Есть комп с установленной FreeBSD 6.3, пытаюсь подключить UPS Ippon BPP 500 по USB (хотя пробывал и по com-у) через NUT- никак не получается. Может кто чего подскажет?
Вот конфиги NUT:
UPS.CONF
Код: Выделить всё
[Ippon]
driver = megatec_usb
port = /dev/uhid0
desc = "ippon"
Код: Выделить всё
ACL all 0.0.0.0/0
ACL localhost 127.0.0.1/32
ACCEPT localhost
ACCEPT all
LISTEN 127.0.0.1 3493
Код: Выделить всё
[root]
password = 292250
allowfrom =localhost
actions = SET
instcmds = ALL
[monuser]
password = 292250
allowfrom = localhost
upsmon master
Код: Выделить всё
MONITOR Ippon@localhost 1 root 292250 master
MINSUPPLIES 1
SHUTDOWNCMD "/sbin/shutdown -h now"
NOTIFYCMD /usr/local/etc/nut/notify
POLLFREQ 5
POLLFREQALERT 5
HOSTSYNC 15
DEADTIME 15
POWERDOWNFLAG /tmp/killpower
NOTIFYMSG ONBATT SYSLOG+WALL+EXEC
RBWARNTIME 43200
NOCOMMWARNTIME 300
FINALDELAY 5
Код: Выделить всё
Starting action nut ..
Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb]
Carlos Rodrigues (c) 2003-2007
Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c) 2007
No supported devices found. Please check your device availability with 'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'vendorid' and 'subdriver' options
specified. Please refer to the man page for details about these options
(man 8 megatec_usb).
Please report your results to the NUT user's mailing list
<nut-upsuser@lists.alioth.debian.org>.
Driver failed to start (exit status=1)
Network UPS Tools - UPS driver controller 2.2.1
Код: Выделить всё
uhid0: OMRON USB UPS, rev 1.10/4.00, addr 2, iclass 3/0