nvidia-driver помогите поставить

[0TshEL_n1ck]

как скрипт запустить то ? он сам пропишет настройки ?

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[paradox]

смени драйвер nv на nvidia и радуйся жизни

[0TshEL_n1ck]

я это и сделал первым дело... но...

Код: Выделить всё

     (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct  2 04:00:26 2009
(==) Using config file: "/etc/X11/xorg.conf"
NVIDIA: could not open the device file /dev/nvidiactl (No such file or directory
).
(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module. Please see the
(EE) NVIDIA(0):     system's kernel log for additional error messages and
(EE) NVIDIA(0):     consult the NVIDIA README for details.
(EE) NVIDIA(0):  *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional informati
on.

giving up.
xinit:  No such file or directory (errno 2):  unable to connect to X server
xinit:  No such process (errno 3):  Server error.

я всёравно в потерях...

[0TshEL_n1ck]

С тем ключем оно поставило этот драйвер за 20 сек. по моему слишком быстро. Мож что не так лягло ? Хотя в пакетах есть...

[paradox]

NVIDIA: could not open the device file /dev/nvidiactl (No such file or directory

потому что kldstat | grep nvidia
нет модуля
kldload nvidia

[0TshEL_n1ck]

loader.conf

Код: Выделить всё

 kldload nvidia
nvidia_load="YES"

xorg.conf

Код: Выделить всё

 Driver "nvidia" 

не стартует...

[paradox]

kldload nvidia
nvidia_load="YES"

первую строчку убери

[paradox]

я вам с стотридцатый раз повторяю
kldstat | grep nvidia
есть результат? видно модуль?
нет?
значит грузите ручками
kldload и путь до модуля с модулем

[0TshEL_n1ck]

и убирал тоже, разницы никакой... не стартует.

[0TshEL_n1ck]

я вам с стотридцатый раз повторяю
kldstat | grep nvidia
есть результат? видно модуль?
нет?
значит грузите ручками
kldload и путь до модуля с модулем

результата нету, модуль не видно.
где модули лежат то ?

[paradox]

ls /boot/module/
ls /boot/kernel/

[0TshEL_n1ck]

Код: Выделить всё

 kldload /boot/modules/nvidia.ko
kldload: can't load /boot/modules/nvidia.ko: No such file or directory

хотя файл там лежит...

[paradox]

на нулевую консоль смотрите и в логdmesg на предмет ошибок
что то не правильно собралось

[0TshEL_n1ck]

ничего и не собирал, кромь хорга и иксов... сносить ? не могу розобраться, опыта маловасто (

[paradox]

нвидия у вас криво собралась
dmesg изучайте ошибку которая ругаеться nvidia.ko

[0TshEL_n1ck]

dmesg.today -

Код: Выделить всё

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Fri May  1 08:49:13 UTC 2009
    root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz (2664.79-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x106a5  Stepping = 5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x28100000<NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 8
  Logical CPUs per core: 2
real memory  = 3488284672 (3326 MB)
avail memory = 3408928768 (3251 MB)
ACPI APIC Table: <GBT    GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP/HT): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP/HT): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP/HT): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP/HT): APIC ID:  7
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <GBT GBTUACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cfdb0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> irq 16 at device 3.0 on pci0
pci2: <PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem 0xf8000000-0xf8ffffff,0xd0000000-0xdfffffff,0xf6000000-0xf7ffffff irq 16 at device 0.0 on pci2
pcib3: <PCI-PCI bridge> irq 16 at device 5.0 on pci0
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> irq 16 at device 7.0 on pci0
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> irq 16 at device 9.0 on pci0
pci5: <PCI bus> on pcib5
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xff00-0xff1f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xfe00-0xfe1f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 18 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfbffe000-0xfbffe3ff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: waiting for BIOS to give up control
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
hdac0: <Intel 82801J High Definition Audio Controller> mem 0xfbff8000-0xfbffbfff irq 22 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090329_0131
hdac0: [ITHREAD]
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci7: <ACPI PCI bus> on pcib7
atapci0: <JMicron JMB363 SATA300 controller> port 0xdf00-0xdf07,0xde00-0xde03,0xdd00-0xdd07,0xdc00-0xdc03,0xdb00-0xdb0f mem 0xfbdfe000-0xfbdfffff irq 17 at devic
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci8: <ACPI PCI bus> on pcib8
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xce00-0xceff mem 0xfbeff000-0xfbefffff,0xfbef8000-0xfbefbfff irq 16 a
re0: Using 1 MSI messages
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:24:1d:77:4f:ed
re0: [FILTER]
uhci3: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 23 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 19 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xfa00-0xfa1f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfbffd000-0xfbffd3ff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: waiting for BIOS to give up control
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci9: <ACPI PCI bus> on pcib9
fwohci0: <Texas Instruments TSB43AB23> mem 0xfbcff000-0xfbcff7ff,0xfbcf8000-0xfbcfbfff irq 18 at device 6.0 on pci9
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:79:86:ed:00:00:24:1d
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:79:86:00:24:1d
fwe0: Ethernet address: 02:79:86:00:24:1d
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:79:86:ed:00:00:24:1d @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1084000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH10 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f,0xf800-0xf80f at device 31.2 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH10 SATA300 controller> port 0xf600-0xf607,0xf500-0xf503,0xf400-0xf407,0xf300-0xf303,0xf200-0xf20f,0xf100-0xf10f irq 19 at device 31.5 on pci0
atapci2: [ITHREAD]
ata5: <ATA channel 0> on atapci2
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci2
ata6: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acd0: DVDR <Optiarc DVD RW AD-7170S/1.00> at ata0-master SATA150
ad1: 953868MB <SAMSUNG HD103UJ 1AA01113> at ata0-slave SATA300
ad8: 114472MB <WDC WD1200BB-00DWA0 15.05R15> at ata4-master UDMA100
ad10: 953868MB <Seagate ST31000528AS CC34> at ata5-master SATA300
hdac0: HDA Codec #2: Realtek ALC885
pcm0: <HDA Realtek ALC885 PCM #0 Analog> at cad 2 nid 1 on hdac0
pcm1: <HDA Realtek ALC885 PCM #1 Analog> at cad 2 nid 1 on hdac0
pcm2: <HDA Realtek ALC885 PCM #2 Digital> at cad 2 nid 1 on hdac0
GEOM_LABEL: Label for provider ad8s1a is ufsid/4ac154ade2761fc7.
GEOM_LABEL: Label for provider ad8s1d is ufsid/4ac154b2250fb5ac.
GEOM_LABEL: Label for provider ad8s1e is ufsid/4ac154ae4e1d9d3a.
GEOM_LABEL: Label for provider ad8s1f is ufsid/4ac154ae30f6be48.
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #5 Launched!
Trying to mount root from ufs:/dev/ad8s1a
GEOM_LABEL: Label ufsid/4ac154ade2761fc7 removed.
GEOM_LABEL: Label for provider ad8s1a is ufsid/4ac154ade2761fc7.
GEOM_LABEL: Label ufsid/4ac154ae4e1d9d3a removed.
GEOM_LABEL: Label for provider ad8s1e is ufsid/4ac154ae4e1d9d3a.
GEOM_LABEL: Label ufsid/4ac154ae30f6be48 removed.
GEOM_LABEL: Label for provider ad8s1f is ufsid/4ac154ae30f6be48.
GEOM_LABEL: Label ufsid/4ac154b2250fb5ac removed.
GEOM_LABEL: Label for provider ad8s1d is ufsid/4ac154b2250fb5ac.
GEOM_LABEL: Label ufsid/4ac154ade2761fc7 removed.
GEOM_LABEL: Label ufsid/4ac154ae4e1d9d3a removed.
GEOM_LABEL: Label ufsid/4ac154ae30f6be48 removed.
GEOM_LABEL: Label ufsid/4ac154b2250fb5ac removed.

[0TshEL_n1ck]

пробую пересобрать нвидиа,
устанавливаетья на подозрение очень бьыстро. когда убираю строчку в мейк конфе то опять та же ошибка...

[cloudsv]

попробуй

Код: Выделить всё

portsnap fetch update

Код: Выделить всё

cd /usr/ports/x11/nvidia-driver/
make config

убрать оттуда все кресты

Код: Выделить всё

[ ] FREEBSD_AGP  Use FreeBSD AGP GART driver                  ? ?
[ ] ACPI         Enable support for ACPI Power Management     ? ?
[ ] LINUX        Build with support for Linux compatibility 

ну и

Код: Выделить всё

make clean
make install clean

если соберется попробывать

Код: Выделить всё

kldload nvidia

[Gamerman]

Вообщем борюсь, не могу победить...
Устанавливаю с портов /usr/ports/x11/nvidiadriver
Помогите побороть, ато с иксами без нормально работающей видяхи не поработаеш ) Медленновато очень

Вы не ошиблись с портом?
У меня есть только /usr/ports/x11/nvidia-driver

[0TshEL_n1ck]

Вообщем борюсь, не могу победить...
Устанавливаю с портов /usr/ports/x11/nvidiadriver
Помогите побороть, ато с иксами без нормально работающей видяхи не поработаеш ) Медленновато очень

Вы не ошиблись с портом?
У меня есть только /usr/ports/x11/nvidia-driver

Не ошибся, просто руками набирал, дефис не поставил.

[0TshEL_n1ck]

Выдаёт тоже самое и не собирается...

[Pattern]

пошел другим путём, решил установить с пакета, соответственно скачал с сайта производителя драйвер для фри
NVIDIA-FreeBSD-x86-185.18.36.tar.gz

Код: Выделить всё

 pkg_add NVIDIA-FreeBSD-x86-185.18.36.tar.gz 
...

Не понял, зачем pkg_add? Это же не пакет. Кста, что он и написал вам

...
tar: +CONTENTS: Not found in archive
tar: Error exit delayed from previous errors.
pkg_add: tar extract of /usr/home/zef/Download/NVIDIA-FreeBSD-x86-185.18.36.tar.gz failed!
pkg_add: unable to extract table of contents file from '/usr/home/zef/Download/NVIDIA-FreeBSD-x86-185.18.36.tar.gz' - not a package?

Код: Выделить всё

$ tar zxvf NVIDIA-FreeBSD-x86-185.18.36.tar.gz
$ cd NVIDIA-FreeBSD-x86-185.18.36

Теперь ищем README или INSTALL файл, читаем и ставим как написано
А вот почему не собирается из портов - не совсем понятно.
Дерево давно обновляли? Ошибка указаная в первом посте такая же?

[0TshEL_n1ck]

ошибка такая же, через cvsup обновлялся - свежее некуда.

[0TshEL_n1ck]

Может попробовать ХОРГ пересобрать ? Поставлю абсолютно все галочки, мож какого нить модуля не хватает ? Как считаете ?

[paradox]

шо бы мозг &^(*^(*&&*(*
у вас kldload nvidia.ko не загружаеться
с иксами итд все увас нормально