Xorg и hald

FreeBSD и прочие в роли десктопа.
Правила форума
Убедительная просьба юзать теги [code] при оформлении листингов.
Сообщения не оформленные должным образом имеют все шансы быть незамеченными.
badtrips
ефрейтор
Сообщения: 62
Зарегистрирован: 2009-08-26 4:34:15

Xorg и hald

Непрочитанное сообщение badtrips » 2009-09-16 9:17:43

Граждане!Процессы Xorg и hald почему хаваю очень много процессора.И начинает даже мышка лагать.с этим можно что то сделать?стоит xfce.

Хостинговая компания Host-Food.ru
Хостинг HostFood.ru
 

Услуги хостинговой компании Host-Food.ru

Хостинг HostFood.ru

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

badtrips
ефрейтор
Сообщения: 62
Зарегистрирован: 2009-08-26 4:34:15

Re: Xorg и hald

Непрочитанное сообщение badtrips » 2009-09-16 9:22:02

если вообще ничего не делать такой "завис" происходит с переодичностью 20 сек.если при этом ещё и работать то чаще.

Аватара пользователя
iZEN
ст. лейтенант
Сообщения: 1095
Зарегистрирован: 2007-09-15 16:45:26
Контактная информация:

Re: Xorg и hald

Непрочитанное сообщение iZEN » 2009-09-16 9:41:30

Собираю Xorg без HAL. Не лагает.
GNU/Linux — это не Unix и даже никогда им не был, и, что самое смешное, никогда им не станет — GNU's Not Unix

Аватара пользователя
Alex Keda
стреляли...
Сообщения: 35426
Зарегистрирован: 2004-10-18 14:25:19
Откуда: Made in USSR
Контактная информация:

Re: Xorg и hald

Непрочитанное сообщение Alex Keda » 2009-09-16 10:24:05

собираю с халом. не лагает.
тредстартеру - кроме словесных расказов - чёнить покажите из системы...
Убей их всех! Бог потом рассортирует...

badtrips
ефрейтор
Сообщения: 62
Зарегистрирован: 2009-08-26 4:34:15

Re: Xorg и hald

Непрочитанное сообщение badtrips » 2009-09-16 10:32:59

а что именно показать?я мигрировал недавно и не всё знаю.)сейчас на работе в техподдержке сижу и работается с трудом =(

badtrips
ефрейтор
Сообщения: 62
Зарегистрирован: 2009-08-26 4:34:15

Re: Xorg и hald

Непрочитанное сообщение badtrips » 2009-09-16 13:21:04

нет,hald тут не при чём совершенно.либо у моего бука недостаточно мощности для x-ов. либо мне как то его нужно настраивать.в общем как только я начинаю что то делать(менять размер окошек,или в браузере листать страницы) то в top видно что загрузка Xorg взлетает до небес и всё начинает тормозить.вот...если я полезу читать про конфигурирование Xorg это как то мне поможет?или можно забыть про freebsd+xfce.С такими тормозами всё ткаи неприятно.

Аватара пользователя
Alex Keda
стреляли...
Сообщения: 35426
Зарегистрирован: 2004-10-18 14:25:19
Откуда: Made in USSR
Контактная информация:

Re: Xorg и hald

Непрочитанное сообщение Alex Keda » 2009-09-16 13:32:46

Код: Выделить всё

xdriinfo
для начала

Код: Выделить всё

pciconf -lv
касабельно видеокарты и XOrg.0.log - опционально
Убей их всех! Бог потом рассортирует...

badtrips
ефрейтор
Сообщения: 62
Зарегистрирован: 2009-08-26 4:34:15

Re: Xorg и hald

Непрочитанное сообщение badtrips » 2009-09-16 13:49:37

Код: Выделить всё

badtrips# xdriinfo
Screen 0: i965

Код: Выделить всё

badtrips# pciconf -lv
hostb0@pci0:0:0:0:	class=0x060000 card=0x01361025 chip=0x2a008086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile PM965/GM965/GL960 Express Processor to DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
vgapci0@pci0:0:2:0:	class=0x030000 card=0x01361025 chip=0x2a028086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile 965 Express Integrated Graphics Controller'
    class      = display
    subclass   = VGA
vgapci1@pci0:0:2:1:	class=0x038000 card=0x01361025 chip=0x2a038086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile 965 Express Integrated Graphics Controller'
    class      = display
uhci0@pci0:0:26:0:	class=0x0c0300 card=0x01361025 chip=0x28348086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
uhci1@pci0:0:26:1:	class=0x0c0300 card=0x01361025 chip=0x28358086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:26:7:	class=0x0c0320 card=0x01361025 chip=0x283a8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '81EC1043 (?) ICH8 Enhanced USB2 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
hdac0@pci0:0:27:0:	class=0x040300 card=0x01361025 chip=0x284b8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H &SUBSYS_81EC1043&REV_02\3&11583659&0&D8'
    class      = multimedia
    subclass   = HDA
pcib1@pci0:0:28:0:	class=0x060400 card=0x01361025 chip=0x283f8086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:0:28:1:	class=0x060400 card=0x01361025 chip=0x28418086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 2'
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:0:28:2:	class=0x060400 card=0x01361025 chip=0x28438086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 3'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:0:28:3:	class=0x060400 card=0x01361025 chip=0x28458086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 4'
    class      = bridge
    subclass   = PCI-PCI
uhci2@pci0:0:29:0:	class=0x0c0300 card=0x01361025 chip=0x28308086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
uhci3@pci0:0:29:1:	class=0x0c0300 card=0x01361025 chip=0x28318086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
uhci4@pci0:0:29:2:	class=0x0c0300 card=0x01361025 chip=0x28328086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
ehci1@pci0:0:29:7:	class=0x0c0320 card=0x01361025 chip=0x28368086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB2 EHCI'
    class      = serial bus
    subclass   = USB
pcib5@pci0:0:30:0:	class=0x060401 card=0x01361025 chip=0x24488086 rev=0xf3 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:	class=0x060100 card=0x01361025 chip=0x28158086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'ICH8M-E (ICH8 Family) LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
atapci0@pci0:0:31:1:	class=0x01018a card=0x01361025 chip=0x28508086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) Ultra ATA Storage Controllers'
    class      = mass storage
    subclass   = ATA
atapci1@pci0:0:31:2:	class=0x01018f card=0x01361025 chip=0x28288086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'ICH8M (ICH8 Family) 3 port SATA Controller'
    class      = mass storage
    subclass   = ATA
none0@pci0:0:31:3:	class=0x0c0500 card=0x01361025 chip=0x283e8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) SMBus Controller'
    class      = serial bus
    subclass   = SMBus
bge0@pci0:5:0:0:	class=0x020000 card=0x01361025 chip=0x171314e4 rev=0x02 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'NetLink BCM5906M Fast Ethernet PCIe'
    class      = network
    subclass   = ethernet
none1@pci0:6:0:0:	class=0x028000 card=0x04221468 chip=0x431114e4 rev=0x01 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'Dell Wireless 1390 WLAN Mini-PCI Card'
    class      = network
badtrips# pciconf -lv
hostb0@pci0:0:0:0:	class=0x060000 card=0x01361025 chip=0x2a008086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile PM965/GM965/GL960 Express Processor to DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
vgapci0@pci0:0:2:0:	class=0x030000 card=0x01361025 chip=0x2a028086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile 965 Express Integrated Graphics Controller'
    class      = display
    subclass   = VGA
vgapci1@pci0:0:2:1:	class=0x038000 card=0x01361025 chip=0x2a038086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile 965 Express Integrated Graphics Controller'
    class      = display
uhci0@pci0:0:26:0:	class=0x0c0300 card=0x01361025 chip=0x28348086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
uhci1@pci0:0:26:1:	class=0x0c0300 card=0x01361025 chip=0x28358086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:26:7:	class=0x0c0320 card=0x01361025 chip=0x283a8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '81EC1043 (?) ICH8 Enhanced USB2 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
hdac0@pci0:0:27:0:	class=0x040300 card=0x01361025 chip=0x284b8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H &SUBSYS_81EC1043&REV_02\3&11583659&0&D8'
    class      = multimedia
    subclass   = HDA
pcib1@pci0:0:28:0:	class=0x060400 card=0x01361025 chip=0x283f8086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:0:28:1:	class=0x060400 card=0x01361025 chip=0x28418086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 2'
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:0:28:2:	class=0x060400 card=0x01361025 chip=0x28438086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 3'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:0:28:3:	class=0x060400 card=0x01361025 chip=0x28458086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 4'
    class      = bridge
    subclass   = PCI-PCI
uhci2@pci0:0:29:0:	class=0x0c0300 card=0x01361025 chip=0x28308086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
uhci3@pci0:0:29:1:	class=0x0c0300 card=0x01361025 chip=0x28318086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
uhci4@pci0:0:29:2:	class=0x0c0300 card=0x01361025 chip=0x28328086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI'
    class      = serial bus
    subclass   = USB
ehci1@pci0:0:29:7:	class=0x0c0320 card=0x01361025 chip=0x28368086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB2 EHCI'
    class      = serial bus
    subclass   = USB
pcib5@pci0:0:30:0:	class=0x060401 card=0x01361025 chip=0x24488086 rev=0xf3 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:	class=0x060100 card=0x01361025 chip=0x28158086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'ICH8M-E (ICH8 Family) LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
atapci0@pci0:0:31:1:	class=0x01018a card=0x01361025 chip=0x28508086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) Ultra ATA Storage Controllers'
    class      = mass storage
    subclass   = ATA
atapci1@pci0:0:31:2:	class=0x01018f card=0x01361025 chip=0x28288086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'ICH8M (ICH8 Family) 3 port SATA Controller'
    class      = mass storage
    subclass   = ATA
none0@pci0:0:31:3:	class=0x0c0500 card=0x01361025 chip=0x283e8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) SMBus Controller'
    class      = serial bus
    subclass   = SMBus
bge0@pci0:5:0:0:	class=0x020000 card=0x01361025 chip=0x171314e4 rev=0x02 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'NetLink BCM5906M Fast Ethernet PCIe'
    class      = network
    subclass   = ethernet
none1@pci0:6:0:0:	class=0x028000 card=0x04221468 chip=0x431114e4 rev=0x01 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'Dell Wireless 1390 WLAN Mini-PCI Card'
    class      = network

Код: Выделить всё

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.2-PRERELEASE i386 
Current Operating System: FreeBSD badtrips 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May  1 08:49:13 UTC 2009     root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
Build Date: 22 April 2009  02:40:51PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 16 14:08:23 2009
(II) Loader magic: 0x6a0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0x94000000/1048576, 0x80000000/268435456, I/O @ 0x00005110/8, BIOS @ 0x????????/65536
(--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3
(==) Using default built-in configuration (39 lines)
(==) --- Start of built-in configuration ---
	Section "Device"
		Identifier	"Builtin Default intel Device 0"
		Driver	"intel"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default intel Screen 0"
		Device	"Builtin Default intel Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default i810 Device 0"
		Driver	"i810"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default i810 Screen 0"
		Device	"Builtin Default i810 Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vesa Device 0"
		Driver	"vesa"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vesa Screen 0"
		Device	"Builtin Default vesa Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default fbdev Device 0"
		Driver	"fbdev"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default fbdev Screen 0"
		Device	"Builtin Default fbdev Device 0"
	EndSection
	Section "ServerLayout"
		Identifier	"Builtin Default Layout"
		Screen	"Builtin Default intel Screen 0"
		Screen	"Builtin Default i810 Screen 0"
		Screen	"Builtin Default vesa Screen 0"
		Screen	"Builtin Default fbdev Screen 0"
	EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default i810 Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default i810 Device 0"
(==) No monitor specified for screen "Builtin Default i810 Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (3)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	built-ins
(==) ModulePath set to "/usr/local/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) System resource ranges:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/local/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 2.6.3
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "i810"
(II) Loading /usr/local/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 2.6.3
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) UnloadModule: "i810"
(II) Unloading /usr/local/lib/xorg/modules/drivers//i810_drv.so
(II) Failed to load module "i810" (already loaded, 2)
(II) LoadModule: "vesa"
(II) Loading /usr/local/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 2.1.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
	965GM, 965GME/GLE, G33, Q35, Q33,
	Mobile Intel® GM45 Express Chipset,
	Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[4] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[5] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[9] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/local/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Creating default Display subsection in Screen section
	"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0x80000000
(--) intel(0): IO registers at addr 0x94000000
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LPL", prod id 57600
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): EDID vendor "LPL", prod id 57600
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/local/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 2.4.0
	ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000203 to 0x00000207
(WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000206 to 0x80000206
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x100000c0 to 0x000c00c0
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00404000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710087
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x6b405140
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(II) UnloadModule: "vesa"
(II) Unloading /usr/local/lib/xorg/modules/drivers//vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[4] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[5] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[9] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 491520 total, 0 used
(II) intel(0): I830CheckAvailableMemory: 1966080 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0x94000000
(II) intel(0): [drm] ring buffer = 0x80000000
(II) intel(0): [drm] mapped front buffer at 0x8012b000, handle = 0x8012b000
(II) intel(0): [drm] mapped back buffer at 0x81a2c000, handle = 0x81a2c000
(II) intel(0): [drm] mapped depth buffer at 0x8206c000, handle = 0x8206c000
(II) intel(0): [drm] mapped classic textures at 0x826ac000, handle = 0x826ac000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) EXA(0): Offscreen pixmap area of 19660800 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): Disable render standby.
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0077f000 (pgoffset 1919)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01a2b000 (pgoffset 6699)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01a2c000 (pgoffset 6700)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x0206c000 (pgoffset 8300)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x026ac000 (pgoffset 9900)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00129fff: fake bufmgr (1024 kB)
(II) intel(0): 0x0012a000-0x0012afff: overlay registers (4 kB)
(II) intel(0): 0x0012b000-0x0076afff: front buffer (6400 kB)
(II) intel(0): 0x0076b000-0x01a2afff: exa offscreen (19200 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x01a2b000-0x01a2bfff: power context (4 kB)
(II) intel(0): 0x01a2c000-0x0206bfff: back buffer (6400 kB)
(II) intel(0): 0x0206c000-0x026abfff: depth buffer (6400 kB)
(II) intel(0): 0x026ac000-0x046abfff: classic textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: XF86DRI Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device USB Mouse
(II) LoadModule: "mouse"
(II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.4.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) USB Mouse: Device: "/dev/sysmouse"
(==) USB Mouse: Protocol: "Auto"
(**) USB Mouse: always reports core events
(**) Option "Device" "/dev/sysmouse"
(==) USB Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) USB Mouse: ZAxisMapping: buttons 4 and 5
(**) USB Mouse: Buttons: 9
(**) USB Mouse: Sensitivity: 1
(II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
(**) USB Mouse: (accel) keeping acceleration scheme 1
(**) USB Mouse: (accel) filter chain progression: 2.00
(**) USB Mouse: (accel) filter stage 0: 20.00 ms
(**) USB Mouse: (accel) set acceleration profile 0
(II) USB Mouse: SetupAuto: hw.iftype is 4, hw.model is 0
(II) USB Mouse: SetupAuto: protocol is SysMouse
(II) config/hal: Adding input device AT Keyboard
(II) LoadModule: "kbd"
(II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) AT Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) AT Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "base"
(**) AT Keyboard: XkbRules: "base"
(**) Option "XkbModel" "pc105"
(**) AT Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "us,ru"
(**) AT Keyboard: XkbLayout: "us,ru"
(**) Option "XkbVariant" ",winkeys"
(**) AT Keyboard: XkbVariant: ",winkeys"
(**) Option "XkbOptions" "grp:ctrl_shift_toggle,grp_ led:scroll"
(**) AT Keyboard: XkbOptions: "grp:ctrl_shift_toggle,grp_ led:scroll"
(**) Option "CustomKeycodes" "off"
(**) AT Keyboard: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "AT Keyboard" (type: KEYBOARD)
(II) config/hal: Adding input device PS/2 Mouse
(**) PS/2 Mouse: Device: "/dev/psm0"
(==) PS/2 Mouse: Protocol: "Auto"
(**) PS/2 Mouse: always reports core events
(**) Option "Device" "/dev/psm0"
(==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: Buttons: 9
(**) PS/2 Mouse: Sensitivity: 1
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(**) PS/2 Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Mouse: (accel) set acceleration profile 0
(II) PS/2 Mouse: SetupAuto: hw.iftype is 3, hw.model is 4
(II) PS/2 Mouse: SetupAuto: protocol is IMPS/2
(II) PS/2 Mouse: ps2EnableDataReporting: succeeded
(II) intel(0): EDID vendor "LPL", prod id 57600
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 57600
(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x046ac000 (pgoffset 18092)
(II) intel(0): xf86UnbindGARTMemory: unbind key 6
(II) intel(0): EDID vendor "LPL", prod id 57600
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 57600
(II) intel(0): xf86BindGARTMemory: bind key 7 at 0x046ac000 (pgoffset 18092)
(II) intel(0): xf86UnbindGARTMemory: unbind key 7
(II) 3rd Button detected: disabling emulate3Button
exaCopyDirty: Pending damage region empty!

Аватара пользователя
Alex Keda
стреляли...
Сообщения: 35426
Зарегистрирован: 2004-10-18 14:25:19
Откуда: Made in USSR
Контактная информация:

Re: Xorg и hald

Непрочитанное сообщение Alex Keda » 2009-09-16 14:38:59

поставьте порт

Код: Выделить всё

/usr/ports/graphics/mesa-demos/
если не стоит, и запустите

Код: Выделить всё

glxgears
интересует строк пять что он выплюнет....
а вообще - почитайте тут: http://forums.freebsd.org/showthread.php?t=6382
там есть кое-какие рекомендации.
=======
тем не менее - дрова интеловые поломали. если есть реальная необходимость постоянно работать на этой машине - рекомендую поставить чё-то типа 6.2 релиза и тамошние ксорг/кде
разница в скорости работы - земля и небо...
Убей их всех! Бог потом рассортирует...

badtrips
ефрейтор
Сообщения: 62
Зарегистрирован: 2009-08-26 4:34:15

Re: Xorg и hald

Непрочитанное сообщение badtrips » 2009-09-16 17:21:28

колёсики крутилися)

Код: Выделить всё

badtrips# glxgears
Failed to initialize GEM.  Falling back to classic.
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
229 frames in 5.0 seconds = 45.669 FPS
309 frames in 5.0 seconds = 61.775 FPS
309 frames in 5.0 seconds = 61.775 FPS
307 frames in 5.0 seconds = 61.375 FPS
17352 frames in 5.0 seconds = 3470.358 FPS
44720 frames in 5.0 seconds = 8943.891 FPS
31944 frames in 6.9 seconds = 4655.606 FPS
26499 frames in 5.0 seconds = 5299.704 FPS
32974 frames in 5.0 seconds = 6594.672 FPS

badtrips
ефрейтор
Сообщения: 62
Зарегистрирован: 2009-08-26 4:34:15

Re: Xorg и hald

Непрочитанное сообщение badtrips » 2009-09-16 18:01:10

в общем он до 9 тысяч доходит...
и вопрос - если ставить что то из старых релизов - то до 6.2 включительно?

Аватара пользователя
Alex Keda
стреляли...
Сообщения: 35426
Зарегистрирован: 2004-10-18 14:25:19
Откуда: Made in USSR
Контактная информация:

Re: Xorg и hald

Непрочитанное сообщение Alex Keda » 2009-09-16 19:23:37

непонял....

Код: Выделить всё

32974 frames in 5.0 seconds = 6594.672 FPS
такого я никогда не видел. вообще больше пары тыщщ не видел никогда...
ссылку читали? тюнить пробовали?
========
насколько я помню - у меня интел пару лет назад работал нормально.
ксорг тогда был 7.1 или 7.0
на 7.2 уже точно сломали...
Убей их всех! Бог потом рассортирует...

badtrips
ефрейтор
Сообщения: 62
Зарегистрирован: 2009-08-26 4:34:15

Re: Xorg и hald

Непрочитанное сообщение badtrips » 2009-09-16 22:01:55

ссылку бы я прочитал если бы чёрт бы меня не дёрнул 10 лет назад выбрать в качестве профильного французский язык)спасибо за помощь. :smile:
и что значит - сломали?сделали хуже?или "тяжелее"?

Аватара пользователя
Alex Keda
стреляли...
Сообщения: 35426
Зарегистрирован: 2004-10-18 14:25:19
Откуда: Made in USSR
Контактная информация:

Re: Xorg и hald

Непрочитанное сообщение Alex Keda » 2009-09-16 22:32:18

значит сломали...
раньше - года два назад, может полтора ещё - самые беспроблемные дрова были.
цеплялись влёт, ускорение искаропки работало, всё отлично просто...
а щас - тихий ужас.
=======
кабы не бук был - я бы AMD|ATI присоветовал. последний год - они самые беспроблемные.
Убей их всех! Бог потом рассортирует...

badtrips
ефрейтор
Сообщения: 62
Зарегистрирован: 2009-08-26 4:34:15

Re: Xorg и hald

Непрочитанное сообщение badtrips » 2009-09-16 23:27:51

ммм...у меня ещё один вопрос есть...все те пакеты которые я собирал и которые были скажем собраны с ошибками,где все они лежат?у меня так быстро из 11 гигов только 7 осталось свободных.как не захламлять систему ?

ооо...поставил fluxbox...шустрый...хотя в нём тоже подзависы есть небольшие.

Аватара пользователя
Alex Keda
стреляли...
Сообщения: 35426
Зарегистрирован: 2004-10-18 14:25:19
Откуда: Made in USSR
Контактная информация:

Re: Xorg и hald

Непрочитанное сообщение Alex Keda » 2009-09-17 7:59:31

Код: Выделить всё

find /usr/ports -name work -type d -exec rm -rf {} \;
думаю освободит сколько-то места...
Убей их всех! Бог потом рассортирует...

badtrips
ефрейтор
Сообщения: 62
Зарегистрирован: 2009-08-26 4:34:15

Re: Xorg и hald

Непрочитанное сообщение badtrips » 2009-09-17 12:01:34

я никак не могу сделать так что бы при входе обычного пользователя(он в группе wheel) fluxbox запускался автоматом.для root это работает(в .login я ему прописал startx и в .xinitrc путь к fluxbox).для пользователя прописал то же самое.для .xinitrc сделал в папке пользователя chmod 555.в общем fluxbox запускается для пользователя badtrips только по startx.на что ещё нужно поставить соответствующие права?

Аватара пользователя
Alex Keda
стреляли...
Сообщения: 35426
Зарегистрирован: 2004-10-18 14:25:19
Откуда: Made in USSR
Контактная информация:

Re: Xorg и hald

Непрочитанное сообщение Alex Keda » 2009-09-17 12:03:53

покажите что куда прописали
Убей их всех! Бог потом рассортирует...

badtrips
ефрейтор
Сообщения: 62
Зарегистрирован: 2009-08-26 4:34:15

Re: Xorg и hald

Непрочитанное сообщение badtrips » 2009-09-17 12:18:35

Код: Выделить всё

more .xinitrc
exec /usr/local/bin/fluxbox

Код: Выделить всё

more .login
startx

Аватара пользователя
Alex Keda
стреляли...
Сообщения: 35426
Зарегистрирован: 2004-10-18 14:25:19
Откуда: Made in USSR
Контактная информация:

Re: Xorg и hald

Непрочитанное сообщение Alex Keda » 2009-09-17 12:23:06

Код: Выделить всё

grep user /etc/passwd
Убей их всех! Бог потом рассортирует...

badtrips
ефрейтор
Сообщения: 62
Зарегистрирован: 2009-08-26 4:34:15

Re: Xorg и hald

Непрочитанное сообщение badtrips » 2009-09-17 20:06:44

вывод не могу показать так как копирование пока что не функционирует,тока если вывод в файл сделать,но там тогда весь passwd вставляется...
и никак не получается переключение раскладки настроить.xxkb с ошибкой компилиться.но поставился по pkg_add.и не запускается(

Код: Выделить всё

Unable to get a default value for the required resource 'XXkb.mainwindow.type'

badtrips
ефрейтор
Сообщения: 62
Зарегистрирован: 2009-08-26 4:34:15

Re: Xorg и hald

Непрочитанное сообщение badtrips » 2009-09-17 21:03:47

passwd

Код: Выделить всё

# $FreeBSD: src/etc/master.passwd,v 1.40.20.1 2009/04/15 03:14:26 kensmith Exp $
#
root:*:0:0:Charlie &:/root:/bin/csh
toor:*:0:0:Bourne-again Superuser:/root:
daemon:*:1:1:Owner of many system processes:/root:/usr/sbin/nologin
operator:*:2:5:System &:/:/usr/sbin/nologin
bin:*:3:7:Binaries Commands and Source:/:/usr/sbin/nologin
tty:*:4:65533:Tty Sandbox:/:/usr/sbin/nologin
kmem:*:5:65533:KMem Sandbox:/:/usr/sbin/nologin
games:*:7:13:Games pseudo-user:/usr/games:/usr/sbin/nologin
news:*:8:8:News Subsystem:/:/usr/sbin/nologin
man:*:9:9:Mister Man Pages:/usr/share/man:/usr/sbin/nologin
sshd:*:22:22:Secure Shell Daemon:/var/empty:/usr/sbin/nologin
smmsp:*:25:25:Sendmail Submission User:/var/spool/clientmqueue:/usr/sbin/nologin
mailnull:*:26:26:Sendmail Default User:/var/spool/mqueue:/usr/sbin/nologin
bind:*:53:53:Bind Sandbox:/:/usr/sbin/nologin
proxy:*:62:62:Packet Filter pseudo-user:/nonexistent:/usr/sbin/nologin
_pflogd:*:64:64:pflogd privsep user:/var/empty:/usr/sbin/nologin
_dhcp:*:65:65:dhcp programs:/var/empty:/usr/sbin/nologin
uucp:*:66:66:UUCP pseudo-user:/var/spool/uucppublic:/usr/local/libexec/uucp/uucico
pop:*:68:6:Post Office Owner:/nonexistent:/usr/sbin/nologin
www:*:80:80:World Wide Web Owner:/nonexistent:/usr/sbin/nologin
nobody:*:65534:65534:Unprivileged user:/nonexistent:/usr/sbin/nologin
messagebus:*:556:556:D-BUS Daemon User:/nonexistent:/sbin/nologin
polkit:*:562:562:PolicyKit Daemon User:/nonexistent:/sbin/nologin
haldaemon:*:560:560:HAL Daemon User:/nonexistent:/sbin/nologin
badtrips:*:1001:0:User &:/home/badtrips:/bin/sh
avahi:*:558:558:Avahi Daemon User:/nonexistent:/sbin/nologin

Аватара пользователя
Alex Keda
стреляли...
Сообщения: 35426
Зарегистрирован: 2004-10-18 14:25:19
Откуда: Made in USSR
Контактная информация:

Re: Xorg и hald

Непрочитанное сообщение Alex Keda » 2009-09-17 23:21:09

Код: Выделить всё

badtrips:*:1001:0:User &:/home/badtrips:/bin/sh
ты? шелл смени.
Убей их всех! Бог потом рассортирует...

badtrips
ефрейтор
Сообщения: 62
Зарегистрирован: 2009-08-26 4:34:15

Re: Xorg и hald

Непрочитанное сообщение badtrips » 2009-09-18 8:12:20

а на какой?..

Аватара пользователя
Alex Keda
стреляли...
Сообщения: 35426
Зарегистрирован: 2004-10-18 14:25:19
Откуда: Made in USSR
Контактная информация:

Re: Xorg и hald

Непрочитанное сообщение Alex Keda » 2009-09-18 8:17:28

а у кого из пользователей машины всё работает нормально?
=======
ребят, вы думать совсем уже разучились чтоли?
Убей их всех! Бог потом рассортирует...