his diskspace quota, please try again later"

#mailbox_size_limit = 52428800

#message_size_limit = 5242880

# 1981 - uid и gid пользователя и группы virtual соответственно
##virtual_gid_maps = static:1981
##virtual_uid_maps = static:1981
##virtual_minimum_uid = 1000











# DELIVERY TO MAILBOX
mailbox_transport = dbmail-lmtp:localhost:24
#mailbox_transport = dbmail-smtp:
#fallback_transport =

#REJECTING MAIL FOR UNKNOWN LOCAL USERS
local_recipient_maps = mysql:/usr/local/etc/postfix/sql-recipients.cf
unknown_local_recipient_reject_code = 550



#local_recipient_maps 









readme_directory = /usr/local/share/doc/postfix
sample_directory = /usr/local/etc/postfix
sendmail_path = /usr/local/sbin/sendmail
html_directory = /usr/local/share/doc/postfix
setgid_group = maildrop
manpage_directory = /usr/local/man
newaliases_path = /usr/local/bin/newaliases
mailq_path = /usr/local/bin/mailq
data_directory = /var/db/postfix

Код: Выделить всё

#
# Postfix master process configuration file.  For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#               (yes)   (yes)   (yes)   (never) (100)
# ==========================================================================
smtp      inet  n       -      n       -       -       smtpd
submission inet n       -       n       -       -       smtpd
  -o smtpd_enforce_tls=yes
  -o smtpd_sasl_auth_enable=yes
  -o smtpd_client_restrictions=permit_sasl_authenticated,reject


smtps     inet  n       -       n       -       -       smtpd
  #-o smtpd_tls_wrappermode=yes
  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
  
dbmail-lmtp     unix    -       -       n       -       -       lmtp -v
  -o disable_dns_lookups=yes

#dbmail    unix  -       n       n       -       -       pipe
#       flags= user=dbmail argv=/usr/local/sbin/dbmail-smtp -d ${recipient}

  
#628      inet  n       -       n       -       -       qmqpd
pickup    fifo  n       -       n       60      1       pickup
cleanup   unix  n       -       n       -       0       cleanup
qmgr      fifo  n       -       n       300     1       qmgr
#qmgr     fifo  n       -       n       300     1       oqmgr
tlsmgr    unix  -       -       n       1000?   1       tlsmgr
rewrite   unix  -       -       n       -       -       trivial-rewrite
bounce    unix  -       -       n       -       0       bounce
defer     unix  -       -       n       -       0       bounce
trace     unix  -       -       n       -       0       bounce
verify    unix  -       -       n       -       1       verify
flush     unix  n       -       n       1000?   0       flush
proxymap  unix  -       -       n       -       -       proxymap
smtp      unix  -       -       n       -       -       smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay     unix  -       -       n       -       -       smtp
	-o fallback_relay=
#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq     unix  n       -       n       -       -       showq
error     unix  -       -       n       -       -       error
retry     unix  -       -       n       -       -       error
discard   unix  -       -       n       -       -       discard
local     unix  -       n       n       -       -       local
virtual   unix  -       n       n       -       -       virtual
lmtp      unix  -       -       n       -       -       lmtp
anvil     unix  -       -       n       -       1       anvil
scache	  unix	-	-	n	-	1	scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent.  See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
#maildrop  unix  -       n       n       -       -       pipe
#  flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
#
# ====================================================================
#
# The Cyrus deliver program has changed incompatibly, multiple times.
#
#old-cyrus unix  -       n       n       -       -       pipe
#  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
#
# ====================================================================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus     unix  -       n       n       -       -       pipe
#  user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
#
# ====================================================================
#
# See the Postfix UUCP_README file for configuration details.
#
#uucp      unix  -       n       n       -       -       pipe
#  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# ====================================================================
#
# Other external delivery methods.
#
#ifmail    unix  -       n       n       -       -       pipe
#  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
#
#bsmtp     unix  -       n       n       -       -       pipe
#  flags=Fq. user=bsmtp argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
#
#scalemail-backend unix -       n       n       -       2       pipe
#  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
#  ${nexthop} ${user} ${extension}
#
#mailman   unix  -       n       n       -       -       pipe
#  flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
#  ${nexthop} ${user}
proxywrite unix -       -       n       -       1       proxymap

[ProFTP]

сдлеал

перебрал конфиг, но так и не опнял в чем была проблема

Код: Выделить всё

# Global Postfix configuration file. This file lists only a subset
# of all parameters. For the syntax, and for a complete parameter
# list, see the postconf(5) manual page (command: "man 5 postconf").
#
# For common configuration examples, see BASIC_CONFIGURATION_README
# and STANDARD_CONFIGURATION_README. To find these documents, use
# the command "postconf html_directory readme_directory", or go to
# http://www.postfix.org/.
#
# For best results, change no more than 2-3 parameters at a time,
# and test if Postfix still works after every change.






# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# testing.  When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#
#soft_bounce = no

# LOCAL PATHNAME INFORMATION
#
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
#
queue_directory = /var/spool/postfix

# The command_directory parameter specifies the location of all
# postXXX commands.
#
command_directory = /usr/local/sbin

# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
daemon_directory = /usr/local/libexec/postfix

# The data_directory parameter specifies the location of Postfix-writable
# data files (caches, random numbers). This directory must be owned
# by the mail_owner account (see below).
#
data_directory = /var/db/postfix

# QUEUE AND PROCESS OWNERSHIP
#
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes.  Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM.  In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
#
mail_owner = postfix

# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#
#default_privs = nobody

# INTERNET HOST AND DOMAIN NAMES
# 
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld

# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#
#mydomain = domain.tld

# SENDING MAIL
# 
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites.  If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# user@that.users.mailhost.
#

base = /usr/local/etc/postfix

# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#
#myorigin = $myhostname
#myorigin = $mydomain

myhostname = smtp.x0.org.ua

mydomain = x0.org.ua

# RECEIVING MAIL

# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on.  By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
#
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
#
# Note: you need to stop/start Postfix when this parameter changes.
#
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost

# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
#
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4

# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
#
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
#
# The default is $myhostname + localhost.$mydomain.  On a mail domain
# gateway, you should also include $mydomain.
#
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
#
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# STANDARD_CONFIGURATION_README).
#
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
#
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
#
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#
#mydestination = $myhostname, localhost.$mydomain, localhost
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
#	mail.$mydomain, www.$mydomain, ftp.$mydomain

# REJECTING MAIL FOR UNKNOWN LOCAL USERS
#
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination, $inet_interfaces or $proxy_interfaces.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
#
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
#
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
#
# - You define $mydestination domain recipients in files other than
#   /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
#   For example, you define $mydestination domain recipients in    
#   the $virtual_mailbox_maps files.
#
# - You redefine the local delivery agent in master.cf.
#
# - You redefine the "local_transport" setting in main.cf.
#
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
#   feature of the Postfix local delivery agent (see local(8)).
#
# Details are described in the LOCAL_RECIPIENT_README file.
#
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a user@domain.tld address.
# 
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =

# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
# and the recipient address or address local-part is not found.
#
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#
unknown_local_recipient_reject_code = 550

# TRUST AND RELAY CONTROL

# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
#
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix.  See the smtpd_recipient_restrictions parameter
# in postconf(5).
#
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
#
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
# 
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network.  Instead, specify an explicit
# mynetworks list by hand, as described below.
#  
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
# 
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host

# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
#
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
#
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table

# The relay_domains parameter restricts what destinations this system will
# relay mail to.  See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
#
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
#   subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
# 
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
# 
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace.  Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
#
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#
#relay_domains = $mydestination

# INTERNET OR INTRANET

# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
#
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
#
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
#
# If you're connected via UUCP, see also the default_transport parameter.
#
#relayhost = $mydomain
#relayhost = [gateway.my.domain]
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]

# REJECTING UNKNOWN RELAY USERS
#
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a user@domain.tld address.
# 
#relay_recipient_maps = hash:/etc/postfix/relay_recipients

# INPUT RATE CONTROL
#
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
# 
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
# 
# Specify 0 to disable the feature. Valid delays are 0..10.
# 
#in_flow_delay = 1s

# ADDRESS REWRITING
#
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.

# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
#
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.

# "USER HAS MOVED" BOUNCE MESSAGES
#
# See the discussion in the ADDRESS_REWRITING_README document.

# TRANSPORT MAP
#
# See the discussion in the ADDRESS_REWRITING_README document.

# ALIAS DATABASE
#
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
#
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
# 
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
#
# It will take a minute or so before changes become visible.  Use
# "postfix reload" to eliminate the delay.
#
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases

# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi".  This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases

# ADDRESS EXTENSIONS (e.g., user+foo)
#
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#
#recipient_delimiter = +

# DELIVERY TO MAILBOX
#
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user.  Specify
# "Maildir/" for qmail-style delivery (the / is required).
#
#home_mailbox = Mailbox
#home_mailbox = Maildir/
 
# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail

# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception:  delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"

# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for    
# non-UNIX accounts with "User unknown in local recipient table".
#
#mailbox_transport = lmtp:unix:/file/name
#mailbox_transport = cyrus

# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for    
# non-UNIX accounts with "User unknown in local recipient table".
#
#fallback_transport = lmtp:unix:/file/name
#fallback_transport = cyrus
#fallback_transport =

# The luser_relay parameter specifies an optional destination address
# for unknown recipients.  By default, mail for unknown@$mydestination,
# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
# as undeliverable.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay works only for the default Postfix local delivery agent.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for    
# non-UNIX accounts with "User unknown in local recipient table".
#
#luser_relay = $user@other.host
#luser_relay = $local@other.host
#luser_relay = admin+$local
  
# JUNK MAIL CONTROLS
# 
# The controls listed here are only a very small subset. The file
# SMTPD_ACCESS_README provides an overview.

# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
#
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
#
# For details, see "man header_checks".
#
#header_checks = regexp:/etc/postfix/header_checks

# FAST ETRN SERVICE
#
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# See the ETRN_README document for a detailed description.
# 
# The fast_flush_domains parameter controls what destinations are
# eligible for this service. By default, they are all domains that
# this server is willing to relay mail to.
# 
#fast_flush_domains = $relay_domains

# SHOW SOFTWARE VERSION OR NOT
#
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
#
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)

# PARALLEL DELIVERY TO THE SAME DESTINATION
#
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
# 
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter.  The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.

#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 20

mail_owner = postfix

# DEBUGGING CONTROL
#
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
#
debug_peer_level = 2

# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain

# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
debugger_command =
	 PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
	 ddd $daemon_directory/$process_name $process_id & sleep 5

# If you can't use X, use this to capture the call stack when a
# daemon crashes. The result is in a file in the configuration
# directory, and is named after the process name and the process ID.
#
# debugger_command =
#	PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
#	echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
#	>$config_directory/$process_name.$process_id.log & sleep 5
#
# Another possibility is to run gdb under a detached screen session.
# To attach to the screen sesssion, su root and run "screen -r
# <id_string>" where <id_string> uniquely matches one of the detached
# sessions (from "screen -list").
#
# debugger_command =
#	PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
#	-dmS $process_name gdb $daemon_directory/$process_name
#	$process_id & sleep 1

# INSTALL-TIME CONFIGURATION INFORMATION
#
# The following parameters are used when installing a new Postfix version.
# 
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
# 
sendmail_path = /usr/local/sbin/sendmail

# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
#
newaliases_path = /usr/local/bin/newaliases

# mailq_path: The full pathname of the Postfix mailq command.  This
# is the Sendmail-compatible mail queue listing command.
# 
mailq_path = /usr/local/bin/mailq

# setgid_group: The group for mail submission and queue management
# commands.  This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
#
setgid_group = maildrop

# html_directory: The location of the Postfix HTML documentation.
#
html_directory = /usr/local/share/doc/postfix

# manpage_directory: The location of the Postfix on-line manual pages.
#
manpage_directory = /usr/local/man

# sample_directory: The location of the Postfix sample configuration files.
# This parameter is obsolete as of Postfix 2.1.
#
sample_directory = /usr/local/etc/postfix

# readme_directory: The location of the Postfix README files.
#
readme_directory = /usr/local/share/doc/postfix

command_directory = /usr/local/sbin

# SENDING MAIL
myorigin = $mydomain
# RECEIVING MAIL
inet_interfaces = all
mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
# TRUST AND RELAY CONTROL
mynetworks = 127.0.0.0/8

# SHOW SOFTWARE VERSION OR NOT
smtpd_banner = $myhostname ESMTP $mail_name

#virtual_mailbox_domains = mysql:$base/mysqlLookupMaps/domain.conf


# DELIVERY TO MAILBOX
mailbox_transport = dbmail-lmtp:localhost:24
#mailbox_transport = dbmail-smtp:
#fallback_transport =

#REJECTING MAIL FOR UNKNOWN LOCAL USERS
local_recipient_maps = mysql:/usr/local/etc/postfix/sql-recipients.cf
unknown_local_recipient_reject_code = 550

  
debug_peer_level = 2



# Требуем чтобы адреса, передаваемые в SMTP командах MAIL FROM и RCPT TO
# заключались в <>, а также не содержали стилей или фраз RFC 822.
strict_rfc821_envelopes = yes

# Скрываем отображение имени таблицы получателей в ответе "User unknown"
# yes: User unknown in virtual mailbox table
# no: User unknown
show_user_unknown_table_name = no

# Данный адрес будет использоваться при проверки существования адреса отправителя.
address_verify_sender = <>



# Числовой код ответа SMTP сервера Postfix в случае, когда адрес
# получателя отвергнут ограничением reject_unverified_sender.
unverified_sender_reject_code = 550

# Требуем, чтобы удаленный SMTP клиент представлял себя
# в начале SMTP сессии с помощью команды HELO или EHLO.
smtpd_helo_required = yes

# Всегда отправлять EHLO вначале SMTP сессии
smtp_always_send_ehlo = yes

# Максимальное количество ошибок, которое может сделать удаленный SMTP клиент.
# При превышение данного числа Postfix разорвет соединение.
smtpd_hard_error_limit = 8

# Включаем поддержку sasl аутентификации
smtpd_sasl_auth_enable = yes

# Имя приложения, используемого для инициализации SASL сервера.
# Данный параметр задает имя конфигурационного файла. Имя smtpd
# будет соответсвовать конфигурационному файлу SASL - smtpd.conf.
smtpd_sasl_application_name = smtpd

# Включает функциональную совместимость с SMTP клиентами, которые
# используют устаревшую версию команды AUTH (RFC 2554),
# например, outlook express 4 и MicroSoft Exchange version 5.0.
broken_sasl_auth_clients = yes

# Отвергаем методы, позволяющие анонимную аутентификацию
smtpd_sasl_security_options = noanonymous


unknown_local_recipient_reject_code = 550



#smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination


# Дополнительные ограничения доступа  smtp сервера в контексте
# smtp запроса клиента
smtpd_client_restrictions =  permit_mynetworks,
                             permit_sasl_authenticated,
                             check_client_access hash:$base/client_access,
                     #        reject_unknown_client_hostname

# Дополнительные ограничения, применяемые сервером Postfix
# в контексте SMTP команды HELO
smtpd_helo_restrictions =       check_helo_access hash:$base/hello_access,
                                permit_mynetworks,
                                permit_sasl_authenticated,
                                reject_invalid_helo_hostname,
                                reject_non_fqdn_helo_hostname,
                                reject_unknown_helo_hostname

# Дополнительные ограничения, применяемые сервером Postfix
# в контексте команды MAIL FROM
smtpd_sender_restrictions =     permit_mynetworks,
                                check_sender_access hash:$base/sender_access,
                                reject_authenticated_sender_login_mismatch,
                                reject_unknown_sender_domain,
                                reject_unlisted_sender,
                                reject_unverified_sender

# Дополнительные ограничения, применяемые сервером Postfix
# в контексте команды RCPT TO
smtpd_recipient_restrictions =  permit_mynetworks,
                                permit_sasl_authenticated,
                                reject_unauth_destination,
                                check_recipient_access hash:$base/recipient_access,
                                reject_unlisted_recipient,
                                reject_unknown_recipient_domain,
                                reject_non_fqdn_recipient,
#                                reject_unverified_recipient

                              
                              
                              
                              
smtpd_tls_ask_ccert = yes

#smtpd_tls_auth_only =  yes
smtpd_tls_key_file = /usr/local/etc/postfix/ssl2/smtpd.key
smtpd_tls_cert_file = /usr/local/etc/postfix/ssl2/smtpd.crt
smtpd_tls_CAfile = /usr/local/etc/postfix/ssl2/cacert.pem
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
tls_random_source = dev:/dev/urandom

smtpd_use_tls = yes

smtps_use_tls = yes #
#smtp_use_tls = yes #

smtp_tls_note_starttls_offer = yes     

Код: Выделить всё

#
# Postfix master process configuration file.  For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#               (yes)   (yes)   (yes)   (never) (100)
# ==========================================================================

dbmail-lmtp     unix    -       -       n       -       -       lmtp -v
  -o disable_dns_lookups=yes
  
  
smtp      inet  n       -      n       -       -       smtpd
submission inet n       -       n       -       -       smtpd
  -o smtpd_enforce_tls=yes
  -o smtpd_sasl_auth_enable=yes
  -o smtpd_client_restrictions=permit_sasl_authenticated,reject


smtps     inet  n       -       n       -       -       smtpd
  #-o smtpd_tls_wrappermode=yes
  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject  
  

#submission inet n       -       n       -       -       smtpd
#  -o smtpd_tls_security_level=encrypt
#  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
#smtps     inet  n       -       n       -       -       smtpd
#  -o smtpd_tls_wrappermode=yes
#  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
#628      inet  n       -       n       -       -       qmqpd
pickup    fifo  n       -       n       60      1       pickup
cleanup   unix  n       -       n       -       0       cleanup
qmgr      fifo  n       -       n       300     1       qmgr
#qmgr     fifo  n       -       n       300     1       oqmgr
tlsmgr    unix  -       -       n       1000?   1       tlsmgr
rewrite   unix  -       -       n       -       -       trivial-rewrite
bounce    unix  -       -       n       -       0       bounce
defer     unix  -       -       n       -       0       bounce
trace     unix  -       -       n       -       0       bounce
verify    unix  -       -       n       -       1       verify
flush     unix  n       -       n       1000?   0       flush
proxymap  unix  -       -       n       -       -       proxymap
proxywrite unix -       -       n       -       1       proxymap
smtp      unix  -       -       n       -       -       smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay     unix  -       -       n       -       -       smtp
	-o smtp_fallback_relay=
#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq     unix  n       -       n       -       -       showq
error     unix  -       -       n       -       -       error
retry     unix  -       -       n       -       -       error
discard   unix  -       -       n       -       -       discard
local     unix  -       n       n       -       -       local
virtual   unix  -       n       n       -       -       virtual
lmtp      unix  -       -       n       -       -       lmtp
anvil     unix  -       -       n       -       1       anvil
scache    unix  -       -       n       -       1       scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent.  See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
#maildrop  unix  -       n       n       -       -       pipe
#  flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
#
# ====================================================================
#
# The Cyrus deliver program has changed incompatibly, multiple times.
#
#old-cyrus unix  -       n       n       -       -       pipe
#  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
#
# ====================================================================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus     unix  -       n       n       -       -       pipe
#  user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
#
# ====================================================================
#
# See the Postfix UUCP_README file for configuration details.
#
#uucp      unix  -       n       n       -       -       pipe
#  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# ====================================================================
#
# Other external delivery methods.
#
#ifmail    unix  -       n       n       -       -       pipe
#  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
#
#bsmtp     unix  -       n       n       -       -       pipe
#  flags=Fq. user=bsmtp argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
#
#scalemail-backend unix -       n       n       -       2       pipe
#  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
#  ${nexthop} ${user} ${extension}
#
#mailman   unix  -       n       n       -       -       pipe
#  flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
#  ${nexthop} ${user}

undefined

[Alex_hha]

открой для себя grep, ибо читать километровые конфиги с коментами нет никакого желания

[Phanthom]

Не могу законнектиться круглокубом к базе rcmail

Код: Выделить всё

# cat /usr/local/www/roundcube/logs/errors | tail
[02-Nov-2009 15:20:54 +0500]: DB Error: [Error message: extension mysql is not compiled into PHP]
 ** mysql(mysql)://roundcube:xxx@localhost/rcmail in /usr/local/www/roundcube/program/include/rcube_mdb2.php on line 100 (GET /mail/)
[02-Nov-2009 10:20:55] MDB2 Error: not found (-4): [Error message: extension mysql is not compiled into PHP]

[02-Nov-2009 15:20:55 +0500]: DB Error: [Error message: extension mysql is not compiled into PHP]
 ** mysql(mysql)://roundcube:xxx@localhost/rcmail in /usr/local/www/roundcube/program/include/rcube_mdb2.php on line 100 (GET /mail/)
[02-Nov-2009 10:22:36] MDB2 Error: not found (-4): [Error message: extension mysql is not compiled into PHP]

[02-Nov-2009 15:22:36 +0500]: DB Error: [Error message: extension mysql is not compiled into PHP]
 ** mysql(mysql)://roundcube:xxx@localhost/rcmail in /usr/local/www/roundcube/program/include/rcube_mdb2.php on line 100 (GET /mail/)

#
Смотрим расширения в php/extension.ini:

Код: Выделить всё

# cat /usr/local/etc/php/extensions.ini
extension=mysql.so
extension=pcre.so
extension=session.so
extension=sockets.so
extension=snmp.so
extension=xml.so
extension=mbstring.so
extension=iconv.so
extension=simplexml.so
extension=spl.so
extension=dom.so
extension=openssl.so
extension=ctype.so
extension=curl.so
extension=gd.so
extension=gettext.so
extension=hash.so
extension=json.so
extension=pdf.so
extension=pdo.so
extension=pdo_sqlite.so
extension=posix.so
extension=sqlite.so
extension=tokenizer.so
extension=xmlreader.so
extension=xmlwriter.so
extension=zlib.so
#

Строчка в httpd касающаяся php5:
# cat /usr/local/etc/apache22/httpd.conf | grep php5
#LoadModule php5_module libexec/apache22/libphp5.so

# cat /usr/local/etc/apache22/Includes/httpd-php5.conf
LoadModule php5_module libexec/apache22/libphp5.so
AddHandler php5-script .php
AddType text/html .php
DirectoryIndex index.php
#
Куда копнуть, не подскажете?

[Phanthom]

Нашёл почему не запускалось и не коннектилось
Как оказалось - не хватало библиотеки которая поставляется с предыдущим клиентом мускула (15) а у меня стояла только 16. Создание симлинка не помогало. Пришлось сделать мейк и скопировать из воркдиректории - всё запустилось.
теперь другой трабл. Не могу понять что за команда
postmap /usr/local/etc/postfix/transport
Точнее задом чую что она отвечает за транспортную таблицу. Но что внутри писать в соответствии со статьёй автор забыл упомянуть.
Курю маны...

[Jason]

Помогите пожалуста с проблемои:

Код: Выделить всё

DATABASE ERROR: CONNECTION FAILED! Unable to connect to the database!

Код: Выделить всё

mx# cat /usr/local/www/roundcube/logs/errors | tail
[Native message: Access denied for user 'roundcube'@'localhost' (using password: YES)]
 ** mysql(mysql)://roundcube:xxx@localhost/rcmail in /usr/local/www/roundcube/program/include/rcube_mdb2.php on line 100 (GET /mail/)
[25-Nov-2009 11:10:27] MDB2 Error: connect failed (-24): _doConnect: [Error message: Access denied for user 'roundcube'@'localhost' (using password: YES)]
[Native code: 1045]
[Native message: Access denied for user 'roundcube'@'localhost' (using password: YES)]

[25-Nov-2009 13:10:27 +0200]: DB Error: _doConnect: [Error message: Access denied for user 'roundcube'@'localhost' (using password: YES)]
[Native code: 1045]
[Native message: Access denied for user 'roundcube'@'localhost' (using password: YES)]
 ** mysql(mysql)://roundcube:xxx@localhost/rcmail in /usr/local/www/roundcube/program/include/rcube_mdb2.php on line 100 (GET /mail/)

Не Могу поняти,

[ProFTP]

нету пользовтеля или нету прав на базу или пароль не правильный

[gyash]

Стоит эта связка все работает без проблем. но есть одно но в круглолубе кроме папки входящие нету других папок. А хотелось бы иметь. Не подскажите как это исправить?

[gyash]

Ну что так никто и не подскажет?

[Alex Keda]

выкиньте и то и другое ф топку и поставьте exim+dovecot

[gyash]

выкиньте и то и другое ф топку и поставьте exim+dovecot

А как на это связке реализовать автоответчик, и пересылку писем?

[ProFTP]

Стоит эта связка все работает без проблем. но есть одно но в круглолубе кроме папки входящие нету других папок. А хотелось бы иметь. Не подскажите как это исправить?

какую папку вы хотите и зачем? папка спам была на одном серваке я видел, там были триггеры и процедуры самописные, т.е. вам нужно изменить таблицу...

ЗЫ а для группировки писем можно использовать на клиенте... создать папки кроме вх. и ис.

[Alex Keda]

выкиньте и то и другое ф топку и поставьте exim+dovecot

А как на это связке реализовать автоответчик, и пересылку писем?

по форуму поищщите
тут в кажддой пятой теме это реализовывают

[dare]

для администрирования dbmail есть вот такая игрушка DBMail Administrator (DBMA v2.5.2)
http://dbma.ca/

[Alex Keda]

это не то глюкавое PERLоподелие, что я лет 5 назад щщупал?

[VladimirL]

Помогите разобраться, что я делаю не так.
Есть сеть с WinAD+DNS и GW(FreeBSD). Добавил внутренний тестовый домен ex100.com.
Сделал все как указано в статье http://www.lissyara.su/articles/freebsd ... ix+dbmail/.
Споткнулся на
# postmap /usr/local/etc/postfix/transport
т.е. его не было. Взял из документации образец, и создал файл с содержимым
ex100.com smtp:[mail.ex100.com]

Все вроде бы настроил, но при отправке письма, даже самому себе, оно исчезает. В maillog имеем следующее:

Код: Выделить всё

...
Mar 23 12:38:01 mail postfix/smtpd[1417]: connect from localhost[127.0.0.1]
Mar 23 12:38:01 mail postfix/smtpd[1417]: 56A0139FCE1: client=localhost[127.0.0.1]
Mar 23 12:38:01 mail postfix/cleanup[1418]: 56A0139FCE1: message-id=<723a00e85590d4e5e129e8c36537e0fd@ex100.com>
Mar 23 12:38:01 mail postfix/qmgr[914]: 56A0139FCE1: from=<test@ex100.com>, size=559, nrcpt=1 (queue active)
Mar 23 12:38:01 mail postfix/lmtp[1413]: 56A0139FCE1: to=<test@ex100.com>, relay=none, delay=0.12, delays=0.12/0/0/0, dsn=4.4.1, status=deferred (connect to ex100.com[/var/run/dspam.sock]: Connection refused)
Mar 23 12:38:01 mail postfix/smtpd[1417]: disconnect from localhost[127.0.0.1]
...

[Alex Keda]

не юзайте dbmail