hylefax не принимает факсы

Vel · Непрочитанное сообщение **Vel** » 2008-07-28 10:30:13

Всем привет, ставил по этой статье. Факсы не принимает, модем настроил на автоответ. С факса когда отправляю, ждёт ответа от моего факс-сервера, не дожидаясь собственно стандартный разрыв. В чём прикол не знаю, логирование в hylafax на мой взгляд примитивное, настраивать ничего не надо толком, запустить /usr/local/sbin/faxsetup и указать устройство в моё случае /dev/cuad0 в /etc/ttys я добавил:

Код: Выделить всё

cuad0   "/usr/local/sbin/faxgetty"      dialup  on secure

Хостинг HostFood.ru · **Хостинг HostFood.ru**

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

Непрочитанное сообщение **zingel** » 2008-07-28 10:31:52

ядро собрано с cuad? comconsole_speed какая? и вообще

Код: Выделить всё

uname -a

Vel · Непрочитанное сообщение **Vel** » 2008-07-28 10:41:31

Код: Выделить всё

# uname -a
FreeBSD fax.localdomain 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008     root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386

GENERIC и так по ходу с cuad собран, модем COMовский ZyXEL OMNI 56K, я его опрашивал, всё ОК
comconsole_speed очевидно 38400

Непрочитанное сообщение **zingel** » 2008-07-28 10:42:30

чего говорит

Код: Выделить всё

cu -l /dev/cuad0

Vel · Непрочитанное сообщение **Vel** » 2008-07-28 10:48:15

ну я же говорил, что я его опрашивал, всё ок
когда в /etc/ttys не указываю

Код: Выделить всё

cuad0   "/usr/local/sbin/faxgetty"      dialup  on secure

то:

Код: Выделить всё

# cu -l /dev/cuad0
Connected

далее я его опрашивал проблем не возникало, трубу снимал, клал и т.д. весь листинг не вижу смысла приводить
когда в /etc/ttys

Код: Выделить всё

cuad0   "/usr/local/sbin/faxgetty"      dialup  on secure

то

Код: Выделить всё

# cu -l /dev/cuad0
all ports busy

Непрочитанное сообщение **zingel** » 2008-07-28 10:51:26

Код: Выделить всё

dmesg -a

Vel · Непрочитанное сообщение **Vel** » 2008-07-28 10:55:22

с модемом вопросов нету:

Код: Выделить всё

sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
..........
...........
..........
HylaFAX:
 faxq
 hfaxd (without old protocol & without SNPP support)

Непрочитанное сообщение **zingel** » 2008-07-28 10:56:32

тогда нужно смотреть, в любом случае логи программы....

Vel · Непрочитанное сообщение **Vel** » 2008-07-28 11:22:41

/var/spool/hylafax/log/c000000004

Код: Выделить всё

Jul 28 12:14:18.35: [  706]: SESSION BEGIN 000000004 7495663
Jul 28 12:14:18.35: [  706]: HylaFAX (tm) Version 4.4.4
Jul 28 12:14:18.35: [  706]: <-- [4:ATA\r]
Jul 28 12:14:21.71: [  706]: --> [7:CONNECT]
Jul 28 12:14:21.71: [  706]: ANSWER: FAX CONNECTION  DEVICE '/dev/cuad0'
Jul 28 12:14:21.71: [  706]: RECV FAX: begin
Jul 28 12:14:21.71: [  706]: <-- data [32]
Jul 28 12:14:21.71: [  706]: <-- data [2]
Jul 28 12:14:22.57: [  706]: --> [7:CONNECT]
Jul 28 12:14:22.57: [  706]: <-- data [23]
Jul 28 12:14:22.57: [  706]: <-- data [2]
Jul 28 12:14:23.32: [  706]: --> [7:CONNECT]
Jul 28 12:14:23.32: [  706]: <-- data [13]
Jul 28 12:14:23.32: [  706]: <-- data [2]
Jul 28 12:14:23.58: [  706]: --> [2:OK]
Jul 28 12:14:23.58: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 12:14:23.60: [  706]: --> [7:CONNECT]
Jul 28 12:14:24.60: [  706]: --> [2:OK]
Jul 28 12:14:24.60: [  706]: REMOTE TSI "7777777"
Jul 28 12:14:24.60: [  706]: RECV recv TSI (sender id)
Jul 28 12:14:24.60: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 12:14:24.61: [  706]: --> [7:CONNECT]
Jul 28 12:14:24.76: [  706]: --> [2:OK]
Jul 28 12:14:24.76: [  706]: <-- [9:AT+FRS=7\r]
Jul 28 12:14:26.43: [  706]: --> [2:OK]
Jul 28 12:14:26.43: [  706]: <-- [9:AT+FTH=3\r]
Jul 28 12:14:26.95: [  706]: --> [7:CONNECT]
Jul 28 12:14:26.95: [  706]: <-- data [32]
Jul 28 12:14:26.95: [  706]: <-- data [2]
Jul 28 12:14:27.81: [  706]: --> [7:CONNECT]
Jul 28 12:14:27.81: [  706]: <-- data [23]
Jul 28 12:14:27.81: [  706]: <-- data [2]
Jul 28 12:14:28.55: [  706]: --> [7:CONNECT]
Jul 28 12:14:28.55: [  706]: <-- data [13]
Jul 28 12:14:28.55: [  706]: <-- data [2]
Jul 28 12:14:28.80: [  706]: --> [2:OK]
Jul 28 12:14:28.80: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 12:14:28.82: [  706]: --> [7:CONNECT]
Jul 28 12:14:29.79: [  706]: --> [2:OK]
Jul 28 12:14:29.79: [  706]: REMOTE TSI "7777777"
Jul 28 12:14:29.79: [  706]: RECV recv TSI (sender id)
Jul 28 12:14:29.79: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 12:14:29.81: [  706]: --> [7:CONNECT]
Jul 28 12:14:29.95: [  706]: --> [2:OK]
Jul 28 12:14:29.95: [  706]: <-- [9:AT+FRS=7\r]
Jul 28 12:14:31.62: [  706]: --> [2:OK]
Jul 28 12:14:31.62: [  706]: <-- [9:AT+FTH=3\r]
Jul 28 12:14:32.13: [  706]: --> [7:CONNECT]
Jul 28 12:14:32.13: [  706]: <-- data [32]
Jul 28 12:14:32.13: [  706]: <-- data [2]
Jul 28 12:14:32.98: [  706]: --> [7:CONNECT]
Jul 28 12:14:32.98: [  706]: <-- data [23]
Jul 28 12:14:32.98: [  706]: <-- data [2]
Jul 28 12:14:33.73: [  706]: --> [7:CONNECT]
Jul 28 12:14:33.73: [  706]: <-- data [13]
Jul 28 12:14:33.73: [  706]: <-- data [2]
Jul 28 12:14:33.98: [  706]: --> [2:OK]
Jul 28 12:14:33.98: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 12:14:33.99: [  706]: --> [7:CONNECT]
Jul 28 12:14:34.97: [  706]: --> [2:OK]
Jul 28 12:14:34.97: [  706]: REMOTE TSI "7777777"
Jul 28 12:14:34.97: [  706]: RECV recv TSI (sender id)
Jul 28 12:14:34.97: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 12:14:34.98: [  706]: --> [7:CONNECT]
Jul 28 12:14:35.14: [  706]: --> [2:OK]
Jul 28 12:14:35.14: [  706]: <-- [9:AT+FRS=7\r]
Jul 28 12:14:36.81: [  706]: --> [2:OK]
Jul 28 12:14:36.81: [  706]: <-- [9:AT+FTH=3\r]
Jul 28 12:14:37.33: [  706]: --> [7:CONNECT]
Jul 28 12:14:37.33: [  706]: <-- data [32]
Jul 28 12:14:37.33: [  706]: <-- data [2]
Jul 28 12:14:38.19: [  706]: --> [7:CONNECT]
Jul 28 12:14:38.19: [  706]: <-- data [23]
Jul 28 12:14:38.19: [  706]: <-- data [2]
Jul 28 12:14:38.93: [  706]: --> [7:CONNECT]
Jul 28 12:14:38.93: [  706]: <-- data [13]
Jul 28 12:14:38.93: [  706]: <-- data [2]
Jul 28 12:14:39.19: [  706]: --> [2:OK]
Jul 28 12:14:39.19: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 12:14:39.20: [  706]: --> [7:CONNECT]
Jul 28 12:14:39.89: [  706]: --> [2:OK]
Jul 28 12:14:39.89: [  706]: HDLC frame too short (3 bytes)
Jul 28 12:14:39.89: [  706]: <-- [10:AT+FRS=21\r]
Jul 28 12:14:40.03: [  706]: --> [2:OK]
Jul 28 12:14:40.03: [  706]: <-- [9:AT+FTH=3\r]
Jul 28 12:14:40.55: [  706]: --> [7:CONNECT]
Jul 28 12:14:40.55: [  706]: <-- data [3]
Jul 28 12:14:40.55: [  706]: <-- data [2]
Jul 28 12:14:40.67: [  706]: --> [2:OK]
Jul 28 12:14:40.67: [  706]: RECV send CRP (command repeat)
Jul 28 12:14:40.67: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 12:14:40.69: [  706]: --> [7:CONNECT]
Jul 28 12:14:50.69: [  706]: <-- data [1]
Jul 28 12:14:50.70: [  706]: --> [2:OK]
Jul 28 12:14:50.70: [  706]: <-- [9:AT+FRS=7\r]
Jul 28 12:15:20.70: [  706]: MODEM <Timeout>
Jul 28 12:15:20.70: [  706]: Failure to receive silence (synchronization failure).
Jul 28 12:15:20.70: [  706]: <-- data [1]
Jul 28 12:15:20.71: [  706]: --> [2:OK]
Jul 28 12:15:20.71: [  706]: RECV FAX: Failure to receive silence (synchronization failure).
Jul 28 12:15:20.71: [  706]: RECV FAX: end
Jul 28 12:15:20.71: [  706]: Failure to receive silence (synchronization failure).
Jul 28 12:15:20.71: [  706]: SESSION END

коннект то идёт, но почему он факс не хочет принимать

Alex Keda

ну, обиделось наверно за неправильное название

))

Vel · Непрочитанное сообщение **Vel** » 2008-07-28 14:48:57

Погодите, за какое название?
Ещё я такой лог получал:

Код: Выделить всё

Jul 28 13:35:56.67: [  706]: SESSION BEGIN 000000020 7495663
Jul 28 13:35:56.67: [  706]: HylaFAX (tm) Version 4.4.4
Jul 28 13:35:56.67: [  706]: <-- [4:ATA\r]
Jul 28 13:36:00.03: [  706]: --> [7:CONNECT]
Jul 28 13:36:00.03: [  706]: ANSWER: FAX CONNECTION  DEVICE '/dev/cuad0'
Jul 28 13:36:00.03: [  706]: RECV FAX: begin
Jul 28 13:36:00.03: [  706]: <-- data [32]
Jul 28 13:36:00.03: [  706]: <-- data [2]
Jul 28 13:36:00.90: [  706]: --> [7:CONNECT]
Jul 28 13:36:00.90: [  706]: <-- data [23]
Jul 28 13:36:00.90: [  706]: <-- data [2]
Jul 28 13:36:01.64: [  706]: --> [7:CONNECT]
Jul 28 13:36:01.64: [  706]: <-- data [13]
Jul 28 13:36:01.64: [  706]: <-- data [2]
Jul 28 13:36:01.91: [  706]: --> [2:OK]
Jul 28 13:36:01.91: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:36:01.93: [  706]: --> [7:CONNECT]
Jul 28 13:36:11.93: [  706]: <-- data [1]
Jul 28 13:36:11.94: [  706]: --> [2:OK]
Jul 28 13:36:11.94: [  706]: <-- [9:AT+FRS=7\r]
Jul 28 13:36:22.99: [  706]: --> [2:OK]
Jul 28 13:36:22.99: [  706]: <-- [9:AT+FTH=3\r]
Jul 28 13:36:23.51: [  706]: --> [7:CONNECT]
Jul 28 13:36:23.51: [  706]: <-- data [32]
Jul 28 13:36:23.51: [  706]: <-- data [2]
Jul 28 13:36:24.38: [  706]: --> [7:CONNECT]
Jul 28 13:36:24.38: [  706]: <-- data [23]
Jul 28 13:36:24.38: [  706]: <-- data [2]
Jul 28 13:36:25.12: [  706]: --> [7:CONNECT]
Jul 28 13:36:25.12: [  706]: <-- data [13]
Jul 28 13:36:25.12: [  706]: <-- data [2]
Jul 28 13:36:25.37: [  706]: --> [2:OK]
Jul 28 13:36:25.37: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:36:25.38: [  706]: --> [7:CONNECT]
Jul 28 13:36:25.39: [  706]: --> [2:OK]
Jul 28 13:36:25.39: [  706]: HDLC frame too short (3 bytes)
Jul 28 13:36:25.39: [  706]: <-- [10:AT+FRS=21\r]
Jul 28 13:36:49.50: [  706]: --> [2:OK]
Jul 28 13:36:49.50: [  706]: <-- [9:AT+FTH=3\r]
Jul 28 13:36:50.02: [  706]: --> [7:CONNECT]
Jul 28 13:36:50.02: [  706]: <-- data [3]
Jul 28 13:36:50.02: [  706]: <-- data [2]
Jul 28 13:36:50.15: [  706]: --> [2:OK]
Jul 28 13:36:50.15: [  706]: RECV send CRP (command repeat)
Jul 28 13:36:50.15: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:36:50.16: [  706]: --> [7:CONNECT]
Jul 28 13:36:50.17: [  706]: --> [2:OK]
Jul 28 13:36:50.17: [  706]: HDLC frame too short (3 bytes)
Jul 28 13:36:50.17: [  706]: <-- [10:AT+FRS=21\r]
Jul 28 13:36:59.68: [  706]: --> [2:OK]
Jul 28 13:36:59.68: [  706]: <-- [9:AT+FTH=3\r]
Jul 28 13:37:00.20: [  706]: --> [7:CONNECT]
Jul 28 13:37:00.20: [  706]: <-- data [3]
Jul 28 13:37:00.20: [  706]: <-- data [2]
Jul 28 13:37:00.31: [  706]: --> [2:OK]
Jul 28 13:37:00.31: [  706]: RECV send CRP (command repeat)
Jul 28 13:37:00.31: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:00.33: [  706]: --> [7:CONNECT]
Jul 28 13:37:00.34: [  706]: --> [2:OK]
Jul 28 13:37:00.34: [  706]: RECV recv NSF (non-standard facilities)
Jul 28 13:37:00.34: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:00.46: [  706]: --> [7:CONNECT]
Jul 28 13:37:01.16: [  706]: --> [2:OK]
Jul 28 13:37:01.16: [  706]: RECV recv CSI (called subscriber id)
Jul 28 13:37:01.16: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:01.18: [  706]: --> [7:CONNECT]
Jul 28 13:37:01.54: [  706]: --> [2:OK]
Jul 28 13:37:01.54: [  706]: RECV recv DIS (identification signal)
Jul 28 13:37:01.54: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:01.55: [  706]: --> [7:CONNECT]
Jul 28 13:37:01.74: [  706]: --> [2:OK]
Jul 28 13:37:01.74: [  706]: RECV recv NSF (non-standard facilities)
Jul 28 13:37:01.74: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:01.76: [  706]: --> [7:CONNECT]
Jul 28 13:37:01.76: [  706]: --> [10:NO CARRIER]
Jul 28 13:37:01.76: [  706]: MODEM No carrier
Jul 28 13:37:01.76: [  706]: <-- [10:AT+FRS=21\r]
Jul 28 13:37:01.88: [  706]: --> [2:OK]
Jul 28 13:37:01.88: [  706]: <-- [9:AT+FTH=3\r]
Jul 28 13:37:02.40: [  706]: --> [7:CONNECT]
Jul 28 13:37:02.40: [  706]: <-- data [3]
Jul 28 13:37:02.40: [  706]: <-- data [2]
Jul 28 13:37:02.53: [  706]: --> [2:OK]
Jul 28 13:37:02.53: [  706]: RECV send CRP (command repeat)
Jul 28 13:37:02.53: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:02.54: [  706]: --> [7:CONNECT]
Jul 28 13:37:03.37: [  706]: --> [2:OK]
Jul 28 13:37:03.37: [  706]: RECV recv CSI (called subscriber id)
Jul 28 13:37:03.37: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:03.39: [  706]: --> [7:CONNECT]
Jul 28 13:37:03.76: [  706]: --> [2:OK]
Jul 28 13:37:03.76: [  706]: RECV recv DIS (identification signal)
Jul 28 13:37:03.76: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:03.77: [  706]: --> [7:CONNECT]
Jul 28 13:37:03.95: [  706]: --> [2:OK]
Jul 28 13:37:03.95: [  706]: RECV recv NSF (non-standard facilities)
Jul 28 13:37:03.95: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:03.97: [  706]: --> [7:CONNECT]
Jul 28 13:37:03.98: [  706]: --> [10:NO CARRIER]
Jul 28 13:37:03.98: [  706]: MODEM No carrier
Jul 28 13:37:03.98: [  706]: <-- [10:AT+FRS=21\r]
Jul 28 13:37:04.10: [  706]: --> [2:OK]
Jul 28 13:37:04.10: [  706]: <-- [9:AT+FTH=3\r]
Jul 28 13:37:04.62: [  706]: --> [7:CONNECT]
Jul 28 13:37:04.62: [  706]: <-- data [3]
Jul 28 13:37:04.62: [  706]: <-- data [2]
Jul 28 13:37:04.75: [  706]: --> [2:OK]
Jul 28 13:37:04.75: [  706]: RECV send CRP (command repeat)
Jul 28 13:37:04.75: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:04.76: [  706]: --> [7:CONNECT]
Jul 28 13:37:05.59: [  706]: --> [2:OK]
Jul 28 13:37:05.59: [  706]: RECV recv CSI (called subscriber id)
Jul 28 13:37:05.59: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:05.60: [  706]: --> [7:CONNECT]
Jul 28 13:37:05.97: [  706]: --> [2:OK]
Jul 28 13:37:05.97: [  706]: RECV recv DIS (identification signal)
Jul 28 13:37:05.97: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:05.99: [  706]: --> [7:CONNECT]
Jul 28 13:37:06.17: [  706]: --> [2:OK]
Jul 28 13:37:06.17: [  706]: RECV recv NSF (non-standard facilities)
Jul 28 13:37:06.17: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:06.18: [  706]: --> [7:CONNECT]
Jul 28 13:37:06.19: [  706]: --> [10:NO CARRIER]
Jul 28 13:37:06.19: [  706]: MODEM No carrier
Jul 28 13:37:06.19: [  706]: <-- [10:AT+FRS=21\r]
Jul 28 13:37:06.31: [  706]: --> [2:OK]
Jul 28 13:37:06.31: [  706]: <-- [9:AT+FTH=3\r]
Jul 28 13:37:06.83: [  706]: --> [7:CONNECT]
Jul 28 13:37:06.83: [  706]: <-- data [3]
Jul 28 13:37:06.83: [  706]: <-- data [2]
Jul 28 13:37:06.95: [  706]: --> [2:OK]
Jul 28 13:37:06.96: [  706]: RECV send CRP (command repeat)
Jul 28 13:37:06.96: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:06.97: [  706]: --> [7:CONNECT]
Jul 28 13:37:07.80: [  706]: --> [2:OK]
Jul 28 13:37:07.80: [  706]: RECV recv CSI (called subscriber id)
Jul 28 13:37:07.80: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:07.82: [  706]: --> [7:CONNECT]
Jul 28 13:37:08.17: [  706]: --> [2:OK]
Jul 28 13:37:08.18: [  706]: RECV recv DIS (identification signal)
Jul 28 13:37:08.18: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:08.19: [  706]: --> [7:CONNECT]
Jul 28 13:37:08.37: [  706]: --> [2:OK]
Jul 28 13:37:08.37: [  706]: RECV recv NSF (non-standard facilities)
Jul 28 13:37:08.37: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:08.39: [  706]: --> [7:CONNECT]
Jul 28 13:37:08.41: [  706]: --> [10:NO CARRIER]
Jul 28 13:37:08.41: [  706]: MODEM No carrier
Jul 28 13:37:08.41: [  706]: <-- [10:AT+FRS=21\r]
Jul 28 13:37:08.52: [  706]: --> [2:OK]
Jul 28 13:37:08.53: [  706]: <-- [9:AT+FTH=3\r]
Jul 28 13:37:09.05: [  706]: --> [7:CONNECT]
Jul 28 13:37:09.05: [  706]: <-- data [3]
Jul 28 13:37:09.05: [  706]: <-- data [2]
Jul 28 13:37:09.17: [  706]: --> [2:OK]
Jul 28 13:37:09.17: [  706]: RECV send CRP (command repeat)
Jul 28 13:37:09.17: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:09.19: [  706]: --> [7:CONNECT]
Jul 28 13:37:10.01: [  706]: --> [2:OK]
Jul 28 13:37:10.01: [  706]: RECV recv CSI (called subscriber id)
Jul 28 13:37:10.01: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:10.02: [  706]: --> [7:CONNECT]
Jul 28 13:37:10.39: [  706]: --> [2:OK]
Jul 28 13:37:10.39: [  706]: RECV recv DIS (identification signal)
Jul 28 13:37:10.39: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:10.41: [  706]: --> [7:CONNECT]
Jul 28 13:37:10.58: [  706]: --> [2:OK]
Jul 28 13:37:10.58: [  706]: RECV recv NSF (non-standard facilities)
Jul 28 13:37:10.58: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:10.59: [  706]: --> [7:CONNECT]
Jul 28 13:37:10.61: [  706]: --> [10:NO CARRIER]
Jul 28 13:37:10.61: [  706]: MODEM No carrier
Jul 28 13:37:10.61: [  706]: <-- [10:AT+FRS=21\r]
Jul 28 13:37:10.73: [  706]: --> [2:OK]
Jul 28 13:37:10.73: [  706]: <-- [9:AT+FTH=3\r]
Jul 28 13:37:11.25: [  706]: --> [7:CONNECT]
Jul 28 13:37:11.25: [  706]: <-- data [3]
Jul 28 13:37:11.25: [  706]: <-- data [2]
Jul 28 13:37:11.37: [  706]: --> [2:OK]
Jul 28 13:37:11.37: [  706]: RECV send CRP (command repeat)
Jul 28 13:37:11.37: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:11.39: [  706]: --> [7:CONNECT]
Jul 28 13:37:12.21: [  706]: --> [2:OK]
Jul 28 13:37:12.21: [  706]: RECV recv CSI (called subscriber id)
Jul 28 13:37:12.21: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:12.22: [  706]: --> [7:CONNECT]
Jul 28 13:37:12.58: [  706]: --> [2:OK]
Jul 28 13:37:12.58: [  706]: RECV recv DIS (identification signal)
Jul 28 13:37:12.58: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:12.60: [  706]: --> [7:CONNECT]
Jul 28 13:37:12.79: [  706]: --> [2:OK]
Jul 28 13:37:12.79: [  706]: RECV recv NSF (non-standard facilities)
Jul 28 13:37:12.79: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:12.81: [  706]: --> [7:CONNECT]
Jul 28 13:37:12.81: [  706]: --> [10:NO CARRIER]
Jul 28 13:37:12.81: [  706]: MODEM No carrier
Jul 28 13:37:12.81: [  706]: <-- [10:AT+FRS=21\r]
Jul 28 13:37:12.92: [  706]: --> [2:OK]
Jul 28 13:37:12.92: [  706]: <-- [9:AT+FTH=3\r]
Jul 28 13:37:13.46: [  706]: --> [7:CONNECT]
Jul 28 13:37:13.46: [  706]: <-- data [3]
Jul 28 13:37:13.46: [  706]: <-- data [2]
Jul 28 13:37:13.59: [  706]: --> [2:OK]
Jul 28 13:37:13.59: [  706]: RECV send CRP (command repeat)
Jul 28 13:37:13.59: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:13.60: [  706]: --> [7:CONNECT]
Jul 28 13:37:14.47: [  706]: --> [2:OK]
Jul 28 13:37:14.47: [  706]: RECV recv CSI (called subscriber id)
Jul 28 13:37:14.47: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:14.49: [  706]: --> [7:CONNECT]
Jul 28 13:37:14.84: [  706]: --> [2:OK]
Jul 28 13:37:14.84: [  706]: RECV recv DIS (identification signal)
Jul 28 13:37:14.84: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:14.86: [  706]: --> [7:CONNECT]
Jul 28 13:37:15.03: [  706]: --> [2:OK]
Jul 28 13:37:15.03: [  706]: RECV recv NSF (non-standard facilities)
Jul 28 13:37:15.03: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:15.05: [  706]: --> [7:CONNECT]
Jul 28 13:37:15.06: [  706]: --> [10:NO CARRIER]
Jul 28 13:37:15.06: [  706]: MODEM No carrier
Jul 28 13:37:15.06: [  706]: <-- [10:AT+FRS=21\r]
Jul 28 13:37:15.17: [  706]: --> [2:OK]
Jul 28 13:37:15.17: [  706]: <-- [9:AT+FTH=3\r]
Jul 28 13:37:15.69: [  706]: --> [7:CONNECT]
Jul 28 13:37:15.69: [  706]: <-- data [3]
Jul 28 13:37:15.69: [  706]: <-- data [2]
Jul 28 13:37:15.81: [  706]: --> [2:OK]
Jul 28 13:37:15.81: [  706]: RECV send CRP (command repeat)
Jul 28 13:37:15.81: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:15.82: [  706]: --> [7:CONNECT]
Jul 28 13:37:16.64: [  706]: --> [2:OK]
Jul 28 13:37:16.64: [  706]: RECV recv CSI (called subscriber id)
Jul 28 13:37:16.64: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:16.65: [  706]: --> [7:CONNECT]
Jul 28 13:37:17.02: [  706]: --> [2:OK]
Jul 28 13:37:17.02: [  706]: RECV recv DIS (identification signal)
Jul 28 13:37:17.02: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:17.03: [  706]: --> [7:CONNECT]
Jul 28 13:37:17.22: [  706]: --> [2:OK]
Jul 28 13:37:17.22: [  706]: RECV recv NSF (non-standard facilities)
Jul 28 13:37:17.22: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:17.23: [  706]: --> [7:CONNECT]
Jul 28 13:37:17.25: [  706]: --> [10:NO CARRIER]
Jul 28 13:37:17.25: [  706]: MODEM No carrier
Jul 28 13:37:17.25: [  706]: <-- [10:AT+FRS=21\r]
Jul 28 13:37:17.37: [  706]: --> [2:OK]
Jul 28 13:37:17.37: [  706]: <-- [9:AT+FTH=3\r]
Jul 28 13:37:17.90: [  706]: --> [7:CONNECT]
Jul 28 13:37:17.90: [  706]: <-- data [3]
Jul 28 13:37:17.90: [  706]: <-- data [2]
Jul 28 13:37:18.02: [  706]: --> [2:OK]
Jul 28 13:37:18.02: [  706]: RECV send CRP (command repeat)
Jul 28 13:37:18.02: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:18.03: [  706]: --> [7:CONNECT]
Jul 28 13:37:18.74: [  706]: --> [2:OK]
Jul 28 13:37:18.74: [  706]: RECV recv CSI (called subscriber id)
Jul 28 13:37:18.74: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:18.75: [  706]: --> [7:CONNECT]
Jul 28 13:37:18.77: [  706]: --> [10:NO CARRIER]
Jul 28 13:37:18.77: [  706]: MODEM No carrier
Jul 28 13:37:18.77: [  706]: <-- [10:AT+FRS=21\r]
Jul 28 13:37:18.89: [  706]: --> [2:OK]
Jul 28 13:37:18.89: [  706]: <-- [9:AT+FTH=3\r]
Jul 28 13:37:19.41: [  706]: --> [7:CONNECT]
Jul 28 13:37:19.41: [  706]: <-- data [3]
Jul 28 13:37:19.41: [  706]: <-- data [2]
Jul 28 13:37:19.52: [  706]: --> [2:OK]
Jul 28 13:37:19.52: [  706]: RECV send CRP (command repeat)
Jul 28 13:37:19.52: [  706]: <-- [9:AT+FRH=3\r]
Jul 28 13:37:19.53: [  706]: --> [7:CONNECT]
Jul 28 13:37:29.54: [  706]: <-- data [1]
Jul 28 13:37:29.55: [  706]: --> [2:OK]
Jul 28 13:37:29.55: [  706]: RECV FAX: RSPREC invalid response received
Jul 28 13:37:29.55: [  706]: RECV FAX: end
Jul 28 13:37:29.55: [  706]: RSPREC invalid response received
Jul 28 13:37:29.55: [  706]: SESSION END

Vel · Непрочитанное сообщение **Vel** » 2008-07-28 15:31:35

Блин всё начинается с лабуды

Код: Выделить всё

HDLC frame too short (3 bytes)

как с этим бороться? в каком месте у него кадр маленький

Alex Keda

хуле-факс

Vel · Непрочитанное сообщение **Vel** » 2008-07-28 17:05:20

а мне ни фига не смешно, так не по кайфу, когда невозможно объяснить что лучше юзать железку, нежеле этим порно заниматься

Alex Keda

что-то ты не так делаешь...
у меня не заводилось тока с неподдерживаемыми модемами....
=======
конфигурь по новой.

Vel · Непрочитанное сообщение **Vel** » 2008-07-28 22:11:01

Да вот именно, что тут с полупинка всё заводиться должно, вообщем мои действия:
Взял железку волосатого века ZyXel OMNI 56K, опросил, работает, присвоил значение нулевого регистра равному единице, т.е. снимать трубку после первого гудка:

Код: Выделить всё

# cu -l /dev/cuad0
Connected
ats0=1    
OK
ats0?
001

Затем установил из портов hylafax, ghostscript за собой сам вытянул, /usr/local/sbin/faxsetup отработал, экстраординарного я ничего не указывал, указал устройство cuad0, завтра конфиг выложу. Затем поправил /etc/ttys:

Код: Выделить всё

cuad0   "/usr/local/sbin/faxgetty"      dialup  on secure

всё бы должно работать, но не тут-то было

Alex Keda

а под вендой - этот момед факсы принимает?

Vel · Непрочитанное сообщение **Vel** » 2008-07-29 9:47:23

Фак, только что попробовал по мастдой на VentaZVoice и отправляет и принимает факсы.
Собственно там в VentaZvoice есть настройка размера кадра, может в этом вся фитча, он же мне говорит, что слишком маленький размер кадра - 3байта, а где его указать в hylafax я не знаю. Да по-моему такой опции и нету

Alex Keda

сноси прогу, сноси ошмётки в /var/....
ставь и конфигурь по новой.
либо модем не поддерживается, либо.... х.з...

Vel · Непрочитанное сообщение **Vel** » 2008-07-29 9:52:56

да я уже 3-ий раз виртуалку сношу.
размер кадра HDLC в VentaZVoice указан 256 байт

Vel · Непрочитанное сообщение **Vel** » 2008-07-29 9:57:23

вот кстати мой /var/spool/hylafax/etc/config.cuad0:

Код: Выделить всё

CountryCode:		7
AreaCode:		495
FAXNumber:		777
LongDistancePrefix:	1
InternationalPrefix:	011
DialStringRules:	etc/dialrules
ServerTracing:		1
SessionTracing:		11
RecvFileMode:		0600
LogFileMode:		0600
DeviceMode:		0600
RingsBeforeAnswer:	1
SpeakerVolume:		on
GettyArgs:		"-h %l dx_%s"
LocalIdentifier:	"NothingSetup"
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%P of %%T"
MaxRecvPages:		25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:		Class1		# use this to supply a hint
#ModemRate:		19200		# rate for DCE-DTE communication
#ModemFlowControl:	xonxoff		# XON/XOFF flow control assumed
#
#ModemSetupDTRCmd:	AT&D2		# setup so DTR drop resets modem
#ModemSetupDCDCmd:	AT&C1		# setup so DCD follows carrier
#GettyArgs:		"-h %l dx_%s"	# modem must auto-detect fax/data
#
# We can append the "@" symbol to the dial string so that
# the modem will wait 5 seconds before attempting to connect
# and return result codes that distinguish between no carrier
# and no answer.  This makes it possible to avoid problems with
# repeatedly dialing a number that doesn't have a fax machine
# (kudos to Stuart Lynne for this trick.)
#
# NB: If you need to prefix phone numbers to get through a PBX,
#     put it in the ModemDialCmd; e.g. "DT9%s@".
#
#ModemDialCmd:		ATDT%s		# T for tone dialing
#
# Other possible configuration stuff.  The default strings are
# shown below.  Only those that are different from the defaults
# need to be included in the configuration file.
#
#ModemResetCmds:		""		# stuff to do when modem is reset
#ModemAnswerCmd:		ATA		# use this to answer phone
#ModemNoFlowCmd:		AT&K		# disable flow control cmd
#ModemHardFlowCmd:	AT&K3		# hardware flow control cmd
#ModemSoftFlowCmd:	AT&K4		# software flow control cmd
#ModemNoAutoAnswerCmd:	ATS0=0		# disable auto-answer
#
# Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
# Note that we both turn the speaker on/off and set volume.
#
#ModemSetVolumeCmd:	"ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
#ModemEchoOffCmd:	ATE0		# disable command echo
#ModemVerboseResultsCmd:	ATV1		# enable verbose command results
#ModemResultCodesCmd:	ATQ0		# enable result codes
#ModemOnHookCmd:		ATH0		# place phone on hook (hangup)
#ModemSoftResetCmd:	ATZ		# do soft reset of modem
#ModemSoftResetCmdDelay:	3000	# pause after soft reset
#ModemWaitTimeCmd:	ATS7=60		# wait 60 seconds for carrier
#ModemCommaPauseTimeCmd:	ATS8=2		# comma pause time is 2 seconds
#ModemRecvFillOrder:	LSB2MSB		# bit order of received facsimile
#ModemSendFillOrder:	LSB2MSB		# bit order modem expects for transmit
#
Class1Cmd:		AT+FCLASS=1	# command to enter class 1
Class1PPMWaitCmd:	AT+FTS=7	# command to stop and wait before PPM
Class1TCFWaitCmd:	AT+FTS=7	# command to stop and wait before TCF
Class1EOPWaitCmd:	AT+FTS=9	# command to stop and wait before EOP
Class1SwitchingCmd:	AT+FRS=7	# silence between HDLC recv and trans
Class1RecvAbortOK:	200		# wait 200ms for abort response
Class1FrameOverhead:	4		# 4 byte overhead in recvd HDLC frames
Class1RecvIdentTimer:	40000		# 35+5secs waiting for ident frames
Class1TCFMaxNonZero:	10		# max 10% of data may be non-zero
Class1TCFMinRun:	1000		# min run is 2/3rds of TCF duration

Alex Keda

так.
идите нахрен с вашими виртуалками.
о таком надо сразу предупреждать.

Vel · Непрочитанное сообщение **Vel** » 2008-07-29 10:37:18

ну а в чём дело то? VMWare Workstation, COM порт я прикрутил физический виртуалке, с виртуалки и модем опрашивал.
А что такое?

Alex Keda

ничего.
90% людей обратившихся с проблемами настрйоки чего угодно на виртуалке решили свои проблемы сами, переставив всё на реальную машину

Fastman · Непрочитанное сообщение **Fastman** » 2008-07-29 10:58:36

Подтверждаю... в вмвари просто отвратно работает все что связанно с COM и USB портами...
Был опыт с попыткой прикрутить софт который работает по RS485 на виртуалке.. на обычном
компе конвертор RS232<->RS485 работает.. на виртуалке - нет.

forum.lissyara.su

hylefax не принимает факсы

hylefax не принимает факсы

Услуги хостинговой компании Host-Food.ru

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы

Re: hylefax не принимает факсы