Гость писал(а):Monarh писал(а):locale выдаёт следующее:
Код: Выделить всё
LANG=ru_RU.KOI8-R
LC_CTYPE="ru_RU.KOI8-R"
LC_COLLATE="ru_RU.KOI8-R"
LC_TIME="ru_RU.KOI8-R"
LC_NUMERIC="ru_RU.KOI8-R"
LC_MONETARY="ru_RU.KOI8-R"
LC_MESSAGES="ru_RU.KOI8-R"
LC_ALL=
И перед запуском startx и в самих Иксах.
попробуй обновить переустановить порт x11/libX11 и/или поставить юникодную локаль перед запуском сервера.
Как поставить юникодную локаль перед запуском сервера ?
У меня в .xinitrc прописано:
Так правильно или как-то по-другому надо ?
В Иксах locale пишет, что всё равно "все переменные"=ru_RU.KOI8-R
Переустановил libX11 исчезли сообщения:
Код: Выделить всё
Внимание: X сервер не поддерживает локаль
Внимание: невозможно установить модификаторы локали
Warning: locale not supported by Xlib, locale set to C
Warning: X locale modifiers not supported, using default
Failed to open input method
Гость писал(а):Monarh писал(а):У меня все три опции были уже отмечены, то есть Xserver у меня уже установлен со SUID битом.
При этом юзер входящий в группы wheel и operator может запустить Иксы, а
обычный юзер, входящий только в свою собственную группу - не может запустить Иксы.
тогда не знаю. Я вместо SUID-бита использую XDM, ибо не пользуюсь startx/xinit. Впрочем, у мя и с SUID работает
До обновления Мира и у меня всё замечательно работало.
Гость писал(а):Код: Выделить всё
$ chmod u+s $(which Xorg)
$ ls -l $(which Xorg)
-r-sr-xr-x 1 root wheel 1.9M May 31 12:49 /usr/local/bin/Xorg
[...]
На всякий случай посмотрел, у меня Xorg с такими же правами.
Гость писал(а):Можешь привести ошибку при неудачном запуске?
Вот что Иксы выдают при запуске через startx:
Код: Выделить всё
giving up.
xinit: No such file or directory (errno 2): unable to connect to X server
xinit: No such process (errno 3): Server error.
После переустановки libX11 запустил Иксы от обычного пользователя через startx -- :1,
непомню до переустановки libX11 запускал через startx -- :1 или только через startx,
хотя
вроде пытался запустить и неполучалось,
но теперь через startx -- :1 Иксы запустились.
Не понимаю почему Иксы через startx от обычного пользователя не запускаются !!!
Дисплей 0 свободен, то есть Иксы больше ни от кого не запущены.
Пытался запустить firefox от этого же юзера, ноль эмоций.
Вышел из Иксов, а они мне через консоль и говорят:
Код: Выделить всё
/usr/local/bin/firefox3: Permission denied.
Гость писал(а):Monarh писал(а):Про GLcore я как раз и хотел спросить, да потом забыл.
GLcore у тя откуда? остаток от x11/nvidia-driver?
Нет nvidia-driver я вообще не устанавливал.
Это остаток от дефолтной конфигурации иксов при первой их(Иксовой) установке в 7.0 RELEASE .
Гость писал(а):Monarh писал(а):Конечно если его не убивать, то в Иксах курсорчик ползает и левая с правой клавиши работают, но тогда не грузится synaptics, а я его всё хочу прикрутить, чтобы очень удобные, для меня, клавиши прокрутки( вверх, вниз, влево, вправо ) работали.
попробуй оставить moused включенным и поставить в конфиге
Код: Выделить всё
Section "InputDevice"
Identifier "Touchpad0"
Driver "synaptics"
Option "Device" "/dev/sysmouse"
Option "CorePointer"
Option "SHMConfig" "true"
EndSection
опцию Device можно не указывать, если сервер находит /dev/sysmouse, а не /dev/psm0.
Иксы при загрузке пишут:
Код: Выделить всё
Query no Synaptics: 000000
(EE) ALPS GlidePoint TouchPad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "ALPS GlidePoint TouchPad"
Код: Выделить всё
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.2-RELEASE amd64
Current Operating System: FreeBSD Roman.cn.ru 7.2-RELEASE FreeBSD 7.2-RELEASE #8: Sun May 31 13:56:00 NOVST 2009 root@Roman.cn.ru:/usr/obj/usr/src/sys/TURION_64_X2 amd64
Build Date: 01 June 2009 02:40:30PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 3 16:38:43 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Card0"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(**) Option "AllowEmptyInput" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/local/lib/X11/fonts/TTF/old_standard/,
/usr/local/lib/X11/fonts/TTF/liberation/,
/usr/local/lib/X11/fonts/TTF/freefont/,
/usr/local/lib/X11/fonts/TTF/win/,
/usr/local/lib/X11/fonts/OTF/old_standard/,
/usr/local/lib/X11/fonts/OTF/freefont/,
/usr/local/lib/X11/fonts/cyr-rfx/koi8-o/75dpi/,
/usr/local/lib/X11/fonts/cyr-rfx/koi8-o/misc/,
/usr/local/lib/X11/fonts/cyr-rfx/koi8-1/75dpi/,
/usr/local/lib/X11/fonts/cyr-rfx/koi8-1/misc/,
/usr/local/lib/X11/fonts/cyr-rfx/windows-1251/75dpi/,
/usr/local/lib/X11/fonts/cyr-rfx/windows-1251/misc/,
/usr/local/lib/X11/fonts/webfonts,
/usr/local/lib/X11/fonts/cyrillic/,
/usr/local/lib/X11/fonts/URW,
/usr/local/lib/X11/fonts/freefont,
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/,
built-ins
(==) ModulePath set to "/usr/local/lib/xorg/modules"
(==) |-->Input Device "ALPS GlidePoint TouchPad"
(II) No default mouse found, adding one
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "Keyboard0"
(==) No Layout section. Using the first core pointer device.
(==) No Layout section. Using the first keyboard device.
(II) Loader magic: 0x35e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 11
(--) PCI: (0@0:1:3) nVidia Corporation MCP67 Co-processor rev 162, Mem @ 0xf0600000/524288
(--) PCI:*(0@2:0:0) nVidia Corporation GeForce 8600M GS rev 161, Mem @ 0xce000000/16777216, 0xd0000000/268435456, 0xcc000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/65536
(II) System resource ranges:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nv"
(II) Loading /usr/local/lib/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.1.13
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "synaptics"
(II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "mouse"
(II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX,
GeForce 9800 GTK+, GeForce 9800 GT, Quadro FX 3700, Quadro FX 3600M,
GeForce 9600 GT, GeForce 9600 GS, GeForce 9800M GTS,
GeForce 9700M GTS, GeForce 9800M GTS, GeForce 9500 GT,
GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
GeForce 9500M G, GeForce 9300 GS, GeForce 8400 GS, GeForce 9300M GS,
GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M
(II) Primary Device is: PCI 02@00:00:0
(--) NV: Found NVIDIA GeForce 8600M GS at 02@00:00:0
(II) resource ranges after probing:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/local/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) NV(0): Initializing int10
(==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
(==) NV(0): Write-combining range (0xc0000,0x40000) was already clear
(II) NV(0): Primary V_BIOS segment is: 0xc000
(==) NV(0): Write-combining range (0x0,0x1000) was already clear
(--) NV(0): Console is VGA mode 0x3
(II) NV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(==) NV(0): Using hardware cursor
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): MMIO registers mapped at 0x802e00000
(--) NV(0): Total video RAM: 512.0 MB
(--) NV(0): BAR1 size: 256.0 MB
(--) NV(0): Mapped memory: 256.0 MB
(II) NV(0): Linear framebuffer mapped at 0x803e00000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) NV(0): Connector map:
(--) NV(0): Bus 3 -> SOR0 (LVDS)
(--) NV(0): Bus 0 -> DAC1
(--) NV(0): Bus 1 -> SOR1
(--) NV(0): Load detection: 279
(II) NV(0): I2C bus "I2C0" initialized.
(II) NV(0): Output VGA1 has no monitor section
(II) NV(0): I2C bus "I2C1" initialized.
(II) NV(0): Output DVI1 has no monitor section
(II) NV(0): LVDS native size 1440x900
(II) NV(0): Output LVDS has no monitor section
(II) NV(0): I2C bus "I2C3 (LVDS)" initialized.
(II) NV(0): Probing for EDID on I2C bus 0...
(II) NV(0): I2C device "I2C0:E-EDID segment register" registered at address 0x60.
(II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0.
(II) NV(0): ... none found
(--) NV(0): Trying load detection on VGA1 ... nothing.
(II) NV(0): Probing for EDID on I2C bus 1...
(II) NV(0): I2C device "I2C1:E-EDID segment register" registered at address 0x60.
(II) NV(0): I2C device "I2C1:ddc2" registered at address 0xA0.
(II) NV(0): ... none found
(II) NV(0): Probing for EDID on I2C bus 3...
(II) NV(0): I2C device "I2C3 (LVDS):E-EDID segment register" registered at address 0x60.
(II) NV(0): I2C device "I2C3 (LVDS):ddc2" registered at address 0xA0.
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: LPL Model: a002 Serial#: 0
(II) NV(0): Year: 2007 Week: 0
(II) NV(0): EDID Version: 1.2
(II) NV(0): Digital Display Input
(II) NV(0): Max Image Size [cm]: horiz.: 37 vert.: 23
(II) NV(0): Gamma: 2.20
(II) NV(0): No DPMS capabilities specified
(II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.590 redY: 0.349 greenX: 0.327 greenY: 0.547
(II) NV(0): blueX: 0.154 blueY: 0.138 whiteX: 0.312 whiteY: 0.328
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 88.8 MHz Image Size: 367 x 230 mm
(II) NV(0): h_active: 1440 h_sync: 1520 h_sync_end 1552 h_blank_end 1600 h_border: 0
(II) NV(0): v_active: 900 v_sync: 917 v_sync_end 923 v_blanking: 926 v_border: 0
(WW) NV(0): Unknown vendor-specific block 0
(II) NV(0): LGPhilipsLCD
(II) NV(0): LP171WP4-TLB1
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff00320c02a000000000
(II) NV(0): 00110102802517780a1c909759538c27
(II) NV(0): 23505400000001010101010101010101
(II) NV(0): 010101010101ab22a0a050841a305020
(II) NV(0): 16046fe6100000190000000000000000
(II) NV(0): 00000000000000000000000000fe004c
(II) NV(0): 475068696c6970734c43440a000000fe
(II) NV(0): 004c503137315750342d544c42310093
(II) NV(0): EDID vendor "LPL", prod id 40962
(II) NV(0): Output VGA1 disconnected
(II) NV(0): Output DVI1 disconnected
(II) NV(0): Output LVDS connected
(II) NV(0): Using exact sizes for initial modes
(II) NV(0): Output LVDS using initial mode 1440x900
(--) NV(0): Virtual size is 1440x1440 (pitch 1536)
(**) NV(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
(II) NV(0): Modeline "1440x900"x59.9 88.75 1440 1520 1552 1600 900 917 923 926 -hsync -vsync (55.5 kHz)
(==) NV(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/local/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(--) NV(0): 183.56 MB available for offscreen pixmaps
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(II) NV(0): DPMS enabled
(II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) NV(0): Setting screen physical size to 367 x 230
(II) Synaptics touchpad driver version 1.1.1
(**) Option "Device" "/dev/sysmouse"
(**) Option "SHMConfig" "on"
Query no Synaptics: 000000
(--) ALPS GlidePoint TouchPad: no supported touchpad found
(EE) ALPS GlidePoint TouchPad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "ALPS GlidePoint TouchPad"
(II) UnloadModule: "synaptics"
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/sysmouse"
(--) <default pointer>: Device: "/dev/sysmouse"
(==) <default pointer>: Protocol: "Auto"
(**) Option "AlwaysCore"
(**) <default pointer>: always reports core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(**) <default pointer>: (accel) keeping acceleration scheme 1
(**) <default pointer>: (accel) filter chain progression: 2.00
(**) <default pointer>: (accel) filter stage 0: 20.00 ms
(**) <default pointer>: (accel) set acceleration profile 0
(II) <default pointer>: SetupAuto: hw.iftype is 4, hw.model is 0
(II) <default pointer>: SetupAuto: protocol is SysMouse
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us,ru(winkeys)"
(**) Keyboard0: XkbLayout: "us,ru(winkeys)"
(**) Option "XkbOptions" "grp:caps_toggle,grp_led:scroll"
(**) Keyboard0: XkbOptions: "grp:caps_toggle,grp_led:scroll"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) UnloadModule: "mouse"
(II) UnloadModule: "kbd"
(==) NV(0): Write-combining range (0x0,0x1000) was already clear
Код: Выделить всё
(II) Synaptics touchpad driver version 1.1.1
(**) Option "Device" "/dev/sysmouse"
(**) Option "SHMConfig" "on"
Query no Synaptics: 000000
(--) ALPS GlidePoint TouchPad: no supported touchpad found
(EE) ALPS GlidePoint TouchPad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "ALPS GlidePoint TouchPad"
(II) UnloadModule: "synaptics"
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/sysmouse"
(--) <default pointer>: Device: "/dev/sysmouse"
(==) <default pointer>: Protocol: "Auto"
Похоже moused не поддерживает данную модель тачпадов( GlidePoint )
А следовательно не может настроить и просто выгружает его
и затем загружает модуль mouse с умолчальными настройками, либо
просто неправильно указан протокол, а сам он определить его не может,
что более вероятно, поскольку если в качестве протокола использовать
"glidepoint",
то курсорчик в Иксах начинает себя странно вести:
дрыгается, забивается в левый верхний угол, эмулирует нажатие правой кнопки( появляется контекстное меню )
в общем работать в таком состоянии с ним невозможно, но по-крайней мере он подаёт признаки жизни.
Просто он не те события посылает устройству и соответственно не та реакция какая хотелось бы.
И в логе появляются странные опции, ранее не проявлявшие своего существования и более того нигде не документированные,
по-крайней мере я не нашёл их ни в одной из документаций на грызунов.
Содержимое Xorg.0.log при загруженном moused, sysmouse в качестве устройства и протоколе "glidepoint" в сравнении с протоколом "auto"
Код: Выделить всё
14c14
< (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 2 22:45:25 2009
---
> (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 2 22:42:48 2009
376c376
< (**) Option "Protocol" "glidepoint"
---
> (**) Option "Protocol" "auto"
378c378
< (**) Mouse: Protocol: "glidepoint"
---
> (**) Mouse: Protocol: "auto"
382,388d381
< (**) Option "BaudRate" "1200"
< (**) Option "StopBits" "1"
< (**) Option "DataBits" "7"
< (**) Option "Parity" "None"
< (**) Option "Vmin" "1"
< (**) Option "Vtime" "0"
< (**) Option "FlowControl" "None"
396d388
< (**) Mouse: BaudRate: 1200
401a394,395
> (II) Mouse: SetupAuto: hw.iftype is 4, hw.model is 0
> (II) Mouse: SetupAuto: protocol is SysMouse
Может кто-нибудь подскажет:
что означают эти опции и/или где можно нарыть описание на них ?
и/или как можно решить проблему с таким странным поведением грызуна ?
Гость писал(а):Monarh писал(а):А по-поводу synaptics'а, если не загружать модуль, то в логе он ничего не говорит, про то, что он загрузил этот модуль !!!?
Ниже последуют логи иксов без секции Module и с наличием в этой секции прямого указания на загрузку модуля synaptics.
судя по логу кроме загрузки модуля ничего и не происходит.
Попробуй удалить драйвер xf86-input-mouse, а то похоже он забирает /dev/psm0 раньше чем это делает xf86-input-synaptics.
Или как алтернативный вариант обратно добавить в секцию InputDevice, где указан synaptics, опцию CorePointer.
Просто, судя по логу, сервер у тя использует дефолтный InputDevice
Код: Выделить всё
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "Keyboard0"
когда на месте "<default pointer>" должен стоять "ALPS GlidePoint TouchPad", как указано в Identifier.
Я ошибся, при отсутствии в секции Module прямого указания на загрузку модуля synaptics, он всё равно загружается
при указании:
Код: Выделить всё
Section "InputDevice"
...
Driver "synaptics"
...
EndSection
Выдержки из логов( Xorg.0.log ) касающиеся synaptics:
Выдержка из Xorg.0.log с наличием в секции Module xorg.conf'а прямого указания на загрузку модуля synaptics:
Код: Выделить всё
(II) LoadModule: "synaptics"
(II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
Код: Выделить всё
(II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
Добавление опции CorePointer ничего нового не несёт.
Тобишь всё остаётся по-прежнему.
Сообщения при загрузке Иксов при наличии модуля mouse, тобишь до удаления xf86-input-mouse :
Код: Выделить всё
Query no Synaptics: 000000
(EE) ALPS GlidePoint TouchPad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "ALPS GlidePoint TouchPad"
Код: Выделить всё
(EE) Failed to load module "mouse" (module does not exist, 0)
Query no Synaptics: 000000
(EE) ALPS GlidePoint TouchPad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "ALPS GlidePoint TouchPad"
(EE) Failed to load module "mouse" (module does not exist, 0)
(EE) No input driver matching `mouse'
Удаление xf86-input-mouse принесло только неработоспособность( неподвижность ) курсорчика в Иксах:
Гость писал(а):Monarh писал(а):Код: Выделить всё
Section "InputDevice"
[...]
Option "Device" "/dev/psm0"
Option "Protocol" "auto-dev"
[...]
EndSection
а без этих опций разве не работает?
Synaptics не работает, как я наисследовал, без опций Device и Protocol.
А точнее если они не указаны или указаны не правильно, то драйвер synaptics выгружается и
загружается драйвер mouse, а уж тот всё что есть определит правильно, то есть
если
не запущен moused, то нет-ли есть-ли, а он в качестве девайса поставит /dev/psm0, а
если запущен moused, то он в качестве девайса поставит /dev/sysmouse.
А с протоколом если вообще нет, то и psm и sysmouse выставляют "Auto" и затем автоопределением
определяют протокол.
У меня для sysmouse определяется SysMouse, а
для psm определяется GlidePointPS/2.
#diff Xorg.0.log_без_указания_устройства_и_протокола_для_sysmouse _ Xorg.0.log_с_указанием_устройства_и_протокола_для_sysmouse
Код: Выделить всё
14c14
< (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 2 23:29:38 2009
---
> (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 2 22:42:48 2009
376,379c376,378
< (WW) Mouse: No Device specified, looking for one...
< (II) Mouse: Setting Device option to "/dev/sysmouse"
< (--) Mouse: Device: "/dev/sysmouse"
< (==) Mouse: Protocol: "Auto"
---
> (**) Option "Protocol" "auto"
> (**) Mouse: Device: "/dev/sysmouse"
> (**) Mouse: Protocol: "auto"
386a386
> (**) Option "Resolution" "4"
Код: Выделить всё
14c14
< (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 2 23:22:11 2009
---
> (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 2 22:06:07 2009
376,379c376,378
< (WW) Mouse: No Device specified, looking for one...
< (II) Mouse: Setting Device option to "/dev/psm0"
< (--) Mouse: Device: "/dev/psm0"
< (==) Mouse: Protocol: "Auto"
---
> (**) Option "Protocol" "GlidePointPS/2"
> (**) Mouse: Device: "/dev/psm0"
> (**) Mouse: Protocol: "GlidePointPS/2"
383a383
> (**) Option "ZAxisMapping" "4 5 6 7"
385a386,387
> (**) Option "Resolution" "4"
> (**) Mouse: Resolution: 4
392,394d393
< (II) Mouse: SetupAuto: hw.iftype is 3, hw.model is 1
< (II) Mouse: SetupAuto: protocol is GlidePointPS/2
< (II) Mouse: ps2EnableDataReporting: succeeded
Я вроде все возможные маны по мышам перечитал(moused, mouse, sysmouse, psm, synaptics, может чего еще просто не вспомнил ), а
такого( GlidePointPS/2 ) нигде не видел.
В отличии от загрузки с запущенным moused и sysmouse в качестве устройства
загрузка без moused и psm в качестве устройства, как мне кажется проходит нормально для synaptics'а
мои заключения основываются на следующем:
Содержимое xorg.conf:
Код: Выделить всё
Section "ServerFlags"
Option "AllowEmptyInput" "false"
EndSection
Section "Files"
FontPath "/usr/local/lib/X11/fonts/TTF/old_standard/"
FontPath "/usr/local/lib/X11/fonts/TTF/liberation/"
FontPath "/usr/local/lib/X11/fonts/TTF/freefont/"
FontPath "/usr/local/lib/X11/fonts/TTF/win/"
FontPath "/usr/local/lib/X11/fonts/OTF/old_standard/"
FontPath "/usr/local/lib/X11/fonts/OTF/freefont/"
FontPath "/usr/local/lib/X11/fonts/cyr-rfx/koi8-o/75dpi/"
FontPath "/usr/local/lib/X11/fonts/cyr-rfx/koi8-o/misc/"
FontPath "/usr/local/lib/X11/fonts/cyr-rfx/koi8-1/75dpi/"
FontPath "/usr/local/lib/X11/fonts/cyr-rfx/koi8-1/misc/"
FontPath "/usr/local/lib/X11/fonts/cyr-rfx/windows-1251/75dpi/"
FontPath "/usr/local/lib/X11/fonts/cyr-rfx/windows-1251/misc/"
FontPath "/usr/local/lib/X11/fonts/webfonts"
FontPath "/usr/local/lib/X11/fonts/cyrillic/"
FontPath "/usr/local/lib/X11/fonts/URW"
FontPath "/usr/local/lib/X11/fonts/freefont"
EndSection
Section "InputDevice"
Identifier "ALPS GlidePoint TouchPad"
Driver "synaptics"
Option "CorePointer"
Option "Device" "/dev/psm0"
Option "Protocol" "alps"
Option "SHMConfig" "on"
# Option "Device" "/dev/sysmouse"
# Option "Protocol" "auto"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "us,ru(winkeys)"
Option "XkbOptions" "grp:caps_toggle,grp_led:scroll"
EndSection
Section "Device"
Identifier "Card0"
Driver "nv"
EndSection
Код: Выделить всё
(EE) xf86OpenSerial: Cannot open device /dev/psm0
Device busy.
(EE) <default pointer>: cannot open input device
(EE) PreInit failed for input device "<default pointer>"
Здесь он не смог загрузить модуль mouse с дефолтными настройками и как видно из нижеприведённого лога
он выгружает модуль mouse, поскольку устройство /dev/psm0 уже занято synaptics'ом.
Если я прав, конечно.
Если не прав, поправьте.
Содержимое Xorg.0.log :
Код: Выделить всё
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.2-RELEASE amd64
Current Operating System: FreeBSD Roman.cn.ru 7.2-RELEASE FreeBSD 7.2-RELEASE #8: Sun May 31 13:56:00 NOVST 2009 root@Roman.cn.ru:/usr/obj/usr/src/sys/TURION_64_X2 amd64
Build Date: 01 June 2009 02:40:30PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 3 16:42:30 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Card0"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(**) Option "AllowEmptyInput" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/local/lib/X11/fonts/TTF/old_standard/,
/usr/local/lib/X11/fonts/TTF/liberation/,
/usr/local/lib/X11/fonts/TTF/freefont/,
/usr/local/lib/X11/fonts/TTF/win/,
/usr/local/lib/X11/fonts/OTF/old_standard/,
/usr/local/lib/X11/fonts/OTF/freefont/,
/usr/local/lib/X11/fonts/cyr-rfx/koi8-o/75dpi/,
/usr/local/lib/X11/fonts/cyr-rfx/koi8-o/misc/,
/usr/local/lib/X11/fonts/cyr-rfx/koi8-1/75dpi/,
/usr/local/lib/X11/fonts/cyr-rfx/koi8-1/misc/,
/usr/local/lib/X11/fonts/cyr-rfx/windows-1251/75dpi/,
/usr/local/lib/X11/fonts/cyr-rfx/windows-1251/misc/,
/usr/local/lib/X11/fonts/webfonts,
/usr/local/lib/X11/fonts/cyrillic/,
/usr/local/lib/X11/fonts/URW,
/usr/local/lib/X11/fonts/freefont,
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/,
built-ins
(==) ModulePath set to "/usr/local/lib/xorg/modules"
(==) |-->Input Device "ALPS GlidePoint TouchPad"
(II) No default mouse found, adding one
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "Keyboard0"
(==) No Layout section. Using the first core pointer device.
(==) No Layout section. Using the first keyboard device.
(II) Loader magic: 0x35e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 11
(--) PCI: (0@0:1:3) nVidia Corporation MCP67 Co-processor rev 162, Mem @ 0xf0600000/524288
(--) PCI:*(0@2:0:0) nVidia Corporation GeForce 8600M GS rev 161, Mem @ 0xce000000/16777216, 0xd0000000/268435456, 0xcc000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/65536
(II) System resource ranges:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nv"
(II) Loading /usr/local/lib/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.1.13
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "synaptics"
(II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "mouse"
(II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX,
GeForce 9800 GTK+, GeForce 9800 GT, Quadro FX 3700, Quadro FX 3600M,
GeForce 9600 GT, GeForce 9600 GS, GeForce 9800M GTS,
GeForce 9700M GTS, GeForce 9800M GTS, GeForce 9500 GT,
GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
GeForce 9500M G, GeForce 9300 GS, GeForce 8400 GS, GeForce 9300M GS,
GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M
(II) Primary Device is: PCI 02@00:00:0
(--) NV: Found NVIDIA GeForce 8600M GS at 02@00:00:0
(II) resource ranges after probing:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/local/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) NV(0): Initializing int10
(==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
(==) NV(0): Write-combining range (0xc0000,0x40000) was already clear
(II) NV(0): Primary V_BIOS segment is: 0xc000
(==) NV(0): Write-combining range (0x0,0x1000) was already clear
(--) NV(0): Console is VGA mode 0x3
(II) NV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(==) NV(0): Using hardware cursor
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): MMIO registers mapped at 0x802e00000
(--) NV(0): Total video RAM: 512.0 MB
(--) NV(0): BAR1 size: 256.0 MB
(--) NV(0): Mapped memory: 256.0 MB
(II) NV(0): Linear framebuffer mapped at 0x803e00000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) NV(0): Connector map:
(--) NV(0): Bus 3 -> SOR0 (LVDS)
(--) NV(0): Bus 0 -> DAC1
(--) NV(0): Bus 1 -> SOR1
(--) NV(0): Load detection: 279
(II) NV(0): I2C bus "I2C0" initialized.
(II) NV(0): Output VGA1 has no monitor section
(II) NV(0): I2C bus "I2C1" initialized.
(II) NV(0): Output DVI1 has no monitor section
(II) NV(0): LVDS native size 1440x900
(II) NV(0): Output LVDS has no monitor section
(II) NV(0): I2C bus "I2C3 (LVDS)" initialized.
(II) NV(0): Probing for EDID on I2C bus 0...
(II) NV(0): I2C device "I2C0:E-EDID segment register" registered at address 0x60.
(II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0.
(II) NV(0): ... none found
(--) NV(0): Trying load detection on VGA1 ... nothing.
(II) NV(0): Probing for EDID on I2C bus 1...
(II) NV(0): I2C device "I2C1:E-EDID segment register" registered at address 0x60.
(II) NV(0): I2C device "I2C1:ddc2" registered at address 0xA0.
(II) NV(0): ... none found
(II) NV(0): Probing for EDID on I2C bus 3...
(II) NV(0): I2C device "I2C3 (LVDS):E-EDID segment register" registered at address 0x60.
(II) NV(0): I2C device "I2C3 (LVDS):ddc2" registered at address 0xA0.
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: LPL Model: a002 Serial#: 0
(II) NV(0): Year: 2007 Week: 0
(II) NV(0): EDID Version: 1.2
(II) NV(0): Digital Display Input
(II) NV(0): Max Image Size [cm]: horiz.: 37 vert.: 23
(II) NV(0): Gamma: 2.20
(II) NV(0): No DPMS capabilities specified
(II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.590 redY: 0.349 greenX: 0.327 greenY: 0.547
(II) NV(0): blueX: 0.154 blueY: 0.138 whiteX: 0.312 whiteY: 0.328
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 88.8 MHz Image Size: 367 x 230 mm
(II) NV(0): h_active: 1440 h_sync: 1520 h_sync_end 1552 h_blank_end 1600 h_border: 0
(II) NV(0): v_active: 900 v_sync: 917 v_sync_end 923 v_blanking: 926 v_border: 0
(WW) NV(0): Unknown vendor-specific block 0
(II) NV(0): LGPhilipsLCD
(II) NV(0): LP171WP4-TLB1
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff00320c02a000000000
(II) NV(0): 00110102802517780a1c909759538c27
(II) NV(0): 23505400000001010101010101010101
(II) NV(0): 010101010101ab22a0a050841a305020
(II) NV(0): 16046fe6100000190000000000000000
(II) NV(0): 00000000000000000000000000fe004c
(II) NV(0): 475068696c6970734c43440a000000fe
(II) NV(0): 004c503137315750342d544c42310093
(II) NV(0): EDID vendor "LPL", prod id 40962
(II) NV(0): Output VGA1 disconnected
(II) NV(0): Output DVI1 disconnected
(II) NV(0): Output LVDS connected
(II) NV(0): Using exact sizes for initial modes
(II) NV(0): Output LVDS using initial mode 1440x900
(--) NV(0): Virtual size is 1440x1440 (pitch 1536)
(**) NV(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
(II) NV(0): Modeline "1440x900"x59.9 88.75 1440 1520 1552 1600 900 917 923 926 -hsync -vsync (55.5 kHz)
(==) NV(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/local/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(--) NV(0): 183.56 MB available for offscreen pixmaps
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(II) NV(0): DPMS enabled
(II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) NV(0): Setting screen physical size to 367 x 230
(II) Synaptics touchpad driver version 1.1.1
(**) Option "Device" "/dev/psm0"
(**) Option "SHMConfig" "on"
(**) Option "CorePointer"
(**) ALPS GlidePoint TouchPad: always reports core events
(II) XINPUT: Adding extended input device "ALPS GlidePoint TouchPad" (type: TOUCHPAD)
(**) ALPS GlidePoint TouchPad: (accel) keeping acceleration scheme 1
(**) ALPS GlidePoint TouchPad: (accel) filter chain progression: 2.00
(**) ALPS GlidePoint TouchPad: (accel) filter stage 0: 20.00 ms
(**) ALPS GlidePoint TouchPad: (accel) set acceleration profile 0
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/psm0"
(--) <default pointer>: Device: "/dev/psm0"
(==) <default pointer>: Protocol: "Auto"
(**) Option "AlwaysCore"
(**) <default pointer>: always reports core events
(EE) xf86OpenSerial: Cannot open device /dev/psm0
Device busy.
(EE) <default pointer>: cannot open input device
(EE) PreInit failed for input device "<default pointer>"
(II) UnloadModule: "mouse"
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us,ru(winkeys)"
(**) Keyboard0: XkbLayout: "us,ru(winkeys)"
(**) Option "XkbOptions" "grp:caps_toggle,grp_led:scroll"
(**) Keyboard0: XkbOptions: "grp:caps_toggle,grp_led:scroll"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) UnloadModule: "synaptics"
(II) UnloadModule: "kbd"
(==) NV(0): Write-combining range (0x0,0x1000) was already clear
Гость писал(а):Кстати, можно уточнить кроме тачпада ты не используешь никакие устройства для управления курсором типа ps2/usb крысы?
Нет. Никакие другие не использую. Только тачпад.
iZEN писал(а):При переходе с версии 7.0 на версию 7.2 с обновлением каталога портов нужно удалять /usr/local, /var/db/ports, /var/db/pkg, /var/run полностью, перезагружаться и устанавливать ПО заново.
А как переустановить всё ПО заново ?
Думаю всё-таки не помешает всё переустановить.
Я надеюсь не
для каждого порта
Как это сделать одной командой, последовательностью команд или какой скриптик наваять, чтобы всё разом переустановить ?
В январе-феврале я через это прошёл.
