Страница 1 из 1

Скрипт для Postfix и Exchenge

Добавлено: 2013-12-05 21:45:54
Mvairs
Не уверен что нужный раздел, возможно теме лучше быть в MTA
Представлюсь
uname -a

Код: Выделить всё

FreeBSD 9.2-RELEASE
Есть не без известный скрипт,
getadsmtp.pl, сам скрипт взять с боевого сервера и там отрабатывает нормально. Там стоит FreeBSD 6.2 но уверен что это вообще играет роль о_О
Когда использую скрипт все проходит нормально, нету ошибок, но и файл пустой всегда =\
Возможно в новых версиях Перл или лдап что то поменялось ? о_о
pkg_info | grep perl

Код: Выделить всё

p5-perl-ldap-0.5700
perl5-5.16.3_2
/usr/bin/ ll

Код: Выделить всё

-r-x------   1  root wheel       getadsmtp.pl

Код: Выделить всё

#!/usr/bin/perl -T -w
 
# This script will pull all users' SMTP addresses from your Active Directory
# (including primary and secondary email addresses) and list them in the
# format "user@example.com OK" which Postfix uses with relay_recipient_maps.
# Be sure to double-check the path to perl above.
 
# This requires Net::LDAP to be installed.  To install Net::LDAP, at a shell
# type "perl -MCPAN -e shell" and then "install Net::LDAP"
 
use Net::LDAP;
use Net::LDAP::Control::Paged;
use Net::LDAP::Constant ( "LDAP_CONTROL_PAGED" );
 
# Enter the path/file for the output
$VALID = "/etc/postfix/relay_recipients";
open VALID, ">$VALID" or die "CANNOT OPEN $VALID $!";
 
# Enter the FQDN of your Active Directory domain controllers below
$dc1="domaincontroller1.example.com";
$dc2="domaincontroller2.example.com";
 
# Enter the LDAP container for your userbase.
# The syntax is CN=Users,dc=example,dc=com
# This can be found by installing the Windows 2000 Support Tools
# then running ADSI Edit.
# In ADSI Edit, expand the "Domain NC [domaincontroller1.example.com]" &
# you will see, for example, DC=example,DC=com (this is your base).
# The Users Container will be specified in the right pane as
# CN=Users depending on your schema (this is your container).
# You can double-check this by clicking "Properties" of your user
# folder in ADSI Edit and examining the "Path" value, such as:
# LDAP://domaincontroller1.example.com/CN=Users,DC=example,DC=com
# which would be $hqbase="cn=Users,dc=example,dc=com"
# Note:  You can also use just $hqbase="dc=example,dc=com"
$hqbase="cn=Users,dc=example,dc=com";
 
# Enter the username & password for a valid user in your Active Directory
# with username in the form cn=username,cn=Users,dc=example,dc=com
# Make sure the user's password does not expire.  Note that this user
# does not require any special privileges.
# You can double-check this by clicking "Properties" of your user in
# ADSI Edit and examining the "Path" value, such as:
# LDAP://domaincontroller1.example.com/CN=user,CN=Users,DC=example,DC=com
# which would be $user="cn=user,cn=Users,dc=example,dc=com"
# Note: You can also use the UPN login: "user\@example.com"
$user="cn=user,cn=Users,dc=example,dc=com";
$passwd="password";
 
# Connecting to Active Directory domain controllers
$noldapserver=0;
$ldap = Net::LDAP->new($dc1) or
   $noldapserver=1;
if ($noldapserver == 1)  {
   $ldap = Net::LDAP->new($dc2) or
      die "Error connecting to specified domain controllers $@ \n";
}
 
$mesg = $ldap->bind ( dn => $user,
                      password =>$passwd);
if ( $mesg->code()) {
    die ("error:", $mesg->error_text((),"\n"));
}
 
# How many LDAP query results to grab for each paged round
# Set to under 1000 for Active Directory
$page = Net::LDAP::Control::Paged->new( size => 990 );
 
@args = ( base     => $hqbase,
# Play around with this to grab objects such as Contacts, Public Folders, etc.
# A minimal filter for just users with email would be:
# filter => "(&(sAMAccountName=*)(mail=*))"
         filter => "(& (mailnickname=*) (| (&(objectCategory=person)
                    (objectClass=user)(!(homeMDB=*))(!(msExchHomeServerName=*)))
                    (&(objectCategory=person)(objectClass=user)(|(homeMDB=*)
                    (msExchHomeServerName=*)))(&(objectCategory=person)(objectClass=contact))
                    (objectCategory=group)(objectCategory=publicFolder) ))",
          control  => [ $page ],
          attrs  => "proxyAddresses",
);
 
my $cookie;
while(1) {
  # Perform search
  my $mesg = $ldap->search( @args );
 
# Filtering results for proxyAddresses attributes  
  foreach my $entry ( $mesg->entries ) {
    my $name = $entry->get_value( "cn" );
    # LDAP Attributes are multi-valued, so we have to print each one.
    foreach my $mail ( $entry->get_value( "proxyAddresses" ) ) {
     # Test if the Line starts with one of the following lines:
     # proxyAddresses: [smtp|SMTP]:
     # and also discard this starting string, so that $mail is only the
     # address without any other characters...
     if ( $mail =~ s/^smtp://igs ) {
       print VALID lc($mail)." OK\n"; 
     }
    }
  }
 
  # Only continue on LDAP_SUCCESS
  $mesg->code and last;
 
  # Get cookie from paged control
  my($resp)  = $mesg->control( LDAP_CONTROL_PAGED ) or last;
  $cookie    = $resp->cookie or last;
 
  # Set cookie in paged control
  $page->cookie($cookie);
}
 
if ($cookie) {
  # We had an abnormal exit, so let the server know we do not want any more
  $page->cookie($cookie);
  $page->size(0);
  $ldap->search( @args );
  # Also would be a good idea to die unhappily and inform OP at this point
     die("LDAP query unsuccessful");
}
 
$ldap->unbind;
 
# Add additional restrictions, users, etc. to the output file below.
#print VALID "user\@domain1.com OK\n";
#print VALID "user\@domain2.com 550 User unknown.\n";
#print VALID "domain3.com 550 User does not exist.\n";
 
close VALID;

Re: Скрипт для Postfix и Exchenge

Добавлено: 2013-12-05 21:48:50
Mvairs
Забыл добавить это с боевого сервера

pkg_info | grep perl

Код: Выделить всё

amavisd-new-2.6.4_7,1 Performance-enhanced daemonized version of amavis-perl
p5-DBI-1.613        The perl5 Database Interface.  Required for DBD::* modules
p5-Error-0.17016    Perl module to provide Error/exception support for perl: Er
p5-GD-2.45          A perl5 interface to Gd Graphics Library version2
p5-GD-Graph-1.44.01_4 Graph plotting module for perl5
p5-MIME-Tools-5.428,2 A set of perl5 modules for MIME
p5-Net-SNMP-5.2.0   A perl module for SNMP... Net::SNMP
p5-Scalar-List-Utils-1.23,1 Perl subroutines that would be nice to have in the perl cor
p5-Storable-2.21    Persistency for perl data structures
p5-Test-Harness-3.22 Run perl standard test scripts with statistics
p5-Test-Simple-0.70 Basic utilities for writing tests in perl
p5-Time-HiRes-1.9721,1 A perl5 module implementing High resolution time, sleep, an
p5-perl-ldap-0.40   A Client interface to LDAP (includes Net::LDAP)
perl-5.10.1_2       Practical Extraction and Report Language

Re: Скрипт для Postfix и Exchenge

Добавлено: 2013-12-09 9:13:44
Mvairs
Вот что говорит truss на этот скрипт =\\\

Код: Выделить всё

mmap(0x0,32768,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34366132224 (0x800619000)
issetugid(0x800818f80,0x7fffffffefd2,0x40,0x0,0xffff800800819fae,0x0) = 0 (0x0)
lstat("/etc",{ mode=drwxr-xr-x ,inode=963072,size=2048,blksize=32768 }) = 0 (0x0)
lstat("/etc/libmap.conf",0x7fffffffc5e0)	 ERR#2 'No such file or directory'
access("/usr/local/lib/perl5/5.14/mach/CORE/libperl.so",0) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/mach/CORE/libperl.so",O_RDONLY,040315300) = 3 (0x3)
fstat(3,{ mode=-r-xr-xr-x ,inode=2011037,size=1553351,blksize=32768 }) = 0 (0x0)
mmap(0x0,4096,PROT_READ,MAP_PRIVATE|0x40000,3,0x0) = 34366164992 (0x800621000)
mmap(0x0,3547136,PROT_NONE,MAP_PRIVATE|MAP_ANON|MAP_NOCORE,-1,0x0) = 34368233472 (0x80081a000)
mmap(0x80081a000,1409024,PROT_READ|PROT_EXEC,MAP_PRIVATE|MAP_FIXED|MAP_NOCORE|0x40000,3,0x0) = 34368233472 (0x80081a000)
mmap(0x800b72000,36864,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|0x40000,3,0x158000) = 34371739648 (0x800b72000)
mmap(0x800b7b000,4096,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|MAP_ANON,-1,0x0) = 34371776512 (0x800b7b000)
munmap(0x800621000,4096)			 = 0 (0x0)
close(3)					 = 0 (0x0)
access("/usr/local/lib/perl5/5.14/mach/CORE/libm.so.5",0) ERR#2 'No such file or directory'
open("/var/run/ld-elf.so.hints",O_RDONLY,040315300) = 3 (0x3)
read(3,"Ehnt\^A\0\0\0\M^@\0\0\0-\0\0\0\0"...,128) = 128 (0x80)
lseek(3,0x80,SEEK_SET)				 = 128 (0x80)
read(3,"/lib:/usr/lib:/usr/lib/compat:/u"...,45) = 45 (0x2d)
close(3)					 = 0 (0x0)
access("/lib/libm.so.5",0)			 = 0 (0x0)
open("/lib/libm.so.5",O_RDONLY,040315300)	 = 3 (0x3)
fstat(3,{ mode=-r--r--r-- ,inode=1043333,size=158888,blksize=32768 }) = 0 (0x0)
mmap(0x0,4096,PROT_READ,MAP_PRIVATE|0x40000,3,0x0) = 34366164992 (0x800621000)
mmap(0x0,2232320,PROT_NONE,MAP_PRIVATE|MAP_ANON|MAP_NOCORE,-1,0x0) = 34371780608 (0x800b7c000)
mmap(0x800b7c000,131072,PROT_READ|PROT_EXEC,MAP_PRIVATE|MAP_FIXED|MAP_NOCORE|0x40000,3,0x0) = 34371780608 (0x800b7c000)
mmap(0x800d9c000,4096,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|0x40000,3,0x20000) = 34374008832 (0x800d9c000)
munmap(0x800621000,4096)			 = 0 (0x0)
close(3)					 = 0 (0x0)
access("/usr/local/lib/perl5/5.14/mach/CORE/libcrypt.so.5",0) ERR#2 'No such file or directory'
access("/lib/libcrypt.so.5",0)			 = 0 (0x0)
open("/lib/libcrypt.so.5",O_RDONLY,040315300)	 = 3 (0x3)
fstat(3,{ mode=-r--r--r-- ,inode=1043331,size=58552,blksize=32768 }) = 0 (0x0)
mmap(0x0,4096,PROT_READ,MAP_PRIVATE|0x40000,3,0x0) = 34366164992 (0x800621000)
mmap(0x0,2224128,PROT_NONE,MAP_PRIVATE|MAP_ANON|MAP_NOCORE,-1,0x0) = 34374012928 (0x800d9d000)
mmap(0x800d9d000,53248,PROT_READ|PROT_EXEC,MAP_PRIVATE|MAP_FIXED|MAP_NOCORE|0x40000,3,0x0) = 34374012928 (0x800d9d000)
mmap(0x800faa000,4096,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|0x40000,3,0xd000) = 34376163328 (0x800faa000)
mmap(0x800fab000,69632,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|MAP_ANON,-1,0x0) = 34376167424 (0x800fab000)
munmap(0x800621000,4096)			 = 0 (0x0)
close(3)					 = 0 (0x0)
access("/usr/local/lib/perl5/5.14/mach/CORE/libutil.so.9",0) ERR#2 'No such file or directory'
access("/lib/libutil.so.9",0)			 = 0 (0x0)
open("/lib/libutil.so.9",O_RDONLY,040315300)	 = 3 (0x3)
fstat(3,{ mode=-r--r--r-- ,inode=1043338,size=74176,blksize=32768 }) = 0 (0x0)
mmap(0x0,4096,PROT_READ,MAP_PRIVATE|0x40000,3,0x0) = 34366164992 (0x800621000)
mmap(0x0,2174976,PROT_NONE,MAP_PRIVATE|MAP_ANON|MAP_NOCORE,-1,0x0) = 34376237056 (0x800fbc000)
mmap(0x800fbc000,65536,PROT_READ|PROT_EXEC,MAP_PRIVATE|MAP_FIXED|MAP_NOCORE|0x40000,3,0x0) = 34376237056 (0x800fbc000)
mmap(0x8011cc000,4096,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|0x40000,3,0x10000) = 34378399744 (0x8011cc000)
mmap(0x8011cd000,8192,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|MAP_ANON,-1,0x0) = 34378403840 (0x8011cd000)
munmap(0x800621000,4096)			 = 0 (0x0)
close(3)					 = 0 (0x0)
access("/usr/local/lib/perl5/5.14/mach/CORE/libthr.so.3",0) ERR#2 'No such file or directory'
access("/lib/libthr.so.3",0)			 = 0 (0x0)
open("/lib/libthr.so.3",O_RDONLY,040315300)	 = 3 (0x3)
fstat(3,{ mode=-r--r--r-- ,inode=1043359,size=101048,blksize=32768 }) = 0 (0x0)
mmap(0x0,4096,PROT_READ,MAP_PRIVATE|0x40000,3,0x0) = 34366164992 (0x800621000)
mmap(0x0,2236416,PROT_NONE,MAP_PRIVATE|MAP_ANON|MAP_NOCORE,-1,0x0) = 34378412032 (0x8011cf000)
mmap(0x8011cf000,94208,PROT_READ|PROT_EXEC,MAP_PRIVATE|MAP_FIXED|MAP_NOCORE|0x40000,3,0x0) = 34378412032 (0x8011cf000)
mmap(0x8013e5000,8192,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|0x40000,3,0x16000) = 34380599296 (0x8013e5000)
mmap(0x8013e7000,40960,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|MAP_ANON,-1,0x0) = 34380607488 (0x8013e7000)
munmap(0x800621000,4096)			 = 0 (0x0)
close(3)					 = 0 (0x0)
access("/usr/local/lib/perl5/5.14/mach/CORE/libc.so.7",0) ERR#2 'No such file or directory'
access("/lib/libc.so.7",0)			 = 0 (0x0)
open("/lib/libc.so.7",O_RDONLY,040315300)	 = 3 (0x3)
fstat(3,{ mode=-r--r--r-- ,inode=1043330,size=1369520,blksize=32768 }) = 0 (0x0)
mmap(0x0,4096,PROT_READ,MAP_PRIVATE|0x40000,3,0x0) = 34366164992 (0x800621000)
mmap(0x0,3485696,PROT_NONE,MAP_PRIVATE|MAP_ANON|MAP_NOCORE,-1,0x0) = 34380648448 (0x8013f1000)
mmap(0x8013f1000,1236992,PROT_READ|PROT_EXEC,MAP_PRIVATE|MAP_FIXED|MAP_NOCORE|0x40000,3,0x0) = 34380648448 (0x8013f1000)
mmap(0x80171e000,45056,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|0x40000,3,0x12d000) = 34383978496 (0x80171e000)
mmap(0x801729000,110592,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|MAP_ANON,-1,0x0) = 34384023552 (0x801729000)
munmap(0x800621000,4096)			 = 0 (0x0)
close(3)					 = 0 (0x0)
mmap(0x0,69632,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34366164992 (0x800621000)
munmap(0x80062d000,20480)			 = 0 (0x0)
mmap(0x0,102400,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34366214144 (0x80062d000)
sysarch(0x81,0x7fffffffd350,0x80061e348,0x0,0xfffffffffeefd770,0x8080808080808080) = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
getpid()					 = 5878 (0x16f6)
__sysctl(0x7fffffffd2b0,0x2,0x8013f0f80,0x7fffffffd2b8,0x0,0x0) = 0 (0x0)
__sysctl(0x7fffffffd1e0,0x2,0x7fffffffd210,0x7fffffffd278,0x8011e2a30,0xd) = 0 (0x0)
__sysctl(0x7fffffffd210,0x3,0x8013efe68,0x7fffffffd2b8,0x0,0x0) = 0 (0x0)
readlink("/etc/malloc.conf",0x7fffffffcdb0,1024) ERR#2 'No such file or directory'
issetugid(0x8014f8659,0x7fffffffcdb0,0xffffffffffffffff,0x0,0x2,0x0) = 0 (0x0)
break(0x800000)					 = 0 (0x0)
mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34384134144 (0x801744000)
mmap(0x801b44000,770048,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34388328448 (0x801b44000)
munmap(0x801744000,770048)			 = 0 (0x0)
thr_self(0x801807400,0x1,0x0,0x0,0x40,0x7fffffffc8e0) = 0 (0x0)
mmap(0x7fffffbfe000,4096,PROT_NONE,MAP_ANON,-1,0x0) = 140737484152832 (0x7fffffbfe000)
rtprio_thread(0x0,0x18705,0x7fffffffd280,0x1000,0xffffffff,0x0) = 0 (0x0)
sysarch(0x81,0x7fffffffd2a0,0x8013efa40,0x8013efde0,0xffffffff,0x0) = 0 (0x0)
sigaction(32,{ 0x8011dc0b0 SA_SIGINFO ss_t },0x0) = 0 (0x0)
sigprocmask(SIG_UNBLOCK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
getuid()					 = 0 (0x0)
geteuid()					 = 0 (0x0)
getgid()					 = 0 (0x0)
getegid()					 = 0 (0x0)
__sysctl(0x7fffffffdae0,0x2,0x7fffffffdafc,0x7fffffffdaf0,0x0,0x0) = 0 (0x0)
open("/dev/urandom",O_RDONLY,00)		 = 3 (0x3)
read(3,"oQ\M-E\M^F",4)				 = 4 (0x4)
close(3)					 = 0 (0x0)
clock_gettime(13,{1386567704.000000000 })	 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/5.14.4/amd64-freebsd",0x7fffffffd8f0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/5.14.4",0x7fffffffd8f0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/amd64-freebsd",0x7fffffffd8f0) ERR#2 'No such file or directory'
ioctl(0,TIOCGETA,0xffffd740)			 = 0 (0x0)
lseek(0,0x0,SEEK_CUR)				 = 109524 (0x1abd4)
ioctl(1,TIOCGETA,0xffffd740)			 = 0 (0x0)
lseek(1,0x0,SEEK_CUR)				 = 109524 (0x1abd4)
ioctl(2,TIOCGETA,0xffffd750)			 = 0 (0x0)
lseek(2,0x0,SEEK_CUR)				 = 109524 (0x1abd4)
open("/usr/bin/getadsmtp.pl",O_RDONLY,00)	 = 3 (0x3)
ioctl(3,TIOCGETA,0xffffd820)			 ERR#25 'Inappropriate ioctl for device'
lseek(3,0x0,SEEK_CUR)				 = 0 (0x0)
fcntl(3,F_SETFD,FD_CLOEXEC)			 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGCHLD,0x0,{ SIG_DFL 0x0 ss_t })	 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
getpid()					 = 5878 (0x16f6)
read(3,"#!/usr/bin/perl -T -w\n\n# Versi"...,8192) = 5348 (0x14e4)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP.pmc",0x7fffffffd490) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP.pm",0x7fffffffd400) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP.pmc",0x7fffffffd490) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP.pm",0x7fffffffd400) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP.pmc",0x7fffffffd490) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP.pm",{ mode=-r--r--r-- ,inode=1928528,size=28079,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP.pm",O_RDONLY,00) = 4 (0x4)
ioctl(4,TIOCGETA,0xffffd240)			 ERR#25 'Inappropriate ioctl for device'
lseek(4,0x0,SEEK_CUR)				 = 0 (0x0)
read(4,"# Copyright (c) 1997-2004 Graham"...,8192) = 8192 (0x2000)
stat("/usr/local/lib/perl5/5.14/BSDPAN/strict.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/strict.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/strict.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/strict.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/strict.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/strict.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/strict.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/strict.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/strict.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/strict.pm",{ mode=-r--r--r-- ,inode=1471524,size=3716,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/strict.pm",O_RDONLY,00) = 5 (0x5)
ioctl(5,TIOCGETA,0xffffcd20)			 ERR#25 'Inappropriate ioctl for device'
lseek(5,0x0,SEEK_CUR)				 = 0 (0x0)
read(5,"package strict;\n\n$strict::VERS"...,8192) = 3716 (0xe84)
lseek(5,0x36e,SEEK_SET)				 = 878 (0x36e)
lseek(5,0x0,SEEK_CUR)				 = 878 (0x36e)
close(5)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Socket.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Socket.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Socket.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Socket.pm",{ mode=-r--r--r-- ,inode=1470783,size=36326,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/mach/Socket.pm",O_RDONLY,00) = 5 (0x5)
ioctl(5,TIOCGETA,0xffffcd20)			 ERR#25 'Inappropriate ioctl for device'
lseek(5,0x0,SEEK_CUR)				 = 0 (0x0)
read(5,"package Socket;\n\nuse strict;\n"...,8192) = 8192 (0x2000)
read(5,"r_in6().\n\nProvided largely for"...,8192) = 8192 (0x2000)
read(5,"ants are recognised as $flags. O"...,8192) = 8192 (0x2000)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Carp.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Carp.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Carp.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Carp.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Carp.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Carp.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Carp.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Carp.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/Carp.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/Carp.pm",{ mode=-r--r--r-- ,inode=1471563,size=17564,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/Carp.pm",O_RDONLY,00) = 6 (0x6)
ioctl(6,TIOCGETA,0xffffc800)			 ERR#25 'Inappropriate ioctl for device'
lseek(6,0x0,SEEK_CUR)				 = 0 (0x0)
read(6,"package Carp;\n\nuse strict;\nus"...,8192) = 8192 (0x2000)
stat("/usr/local/lib/perl5/5.14/BSDPAN/warnings.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/warnings.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/warnings.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/warnings.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/warnings.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/warnings.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/warnings.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/warnings.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/warnings.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/warnings.pm",{ mode=-r--r--r-- ,inode=1471551,size=18672,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/warnings.pm",O_RDONLY,00) = 7 (0x7)
ioctl(7,TIOCGETA,0xffffc2e0)			 ERR#25 'Inappropriate ioctl for device'
lseek(7,0x0,SEEK_CUR)				 = 0 (0x0)
read(7,"# -*- buffer-read-only: t -*-\n#"...,8192) = 8192 (0x2000)
read(7,"0\\x00\\x00\\x00\\x00\\x00", # ["...,8192) = 8192 (0x2000)
read(7,"$offset;\n    }\n    else {\n   "...,8192) = 2288 (0x8f0)
read(7,0x8018af000,8192)			 = 0 (0x0)
close(7)					 = 0 (0x0)
read(6,"ler = $cgc ? $cgc->($i) : caller"...,8192) = 8192 (0x2000)
lseek(6,0x27b2,SEEK_SET)			 = 10162 (0x27b2)
lseek(6,0x0,SEEK_CUR)				 = 10162 (0x27b2)
close(6)					 = 0 (0x0)
madvise(0x8019ee000,0x3000,0x5,0x1ed,0x0,0x1)	 = 0 (0x0)
madvise(0x801991000,0x3000,0x5,0x190,0x0,0x1)	 = 0 (0x0)
madvise(0x801938000,0x5000,0x5,0x137,0x0,0x1)	 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Exporter.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Exporter.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Exporter.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Exporter.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Exporter.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Exporter.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Exporter.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Exporter.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/Exporter.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/Exporter.pm",{ mode=-r--r--r-- ,inode=1471561,size=18686,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/Exporter.pm",O_RDONLY,00) = 6 (0x6)
ioctl(6,TIOCGETA,0xffffc800)			 ERR#25 'Inappropriate ioctl for device'
lseek(6,0x0,SEEK_CUR)				 = 0 (0x0)
read(6,"package Exporter;\n\nrequire 5.0"...,8192) = 8192 (0x2000)
lseek(6,0x94d,SEEK_SET)				 = 2381 (0x94d)
lseek(6,0x0,SEEK_CUR)				 = 2381 (0x94d)
close(6)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/warnings/register.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/warnings/register.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/warnings/register.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/warnings/register.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/warnings/register.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/warnings/register.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/warnings/register.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/warnings/register.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/warnings/register.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/warnings/register.pm",{ mode=-r--r--r-- ,inode=1551906,size=772,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/warnings/register.pm",O_RDONLY,00) = 6 (0x6)
ioctl(6,TIOCGETA,0xffffc800)			 ERR#25 'Inappropriate ioctl for device'
lseek(6,0x0,SEEK_CUR)				 = 0 (0x0)
read(6,"package warnings::register;\n\no"...,8192) = 772 (0x304)
read(6,0x8018ad000,8192)			 = 0 (0x0)
close(6)					 = 0 (0x0)
read(5,"IP_RECVOPTS IP_RECVRETOPTS\n\tIP"...,8192) = 8192 (0x2000)
madvise(0x801a01000,0x1000,0x5,0x200,0x7fffffffbe90,0x7fffffffbe90) = 0 (0x0)
madvise(0x8019f8000,0x1000,0x5,0x1f7,0x7fffffffbe90,0x7fffffffbe90) = 0 (0x0)
madvise(0x8019f2000,0x1000,0x5,0x1f1,0x7fffffffbe90,0x7fffffffbe90) = 0 (0x0)
madvise(0x80198f000,0x5000,0x5,0x18e,0x7fffffffbe90,0x7fffffffbe90) = 0 (0x0)
madvise(0x801938000,0x2000,0x5,0x137,0x7fffffffbe90,0x7fffffffbe90) = 0 (0x0)
read(5,"or return fake_makeerr( EAI_NONA"...,8192) = 3558 (0xde6)
read(5,0x8018ab000,8192)			 = 0 (0x0)
close(5)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/XSLoader.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/XSLoader.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/XSLoader.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/XSLoader.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/XSLoader.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/XSLoader.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/XSLoader.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/XSLoader.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/XSLoader.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/XSLoader.pm",{ mode=-r--r--r-- ,inode=1471607,size=10205,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/XSLoader.pm",O_RDONLY,00) = 5 (0x5)
ioctl(5,TIOCGETA,0xffffcd20)			 ERR#25 'Inappropriate ioctl for device'
lseek(5,0x0,SEEK_CUR)				 = 0 (0x0)
read(5,"# Generated from XSLoader.pm.PL "...,8192) = 8192 (0x2000)
lseek(5,0xbaf,SEEK_SET)				 = 2991 (0xbaf)
lseek(5,0x0,SEEK_CUR)				 = 2991 (0xbaf)
close(5)					 = 0 (0x0)
stat("/usr/local/lib/perl5/site_perl/5.14/mach/auto/Socket/Socket.bs",{ mode=-r--r--r-- ,inode=1927263,size=0,blksize=32768 }) = 0 (0x0)
stat("/usr/local/lib/perl5/site_perl/5.14/mach/auto/Socket/Socket.so",{ mode=-r-xr-xr-x ,inode=1927264,size=46323,blksize=32768 }) = 0 (0x0)
stat("/usr/local/lib/perl5/site_perl/5.14/mach/auto/Socket/Socket.bs",{ mode=-r--r--r-- ,inode=1927263,size=0,blksize=32768 }) = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/mach/auto/Socket/Socket.so",O_RDONLY,077) = 5 (0x5)
fstat(5,{ mode=-r-xr-xr-x ,inode=1927264,size=46323,blksize=32768 }) = 0 (0x0)
mmap(0x0,4096,PROT_READ,MAP_PRIVATE|0x40000,5,0x0) = 34366316544 (0x800646000)
mmap(0x0,2138112,PROT_NONE,MAP_PRIVATE|MAP_ANON|MAP_NOCORE,-1,0x0) = 34389098496 (0x801c00000)
mmap(0x801c00000,32768,PROT_READ|PROT_EXEC,MAP_PRIVATE|MAP_FIXED|MAP_NOCORE|0x40000,5,0x0) = 34389098496 (0x801c00000)
mmap(0x801e08000,8192,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|0x40000,5,0x8000) = 34391228416 (0x801e08000)
munmap(0x800646000,4096)			 = 0 (0x0)
close(5)					 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/IO/Socket.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/IO/Socket.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/IO/Socket.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/IO/Socket.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/IO/Socket.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/IO/Socket.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/IO/Socket.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/IO/Socket.pm",{ mode=-r--r--r-- ,inode=1712613,size=13834,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/mach/IO/Socket.pm",O_RDONLY,00) = 5 (0x5)
ioctl(5,TIOCGETA,0xffffcd20)			 ERR#25 'Inappropriate ioctl for device'
lseek(5,0x0,SEEK_CUR)				 = 0 (0x0)
read(5,"# IO::Socket.pm\n#\n# Copyright "...,8192) = 8192 (0x2000)
stat("/usr/local/lib/perl5/5.14/BSDPAN/IO/Handle.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/IO/Handle.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/IO/Handle.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/IO/Handle.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/IO/Handle.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/IO/Handle.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/IO/Handle.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/IO/Handle.pm",{ mode=-r--r--r-- ,inode=1712616,size=16811,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/mach/IO/Handle.pm",O_RDONLY,00) = 6 (0x6)
ioctl(6,TIOCGETA,0xffffc800)			 ERR#25 'Inappropriate ioctl for device'
lseek(6,0x0,SEEK_CUR)				 = 0 (0x0)
read(6,"package IO::Handle;\n\n=head1 NA"...,8192) = 8192 (0x2000)
read(6,"ariables with its own name separ"...,8192) = 8192 (0x2000)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Symbol.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Symbol.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Symbol.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Symbol.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Symbol.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Symbol.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Symbol.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Symbol.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/Symbol.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/Symbol.pm",{ mode=-r--r--r-- ,inode=1471568,size=4794,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/Symbol.pm",O_RDONLY,00) = 7 (0x7)
ioctl(7,TIOCGETA,0xffffc2e0)			 ERR#25 'Inappropriate ioctl for device'
lseek(7,0x0,SEEK_CUR)				 = 0 (0x0)
read(7,"package Symbol;\n\n=head1 NAME\n"...,8192) = 4794 (0x12ba)
read(7,0x8018b3000,8192)			 = 0 (0x0)
close(7)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/SelectSaver.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/SelectSaver.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/SelectSaver.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/SelectSaver.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/SelectSaver.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/SelectSaver.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/SelectSaver.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/SelectSaver.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/SelectSaver.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/SelectSaver.pm",{ mode=-r--r--r-- ,inode=1471578,size=1076,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/SelectSaver.pm",O_RDONLY,00) = 7 (0x7)
ioctl(7,TIOCGETA,0xffffc2e0)			 ERR#25 'Inappropriate ioctl for device'
lseek(7,0x0,SEEK_CUR)				 = 0 (0x0)
read(7,"package SelectSaver;\n\nour $VER"...,8192) = 1076 (0x434)
read(7,0x8018b3000,8192)			 = 0 (0x0)
close(7)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/IO.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/IO.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/IO.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/IO.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/IO.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/IO.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/IO.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/IO.pm",{ mode=-r--r--r-- ,inode=1471628,size=1404,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/mach/IO.pm",O_RDONLY,00) = 7 (0x7)
ioctl(7,TIOCGETA,0xffffc2e0)			 ERR#25 'Inappropriate ioctl for device'
lseek(7,0x0,SEEK_CUR)				 = 0 (0x0)
read(7,"#\n\npackage IO;\n\nuse XSLoader"...,8192) = 1404 (0x57c)
lseek(7,0x19f,SEEK_SET)				 = 415 (0x19f)
lseek(7,0x0,SEEK_CUR)				 = 415 (0x19f)
close(7)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/mach/auto/IO/IO.bs",0x800b7b820) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/auto/IO/IO.so",{ mode=-r-xr-xr-x ,inode=1870592,size=20874,blksize=32768 }) = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/mach/auto/IO/IO.bs",0x800b7b820) ERR#2 'No such file or directory'
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/mach/auto/IO/IO.so",O_RDONLY,055) = 7 (0x7)
fstat(7,{ mode=-r-xr-xr-x ,inode=1870592,size=20874,blksize=32768 }) = 0 (0x0)
mmap(0x0,4096,PROT_READ,MAP_PRIVATE|0x40000,7,0x0) = 34366316544 (0x800646000)
mmap(0x0,2113536,PROT_NONE,MAP_PRIVATE|MAP_ANON|MAP_NOCORE,-1,0x0) = 34391236608 (0x801e0a000)
mmap(0x801e0a000,16384,PROT_READ|PROT_EXEC,MAP_PRIVATE|MAP_FIXED|MAP_NOCORE|0x40000,7,0x0) = 34391236608 (0x801e0a000)
mmap(0x80200d000,4096,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|0x40000,7,0x3000) = 34393346048 (0x80200d000)
munmap(0x800646000,4096)			 = 0 (0x0)
close(7)					 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
read(6,"ed(&CONSTANT_NAME)\n\nsub consta"...,8192) = 427 (0x1ab)
read(6,0x8018af000,8192)			 = 0 (0x0)
close(6)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Errno.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Errno.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Errno.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Errno.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Errno.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Errno.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Errno.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Errno.pm",{ mode=-r--r--r-- ,inode=1471599,size=5840,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/mach/Errno.pm",O_RDONLY,00) = 6 (0x6)
ioctl(6,TIOCGETA,0xffffc800)			 ERR#25 'Inappropriate ioctl for device'
lseek(6,0x0,SEEK_CUR)				 = 0 (0x0)
read(6,"# -*- buffer-read-only: t -*-\n#"...,8192) = 5840 (0x16d0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Config.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Config.pm",{ mode=-r--r--r-- ,inode=1792877,size=1647,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/BSDPAN/Config.pm",O_RDONLY,00) = 7 (0x7)
ioctl(7,TIOCGETA,0xffffc2e0)			 ERR#25 'Inappropriate ioctl for device'
lseek(7,0x0,SEEK_CUR)				 = 0 (0x0)
read(7,"# ------------------------------"...,8192) = 1647 (0x66f)
stat("/usr/local/lib/perl5/5.14/BSDPAN/BSDPAN.pmc",0x7fffffffc010) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/BSDPAN.pm",{ mode=-r--r--r-- ,inode=1792874,size=2529,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/BSDPAN/BSDPAN.pm",O_RDONLY,00) = 8 (0x8)
ioctl(8,TIOCGETA,0xffffbdc0)			 ERR#25 'Inappropriate ioctl for device'
lseek(8,0x0,SEEK_CUR)				 = 0 (0x0)
read(8,"# ------------------------------"...,8192) = 2529 (0x9e1)
lseek(8,0x624,SEEK_SET)				 = 1572 (0x624)
lseek(8,0x0,SEEK_CUR)				 = 1572 (0x624)
close(8)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/BSDPAN/Override.pmc",0x7fffffffc010) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/BSDPAN/Override.pm",{ mode=-r--r--r-- ,inode=1792876,size=3864,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/BSDPAN/BSDPAN/Override.pm",O_RDONLY,00) = 8 (0x8)
ioctl(8,TIOCGETA,0xffffbdc0)			 ERR#25 'Inappropriate ioctl for device'
lseek(8,0x0,SEEK_CUR)				 = 0 (0x0)
read(8,"# ------------------------------"...,8192) = 3864 (0xf18)
lseek(8,0xd12,SEEK_SET)				 = 3346 (0xd12)
lseek(8,0x0,SEEK_CUR)				 = 3346 (0xd12)
close(8)					 = 0 (0x0)
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Config.pmc",0x7fffffffc010) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Config.pm",0x7fffffffbf80) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Config.pmc",0x7fffffffc010) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Config.pm",0x7fffffffbf80) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Config.pmc",0x7fffffffc010) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Config.pm",{ mode=-r--r--r-- ,inode=1471589,size=3114,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/mach/Config.pm",O_RDONLY,00) = 8 (0x8)
ioctl(8,TIOCGETA,0xffffbdc0)			 ERR#25 'Inappropriate ioctl for device'
lseek(8,0x0,SEEK_CUR)				 = 0 (0x0)
read(8,"# This file was created by confi"...,8192) = 3114 (0xc2a)
stat("/usr/local/lib/perl5/site_perl/5.14/mach/vars.pmc",0x7fffffffbaf0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/vars.pm",0x7fffffffba60) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/vars.pmc",0x7fffffffbaf0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/vars.pm",0x7fffffffba60) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/vars.pmc",0x7fffffffbaf0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/vars.pm",0x7fffffffba60) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/vars.pmc",0x7fffffffbaf0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/vars.pm",{ mode=-r--r--r-- ,inode=1471514,size=2358,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/vars.pm",O_RDONLY,00) = 9 (0x9)
ioctl(9,TIOCGETA,0xffffb8a0)			 ERR#25 'Inappropriate ioctl for device'
lseek(9,0x0,SEEK_CUR)				 = 0 (0x0)
read(9,"package vars;\n\nuse 5.006;\n\no"...,8192) = 2358 (0x936)
lseek(9,0x47c,SEEK_SET)				 = 1148 (0x47c)
lseek(9,0x0,SEEK_CUR)				 = 1148 (0x47c)
close(9)					 = 0 (0x0)
read(8,0x8018b5000,8192)			 = 0 (0x0)
close(8)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Exporter/Heavy.pmc",0x7fffffffc010) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Exporter/Heavy.pm",0x7fffffffbf80) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Exporter/Heavy.pmc",0x7fffffffc010) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Exporter/Heavy.pm",0x7fffffffbf80) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Exporter/Heavy.pmc",0x7fffffffc010) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Exporter/Heavy.pm",0x7fffffffbf80) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Exporter/Heavy.pmc",0x7fffffffc010) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Exporter/Heavy.pm",0x7fffffffbf80) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/Exporter/Heavy.pmc",0x7fffffffc010) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/Exporter/Heavy.pm",{ mode=-r--r--r-- ,inode=1471721,size=6378,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/Exporter/Heavy.pm",O_RDONLY,00) = 8 (0x8)
ioctl(8,TIOCGETA,0xffffbdc0)			 ERR#25 'Inappropriate ioctl for device'
lseek(8,0x0,SEEK_CUR)				 = 0 (0x0)
read(8,"package Exporter::Heavy;\n\nuse "...,8192) = 6378 (0x18ea)
read(8,0x8018b1000,8192)			 = 0 (0x0)
close(8)					 = 0 (0x0)
read(7,0x8018b3000,8192)			 = 0 (0x0)
close(7)					 = 0 (0x0)
lseek(6,0x117b,SEEK_SET)			 = 4475 (0x117b)
lseek(6,0x0,SEEK_CUR)				 = 4475 (0x117b)
close(6)					 = 0 (0x0)
read(5,"shift;\n    ${*$sock}{'io_socket"...,8192) = 5642 (0x160a)
lseek(5,0x20af,SEEK_SET)			 = 8367 (0x20af)
lseek(5,0x0,SEEK_CUR)				 = 8367 (0x20af)
close(5)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/IO/Socket/INET.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/IO/Socket/INET.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/IO/Socket/INET.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/IO/Socket/INET.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/IO/Socket/INET.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/IO/Socket/INET.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/IO/Socket/INET.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/IO/Socket/INET.pm",{ mode=-r--r--r-- ,inode=1792867,size=12342,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/mach/IO/Socket/INET.pm",O_RDONLY,00) = 5 (0x5)
ioctl(5,TIOCGETA,0xffffcd20)			 ERR#25 'Inappropriate ioctl for device'
lseek(5,0x0,SEEK_CUR)				 = 0 (0x0)
read(5,"# IO::Socket::INET.pm\n#\n# Copy"...,8192) = 8192 (0x2000)
lseek(5,0x1d20,SEEK_SET)			 = 7456 (0x1d20)
lseek(5,0x0,SEEK_CUR)				 = 7456 (0x1d20)
close(5)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/IO/Socket/UNIX.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/IO/Socket/UNIX.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/IO/Socket/UNIX.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/IO/Socket/UNIX.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/IO/Socket/UNIX.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/IO/Socket/UNIX.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/IO/Socket/UNIX.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/IO/Socket/UNIX.pm",{ mode=-r--r--r-- ,inode=1792868,size=3111,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/mach/IO/Socket/UNIX.pm",O_RDONLY,00) = 5 (0x5)
ioctl(5,TIOCGETA,0xffffcd20)			 ERR#25 'Inappropriate ioctl for device'
lseek(5,0x0,SEEK_CUR)				 = 0 (0x0)
read(5,"# IO::Socket::UNIX.pm\n#\n# Copy"...,8192) = 3111 (0xc27)
lseek(5,0x55e,SEEK_SET)				 = 1374 (0x55e)
lseek(5,0x0,SEEK_CUR)				 = 1374 (0x55e)
close(5)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/IO/Select.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/IO/Select.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/IO/Select.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/IO/Select.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/IO/Select.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/IO/Select.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/IO/Select.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/IO/Select.pm",{ mode=-r--r--r-- ,inode=1712612,size=8253,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/mach/IO/Select.pm",O_RDONLY,00) = 5 (0x5)
ioctl(5,TIOCGETA,0xffffcd20)			 ERR#25 'Inappropriate ioctl for device'
lseek(5,0x0,SEEK_CUR)				 = 0 (0x0)
read(5,"# IO::Select.pm\n#\n# Copyright "...,8192) = 8192 (0x2000)
lseek(5,0x10a3,SEEK_SET)			 = 4259 (0x10a3)
lseek(5,0x0,SEEK_CUR)				 = 4259 (0x10a3)
close(5)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Tie/Hash.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Tie/Hash.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Tie/Hash.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Tie/Hash.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Tie/Hash.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Tie/Hash.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Tie/Hash.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Tie/Hash.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/Tie/Hash.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/Tie/Hash.pm",{ mode=-r--r--r-- ,inode=1471728,size=7626,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/Tie/Hash.pm",O_RDONLY,00) = 5 (0x5)
ioctl(5,TIOCGETA,0xffffcd20)			 ERR#25 'Inappropriate ioctl for device'
lseek(5,0x0,SEEK_CUR)				 = 0 (0x0)
read(5,"package Tie::Hash;\n\nour $VERSI"...,8192) = 7626 (0x1dca)
read(5,0x8018ab000,8192)			 = 0 (0x0)
close(5)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Convert/ASN1.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Convert/ASN1.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Convert/ASN1.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Convert/ASN1.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Convert/ASN1.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Convert/ASN1.pm",{ mode=-r--r--r-- ,inode=1927407,size=10163,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/Convert/ASN1.pm",O_RDONLY,00) = 5 (0x5)
ioctl(5,TIOCGETA,0xffffcd20)			 ERR#25 'Inappropriate ioctl for device'
lseek(5,0x0,SEEK_CUR)				 = 0 (0x0)
read(5,"# Copyright (c) 2000-2002 Graham"...,8192) = 8192 (0x2000)
stat("/usr/local/lib/perl5/5.14/BSDPAN/constant.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/constant.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/constant.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/constant.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/constant.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/constant.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/constant.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/constant.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/constant.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/constant.pm",{ mode=-r--r--r-- ,inode=1471616,size=13383,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/constant.pm",O_RDONLY,00) = 6 (0x6)
ioctl(6,TIOCGETA,0xffffc800)			 ERR#25 'Inappropriate ioctl for device'
lseek(6,0x0,SEEK_CUR)				 = 0 (0x0)
read(6,"package constant;\nuse 5.005;\nu"...,8192) = 8192 (0x2000)
lseek(6,0x1158,SEEK_SET)			 = 4440 (0x1158)
lseek(6,0x0,SEEK_CUR)				 = 4440 (0x1158)
close(6)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/bytes.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/bytes.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/bytes.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/bytes.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/bytes.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/bytes.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/bytes.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/bytes.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/bytes.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/bytes.pm",{ mode=-r--r--r-- ,inode=1471581,size=3033,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/bytes.pm",O_RDONLY,00) = 6 (0x6)
ioctl(6,TIOCGETA,0xffffc850)			 ERR#25 'Inappropriate ioctl for device'
lseek(6,0x0,SEEK_CUR)				 = 0 (0x0)
read(6,"package bytes;\n\nour $VERSION ="...,8192) = 3033 (0xbd9)
lseek(6,0x1be,SEEK_SET)				 = 446 (0x1be)
lseek(6,0x0,SEEK_CUR)				 = 446 (0x1be)
close(6)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Encode.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Encode.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Encode.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Encode.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Encode.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Encode.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Encode.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Encode.pm",{ mode=-r--r--r-- ,inode=1471625,size=30155,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/mach/Encode.pm",O_RDONLY,00) = 6 (0x6)
ioctl(6,TIOCGETA,0xffffc850)			 ERR#25 'Inappropriate ioctl for device'
lseek(6,0x0,SEEK_CUR)				 = 0 (0x0)
read(6,"#\n# $Id: Encode.pm,v 2.42 2010/"...,8192) = 8192 (0x2000)
stat("/usr/local/lib/perl5/5.14/BSDPAN/base.pmc",0x7fffffffc580) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/base.pm",0x7fffffffc4f0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/base.pmc",0x7fffffffc580) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/base.pm",0x7fffffffc4f0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/base.pmc",0x7fffffffc580) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/base.pm",0x7fffffffc4f0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/base.pmc",0x7fffffffc580) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/base.pm",0x7fffffffc4f0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/base.pmc",0x7fffffffc580) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/base.pm",{ mode=-r--r--r-- ,inode=1471611,size=6990,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/base.pm",O_RDONLY,00) = 7 (0x7)
ioctl(7,TIOCGETA,0xffffc330)			 ERR#25 'Inappropriate ioctl for device'
lseek(7,0x0,SEEK_CUR)				 = 0 (0x0)
read(7,"package base;\n\nuse strict 'var"...,8192) = 6990 (0x1b4e)
mmap(0x0,8388608,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34393350144 (0x80200e000)
munmap(0x80200e000,4136960)			 = 0 (0x0)
munmap(0x802800000,57344)			 = 0 (0x0)
lseek(7,0x1316,SEEK_SET)			 = 4886 (0x1316)
lseek(7,0x0,SEEK_CUR)				 = 4886 (0x1316)
close(7)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Encode/Alias.pmc",0x7fffffffc580) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Encode/Alias.pm",0x7fffffffc4f0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Encode/Alias.pmc",0x7fffffffc580) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Encode/Alias.pm",0x7fffffffc4f0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Encode/Alias.pmc",0x7fffffffc580) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Encode/Alias.pm",0x7fffffffc4f0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Encode/Alias.pmc",0x7fffffffc580) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Encode/Alias.pm",{ mode=-r--r--r-- ,inode=2010913,size=12032,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/mach/Encode/Alias.pm",O_RDONLY,00) = 7 (0x7)
ioctl(7,TIOCGETA,0xffffc330)			 ERR#25 'Inappropriate ioctl for device'
lseek(7,0x0,SEEK_CUR)				 = 0 (0x0)
read(7,"package Encode::Alias;\nuse stri"...,8192) = 8192 (0x2000)
read(7,""' );\n        define_alias( qr/"...,8192) = 3840 (0xf00)
lseek(7,0x215f,SEEK_SET)			 = 8543 (0x215f)
lseek(7,0x0,SEEK_CUR)				 = 8543 (0x215f)
close(7)					 = 0 (0x0)
read(6,"              return $str;\n    "...,8192) = 8192 (0x2000)
lseek(6,0x24aa,SEEK_SET)			 = 9386 (0x24aa)
lseek(6,0x0,SEEK_CUR)				 = 9386 (0x24aa)
close(6)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/mach/auto/Encode/Encode.bs",0x800b7b820) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/auto/Encode/Encode.so",{ mode=-r-xr-xr-x ,inode=1870636,size=44538,blksize=32768 }) = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/mach/auto/Encode/Encode.bs",0x800b7b820) ERR#2 'No such file or directory'
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/mach/auto/Encode/Encode.so",O_RDONLY,065) = 6 (0x6)
fstat(6,{ mode=-r-xr-xr-x ,inode=1870636,size=44538,blksize=32768 }) = 0 (0x0)
mmap(0x0,4096,PROT_READ,MAP_PRIVATE|0x40000,6,0x0) = 34366316544 (0x800646000)
mmap(0x0,2134016,PROT_NONE,MAP_PRIVATE|MAP_ANON|MAP_NOCORE,-1,0x0) = 34393350144 (0x80200e000)
mmap(0x80200e000,32768,PROT_READ|PROT_EXEC,MAP_PRIVATE|MAP_FIXED|MAP_NOCORE|0x40000,6,0x0) = 34393350144 (0x80200e000)
mmap(0x802216000,4096,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|0x40000,6,0x8000) = 34395480064 (0x802216000)
munmap(0x800646000,4096)			 = 0 (0x0)
close(6)					 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Encode/Config.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Encode/Config.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Encode/Config.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Encode/Config.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Encode/Config.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Encode/Config.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Encode/Config.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Encode/Config.pm",{ mode=-r--r--r-- ,inode=2010925,size=6065,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/mach/Encode/Config.pm",O_RDONLY,00) = 6 (0x6)
ioctl(6,TIOCGETA,0xffffc850)			 ERR#25 'Inappropriate ioctl for device'
lseek(6,0x0,SEEK_CUR)				 = 0 (0x0)
read(6,"#\n# Demand-load module list\n#"...,8192) = 6065 (0x17b1)
lseek(6,0x1771,SEEK_SET)			 = 6001 (0x1771)
lseek(6,0x0,SEEK_CUR)				 = 6001 (0x1771)
close(6)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Encode/ConfigLocal.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Encode/ConfigLocal.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Encode/ConfigLocal.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Encode/ConfigLocal.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Encode/ConfigLocal.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Encode/ConfigLocal.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Encode/ConfigLocal.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Encode/ConfigLocal.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/Encode/ConfigLocal.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/Encode/ConfigLocal.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Encode/Encoding.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Encode/Encoding.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Encode/Encoding.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Encode/Encoding.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Encode/Encoding.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Encode/Encoding.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Encode/Encoding.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/Encode/Encoding.pm",{ mode=-r--r--r-- ,inode=2010920,size=9095,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/mach/Encode/Encoding.pm",O_RDONLY,00) = 6 (0x6)
ioctl(6,TIOCGETA,0xffffc850)			 ERR#25 'Inappropriate ioctl for device'
lseek(6,0x0,SEEK_CUR)				 = 0 (0x0)
read(6,"package Encode::Encoding;\n\n# B"...,8192) = 8192 (0x2000)
lseek(6,0x5d8,SEEK_SET)				 = 1496 (0x5d8)
lseek(6,0x0,SEEK_CUR)				 = 1496 (0x5d8)
close(6)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/utf8.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/utf8.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/utf8.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/utf8.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/utf8.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/utf8.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/utf8.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/utf8.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/utf8.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/utf8.pm",{ mode=-r--r--r-- ,inode=1471531,size=7781,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/utf8.pm",O_RDONLY,00) = 6 (0x6)
ioctl(6,TIOCGETA,0xffffc850)			 ERR#25 'Inappropriate ioctl for device'
lseek(6,0x0,SEEK_CUR)				 = 0 (0x0)
read(6,"package utf8;\n\n$utf8::hint_bit"...,8192) = 7781 (0x1e65)
lseek(6,0x17a,SEEK_SET)				 = 378 (0x17a)
lseek(6,0x0,SEEK_CUR)				 = 378 (0x17a)
close(6)					 = 0 (0x0)
read(5," os2ip {\n    my($os, $biclass) "...,8192) = 1971 (0x7b3)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Convert/ASN1/_decode.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Convert/ASN1/_decode.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Convert/ASN1/_decode.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Convert/ASN1/_decode.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Convert/ASN1/_decode.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Convert/ASN1/_decode.pm",{ mode=-r--r--r-- ,inode=1927410,size=15765,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/Convert/ASN1/_decode.pm",O_RDONLY,00) = 6 (0x6)
ioctl(6,TIOCGETA,0xffffc850)			 ERR#25 'Inappropriate ioctl for device'
lseek(6,0x0,SEEK_CUR)				 = 0 (0x0)
read(6,"# Copyright (c) 2000-2005 Graham"...,8192) = 8192 (0x2000)
read(6,"xp);\n    return;\n  }\n  elsif("...,8192) = 7573 (0x1d95)
read(6,0x8018ad000,8192)			 = 0 (0x0)
close(6)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Convert/ASN1/_encode.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Convert/ASN1/_encode.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Convert/ASN1/_encode.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Convert/ASN1/_encode.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Convert/ASN1/_encode.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Convert/ASN1/_encode.pm",{ mode=-r--r--r-- ,inode=1927413,size=9432,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/Convert/ASN1/_encode.pm",O_RDONLY,00) = 6 (0x6)
ioctl(6,TIOCGETA,0xffffc850)			 ERR#25 'Inappropriate ioctl for device'
lseek(6,0x0,SEEK_CUR)				 = 0 (0x0)
read(6,"# Copyright (c) 2000-2005 Graham"...,8192) = 8192 (0x2000)
read(6,"enc_any {\n# 0      1    2      "...,8192) = 1240 (0x4d8)
read(6,0x8018ad000,8192)			 = 0 (0x0)
close(6)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Convert/ASN1/IO.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Convert/ASN1/IO.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Convert/ASN1/IO.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Convert/ASN1/IO.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Convert/ASN1/IO.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Convert/ASN1/IO.pm",{ mode=-r--r--r-- ,inode=1927411,size=5473,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/Convert/ASN1/IO.pm",O_RDONLY,00) = 6 (0x6)
ioctl(6,TIOCGETA,0xffffc850)			 ERR#25 'Inappropriate ioctl for device'
lseek(6,0x0,SEEK_CUR)				 = 0 (0x0)
read(6,"# Copyright (c) 2000-2005 Graham"...,8192) = 5473 (0x1561)
read(6,0x8018ad000,8192)			 = 0 (0x0)
close(6)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Convert/ASN1/parser.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Convert/ASN1/parser.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Convert/ASN1/parser.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Convert/ASN1/parser.pm",0x7fffffffca10) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Convert/ASN1/parser.pmc",0x7fffffffcaa0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Convert/ASN1/parser.pm",{ mode=-r--r--r-- ,inode=1927409,size=25267,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/Convert/ASN1/parser.pm",O_RDONLY,00) = 6 (0x6)
ioctl(6,TIOCGETA,0xffffc850)			 ERR#25 'Inappropriate ioctl for device'
lseek(6,0x0,SEEK_CUR)				 = 0 (0x0)
read(6,"#$yysccsid = "@(#)yaccpar 1.8 (B"...,8192) = 8192 (0x2000)
read(6," 55,   72,   39,   32,   33,   5"...,8192) = 8192 (0x2000)
read(6,"te56: {\n# 306 "parser.y"\n{ $yy"...,8192) = 8192 (0x2000)
read(6,"th($asn);\n\n  0\n}\n\nsub yyerr"...,8192) = 691 (0x2b3)
read(6,0x8018ad000,8192)			 = 0 (0x0)
close(6)					 = 0 (0x0)
read(5,0x8018ab000,8192)			 = 0 (0x0)
close(5)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Message.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Message.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Message.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Message.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Message.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Message.pm",{ mode=-r--r--r-- ,inode=1928539,size=5673,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Message.pm",O_RDONLY,00) = 5 (0x5)
ioctl(5,TIOCGETA,0xffffcd20)			 ERR#25 'Inappropriate ioctl for device'
lseek(5,0x0,SEEK_CUR)				 = 0 (0x0)
read(5,"# Copyright (c) 1997-2004 Graham"...,8192) = 5673 (0x1629)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Constant.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Constant.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Constant.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Constant.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Constant.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Constant.pm",{ mode=-r--r--r-- ,inode=1928556,size=21810,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Constant.pm",O_RDONLY,00) = 6 (0x6)
ioctl(6,TIOCGETA,0xffffc800)			 ERR#25 'Inappropriate ioctl for device'
lseek(6,0x0,SEEK_CUR)				 = 0 (0x0)
read(6,"# Copyright (c) 1998-2009 Graham"...,8192) = 8192 (0x2000)
fcntl(6,F_SETFD,FD_CLOEXEC)			 = 0 (0x0)
read(6,"encoding the request packet that"...,8192) = 8192 (0x2000)
read(6,"ER (2.16.840.1.113719.1.27.100.5"...,8192) = 5426 (0x1532)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/ASN.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/ASN.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/ASN.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/ASN.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/ASN.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/ASN.pm",{ mode=-r--r--r-- ,inode=1928543,size=15026,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/ASN.pm",O_RDONLY,00) = 7 (0x7)
ioctl(7,TIOCGETA,0xffffc800)			 ERR#25 'Inappropriate ioctl for device'
lseek(7,0x0,SEEK_CUR)				 = 0 (0x0)
read(7,"\npackage Net::LDAP::ASN;\n\nour"...,8192) = 8192 (0x2000)
read(7,"ICATION 10] LDAPDN\n\n    DelRes"...,8192) = 6834 (0x1ab2)
read(7,0x8018af000,8192)			 = 0 (0x0)
close(7)					 = 0 (0x0)
read(5,0x8018ab000,8192)			 = 0 (0x0)
close(5)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/IO/Socket/INET6.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/IO/Socket/INET6.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/IO/Socket/INET6.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/IO/Socket/INET6.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/IO/Socket/INET6.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/IO/Socket/INET6.pm",{ mode=-r--r--r-- ,inode=1928194,size=19283,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/IO/Socket/INET6.pm",O_RDONLY,00) = 5 (0x5)
ioctl(5,TIOCGETA,0xffffcd20)			 ERR#25 'Inappropriate ioctl for device'
lseek(5,0x0,SEEK_CUR)				 = 0 (0x0)
read(5,"# IO::Socket::INET6.pm\n#\n# Cop"...,8192) = 8192 (0x2000)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Socket6.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Socket6.pm",0x7fffffffc9c0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Socket6.pmc",0x7fffffffca50) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Socket6.pm",{ mode=-r--r--r-- ,inode=1470784,size=9804,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/mach/Socket6.pm",O_RDONLY,00) = 7 (0x7)
ioctl(7,TIOCGETA,0xffffc800)			 ERR#25 'Inappropriate ioctl for device'
lseek(7,0x0,SEEK_CUR)				 = 0 (0x0)
read(7,"# Copyright (C) 2000-2008 Hajimu"...,8192) = 8192 (0x2000)
stat("/usr/local/lib/perl5/5.14/BSDPAN/DynaLoader.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/DynaLoader.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/DynaLoader.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/DynaLoader.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/DynaLoader.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/DynaLoader.pm",0x7fffffffc4a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/DynaLoader.pmc",0x7fffffffc530) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/mach/DynaLoader.pm",{ mode=-r--r--r-- ,inode=1471620,size=24941,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/5.14/mach/DynaLoader.pm",O_RDONLY,00) = 8 (0x8)
ioctl(8,TIOCGETA,0xffffc2e0)			 ERR#25 'Inappropriate ioctl for device'
lseek(8,0x0,SEEK_CUR)				 = 0 (0x0)
read(8,"\n# Generated from DynaLoader_pm"...,8192) = 8192 (0x2000)
read(8,"at filenames to look for\n      "...,8192) = 8192 (0x2000)
lseek(8,0x299a,SEEK_SET)			 = 10650 (0x299a)
lseek(8,0x0,SEEK_CUR)				 = 10650 (0x299a)
close(8)					 = 0 (0x0)
read(7,"6addr_any in6addr_loopback\n\tga"...,8192) = 1612 (0x64c)
read(7,0x8018af000,8192)			 = 0 (0x0)
close(7)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/auto/Socket6",0x800b7b820) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/auto/Socket6",{ mode=drwxr-xr-x ,inode=1928150,size=512,blksize=32768 }) = 0 (0x0)
stat("/usr/local/lib/perl5/site_perl/5.14/mach/auto/Socket6/Socket6.so",{ mode=-r-xr-xr-x ,inode=1928152,size=26004,blksize=32768 }) = 0 (0x0)
stat("/usr/local/lib/perl5/site_perl/5.14/mach/auto/Socket6/Socket6.bs",{ mode=-r--r--r-- ,inode=1928151,size=0,blksize=32768 }) = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/mach/auto/Socket6/Socket6.so",O_RDONLY,0101) = 7 (0x7)
fstat(7,{ mode=-r-xr-xr-x ,inode=1928152,size=26004,blksize=32768 }) = 0 (0x0)
mmap(0x0,4096,PROT_READ,MAP_PRIVATE|0x40000,7,0x0) = 34366316544 (0x800646000)
mmap(0x0,2117632,PROT_NONE,MAP_PRIVATE|MAP_ANON|MAP_NOCORE,-1,0x0) = 34401681408 (0x802800000)
mmap(0x802800000,20480,PROT_READ|PROT_EXEC,MAP_PRIVATE|MAP_FIXED|MAP_NOCORE|0x40000,7,0x0) = 34401681408 (0x802800000)
mmap(0x802a04000,4096,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|0x40000,7,0x4000) = 34403794944 (0x802a04000)
munmap(0x800646000,4096)			 = 0 (0x0)
close(7)					 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
read(5,"iHomed};\n        \n    }\n\n   "...,8192) = 8192 (0x2000)
lseek(5,0x2d2f,SEEK_SET)			 = 11567 (0x2d2f)
lseek(5,0x0,SEEK_CUR)				 = 11567 (0x2d2f)
close(5)					 = 0 (0x0)
read(4,"ap = shift;\n  shift->new($ldap,"...,8192) = 8192 (0x2000)
read(4,"  modification => {\n\t      typ"...,8192) = 8192 (0x2000)
read(4,"self = shift;\n  my %arg = @_;\n"...,8192) = 3503 (0xdaf)
read(4,0x8018a9000,8192)			 = 0 (0x0)
close(4)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Control/Paged.pmc",0x7fffffffd490) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Control/Paged.pm",0x7fffffffd400) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Control/Paged.pmc",0x7fffffffd490) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Control/Paged.pm",0x7fffffffd400) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Control/Paged.pmc",0x7fffffffd490) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Control/Paged.pm",{ mode=-r--r--r-- ,inode=1928569,size=3974,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Control/Paged.pm",O_RDONLY,00) = 4 (0x4)
ioctl(4,TIOCGETA,0xffffd240)			 ERR#25 'Inappropriate ioctl for device'
lseek(4,0x0,SEEK_CUR)				 = 0 (0x0)
read(4,"# Copyright (c) 2000-2004 Graham"...,8192) = 3974 (0xf86)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Control.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Control.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Control.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Control.pm",0x7fffffffcee0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Control.pmc",0x7fffffffcf70) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Control.pm",{ mode=-r--r--r-- ,inode=1928546,size=8905,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Control.pm",O_RDONLY,00) = 5 (0x5)
ioctl(5,TIOCGETA,0xffffcd20)			 ERR#25 'Inappropriate ioctl for device'
lseek(5,0x0,SEEK_CUR)				 = 0 (0x0)
read(5,"# Copyright (c) 1999-2004 Graham"...,8192) = 8192 (0x2000)
lseek(5,0xe51,SEEK_SET)				 = 3665 (0xe51)
lseek(5,0x0,SEEK_CUR)				 = 3665 (0xe51)
close(5)					 = 0 (0x0)
lseek(4,0x4be,SEEK_SET)				 = 1214 (0x4be)
lseek(4,0x0,SEEK_CUR)				 = 1214 (0x4be)
close(4)					 = 0 (0x0)
read(3,0x8018a7000,8192)			 = 0 (0x0)
close(3)					 = 0 (0x0)
stat("/etc/nsswitch.conf",{ mode=-rw-r--r-- ,inode=963114,size=323,blksize=32768 }) = 0 (0x0)
open("/etc/nsswitch.conf",O_RDONLY,0666)	 = 3 (0x3)
ioctl(3,TIOCGETA,0xffffd6c0)			 ERR#25 'Inappropriate ioctl for device'
fstat(3,{ mode=-rw-r--r-- ,inode=963114,size=323,blksize=32768 }) = 0 (0x0)
read(3,"#\n# nsswitch.conf(5) - name ser"...,32768) = 323 (0x143)
read(3,0x802637000,32768)			 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
access("/usr/local/lib/perl5/5.14/mach/CORE/nss_compat.so.1",0) ERR#2 'No such file or directory'
access("/lib/nss_compat.so.1",0)		 ERR#2 'No such file or directory'
access("/usr/lib/nss_compat.so.1",0)		 ERR#2 'No such file or directory'
access("/usr/lib/compat/nss_compat.so.1",0)	 ERR#2 'No such file or directory'
access("/usr/local/lib/nss_compat.so.1",0)	 ERR#2 'No such file or directory'
access("/lib/nss_compat.so.1",0)		 ERR#2 'No such file or directory'
access("/usr/lib/nss_compat.so.1",0)		 ERR#2 'No such file or directory'
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
access("/usr/local/lib/perl5/5.14/mach/CORE/nss_nis.so.1",0) ERR#2 'No such file or directory'
access("/lib/nss_nis.so.1",0)			 ERR#2 'No such file or directory'
access("/usr/lib/nss_nis.so.1",0)		 ERR#2 'No such file or directory'
access("/usr/lib/compat/nss_nis.so.1",0)	 ERR#2 'No such file or directory'
access("/usr/local/lib/nss_nis.so.1",0)		 ERR#2 'No such file or directory'
access("/lib/nss_nis.so.1",0)			 ERR#2 'No such file or directory'
access("/usr/lib/nss_nis.so.1",0)		 ERR#2 'No such file or directory'
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
access("/usr/local/lib/perl5/5.14/mach/CORE/nss_files.so.1",0) ERR#2 'No such file or directory'
access("/lib/nss_files.so.1",0)			 ERR#2 'No such file or directory'
access("/usr/lib/nss_files.so.1",0)		 ERR#2 'No such file or directory'
access("/usr/lib/compat/nss_files.so.1",0)	 ERR#2 'No such file or directory'
access("/usr/local/lib/nss_files.so.1",0)	 ERR#2 'No such file or directory'
access("/lib/nss_files.so.1",0)			 ERR#2 'No such file or directory'
access("/usr/lib/nss_files.so.1",0)		 ERR#2 'No such file or directory'
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
access("/usr/local/lib/perl5/5.14/mach/CORE/nss_dns.so.1",0) ERR#2 'No such file or directory'
access("/lib/nss_dns.so.1",0)			 ERR#2 'No such file or directory'
access("/usr/lib/nss_dns.so.1",0)		 ERR#2 'No such file or directory'
access("/usr/lib/compat/nss_dns.so.1",0)	 ERR#2 'No such file or directory'
access("/usr/local/lib/nss_dns.so.1",0)		 ERR#2 'No such file or directory'
access("/lib/nss_dns.so.1",0)			 ERR#2 'No such file or directory'
access("/usr/lib/nss_dns.so.1",0)		 ERR#2 'No such file or directory'
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
ioctl(3,TIOCGETA,0xffffd6d0)			 ERR#25 'Inappropriate ioctl for device'
close(3)					 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
open("/etc/protocols",O_RDONLY,0666)		 = 3 (0x3)
fstat(3,{ mode=-rw-r--r-- ,inode=963117,size=6088,blksize=32768 }) = 0 (0x0)
read(3,"#\n# Internet protocols\n#\n# $F"...,32768) = 6088 (0x17c8)
close(3)					 = 0 (0x0)
stat("/etc/nsswitch.conf",{ mode=-rw-r--r-- ,inode=963114,size=323,blksize=32768 }) = 0 (0x0)
open("/etc/protocols",O_RDONLY,0666)		 = 3 (0x3)
fstat(3,{ mode=-rw-r--r-- ,inode=963117,size=6088,blksize=32768 }) = 0 (0x0)
read(3,"#\n# Internet protocols\n#\n# $F"...,32768) = 6088 (0x17c8)
close(3)					 = 0 (0x0)
socket(PF_INET6,SOCK_DGRAM,0)			 = 3 (0x3)
close(3)					 = 0 (0x0)
socket(PF_INET,SOCK_DGRAM,0)			 = 3 (0x3)
close(3)					 = 0 (0x0)
socket(PF_INET,SOCK_STREAM,6)			 = 3 (0x3)
ioctl(3,TIOCGETA,0xffffd8a0)			 ERR#45 'Operation not supported'
lseek(3,0x0,SEEK_CUR)				 ERR#29 'Illegal seek'
ioctl(3,TIOCGETA,0xffffd8a0)			 ERR#45 'Operation not supported'
lseek(3,0x0,SEEK_CUR)				 ERR#29 'Illegal seek'
fcntl(3,F_SETFD,FD_CLOEXEC)			 = 0 (0x0)
fcntl(3,F_GETFL,)				 = 2 (0x2)
fcntl(3,F_SETFL,O_NONBLOCK|0x2)			 = 0 (0x0)
connect(3,{ AF_INET 172.16.18.7:389 },16)	 ERR#36 'Operation now in progress'
stat("/usr/share/nls/C/libc.cat",0x7fffffffd0a0) ERR#2 'No such file or directory'
stat("/usr/share/nls/libc/C",0x7fffffffd0a0)	 ERR#2 'No such file or directory'
stat("/usr/local/share/nls/C/libc.cat",0x7fffffffd0a0) ERR#2 'No such file or directory'
stat("/usr/local/share/nls/libc/C",0x7fffffffd0a0) ERR#2 'No such file or directory'
select(8,0x0,{3},0x0,{120.000000 })		 = 1 (0x1)
connect(3,{ AF_INET 172.16.18.7:389 },16)	 ERR#56 'Socket is already connected'
fcntl(3,F_GETFL,)				 = 6 (0x6)
fcntl(3,F_SETFL,0x2)				 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Bind.pmc",0x7fffffffd930) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Bind.pm",0x7fffffffd8a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Bind.pmc",0x7fffffffd930) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Bind.pm",0x7fffffffd8a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Bind.pmc",0x7fffffffd930) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Bind.pm",{ mode=-r--r--r-- ,inode=1928547,size=1907,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Bind.pm",O_RDONLY,00) = 4 (0x4)
ioctl(4,TIOCGETA,0xffffd6e0)			 ERR#25 'Inappropriate ioctl for device'
lseek(4,0x0,SEEK_CUR)				 = 0 (0x0)
read(4,"# Copyright (c) 1998-2004 Graham"...,8192) = 1907 (0x773)
read(4,0x8018a7000,8192)			 = 0 (0x0)
close(4)					 = 0 (0x0)
write(3,"0^\^B\^A\^A`Y\^B\^A\^C\^DJCN=Ano"...,96) = 96 (0x60)
read(3,"0\M^D",2)				 = 2 (0x2)
read(3,"\0\0\0\^P",4)				 = 4 (0x4)
read(3,"\^B\^A\^Aa\M^D\0\0\0\a\n\^A\0\^D"...,16) = 16 (0x10)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Search.pmc",0x7fffffffd930) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Search.pm",0x7fffffffd8a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Search.pmc",0x7fffffffd930) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Search.pm",0x7fffffffd8a0) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Search.pmc",0x7fffffffd930) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Search.pm",{ mode=-r--r--r-- ,inode=1928540,size=3859,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Search.pm",O_RDONLY,00) = 4 (0x4)
ioctl(4,TIOCGETA,0xffffd6e0)			 ERR#25 'Inappropriate ioctl for device'
lseek(4,0x0,SEEK_CUR)				 = 0 (0x0)
read(4,"# Copyright (c) 1997-2004 Graham"...,8192) = 3859 (0xf13)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Entry.pmc",0x7fffffffd410) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Entry.pm",0x7fffffffd380) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Entry.pmc",0x7fffffffd410) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Entry.pm",0x7fffffffd380) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Entry.pmc",0x7fffffffd410) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Entry.pm",{ mode=-r--r--r-- ,inode=1928544,size=8404,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Entry.pm",O_RDONLY,00) = 5 (0x5)
ioctl(5,TIOCGETA,0xffffd1c0)			 ERR#25 'Inappropriate ioctl for device'
lseek(5,0x0,SEEK_CUR)				 = 0 (0x0)
read(5,"# Copyright (c) 1997-2004 Graham"...,8192) = 8192 (0x2000)
read(5,"   } @{$self->{asn}{attributes}}"...,8192) = 212 (0xd4)
read(5,0x8018a9000,8192)			 = 0 (0x0)
close(5)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Intermediate.pmc",0x7fffffffd410) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Intermediate.pm",0x7fffffffd380) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Intermediate.pmc",0x7fffffffd410) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Intermediate.pm",0x7fffffffd380) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Intermediate.pmc",0x7fffffffd410) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Intermediate.pm",{ mode=-r--r--r-- ,inode=1928550,size=6141,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Intermediate.pm",O_RDONLY,00) = 5 (0x5)
ioctl(5,TIOCGETA,0xffffd1c0)			 ERR#25 'Inappropriate ioctl for device'
lseek(5,0x0,SEEK_CUR)				 = 0 (0x0)
read(5,"# Copyright (c) 2008 Mathieu Par"...,8192) = 6141 (0x17fd)
lseek(5,0x8de,SEEK_SET)				 = 2270 (0x8de)
lseek(5,0x0,SEEK_CUR)				 = 2270 (0x8de)
close(5)					 = 0 (0x0)
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Filter.pmc",0x7fffffffd410) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/5.14/BSDPAN/Net/LDAP/Filter.pm",0x7fffffffd380) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Filter.pmc",0x7fffffffd410) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/mach/Net/LDAP/Filter.pm",0x7fffffffd380) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Filter.pmc",0x7fffffffd410) ERR#2 'No such file or directory'
stat("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Filter.pm",{ mode=-r--r--r-- ,inode=1928549,size=7113,blksize=32768 }) = 0 (0x0)
open("/usr/local/lib/perl5/site_perl/5.14/Net/LDAP/Filter.pm",O_RDONLY,00) = 5 (0x5)
ioctl(5,TIOCGETA,0xffffd1c0)			 ERR#25 'Inappropriate ioctl for device'
lseek(5,0x0,SEEK_CUR)				 = 0 (0x0)
read(5,"# Copyright (c) 1997-2004 Graham"...,8192) = 7113 (0x1bc9)
read(5,0x8018a9000,8192)			 = 0 (0x0)
close(5)					 = 0 (0x0)
read(4,0x8018a7000,8192)			 = 0 (0x0)
close(4)					 = 0 (0x0)
open("/usr/local/etc/postfix/exchange_recipients",O_WRONLY|O_CREAT|O_TRUNC,0666) = 4 (0x4)
ioctl(4,TIOCGETA,0xffffd6a0)			 ERR#25 'Inappropriate ioctl for device'
lseek(4,0x0,SEEK_CUR)				 = 0 (0x0)
fstat(4,{ mode=-rw-r--r-- ,inode=1926655,size=0,blksize=32768 }) = 0 (0x0)
fcntl(4,F_SETFD,FD_CLOEXEC)			 = 0 (0x0)
close(4)					 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGHUP,0x0,{ SIG_DFL 0x0 ss_t })	 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGINT,0x0,{ SIG_DFL SA_RESTART ss_t }) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGQUIT,0x0,{ SIG_DFL SA_RESTART ss_t }) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGILL,0x0,{ SIG_DFL 0x0 ss_t })	 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGTRAP,0x0,{ SIG_DFL SA_RESTART ss_t }) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGABRT,0x0,{ SIG_DFL 0x0 ss_t })	 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGEMT,0x0,{ SIG_DFL SA_RESTART ss_t }) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGFPE,0x0,{ SIG_DFL 0x0 ss_t })	 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGKILL,0x0,{ SIG_DFL SA_RESTART ss_t }) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGBUS,0x0,{ SIG_DFL 0x0 ss_t })	 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGSEGV,0x0,{ SIG_DFL 0x0 ss_t })	 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGSYS,0x0,{ SIG_DFL 0x0 ss_t })	 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGPIPE,0x0,{ SIG_DFL SA_RESTART ss_t }) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGALRM,0x0,{ SIG_DFL 0x0 ss_t })	 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGTERM,0x0,{ SIG_DFL 0x0 ss_t })	 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGURG,0x0,{ SIG_DFL SA_RESTART ss_t }) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGSTOP,0x0,{ SIG_DFL SA_RESTART ss_t }) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGTSTP,0x0,{ SIG_DFL SA_RESTART ss_t }) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGCONT,0x0,{ SIG_DFL SA_RESTART ss_t }) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGCHLD,0x0,{ SIG_DFL 0x0 ss_t })	 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGTTIN,0x0,{ SIG_DFL SA_RESTART ss_t }) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGTTOU,0x0,{ SIG_DFL SA_RESTART ss_t }) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGIO,0x0,{ SIG_DFL SA_RESTART ss_t }) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGXCPU,0x0,{ SIG_DFL 0x0 ss_t })	 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGXFSZ,0x0,{ SIG_DFL 0x0 ss_t })	 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGVTALRM,0x0,{ SIG_DFL SA_RESTART ss_t }) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGPROF,0x0,{ SIG_DFL SA_RESTART ss_t }) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGWINCH,0x0,{ SIG_DFL SA_RESTART ss_t }) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGINFO,0x0,{ SIG_DFL SA_RESTART ss_t }) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGUSR1,0x0,{ SIG_DFL 0x0 ss_t })	 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGUSR2,0x0,{ SIG_DFL 0x0 ss_t })	 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_SETMASK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigaction(SIGABRT,0x0,{ SIG_DFL 0x0 ss_t })	 = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
lseek(6,0x5531,SEEK_SET)			 = 21809 (0x5531)
lseek(6,0x0,SEEK_CUR)				 = 21809 (0x5531)
close(3)					 = 0 (0x0)
close(6)					 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0) = 0 (0x0)
sigprocmask(SIG_SETMASK,0x0,0x0)		 = 0 (0x0)
process exit, rval = 0

Re: Скрипт для Postfix и Exchenge

Добавлено: 2013-12-09 17:39:39
Mvairs
Решил проблему подобным скриптом на Питоне :)