forum.lissyara.su

Код: Выделить всё

2011-08-24 14:30:58 exim 4.76 daemon started: pid=4239, -q30m, listening for SMTP on port 25 (IPv4)
2011-08-24 14:30:58 Start queue run: pid=4240
2011-08-24 14:30:58 1Qw7O5-000BaP-A7 Message is frozen
2011-08-24 14:30:58 1Qw3cH-0009r8-6f Message is frozen
2011-08-24 14:30:58 End queue run: pid=4240
2011-08-24 14:32:25 plain_login authenticator failed for localhost (www.domain.ru) [127.0.0.1]: 535 Incorrect authentication data

Код: Выделить всё

8.2-RC1

Код: Выделить всё

apache-1.3.42       The extremely popular Apache http server. Very fast, very c
mysql-client-5.1.55 Multithreaded SQL database (client)
mysql-server-5.1.55 Multithreaded SQL database (server)
php52-5.2.17        PHP Scripting Language
roundcube-0.5.4,1   Fully skinnable XHTML/CSS webmail written in PHP
vexim-2.2.1_1       A web interface for managing virtual domains for exim
exim-mysql-4.76     High performance MTA for Unix systems on the Internet
dovecot-1.2.17      Secure and compact IMAP and POP3 servers

Код: Выделить всё

## Dovecot configuration file

# If you're in a hurry, see http://wiki.dovecot.org/QuickConfiguration

# "dovecot -n" command gives a clean output of the changed settings. Use it
# instead of copy&pasting this file when posting to the Dovecot mailing list.

# '#' character and everything after it is treated as comments. Extra spaces
# and tabs are ignored. If you want to use either of these explicitly, put the
# value inside quotes, eg.: key = "# char and trailing whitespace  "

# Default values are shown for each setting, it's not required to uncomment
# those. These are exceptions to this though: No sections (e.g. namespace {})
# or plugin settings are added by default, they're listed only as examples.
# Paths are also just examples with the real defaults being based on configure
# options. The paths listed here are for configure --prefix=/usr/local
# --sysconfdir=/usr/local/etc --localstatedir=/var --with-ssldir=/etc/ssl

# Base directory where to store runtime data.
base_dir = /var/run/dovecot/

# Protocols we want to be serving: imap imaps pop3 pop3s
# If you only want to use dovecot-auth, you can set this to "none".
protocols = imap  pop3 

# A space separated list of IP or host addresses where to listen in for
# connections. "*" listens in all IPv4 interfaces. "[::]" listens in all IPv6
# interfaces. Use "*, [::]" for listening both IPv4 and IPv6.
#
# If you want to specify ports for each service, you will need to configure
# these settings inside the protocol imap/pop3 { ... } section, so you can
# specify different ports for IMAP/POP3. For example:
#   protocol imap {
#     listen = *:10143
#     ssl_listen = *:10943
#     ..
#   }
#   protocol pop3 {
#     listen = *:10100
#     ..
#   }
listen = *

# Disable LOGIN command and all other plaintext authentications unless
# SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP
# matches the local IP (ie. you're connecting from the same computer), the
# connection is considered secure and plaintext authentication is allowed.
disable_plaintext_auth = no

# Should all IMAP and POP3 processes be killed when Dovecot master process
# shuts down. Setting this to "no" means that Dovecot can be upgraded without
# forcing existing client connections to close (although that could also be
# a problem if the upgrade is eg. because of a security fix). This however
# means that after master process has died, the client processes can't write
# to log files anymore.
#shutdown_clients = yes

##
## Logging
##

# Log file to use for error messages, instead of sending them to syslog.
# /dev/stderr can be used to log into stderr.
log_path =/var/log/dovecot 

# Log file to use for informational and debug messages.
# Default is the same as log_path.
#info_log_path = 

# Prefix for each line written to log file. % codes are in strftime(3)
# format.
log_timestamp = "%b %d %H:%M:%S "

# Syslog facility to use if you're logging to syslog. Usually if you don't
# want to use "mail", you'll use local0..local7. Also other standard
# facilities are supported.
syslog_facility = mail

##
## SSL settings
##

# IP or host address where to listen in for SSL connections. Remember to also
# add imaps and/or pop3s to protocols setting. Defaults to same as "listen"
# setting if not specified.
#ssl_listen =

# SSL/TLS support: yes, no, required. <doc/wiki/SSL.txt>
ssl = no

# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before
# dropping root privileges, so keep the key file unreadable by anyone but
# root. Included doc/mkcert.sh can be used to easily generate self-signed
# certificate, just make sure to update the domains in dovecot-openssl.cnf
#ssl_cert_file = /etc/local/etc/ssl/certs/mail.pem
#ssl_key_file = /etc/local/etc/ssl/certs/mail.pem

# If key file is password protected, give the password here. Alternatively
# give it when starting dovecot with -p parameter. Since this file is often
# world-readable, you may want to place this setting instead to a different
# root owned 0600 file by using !include_try <path>.
#ssl_key_password =

# File containing trusted SSL certificate authorities. Set this only if you
# intend to use ssl_verify_client_cert=yes. The CAfile should contain the
# CA-certificate(s) followed by the matching CRL(s).
#ssl_ca_file = 

# Request client to send a certificate. If you also want to require it, set
# ssl_require_client_cert=yes in auth section.
#ssl_verify_client_cert = no

# Which field from certificate to use for username. commonName and
# x500UniqueIdentifier are the usual choices. You'll also need to set
# ssl_username_from_cert=yes.
#ssl_cert_username_field = commonName

# How often to regenerate the SSL parameters file. Generation is quite CPU
# intensive operation. The value is in hours, 0 disables regeneration
# entirely.
#ssl_parameters_regenerate = 168

# SSL ciphers to use
#ssl_cipher_list = ALL:!LOW:!SSLv2

# Show protocol level SSL errors.
#verbose_ssl = no

##
## Login processes
##

# <doc/wiki/LoginProcess.txt>

# Directory where authentication process places authentication UNIX sockets
# which login needs to be able to connect to. The sockets are created when
# running as root, so you don't have to worry about permissions. Note that
# everything in this directory is deleted when Dovecot is started.
#login_dir = /var/run/dovecot/login

# chroot login process to the login_dir. Only reason not to do this is if you
# wish to run the whole Dovecot without roots. <doc/wiki/Rootless.txt>
#login_chroot = yes

# User to use for the login process. Create a completely new user for this,
# and don't use it anywhere else. The user must also belong to a group where
# only it has access, it's used to control access for authentication process.
# Note that this user is NOT used to access mails. <doc/wiki/UserIds.txt>
#login_user = dovecot

# Set max. process size in megabytes. If you don't use
# login_process_per_connection you might need to grow this.
#login_process_size = 64

# Should each login be processed in it's own process (yes), or should one
# login process be allowed to process multiple connections (no)? Yes is more
# secure, espcially with SSL/TLS enabled. No is faster since there's no need
# to create processes all the time.
#login_process_per_connection = yes

# Number of login processes to keep for listening new connections.
#login_processes_count = 3

# Maximum number of login processes to create. The listening process count
# usually stays at login_processes_count, but when multiple users start logging
# in at the same time more extra processes are created. To prevent fork-bombing
# we check only once in a second if new processes should be created - if all
# of them are used at the time, we double their amount until the limit set by
# this setting is reached.
#login_max_processes_count = 128

# Maximum number of connections allowed per each login process. This setting
# is used only if login_process_per_connection=no. Once the limit is reached,
# the process notifies master so that it can create a new login process.
#login_max_connections = 256

# Greeting message for clients.
#login_greeting = Dovecot ready.

# Space separated list of trusted network ranges. Connections from these
# IPs are allowed to override their IP addresses and ports (for logging and
# for authentication checks). disable_plaintext_auth is also ignored for
# these networks. Typically you'd specify your IMAP proxy servers here.
#login_trusted_networks =

# Space-separated list of elements we want to log. The elements which have
# a non-empty variable value are joined together to form a comma-separated
# string.
#login_log_format_elements = user=<%u> method=%m rip=%r lip=%l %c

# Login log format. %$ contains login_log_format_elements string, %s contains
# the data we want to log.
#login_log_format = %$: %s

##
## Mailbox locations and namespaces
##

# Location for users' mailboxes. This is the same as the old default_mail_env
# setting. The default is empty, which means that Dovecot tries to find the
# mailboxes automatically. This won't work if the user doesn't have any mail
# yet, so you should explicitly tell Dovecot the full location.
#
# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u)
# isn't enough. You'll also need to tell Dovecot where the other mailboxes are
# kept. This is called the "root mail directory", and it must be the first
# path given in the mail_location setting.
#
# There are a few special variables you can use, eg.:
#
#   %u - username
#   %n - user part in user@domain, same as %u if there's no domain
#   %d - domain part in user@domain, empty if there's no domain
#   %h - home directory
#
# See <doc/wiki/Variables.txt> for full list. Some examples:
#
#   mail_location = maildir:~/Maildir
#   mail_location = mbox:~/mail:INBOX=/var/mail/%u
#   mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n
#
# <doc/wiki/MailLocation.txt>
#
#mail_location = mbox:~/mail/:INBOX=/var/mail/%u

mail_location = maildir:~/Maildir

# If you need to set multiple mailbox locations or want to change default
# namespace settings, you can do it by defining namespace sections.
#
# You can have private, shared and public namespaces. Private namespaces
# are for user's personal mails. Shared namespaces are for accessing other
# users' mailboxes that have been shared. Public namespaces are for shared
# mailboxes that are managed by sysadmin. If you create any shared or public
# namespaces you'll typically want to enable ACL plugin also, otherwise all
# users can access all the shared mailboxes, assuming they have permissions
# on filesystem level to do so.
#
# REMEMBER: If you add any namespaces, the default namespace must be added
# explicitly, ie. mail_location does nothing unless you have a namespace
# without a location setting. Default namespace is simply done by having a
# namespace with empty prefix.
#namespace private {
   # Hierarchy separator to use. You should use the same separator for all
   # namespaces or some clients get confused. '/' is usually a good one.
   # The default however depends on the underlying mail storage format.
   #separator = 

   # Prefix required to access this namespace. This needs to be different for
   # all namespaces. For example "Public/".
   #prefix = 

   # Physical location of the mailbox. This is in same format as
   # mail_location, which is also the default for it.
   #location =

   # There can be only one INBOX, and this setting defines which namespace
   # has it.
   #inbox = no

   # If namespace is hidden, it's not advertised to clients via NAMESPACE
   # extension. You'll most likely also want to set list=no. This is mostly
   # useful when converting from another server with different namespaces which
   # you want to deprecate but still keep working. For example you can create
   # hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/".
   #hidden = yes

   # Show the mailboxes under this namespace with LIST command. This makes the
   # namespace visible for clients that don't support NAMESPACE extension.
   # "children" value lists child mailboxes, but hides the namespace prefix.
   #list = yes

   # Namespace handles its own subscriptions. If set to "no", the parent
   # namespace handles them (empty prefix should always have this as "yes")
   #subscriptions = yes
#}

# Example shared namespace configuration
#namespace shared {
   #separator = /

   # Mailboxes are visible under "shared/user@domain/"
   # %%n, %%d and %%u are expanded to the destination user.
   #prefix = shared/%%u/

   # Mail location for other users' mailboxes. Note that %variables and ~/
   # expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the
   # destination user's data.
   #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u

   # Use the default namespace for saving subscriptions.
   #subscriptions = no

   # List the shared/ namespace only if there are visible shared mailboxes.
   #list = children
#}

# System user and group used to access mails. If you use multiple, userdb
# can override these by returning uid or gid fields. You can use either numbers
# or names. <doc/wiki/UserIds.txt>
#mail_uid =
#mail_gid =

# Group to enable temporarily for privileged operations. Currently this is
# used only with INBOX when either its initial creation or dotlocking fails.
# Typically this is set to "mail" to give access to /var/mail.
mail_privileged_group = mail

# Grant access to these supplementary groups for mail processes. Typically
# these are used to set up access to shared mailboxes. Note that it may be
# dangerous to set these if users can create symlinks (e.g. if "mail" group is
# set here, ln -s /var/mail ~/mail/var could allow a user to delete others'
# mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it).
#mail_access_groups =

# Allow full filesystem access to clients. There's no access checks other than
# what the operating system does for the active UID/GID. It works with both
# maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/
# or ~user/.
#mail_full_filesystem_access = no

##
## Mail processes
##

# Enable mail process debugging. This can help you figure out why Dovecot
# isn't finding your mails.
mail_debug = yes

# Log prefix for mail processes. See <doc/wiki/Variables.txt> for list of
# possible variables you can use.
mail_log_prefix = "%Us(%u): "

# Max. number of lines a mail process is allowed to log per second before it's
# throttled. 0 means unlimited. Typically there's no need to change this
# unless you're using mail_log plugin, which may log a lot. This setting is
# ignored while mail_debug=yes to avoid pointless throttling.
#mail_log_max_lines_per_sec = 10

# Don't use mmap() at all. This is required if you store indexes to shared
# filesystems (NFS or clustered filesystem).
#mmap_disable = no

# Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL
# since version 3, so this should be safe to use nowadays by default.
dotlock_use_excl = yes

# Don't use fsync() or fdatasync() calls. This makes the performance better
# at the cost of potential data loss if the server (or the file server)
# goes down.
#fsync_disable = no

# Mail storage exists in NFS. Set this to yes to make Dovecot flush NFS caches
# whenever needed. If you're using only a single mail server this isn't needed.
#mail_nfs_storage = no
# Mail index files also exist in NFS. Setting this to yes requires
# mmap_disable=yes and fsync_disable=no.
#mail_nfs_index = no

# Locking method for index files. Alternatives are fcntl, flock and dotlock.
# Dotlocking uses some tricks which may create more disk I/O than other locking
# methods. NFS users: flock doesn't work, remember to change mmap_disable.
#lock_method = fcntl

# Drop all privileges before exec()ing the mail process. This is mostly
# meant for debugging, otherwise you don't get core dumps. It could be a small
# security risk if you use single UID for multiple users, as the users could
# ptrace() each others processes then.
#mail_drop_priv_before_exec = no

# Show more verbose process titles (in ps). Currently shows user name and
# IP address. Useful for seeing who are actually using the IMAP processes
# (eg. shared mailboxes or if same uid is used for multiple accounts).
verbose_proctitle = yes

# Valid UID range for users, defaults to 500 and above. This is mostly
# to make sure that users can't log in as daemons or other system users.
# Note that denying root logins is hardcoded to dovecot binary and can't
# be done even if first_valid_uid is set to 0.
first_valid_uid = 90
#last_valid_uid = 0

# Valid GID range for users, defaults to non-root/wheel. Users having
# non-valid GID as primary group ID aren't allowed to log in. If user
# belongs to supplementary groups with non-valid GIDs, those groups are
# not set.
first_valid_gid = 90
#last_valid_gid = 0

# Maximum number of running mail processes. When this limit is reached,
# new users aren't allowed to log in.
#max_mail_processes = 512

# Set max. process size in megabytes. Most of the memory goes to mmap()ing
# files, so it shouldn't harm much even if this limit is set pretty high.
#mail_process_size = 256

# Maximum allowed length for mail keyword name. It's only forced when trying
# to create new keywords.
#mail_max_keyword_length = 50

# ':' separated list of directories under which chrooting is allowed for mail
# processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too).
# This setting doesn't affect login_chroot, mail_chroot or auth chroot
# settings. If this setting is empty, "/./" in home dirs are ignored.
# WARNING: Never add directories here which local users can modify, that
# may lead to root exploit. Usually this should be done only if you don't
# allow shell access for users. <doc/wiki/Chrooting.txt>
#valid_chroot_dirs = 

# Default chroot directory for mail processes. This can be overridden for
# specific users in user database by giving /./ in user's home directory
# (eg. /home/./user chroots into /home). Note that usually there is no real
# need to do chrooting, Dovecot doesn't allow users to access files outside
# their mail directory anyway. If your home directories are prefixed with
# the chroot directory, append "/." to mail_chroot. <doc/wiki/Chrooting.txt>
#mail_chroot = 

##
## Mailbox handling optimizations
##

# The minimum number of mails in a mailbox before updates are done to cache
# file. This allows optimizing Dovecot's behavior to do less disk writes at
# the cost of more disk reads.
#mail_cache_min_mail_count = 0

# When IDLE command is running, mailbox is checked once in a while to see if
# there are any new mails or other changes. This setting defines the minimum
# time in seconds to wait between those checks. Dovecot can also use dnotify,
# inotify and kqueue to find out immediately when changes occur.
#mailbox_idle_check_interval = 30

# Save mails with CR+LF instead of plain LF. This makes sending those mails
# take less CPU, especially with sendfile() syscall with Linux and FreeBSD.
# But it also creates a bit more disk I/O which may just make it slower.
# Also note that if other software reads the mboxes/maildirs, they may handle
# the extra CRs wrong and cause problems.
#mail_save_crlf = no

##
## Maildir-specific settings
##

# By default LIST command returns all entries in maildir beginning with a dot.
# Enabling this option makes Dovecot return only entries which are directories.
# This is done by stat()ing each entry, so it causes more disk I/O.
# (For systems setting struct dirent->d_type, this check is free and it's
# done always regardless of this setting)
#maildir_stat_dirs = no

# When copying a message, do it with hard links whenever possible. This makes
# the performance much better, and it's unlikely to have any side effects.
maildir_copy_with_hardlinks = yes

# When copying a message, try to preserve the base filename. Only if the
# destination mailbox already contains the same name (ie. the mail is being
# copied there twice), a new name is given. The destination filename check is
# done only by looking at dovecot-uidlist file, so if something outside
# Dovecot does similar filename preserving copies, you may run into problems.
# NOTE: This setting requires maildir_copy_with_hardlinks = yes to work.
#maildir_copy_preserve_filename = no

# Assume Dovecot is the only MUA accessing Maildir: Scan cur/ directory only
# when its mtime changes unexpectedly or when we can't find the mail otherwise.
#maildir_very_dirty_syncs = no

##
## mbox-specific settings
##

# Which locking methods to use for locking mbox. There are four available:
#  dotlock: Create <mailbox>.lock file. This is the oldest and most NFS-safe
#           solution. If you want to use /var/mail/ like directory, the users
#           will need write access to that directory.
#  dotlock_try: Same as dotlock, but if it fails because of permissions or
#               because there isn't enough disk space, just skip it.
#  fcntl  : Use this if possible. Works with NFS too if lockd is used.
#  flock  : May not exist in all systems. Doesn't work with NFS.
#  lockf  : May not exist in all systems. Doesn't work with NFS.
#
# You can use multiple locking methods; if you do the order they're declared
# in is important to avoid deadlocks if other MTAs/MUAs are using multiple
# locking methods as well. Some operating systems don't allow using some of
# them simultaneously.
#mbox_read_locks = fcntl
#mbox_write_locks = dotlock fcntl

# Maximum time in seconds to wait for lock (all of them) before aborting.
#mbox_lock_timeout = 300

# If dotlock exists but the mailbox isn't modified in any way, override the
# lock file after this many seconds.
#mbox_dotlock_change_timeout = 120

# When mbox changes unexpectedly we have to fully read it to find out what
# changed. If the mbox is large this can take a long time. Since the change
# is usually just a newly appended mail, it'd be faster to simply read the
# new mails. If this setting is enabled, Dovecot does this but still safely
# fallbacks to re-reading the whole mbox file whenever something in mbox isn't
# how it's expected to be. The only real downside to this setting is that if
# some other MUA changes message flags, Dovecot doesn't notice it immediately.
# Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK 
# commands.
#mbox_dirty_syncs = yes

# Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE,
# EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored.
#mbox_very_dirty_syncs = no

# Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK
# commands and when closing the mailbox). This is especially useful for POP3
# where clients often delete all mails. The downside is that our changes
# aren't immediately visible to other MUAs.
#mbox_lazy_writes = yes

# If mbox size is smaller than this (in kilobytes), don't write index files.
# If an index file already exists it's still read, just not updated.
#mbox_min_index_size = 0

##
## dbox-specific settings
##

# Maximum dbox file size in kilobytes until it's rotated.
#dbox_rotate_size = 2048

# Minimum dbox file size in kilobytes before it's rotated
# (overrides dbox_rotate_days)
#dbox_rotate_min_size = 16

# Maximum dbox file age in days until it's rotated. Day always begins from
# midnight, so 1 = today, 2 = yesterday, etc. 0 = check disabled.
#dbox_rotate_days = 0

##
## IMAP specific settings
##

protocol imap {
  # Login executable location.
  #login_executable = /usr/local/libexec/dovecot/imap-login

  # IMAP executable location. Changing this allows you to execute other
  # binaries before the imap process is executed.
  #
  # This would write rawlogs into user's ~/dovecot.rawlog/, if it exists:
  #   mail_executable = /usr/local/libexec/dovecot/rawlog /usr/local/libexec/dovecot/imap
  # <doc/wiki/Debugging/Rawlog.txt>
  #
  # This would attach gdb into the imap process and write backtraces into
  # /tmp/gdbhelper.* files:
  #   mail_executable = /usr/local/libexec/dovecot/gdbhelper /usr/local/libexec/dovecot/imap
  #
  mail_executable = /usr/local/libexec/dovecot/imap

  # Maximum IMAP command line length in bytes. Some clients generate very long
  # command lines with huge mailboxes, so you may need to raise this if you get
  # "Too long argument" or "IMAP command line too large" errors often.
  #imap_max_line_length = 65536

  # Maximum number of IMAP connections allowed for a user from each IP address.
  # NOTE: The username is compared case-sensitively.
  #mail_max_userip_connections = 10

  # Support for dynamically loadable plugins. mail_plugins is a space separated
  # list of plugins to load.
  #mail_plugins = 
  #mail_plugin_dir = /usr/local/lib/dovecot/imap

  # IMAP logout format string:
  #  %i - total number of bytes read from client
  #  %o - total number of bytes sent to client
  #imap_logout_format = bytes=%i/%o

  # Override the IMAP CAPABILITY response.
  #imap_capability = 

  # How many seconds to wait between "OK Still here" notifications when
  # client is IDLEing.
  #imap_idle_notify_interval = 120

  # ID field names and values to send to clients. Using * as the value makes
  # Dovecot use the default value. The following fields have default values
  # currently: name, version, os, os-version, support-url, support-email.
  #imap_id_send = 

  # ID fields sent by client to log. * means everything.
  #imap_id_log =

  # Workarounds for various client bugs:
  #   delay-newmail:
  #     Send EXISTS/RECENT new mail notifications only when replying to NOOP
  #     and CHECK commands. Some clients ignore them otherwise, for example OSX
  #     Mail (<v2.1). Outlook Express breaks more badly though, without this it
  #     may show user "Message no longer in server" errors. Note that OE6 still
  #     breaks even with this workaround if synchronization is set to
  #     "Headers Only".
  #   netscape-eoh:
  #     Netscape 4.x breaks if message headers don't end with the empty "end of
  #     headers" line. Normally all messages have this, but setting this
  #     workaround makes sure that Netscape never breaks by adding the line if
  #     it doesn't exist. This is done only for FETCH BODY[HEADER.FIELDS..]
  #     commands. Note that RFC says this shouldn't be done.
  #   tb-extra-mailbox-sep:
  #     With mbox storage a mailbox can contain either mails or submailboxes,
  #     but not both. Thunderbird separates these two by forcing server to
  #     accept '/' suffix in mailbox names in subscriptions list.
  # The list is space-separated.
  imap_client_workarounds = delay-newmail netscape-eoh tb-extra-mailbox-sep
}
  
##
## POP3 specific settings
##

protocol pop3 {
  # Login executable location.
  #login_executable = /usr/local/libexec/dovecot/pop3-login

  # POP3 executable location. See IMAP's mail_executable above for examples
  # how this could be changed.
  mail_executable = /usr/local/libexec/dovecot/pop3

  # Don't try to set mails non-recent or seen with POP3 sessions. This is
  # mostly intended to reduce disk I/O. With maildir it doesn't move files
  # from new/ to cur/, with mbox it doesn't write Status-header.
  #pop3_no_flag_updates = no

  # Support LAST command which exists in old POP3 specs, but has been removed
  # from new ones. Some clients still wish to use this though. Enabling this
  # makes RSET command clear all \Seen flags from messages.
  #pop3_enable_last = no

  # If mail has X-UIDL header, use it as the mail's UIDL.
  #pop3_reuse_xuidl = no

  # Keep the mailbox locked for the entire POP3 session.
  #pop3_lock_session = no

  # POP3 UIDL (unique mail identifier) format to use. You can use following
  # variables, along with the variable modifiers described in
  # <doc/wiki/Variables.txt> (e.g. %Uf for the filename in uppercase)
  #
  #  %v - Mailbox's IMAP UIDVALIDITY
  #  %u - Mail's IMAP UID
  #  %m - MD5 sum of the mailbox headers in hex (mbox only)
  #  %f - filename (maildir only)
  #
  # If you want UIDL compatibility with other POP3 servers, use:
  #  UW's ipop3d         : %08Xv%08Xu
  #  Courier             : %f or %v-%u (both might be used simultaneosly)
  #  Cyrus (<= 2.1.3)    : %u
  #  Cyrus (>= 2.1.4)    : %v.%u
  #  Dovecot v0.99.x     : %v.%u
  #  tpop3d              : %Mf
  #
  # Note that Outlook 2003 seems to have problems with %v.%u format which was
  # Dovecot's default, so if you're building a new server it would be a good
  # idea to change this. %08Xu%08Xv should be pretty fail-safe.
  #
  pop3_uidl_format = %08Xu%08Xv

  # POP3 logout format string:
  #  %i - total number of bytes read from client
  #  %o - total number of bytes sent to client
  #  %t - number of TOP commands
  #  %p - number of bytes sent to client as a result of TOP command
  #  %r - number of RETR commands
  #  %b - number of bytes sent to client as a result of RETR command
  #  %d - number of deleted messages
  #  %m - number of messages (before deletion)
  #  %s - mailbox size in bytes (before deletion)
  #pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s

  # Maximum number of POP3 connections allowed for a user from each IP address.
  # NOTE: The username is compared case-sensitively.
  #mail_max_userip_connections = 3

  # Support for dynamically loadable plugins. mail_plugins is a space separated
  # list of plugins to load.
  #mail_plugins = 
  #mail_plugin_dir = /usr/local/lib/dovecot/pop3

  # Workarounds for various client bugs:
  #   outlook-no-nuls:
  #     Outlook and Outlook Express hang if mails contain NUL characters.
  #     This setting replaces them with 0x80 character.
  #   oe-ns-eoh:
  #     Outlook Express and Netscape Mail breaks if end of headers-line is
  #     missing. This option simply sends it if it's missing.
  # The list is space-separated.
  pop3_client_workarounds = outlook-no-nuls oe-ns-eoh
}

##
## LDA specific settings
##

protocol lda {
  # Address to use when sending rejection mails.
  postmaster_address = postmaster@example.com

  # Hostname to use in various parts of sent mails, eg. in Message-Id.
  # Default is the system's real hostname.
  #hostname = 

  # Support for dynamically loadable plugins. mail_plugins is a space separated
  # list of plugins to load.
  #mail_plugins = 
  #mail_plugin_dir = /usr/local/lib/dovecot/lda

  # If user is over quota, return with temporary failure instead of
  # bouncing the mail.
  #quota_full_tempfail = no

  # Format to use for logging mail deliveries. You can use variables:
  #  %$ - Delivery status message (e.g. "saved to INBOX")
  #  %m - Message-ID
  #  %s - Subject
  #  %f - From address
  #deliver_log_format = msgid=%m: %$

  # Binary to use for sending mails.
  sendmail_path = /usr/sbin/sendmail

  # Subject: header to use for rejection mails. You can use the same variables
  # as for rejection_reason below.
  #rejection_subject = Rejected: %s

  # Human readable error message for rejection mails. You can use variables:
  #  %n = CRLF, %r = reason, %s = original subject, %t = recipient
  #rejection_reason = Your message to <%t> was automatically rejected:%n%r

  # UNIX socket path to master authentication server to find users.
  #auth_socket_path = /var/run/dovecot/auth-master
}

##
## Authentication processes
##

# Executable location
#auth_executable = /usr/local/libexec/dovecot/dovecot-auth

# Set max. process size in megabytes.
#auth_process_size = 256

# Authentication cache size in kilobytes. 0 means it's disabled.
# Note that bsdauth, PAM and vpopmail require cache_key to be set for caching
# to be used.
#auth_cache_size = 0
# Time to live in seconds for cached data. After this many seconds the cached
# record is no longer used, *except* if the main database lookup returns
# internal failure. We also try to handle password changes automatically: If
# user's previous authentication was successful, but this one wasn't, the
# cache isn't used. For now this works only with plaintext authentication.
#auth_cache_ttl = 3600
# TTL for negative hits (user not found, password mismatch).
# 0 disables caching them completely.
#auth_cache_negative_ttl = 3600

# Space separated list of realms for SASL authentication mechanisms that need
# them. You can leave it empty if you don't want to support multiple realms.
# Many clients simply use the first one listed here, so keep the default realm
# first.
#auth_realms =

# Default realm/domain to use if none was specified. This is used for both
# SASL realms and appending @domain to username in plaintext logins.
#auth_default_realm = 

# List of allowed characters in username. If the user-given username contains
# a character not listed in here, the login automatically fails. This is just
# an extra check to make sure user can't exploit any potential quote escaping
# vulnerabilities with SQL/LDAP databases. If you want to allow all characters,
# set this value to empty.
#auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@

# Username character translations before it's looked up from databases. The
# value contains series of from -> to characters. For example "#@/@" means
# that '#' and '/' characters are translated to '@'.
#auth_username_translation =

# Username formatting before it's looked up from databases. You can use
# the standard variables here, eg. %Lu would lowercase the username, %n would
# drop away the domain if it was given, or "%n-AT-%d" would change the '@' into
# "-AT-". This translation is done after auth_username_translation changes.
auth_username_format = %Lu

# If you want to allow master users to log in by specifying the master
# username within the normal username string (ie. not using SASL mechanism's
# support for it), you can specify the separator character here. The format
# is then <username><separator><master username>. UW-IMAP uses "*" as the
# separator, so that could be a good choice.
#auth_master_user_separator =

# Username to use for users logging in with ANONYMOUS SASL mechanism
#auth_anonymous_username = anonymous

# Log unsuccessful authentication attempts and the reasons why they failed.
auth_verbose = yes

# Even more verbose logging for debugging purposes. Shows for example SQL
# queries.
auth_debug = yes

# In case of password mismatches, log the passwords and used scheme so the
# problem can be debugged. Enabling this also enables auth_debug.
#auth_debug_passwords = no

# Maximum number of dovecot-auth worker processes. They're used to execute
# blocking passdb and userdb queries (eg. MySQL and PAM). They're
# automatically created and destroyed as needed.
#auth_worker_max_count = 30

# Host name to use in GSSAPI principal names. The default is to use the
# name returned by gethostname(). Use "$ALL" to allow all keytab entries.
#auth_gssapi_hostname =

# Kerberos keytab to use for the GSSAPI mechanism. Will use the system 
# default (usually /etc/krb5.keytab) if not specified.
#auth_krb5_keytab = 

# Do NTLM and GSS-SPNEGO authentication using Samba's winbind daemon and
# ntlm_auth helper. <doc/wiki/Authentication/Mechanisms/Winbind.txt>
#auth_use_winbind = no

# Path for Samba's ntlm_auth helper binary.
#auth_winbind_helper_path = /usr/local/bin/ntlm_auth

# Number of seconds to delay before replying to failed authentications.
#auth_failure_delay = 2

auth default {
  # Space separated list of wanted authentication mechanisms:
  #   plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey
  #   gss-spnego
  # NOTE: See also disable_plaintext_auth setting.
  mechanisms = plain login

  #
  # Password database is used to verify user's password (and nothing more).
  # You can have multiple passdbs and userdbs. This is useful if you want to
  # allow both system users (/etc/passwd) and virtual users to login without
  # duplicating the system users into virtual database.
  #
  # <doc/wiki/PasswordDatabase.txt>
  #
  # By adding master=yes setting inside a passdb you make the passdb a list
  # of "master users", who can log in as anyone else. Unless you're using PAM,
  # you probably still want the destination user to be looked up from passdb
  # that it really exists. This can be done by adding pass=yes setting to the
  # master passdb. <doc/wiki/Authentication.MasterUsers.txt>

  # Users can be temporarily disabled by adding a passdb with deny=yes.
  # If the user is found from that database, authentication will fail.
  # The deny passdb should always be specified before others, so it gets
  # checked first. Here's an example:

  #passdb passwd-file {
    # File contains a list of usernames, one per line
    #args = /usr/local/etc/dovecot.deny
    #deny = yes
  #}

  # PAM authentication. Preferred nowadays by most systems. 
  # Note that PAM can only be used to verify if user's password is correct,
  # so it can't be used as userdb. If you don't want to use a separate user
  # database (passwd usually), you can use static userdb.
  # REMEMBER: You'll need /etc/pam.d/dovecot file created for PAM
  # authentication to actually work. <doc/wiki/PasswordDatabase.PAM.txt>
  passdb pam {
    # [session=yes] [setcred=yes] [failure_show_msg=yes] [max_requests=<n>]
    # [cache_key=<key>] [<service name>]
    #
    # session=yes makes Dovecot open and immediately close PAM session. Some
    # PAM plugins need this to work, such as pam_mkhomedir.
    #
    # setcred=yes makes Dovecot establish PAM credentials if some PAM plugins
    # need that. They aren't ever deleted though, so this isn't enabled by
    # default.
    #
    # max_requests specifies how many PAM lookups to do in one process before
    # recreating the process. The default is 100, because many PAM plugins
    # leak memory.
    #
    # cache_key can be used to enable authentication caching for PAM
    # (auth_cache_size also needs to be set). It isn't enabled by default
    # because PAM modules can do all kinds of checks besides checking password,
    # such as checking IP address. Dovecot can't know about these checks
    # without some help. cache_key is simply a list of variables (see
    # doc/wiki/Variables.txt) which must match for the cached data to be used.
    # Here are some examples:
    #   %u - Username must match. Probably sufficient for most uses.
    #   %u%r - Username and remote IP address must match.
    #   %u%s - Username and service (ie. IMAP, POP3) must match.
    # 
    # The service name can contain variables, for example %Ls expands to
    # pop3 or imap.
    #
    # Some examples:
    #   args = session=yes %Ls
    #   args = cache_key=%u dovecot
    #args = dovecot
    args = session=yes dovecot
  }

  # System users (NSS, /etc/passwd, or similiar)
  # In many systems nowadays this uses Name Service Switch, which is
  # configured in /etc/nsswitch.conf. <doc/wiki/AuthDatabase.Passwd.txt>
  #passdb passwd {
    # [blocking=yes] - See userdb passwd for explanation
    #args = 
  #}

  # Shadow passwords for system users (NSS, /etc/shadow or similiar).
  # Deprecated by PAM nowadays.
  # <doc/wiki/PasswordDatabase.Shadow.txt>
  #passdb shadow {
    # [blocking=yes] - See userdb passwd for explanation
    #args = 
  #}

  # PAM-like authentication for OpenBSD.
  # <doc/wiki/PasswordDatabase.BSDAuth.txt>
  #passdb bsdauth {
    # [cache_key=<key>] - See cache_key in PAM for explanation.
    #args =
  #}

  # passwd-like file with specified location
  # <doc/wiki/AuthDatabase.PasswdFile.txt>
  #passdb passwd-file {
    # [scheme=<default password scheme>] [username_format=<format>]
    # <Path for passwd-file>
    #args = 
  #}

  # checkpassword executable authentication
  # NOTE: You will probably want to use "userdb prefetch" with this.
  # <doc/wiki/AuthDatabase.CheckPassword.txt>
  #passdb checkpassword {
    # Path for checkpassword binary
    #args = 
  #}

  # SQL database <doc/wiki/AuthDatabase.SQL.txt>
  passdb sql {
    # Path for SQL configuration file.
    # See /usr/local/share/examples/dovecot/dovecot-sql.conf
    args = /usr/local/etc/dovecot-sql.conf
  }

  # LDAP database <doc/wiki/AuthDatabase.LDAP.txt>
  #passdb ldap {
    # Path for LDAP configuration file.
    # See /usr/local/share/examples/dovecot/dovecot-ldap.conf
    #args = /usr/local/etc/dovecot-ldap.conf
  #}

  # vpopmail authentication <doc/wiki/AuthDatabase.VPopMail.txt>
  #passdb vpopmail {
    # [cache_key=<key>] - See cache_key in PAM for explanation.
    # [quota_template=<template>] - %q expands to Maildir++ quota
    #   (eg. quota_template=quota_rule=*:backend=%q)
    #args =
  #}

  #
  # User database specifies where mails are located and what user/group IDs
  # own them. For single-UID configuration use "static".
  #
  # <doc/wiki/UserDatabase.txt>
  #

  # "prefetch" user database means that the passdb already provided the
  # needed information and there's no need to do a separate userdb lookup.
  # This can be made to work with SQL and LDAP databases, see their example
  # configuration files for more information how to do it.
  # <doc/wiki/UserDatabase.Prefetch.txt>
  #userdb prefetch {
  #}

  # System users (NSS, /etc/passwd, or similiar). In many systems nowadays this
  # uses Name Service Switch, which is configured in /etc/nsswitch.conf.
  # <doc/wiki/AuthDatabase.Passwd.txt>
  userdb passwd {
    # [blocking=yes] - By default the lookups are done in the main dovecot-auth
    # process. This setting causes the lookups to be done in auth worker
    # proceses. Useful with remote NSS lookups that may block.
    # NOTE: Be sure to use this setting with nss_ldap or users might get
    # logged in as each others!
    args = blocking=yes
  }

  # passwd-like file with specified location
  # <doc/wiki/AuthDatabase.PasswdFile.txt>
  #userdb passwd-file {
    # [username_format=<format>] <Path for passwd-file>
    #args =
  #}

  # checkpassword executable user database lookup
  # <doc/wiki/AuthDatabase.CheckPassword.txt>
  #userdb checkpassword {
    # Path for checkpassword binary
    #args = 
  #}

  # static settings generated from template <doc/wiki/UserDatabase.Static.txt>
  #userdb static {
    # Template for the fields. Can return anything a userdb could normally
    # return. For example:
    #
    #  args = uid=500 gid=500 home=/var/mail/%u
    #
    # If you use deliver, it needs to look up users only from the userdb. This
    # of course doesn't work with static because there is no list of users.
    # Normally static userdb handles this by doing a passdb lookup. This works
    # with most passdbs, with PAM being the most notable exception. If you do
    # the user verification another way, you can add allow_all_users=yes to
    # the args in which case the passdb lookup is skipped.
    #
    #args =
  #}

  # SQL database <doc/wiki/AuthDatabase.SQL.txt>
  userdb sql {
    # Path for SQL configuration file.
    # See /usr/local/share/examples/dovecot/dovecot-sql.conf
    args = /usr/local/etc/dovecot-sql.conf
  }

  # LDAP database <doc/wiki/AuthDatabase.LDAP.txt>
  #userdb ldap {
    # Path for LDAP configuration file.
    # See /usr/local/share/examples/dovecot/dovecot-ldap.conf
    #args = /usr/local/etc/dovecot-ldap.conf
  #}

  # vpopmail <doc/wiki/AuthDatabase.VPopMail.txt>
  #userdb vpopmail {
  #}

  # User to use for the process. This user needs access to only user and
  # password databases, nothing else. Only shadow and pam authentication
  # requires roots, so use something else if possible. Note that passwd
  # authentication with BSDs internally accesses shadow files, which also
  # requires roots. Note that this user is NOT used to access mails.
  # That user is specified by userdb above.
  user = root

  # Directory where to chroot the process. Most authentication backends don't
  # work if this is set, and there's no point chrooting if auth_user is root.
  # Note that valid_chroot_dirs isn't needed to use this setting.
  #chroot = 

  # Number of authentication processes to create
  #count = 1

  # Require a valid SSL client certificate or the authentication fails.
  #ssl_require_client_cert = no

  # Take the username from client's SSL certificate, using 
  # X509_NAME_get_text_by_NID() which returns the subject's DN's
  # CommonName. 
  #ssl_username_from_cert = no

  # It's possible to export the authentication interface to other programs:
  socket listen {
    master {
      # Master socket provides access to userdb information. It's typically
      # used to give Dovecot's local delivery agent access to userdb so it
      # can find mailbox locations.
      path = /var/run/dovecot/auth-master
      mode = 0600
      # Default user/group is the one who started dovecot-auth (root)
      #user = 
      #group = 
    }
    client {
      # The client socket is generally safe to export to everyone. Typical use
      # is to export it to your SMTP server so it can do SMTP AUTH lookups
      # using it.
      path = /var/run/dovecot/auth-client
      mode = 0660
    }
  }
}

# If you wish to use another authentication server than dovecot-auth, you can
# use connect sockets. They are assumed to be already running, Dovecot's master
# process only tries to connect to them. They don't need any other settings
# than the path for the master socket, as the configuration is done elsewhere.
# Note that the client sockets must exist in the login_dir.
#auth external {
#  socket connect {
#    master {
#      path = /var/run/dovecot/auth-master
#    }
#  }
#}

##
## Dictionary server settings
##

# Dictionary can be used by some plugins to store key=value lists.
# Currently this is only used by dict quota backend. The dictionary can be
# used either directly or though a dictionary server. The following dict block
# maps dictionary names to URIs when the server is used. These can then be
# referenced using URIs in format "proxy::<name>".

dict {
  #quota = mysql:/usr/local/etc/dovecot-dict-quota.conf 
  #expire = db:/var/db/dovecot/expire.db
}

# Path to Berkeley DB's configuration file.
# See /usr/local/share/examples/dovecot/dovecot-db.conf
#dict_db_config = /usr/local/etc/dovecot-db.conf

##
## Plugin settings
##

plugin {
  # Here you can give some extra environment variables to mail processes.
  # This is mostly meant for passing parameters to plugins. %variable
  # expansion is done for all values.

  # Quota plugin. Multiple backends are supported:
  #   dirsize: Find and sum all the files found from mail directory.
  #            Extremely SLOW with Maildir. It'll eat your CPU and disk I/O.
  #   dict: Keep quota stored in dictionary (eg. SQL)
  #   maildir: Maildir++ quota
  #   fs: Read-only support for filesystem quota
  #
  # Quota limits are set using "quota_rule" parameters, either in here or in
  # userdb. It's also possible to give mailbox-specific limits, for example:
  #   quota_rule = *:storage=1048576
  #   quota_rule2 = Trash:storage=102400
  # User has now 1GB quota, but when saving to Trash mailbox the user gets
  # additional 100MB.
  #
  # Multiple quota roots are also possible, for example:
  #   quota = dict:user::proxy::quota
  #   quota2 = dict:domain:%d:proxy::quota_domain
  #   quota_rule = *:storage=102400
  #   quota2_rule = *:storage=1048576
  # Gives each user their own 100MB quota and one shared 1GB quota within
  # the domain.
  #
  # You can execute a given command when user exceeds a specified quota limit.
  # Each quota root has separate limits. Only the command for the first
  # exceeded limit is excecuted, so put the highest limit first.
  # Note that % needs to be escaped as %%, otherwise "% " expands to empty.
  #   quota_warning = storage=95%% /usr/local/bin/quota-warning.sh 95
  #   quota_warning2 = storage=80%% /usr/local/bin/quota-warning.sh 80
  #quota = maildir

  # ACL plugin. vfile backend reads ACLs from "dovecot-acl" file from maildir
  # directory. You can also optionally give a global ACL directory path where
  # ACLs are applied to all users' mailboxes. The global ACL directory contains
  # one file for each mailbox, eg. INBOX or sub.mailbox. cache_secs parameter
  # specifies how many seconds to wait between stat()ing dovecot-acl file
  # to see if it changed.
  #acl = vfile:/usr/local/etc/dovecot-acls:cache_secs=300

  # To let users LIST mailboxes shared by other users, Dovecot needs a
  # shared mailbox dictionary. For example:
  #acl_shared_dict = file:/var/lib/dovecot/shared-mailboxes

  # Convert plugin. If set, specifies the source storage path which is
  # converted to destination storage (mail_location) when the user logs in.
  # The existing mail directory is renamed to <dir>-converted.
  #convert_mail = mbox:%h/mail
  # Skip mailboxes which we can't open successfully instead of aborting.
  #convert_skip_broken_mailboxes = no
  # Skip directories beginning with '.'
  #convert_skip_dotdirs = no
  # If source storage has mailbox names with destination storage's hierarchy
  # separators, replace them with this character.
  #convert_alt_hierarchy_char = _

  # Trash plugin. When saving a message would make user go over quota, this
  # plugin automatically deletes the oldest mails from configured mailboxes
  # until the message can be saved within quota limits. The configuration file
  # is a text file where each line is in format: <priority> <mailbox name>
  # Mails are first deleted in lowest -> highest priority number order
  #trash = /usr/local/etc/dovecot-trash.conf

  # Expire plugin. Mails are expunged from mailboxes after being there the
  # configurable time. The first expiration date for each mailbox is stored in
  # a dictionary so it can be quickly determined which mailboxes contain
  # expired mails. The actual expunging is done in a nightly cronjob, which
  # you must set up:
  #   dovecot --exec-mail ext /usr/local/libexec/dovecot/expire-tool
  #expire = Trash 7 Spam 30
  #expire_dict = proxy::expire

  # Lazy expunge plugin. Currently works only with maildirs. When a user
  # expunges mails, the mails are moved to a mailbox in another namespace
  # (1st). When a mailbox is deleted, the mailbox is moved to another namespace
  # (2nd) as well. Also if the deleted mailbox had any expunged messages,
  # they're moved to a 3rd namespace. The mails won't be counted in quota,
  # and they're not deleted automatically (use a cronjob or something).
  #lazy_expunge = .EXPUNGED/ .DELETED/ .DELETED/.EXPUNGED/

  # Events to log. Also available: flag_change append
  #mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename
  # Group events within a transaction to one line.
  #mail_log_group_events = no
  # Available fields: uid, box, msgid, from, subject, size, vsize, flags
  # size and vsize are available only for expunge and copy events.
  #mail_log_fields = uid box msgid size
}

# Config files can also be included:
#!include /usr/local/etc/dovecot/conf.d/*.conf
# Optional configurations, don't give an error if it's not found:
#!include_try /usr/local/etc/dovecot/extra.conf

Код: Выделить всё

######################################################################
#                  Runtime configuration file for Exim               #
######################################################################


# This is a default configuration file which will operate correctly in
# uncomplicated installations. Please see the manual for a complete list
# of all the runtime configuration options that can be included in a
# configuration file. There are many more than are mentioned here. The
# manual is in the file doc/spec.txt in the Exim distribution as a plain
# ASCII file. Other formats (PostScript, Texinfo, HTML, PDF) are available
# from the Exim ftp sites. The manual is also online at the Exim web sites.


# This file is divided into several parts, all but the first of which are
# headed by a line starting with the word "begin". Only those parts that
# are required need to be present. Blank lines, and lines starting with #
# are ignored.


########### IMPORTANT ########## IMPORTANT ########### IMPORTANT ###########
#                                                                          #
# Whenever you change Exim's configuration file, you *must* remember to    #
# HUP the Exim daemon, because it will not pick up the new configuration   #
# until you do. However, any other Exim processes that are started, for    #
# example, a process started by an MUA in order to send a message, will    #
# see the new configuration as soon as it is in place.                     #
#                                                                          #
# You do not need to HUP the daemon for changes in auxiliary files that    #
# are referenced from this file. They are read every time they are used.   #
#                                                                          #
# It is usually a good idea to test a new configuration for syntactic      #
# correctness before installing it (for example, by running the command    #
# "exim -C /config/file.new -bV").                                         #
#                                                                          #
########### IMPORTANT ########## IMPORTANT ########### IMPORTANT ###########



######################################################################
#                    MAIN CONFIGURATION SETTINGS                     #
######################################################################

MAILMAN_HOME=/usr/local/mailman
MAILMAN_WRAP=MAILMAN_HOME/mail/mailman
MAILMAN_USER=mailnull
MAILMAN_GROUP=mail

# Specify your host's canonical name here. This should normally be the fully
# qualified "official" name of your host. If this option is not set, the
# uname() function is called to obtain the name. In many cases this does
# the right thing and you need not set anything explicitly.

primary_hostname = mx.domain.ru

# Your IP address
MY_IP = 10.0.0.10

# The next three settings create two lists of domains and one list of hosts.
# These lists are referred to later in this configuration using the syntax
# +local_domains, +relay_to_domains, and +relay_from_hosts, respectively. They
# are all colon-separated lists:

# If you are using MySQL, uncomment the following two lines:
VIRTUAL_DOMAINS = SELECT DISTINCT domain FROM domains WHERE type = 'local' AND enabled = '1' AND domain = '${quote_mysql:$domain}'
RELAY_DOMAINS = SELECT DISTINCT domain FROM domains WHERE type = 'relay'  AND domain = '${quote_mysql:$domain}'
ALIAS_DOMAINS = SELECT DISTINCT alias FROM domainalias WHERE alias = '${quote_mysql:$domain}'

# If you are using PGSQL, uncomment the following four lines:
#VIRTUAL_DOMAINS = SELECT DISTINCT domain || ' : ' FROM domains WHERE type = 'local'
#RELAY_DOMAINS = SELECT DISTINCT domain || ' : ' FROM domains WHERE type = 'relay'

domainlist local_domains = @ : pear.silverwraith.com : ${lookup mysql{VIRTUAL_DOMAINS}} : ${lookup mysql{ALIAS_DOMAINS}}
domainlist relay_to_domains = ${lookup mysql{RELAY_DOMAINS}}
hostlist   relay_from_hosts = localhost : 192.168.0.0/24 : MY_IP
trusted_users = www

hide mysql_servers = localhost::(/tmp/mysql.sock)/exim/eximuser/eximpass
#hide pgsql_servers = localhost/vexim/vexim/CHANGE

# Most straightforward access control requirements can be obtained by
# appropriate settings of the above options. In more complicated situations, you
# may need to modify the Access Control List (ACL) which appears later in this
# file.

# The first setting specifies your local domains, for example:
#
#   domainlist local_domains = my.first.domain : my.second.domain
#
# You can use "@" to mean "the name of the local host", as in the default
# setting above. This is the name that is specified by primary_hostname,
# as specified above (or defaulted). If you do not want to do any local
# deliveries, remove the "@" from the setting above. If you want to accept mail
# addressed to your host's literal IP address, for example, mail addressed to
# "user@[192.168.23.44]", you can add "@[]" as an item in the local domains
# list. You also need to uncomment "allow_domain_literals" below. This is not
# recommended for today's Internet.

# The second setting specifies domains for which your host is an incoming relay.
# If you are not doing any relaying, you should leave the list empty. However,
# if your host is an MX backup or gateway of some kind for some domains, you
# must set relay_to_domains to match those domains. For example:
#
# domainlist relay_to_domains = *.myco.com : my.friend.org
#
# This will allow any host to relay through your host to those domains.
# See the section of the manual entitled "Control of relaying" for more
# information.

# The third setting specifies hosts that can use your host as an outgoing relay
# to any other host on the Internet. Such a setting commonly refers to a
# complete local network as well as the localhost. For example:
#
# hostlist relay_from_hosts = 127.0.0.1 : 192.168.0.0/16
#
# The "/16" is a bit mask (CIDR notation), not a number of hosts. Note that you
# have to include 127.0.0.1 if you want to allow processes on your host to send
# SMTP mail by using the loopback address. A number of MUAs use this method of
# sending mail.


# All three of these lists may contain many different kinds of item, including
# wildcarded names, regular expressions, and file lookups. See the reference
# manual for details. The lists above are used in the access control list for
# incoming messages. The name of this ACL is defined here:

acl_smtp_rcpt = acl_check_rcpt

# You should not change that setting until you understand how ACLs work.

# The following ACL entry is used if you want to do content scanning with the
# exiscan-acl patch. When you uncomment this line, you must also review the
# acl_check_content entry in the ACL section further below.

acl_smtp_data = acl_check_content

# This ACL added by Avleen Vig will drop all mail where the sender's helo
# command contains your IP address. Please check the IP address at the top
# for the configure file to make it your own.

acl_smtp_helo = acl_check_helo

# This configuration variable defines the virus scanner that is used with
# the 'malware' ACL condition of the exiscan acl-patch. If you do not use
# virus scanning, leave it commented. Please read doc/exiscan-acl-readme.txt
# for a list of supported scanners.

av_scanner = clamd:/var/run/clamav/clamd.sock

# The following setting is only needed if you use the 'spam' ACL condition
# of the exiscan-acl patch. It specifies on which host and port the SpamAssassin
# "spamd" daemon is listening. If you do not use this condition, or you use
# the default of "127.0.0.1 783", you can omit this option.

spamd_address = 127.0.0.1 783

# Specify the domain you want to be added to all unqualified addresses
# here. An unqualified address is one that does not contain an "@" character
# followed by a domain. For example, "caesar@rome.example" is a fully qualified
# address, but the string "caesar" (i.e. just a login name) is an unqualified
# email address. Unqualified addresses are accepted only from local callers by
# default. See the recipient_unqualified_hosts option if you want to permit
# unqualified addresses from remote sources. If this option is not set, the
# primary_hostname value is used for qualification.

# qualify_domain =


# If you want unqualified recipient addresses to be qualified with a different
# domain to unqualified sender addresses, specify the recipient domain here.
# If this option is not set, the qualify_domain value is used.

# qualify_recipient =


# The following line must be uncommented if you want Exim to recognize
# addresses of the form "user@[10.11.12.13]" that is, with a "domain literal"
# (an IP address) instead of a named domain. The RFCs still require this form,
# but it makes little sense to permit mail to be sent to specific hosts by
# their IP address in the modern Internet. This ancient format has been used
# by those seeking to abuse hosts by using them for unwanted relaying. If you
# really do want to support domain literals, uncomment the following line, and
# see also the "domain_literal" router below.

# allow_domain_literals


# No deliveries will ever be run under the uids of these users (a colon-
# separated list). An attempt to do so causes a panic error to be logged, and
# the delivery to be deferred. This is a paranoic safety catch. Note that the
# default setting means you cannot deliver mail addressed to root as if it
# were a normal user. This isn't usually a problem, as most sites have an alias
# for root that redirects such mail to a human administrator.

exim_user = mailnull
exim_group = mail
never_users = root


# The setting below causes Exim to do a reverse DNS lookup on all incoming
# IP calls, in order to get the true host name. If you feel this is too
# expensive, you can specify the networks for which a lookup is done, or
# remove the setting entirely.

host_lookup = *


# The settings below, which are actually the same as the defaults in the
# code, cause Exim to make RFC 1413 (ident) callbacks for all incoming SMTP
# calls. You can limit the hosts to which these calls are made, and/or change
# the timeout that is used. If you set the timeout to zero, all RFC 1413 calls
# are disabled. RFC 1413 calls are cheap and can provide useful information
# for tracing problem messages, but some hosts and firewalls have problems
# with them. This can result in a timeout instead of an immediate refused
# connection, leading to delays on starting up an SMTP session.

rfc1413_hosts = *
rfc1413_query_timeout = 0s


# By default, Exim expects all envelope addresses to be fully qualified, that
# is, they must contain both a local part and a domain. If you want to accept
# unqualified addresses (just a local part) from certain hosts, you can specify
# these hosts by setting one or both of
#
# sender_unqualified_hosts =
# recipient_unqualified_hosts =
#
# to control sender and recipient addresses, respectively. When this is done,
# unqualified addresses are qualified using the settings of qualify_domain
# and/or qualify_recipient (see above).


# If you want Exim to support the "percent hack" for certain domains,
# uncomment the following line and provide a list of domains. The "percent
# hack" is the feature by which mail addressed to x%y@z (where z is one of
# the domains listed) is locally rerouted to x@y and sent on. If z is not one
# of the "percent hack" domains, x%y is treated as an ordinary local part. This
# hack is rarely needed nowadays; you should not enable it unless you are sure
# that you really need it.
#
# percent_hack_domains =
#
# As well as setting this option you will also need to remove the test
# for local parts containing % in the ACL definition below.


# When Exim can neither deliver a message nor return it to sender, it "freezes"
# the delivery error message (aka "bounce message"). There are also other
# circumstances in which messages get frozen. They will stay on the queue for
# ever unless one of the following options is set.

# This option unfreezes frozen bounce messages after two days, tries
# once more to deliver them, and ignores any delivery failures.

ignore_bounce_errors_after = 2d

# This option cancels (removes) frozen messages that are older than a week.

timeout_frozen_after = 7d


# We also want a little more detail in our logs, helps with debugging

log_selector = +subject


######################################################################
#                       ACL CONFIGURATION                            #
#         Specifies access control lists for incoming SMTP mail      #
######################################################################

begin acl
  .include /usr/local/etc/exim/vexim-acl-check-spf.conf

acl_check_helo:

# Include Vexim specific helo ACLs
  .include /usr/local/etc/exim/vexim-acl-check-helo.conf

# This access control list is used for every RCPT command in an incoming
# SMTP message. The tests are run in order until the address is either
# accepted or denied.

acl_check_rcpt:

  # Accept if the source is local SMTP (i.e. not over TCP/IP). We do this by
  # testing for an empty sending host field.

  accept  hosts = :

  # Include Vexim specific rcpt ACLs
  .include /usr/local/etc/exim/vexim-acl-check-rcpt.conf

  # Deny if the local part contains @ or % or / or | or !. These are rarely
  # found in genuine local parts, but are often tried by people looking to
  # circumvent relaying restrictions.

  # Also deny if the local part starts with a dot. Empty components aren't
  # strictly legal in RFC 2822, but Exim allows them because this is common.
  # However, actually starting with a dot may cause trouble if the local part
  # is used as a file name (e.g. for a mailing list).

  deny    local_parts   = ^.*[@%!/|] : ^\\.

  # Accept mail to postmaster in any local domain, regardless of the source,
  # and without verifying the sender.

  accept  local_parts   = postmaster
          domains       = +local_domains

  # Deny unless the sender address can be verified.
  # require verify        = sender

  #############################################################################
  # There are no checks on DNS "black" lists because the domains that contain
  # these lists are changing all the time. However, here are two examples of
  # how you could get Exim to perform a DNS black list lookup at this point.
  # The first one denies, while the second just warns.
  #
  # deny    message       = rejected because $sender_host_address is in a black list at $dnslist_domain\n$dnslist_text
  #         dnslists      = black.list.example
  #
  # warn    message       = X-Warning: $sender_host_address is in a black list at $dnslist_domain
  #         log_message   = found in $dnslist_domain
  #         dnslists      = black.list.example
  #############################################################################

  # Accept if the address is in a local domain, but only if the recipient can
  # be verified. Otherwise deny. The "endpass" line is the border between
  # passing on to the next ACL statement (if tests above it fail) or denying
  # access (if tests below it fail).

  accept  domains       = +local_domains
          endpass
          verify        = recipient

  # Accept if the address is in a domain for which we are relaying, but again,
  # only if the recipient can be verified.

  accept  domains       = +relay_to_domains
          endpass
          verify        = recipient

  # If control reaches this point, the domain is neither in +local_domains
  # nor in +relay_to_domains.

  # Accept if the message comes from one of the hosts for which we are an
  # outgoing relay. Recipient verification is omitted here, because in many
  # cases the clients are dumb MUAs that don't cope well with SMTP error
  # responses. If you are actually relaying out from MTAs, you should probably
  # add recipient verification here.

  accept  hosts         = +relay_from_hosts

  # Accept if the message arrived over an authenticated connection, from
  # any host. Again, these messages are usually from MUAs, so recipient
  # verification is omitted.

  accept  authenticated = *

  # Reaching the end of the ACL causes a "deny", but we might as well give
  # an explicit message.

  deny    message       = relay not permitted


# This access control list is used for content scanning with the exiscan-acl
# patch. You must also uncomment the entry for acl_smtp_data (scroll up),
# otherwise the ACL will not be used. IMPORTANT: the default entries here
# should be treated as EXAMPLES. You MUST read the file doc/exiscan-acl-spec.txt
# to fully understand what you are doing ...

acl_check_content:

  # Include Vexim specific rcpt ACLs
  .include /usr/local/etc/exim/vexim-acl-check-content.conf

  # finally accept all the rest
  accept
  

######################################################################
#                      ROUTERS CONFIGURATION                         #
#               Specifies how addresses are handled                  #
######################################################################
#     THE ORDER IN WHICH THE ROUTERS ARE DEFINED IS IMPORTANT!       #
# An address is passed to each router in turn until it is accepted.  #
######################################################################

begin routers

# This router routes to remote hosts over SMTP by explicit IP address,
# when an email address is given in "domain literal" form, for example,
# <user@[192.168.35.64]>. The RFCs require this facility. However, it is
# little-known these days, and has been exploited by evil people seeking
# to abuse SMTP relays. Consequently it is commented out in the default
# configuration. If you uncomment this router, you also need to uncomment
# allow_domain_literals above, so that Exim can recognize the syntax of
# domain literal addresses.

# domain_literal:
#   driver = ipliteral
#   domains = ! +local_domains
#   transport = remote_smtp


# This router routes addresses that are not in local domains by doing a DNS
# lookup on the domain name. Any domain that resolves to 0.0.0.0 or to a
# loopback interface address (127.0.0.0/8) is treated as if it had no DNS
# entry. Note that 0.0.0.0 is the same as 0.0.0.0/32, which is commonly treated
# as the local host inside the network stack. It is not 0.0.0.0/0, the default
# route. If the DNS lookup fails, no further routers are tried because of
# the no_more setting, and consequently the address is unrouteable.

dnslookup:
  driver = dnslookup
  domains = ! +local_domains
  transport = remote_smtp
  ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8
  no_more

mailman_router:
  driver = accept
  require_files = MAILMAN_HOME/lists/$local_part/config.pck
  local_part_suffix_optional
  local_part_suffix = -bounces : -bounces+* : \
                      -confirm+* : -join : -leave : \
                      -owner : -request : -admin
  headers_remove = X-Spam-Score:X-Spam-Report
  transport = mailman_transport

# The remaining routers handle addresses in the local domain(s).

# The virtual_domains alias, queries your given mysql database
# and requests the home directory of the user's maildir, the
# UID and the GID of the process to deliver under. You can be
# clever, and set the UID and GID of a user, to that of a
# local system user, so they can check their mail locally,
# rather than having to over a network. Three different
# transports are specified. virtual_delivery delivers if the
# home directory is a given directory on a locally accessible
# file system. address_reply is called if the home directory
# returns an email address (making the rcpt address an alias).
# finally, pipe_transport is used to pipe the mail to a
# process.

# This router caused me so much s*** it's untrue.
# If your db lookup returns 'no data', then $spam_in_score is
# greater than no data, and mail gets deleted.
# Eventually got this working with Philip Hazel and Codiac's help.
ditch_maxmsgsize:
  driver = redirect
  allow_fail
  condition = ${if >{$message_size}{${lookup mysql{select users.maxmsgsize from users,domains \
  		where localpart = '${quote_mysql:$local_part}' \
		and domain = '${quote_mysql:$domain}' \
		and users.maxmsgsize > 0 \
		and users.domain_id=domains.domain_id }{${value}K}fail}} {yes}{no}}
  data = :fail:\n\Your message is too big.\n \
	 	Your message was rejected because the user $local_part@$domain\n \
		does not accept messages larger than \
		${lookup mysql{select users.maxmsgsize from users,domains \
		where localpart = '${quote_mysql:$local_part}' \
		and domain = '${quote_mysql:$domain}' \
		and users.maxmsgsize > 0 \
		and users.domain_id=domains.domain_id}{${value}K}fail} Kb.
  local_part_suffix = -*
  local_part_suffix_optional
  retry_use_local_part

ditch_malware:
  driver = redirect
  allow_fail
  data = :blackhole:
  condition = ${if and { {match {$h_X-ACL-Warn:}{.*malware.*}} \
                         {eq {${lookup mysql{select users.on_avscan from users,domains \
		                where localpart = '${quote_mysql:$local_part}' \
		                and domain = '${quote_mysql:$domain}' \ 
		                and users.on_avscan = '1' \
		                and users.domain_id=domains.domain_id}}}{1} }} {yes}{no} }

ditch_spam:
  driver = redirect
  allow_fail
  data = :blackhole:
  condition = ${if >{$spam_score_int}{${lookup mysql{select users.sa_refuse * 10 from users,domains \
                where localpart = '${quote_mysql:$local_part}' \
                and domain = '${quote_mysql:$domain}' \
        	and users.on_spamassassin = '1' \
                and users.domain_id=domains.domain_id \
		and users.sa_refuse > 0 }{$value}fail}} {yes}{no}}
  local_part_suffix = -*
  local_part_suffix_optional
  retry_use_local_part

ditch_hdrmailer:
  driver = redirect
  allow_fail
  data = :blackhole:
  condition = ${if eq {${lookup mysql{select count(*) from blocklists,users,domains \
  			where blocklists.blockhdr = 'x-mailer' \
			and blocklists.blockval = '${quote_mysql:$h_x-mailer:}' \
			and users.localpart = '${quote_mysql:$local_part}' \
  			and domains.domain = '${quote_mysql:$domain}' \
			and domains.domain_id=blocklists.domain_id \
			and users.user_id=blocklists.user_id}}}{1} {yes}{no}}
  local_part_suffix = -*
  local_part_suffix_optional
  retry_use_local_part

ditch_hdrto:
  driver = redirect
  allow_fail
  data = :blackhole:
  condition = ${if eq {${lookup mysql{select count(*) from blocklists,users,domains \
  			where blocklists.blockhdr = 'to' \
			and blocklists.blockval = '${quote_mysql:$h_to:}' \
			and users.localpart = '${quote_mysql:$local_part}' \
  			and domains.domain = '${quote_mysql:$domain}' \
			and domains.domain_id=blocklists.domain_id \
			and users.user_id=blocklists.user_id}}}{1} {yes}{no}}
  local_part_suffix = -*
  local_part_suffix_optional
  retry_use_local_part

ditch_hdrfrom:
  driver = redirect
  allow_fail
  data = :blackhole:
  condition = ${if eq {${lookup mysql{select count(*) from blocklists,users,domains \
  			where blocklists.blockhdr = 'from' \
			and blocklists.blockval = '${quote_mysql:$h_from:}' \
			and users.localpart = '${quote_mysql:$local_part}' \
  			and domains.domain = '${quote_mysql:$domain}' \
			and domains.domain_id=blocklists.domain_id \
			and users.user_id=blocklists.user_id}}}{1} {yes}{no}}
  local_part_suffix = -*
  local_part_suffix_optional
  retry_use_local_part

ditch_hdrsubject:
  driver = redirect
  allow_fail
  data = :blackhole:
  condition = ${if eq {${lookup mysql{select count(*) from blocklists,users,domains \
  			where blocklists.blockhdr = 'subject' \
			and blocklists.blockval = '${quote_mysql:$h_subject:}' \
			and users.localpart = '${quote_mysql:$local_part}' \
  			and domains.domain = '${quote_mysql:$domain}' \
			and domains.domain_id=blocklists.domain_id \
			and users.user_id=blocklists.user_id}}}{1} {yes}{no}}
  local_part_suffix = -*
  local_part_suffix_optional
  retry_use_local_part

virtual_vacation:
  driver = accept
  condition = ${if and { {!match {$h_precedence:}{(?i)junk|bulk|list}} \
                         {eq {${lookup mysql{select users.on_vacation from users,domains \
		                where localpart = '${quote_mysql:$local_part}' \
		                and domain = '${quote_mysql:$domain}' \ 
		                and users.on_vacation = '1' \
		                and users.domain_id=domains.domain_id}}}{1} }} {yes}{no} }
  no_verify
  no_expn
  unseen
  transport = virtual_vacation_delivery

virtual_forward:
  driver = redirect
  check_ancestor
  unseen = ${if eq {${lookup mysql{select unseen from users,domains \
		where localpart = '${quote_mysql:$local_part}' \
		and domain = '${quote_mysql:$domain}' \
		and users.on_forward = '1' \
		and users.domain_id=domains.domain_id}}}{1} {yes}{no}}
  data = ${lookup mysql{select forward from users,domains \
	where localpart='${quote_mysql:$local_part}' \
	and domain='${quote_mysql:$domain}' \
	and users.domain_id=domains.domain_id \
	and on_forward = '1'}}
  # We explicitly make this condition NOT forward mailing list mail!
  condition = ${if and { {!match {$h_precedence:}{(?i)junk}} \
                         {eq {${lookup mysql{select users.on_forward from users,domains \
		                where localpart = '${quote_mysql:$local_part}' \
		                and domain = '${quote_mysql:$domain}' \ 
		                and users.on_forward = '1' \
		                and users.domain_id=domains.domain_id}}}{1} }} {yes}{no} }
  
virtual_domains:
  driver = redirect
  allow_fail
  data = ${lookup mysql{select smtp from users,domains \
  		where localpart = '${quote_mysql:$local_part}' \
		and domain = '${quote_mysql:$domain}' \
		and domains.enabled = '1' \
		and users.enabled = '1' \
		and users.domain_id = domains.domain_id}}
  headers_add = ${if >{$spam_score_int}{${lookup mysql{select users.sa_tag * 10 from users,domains \
  		where localpart = '${quote_mysql:$local_part}' \
		and domain = '${quote_mysql:$domain}' \
		and users.on_spamassassin = '1' \
		and users.domain_id=domains.domain_id }{$value}fail}} {X-Spam-Flag: YES\n}{} }
  headers_remove = ${if or { { <{$spam_score_int}{1} } \
  			     { <{$spam_score_int}{${lookup mysql{select users.sa_tag * 10 from users,domains \
			       where localpart = '${quote_mysql:$local_part}' \
			       and domain = '${quote_mysql:$domain}' \
			       and users.on_spamassassin = 1 \
			       and users.domain_id=domains.domain_id}{$value}fail}} } \
			     { eq {0}{${lookup mysql{select users.sa_tag * 10 from users,domains \
			       where localpart = '${quote_mysql:$local_part}' \
			       and domain = '${quote_mysql:$domain}' \
			       and users.on_spamassassin = 0 \
			       and users.domain_id=domains.domain_id}{$value}fail}}} \
			   } {X-Spam-Score:X-Spam-Report} }
  local_part_suffix = -*
  local_part_suffix_optional
  retry_use_local_part
  file_transport = virtual_delivery
  reply_transport = address_reply
  pipe_transport = address_pipe
  
.include /usr/local/etc/exim/vexim-group-router.conf

virtual_domains_catchall:
  driver = redirect
  allow_fail
  data = ${lookup mysql{select smtp from users,domains where localpart = '*' \
  		and domain = '${quote_mysql:$domain}' \
		and users.domain_id = domains.domain_id}}
  retry_use_local_part
  file_transport = virtual_delivery
  reply_transport = address_reply
  pipe_transport = address_pipe_catchall

virtual_domain_alias:
  driver = redirect
  allow_fail
  data = ${lookup mysql{select concat('${quote_mysql:$local_part}@', domain) \
  		from domains,domainalias where domainalias.alias = '${quote_mysql:$domain}' \
		and domainalias.domain_id = domains.domain_id}}
  retry_use_local_part
  

# This router handles aliasing using a linearly searched alias file with the
# name /etc/aliases. When this configuration is installed automatically,
# the name gets inserted into this file from whatever is set in Exim's
# build-time configuration. The default path is the traditional /etc/aliases.
# If you install this configuration by hand, you need to specify the correct
# path in the "data" setting below.
#
##### NB  You must ensure that the alias file exists. It used to be the case
##### NB  that every Unix had that file, because it was the Sendmail default.
##### NB  These days, there are systems that don't have it. Your aliases
##### NB  file should at least contain an alias for "postmaster".
#
# If any of your aliases expand to pipes or files, you will need to set
# up a user and a group for these deliveries to run under. You can do
# this by uncommenting the "user" option below (changing the user name
# as appropriate) and adding a "group" option if necessary. Alternatively, you
# can specify "user" on the transports that are used. Note that the transports
# listed below are the same as are used for .forward files; you might want
# to set up different ones for pipe and file deliveries from aliases.

system_aliases:
  driver = redirect
  allow_fail
  allow_defer
  data = ${lookup{$local_part}lsearch{/etc/aliases}}
  user = mailnull
  group = mail
  file_transport = address_file
  pipe_transport = address_pipe


# This router handles forwarding using traditional .forward files in users'
# home directories. If you want it also to allow mail filtering when a forward
# file starts with the string "# Exim filter", uncomment the "allow_filter"
# option.

# The no_verify setting means that this router is skipped when Exim is
# verifying addresses. Similarly, no_expn means that this router is skipped if
# Exim is processing an EXPN command.

# The check_ancestor option means that if the forward file generates an
# address that is an ancestor of the current one, the current one gets
# passed on instead. This covers the case where A is aliased to B and B
# has a .forward file pointing to A.

# The three transports specified at the end are those that are used when
# forwarding generates a direct delivery to a file, or to a pipe, or sets
# up an auto-reply, respectively.

userforward:
  driver = redirect
  check_local_user
  file = $home/.forward
  no_verify
  no_expn
  check_ancestor
# allow_filter
  file_transport = address_file
  pipe_transport = address_pipe_local
  reply_transport = address_reply
  condition = ${if exists{$home/.forward} {yes} {no} }
  group = mail


# This router matches local user mailboxes. If the router fails, the error
# message is "Unknown user".

localuser:
  driver = accept
  check_local_user
  transport = local_delivery
  cannot_route_message = Unknown user



######################################################################
#                      TRANSPORTS CONFIGURATION                      #
######################################################################
#                       ORDER DOES NOT MATTER                        #
#     Only one appropriate transport is called for each delivery.    #
######################################################################

# A transport is used only when referenced from a router that successfully
# handles an address.

begin transports


# This transport is used for delivering messages over SMTP connections.

remote_smtp:
  driver = smtp

# This transport is used for local delivery to user mailboxes in traditional
# BSD mailbox format. By default it will be run under the uid and gid of the
# local user, and requires the sticky bit to be set on the /var/mail directory.
# Some systems use the alternative approach of running mail deliveries under a
# particular group instead of using the sticky bit. The commented options below
# show how this can be done.

local_delivery:
  driver = appendfile
  file = /var/mail/$local_part
  delivery_date_add
  envelope_to_add
  return_path_add
  group = mail
  user = $local_part
  mode = 0660
  no_mode_fail_narrower

virtual_delivery:
  driver = appendfile
  envelope_to_add
  return_path_add
  mode = 0600
  maildir_format = true
  create_directory = true
  directory = ${lookup mysql{select smtp from users,domains \
		where localpart = '${quote_mysql:$local_part}' \
		and domain = '${quote_mysql:$domain}' \
		and users.domain_id = domains.domain_id}}
  user = ${lookup mysql{select users.uid  from users,domains \
		where localpart = '${quote_mysql:$local_part}' \
		and domain = '${quote_mysql:$domain}' \
		and users.domain_id = domains.domain_id}}
  group = ${lookup mysql{select users.gid from users,domains \
		where localpart = '${quote_mysql:$local_part}' \
		and domain = '${quote_mysql:$domain}' \
		and users.domain_id = domains.domain_id}}
  quota = ${lookup mysql{select users.quota from users,domains \
  		where localpart = '${quote_mysql:$local_part}' \
		and domain = '${quote_mysql:$domain}' \
		and users.domain_id = domains.domain_id}{${value}M}}
  quota_is_inclusive = false
  #quota_size_regex = ,S=(\d+):
  quota_warn_threshold = 75%
  maildir_use_size_file = false
  quota_warn_message = "To: $local_part@$domain\n\
  			Subject: Mailbox quota warning\n\n\
			This message was automatically generated by the mail delivery software.\n\n\
			You are now using over 75% of your allocated mail storage quota.\n\n\
			If your mailbox fills completely, further incoming messages will be automatically\n\
			returned to their senders.\n\n\
			Please take note of this and remove unwanted mail from your mailbox.\n"

virtual_vacation_delivery:
  driver   = autoreply
  from     = "${local_part}@${domain}"
  to       = ${sender_address}
  subject  = "Autoreply from ${local_part}@${domain}"
  text     = ${lookup mysql{select vacation from users,domains \
		where domain='${quote_mysql:$domain}' \
		and localpart='${quote_mysql:$local_part}' \
		and users.domain_id=domains.domain_id}}

mailman_transport:
  driver = pipe
  command = MAILMAN_WRAP \
            '${if def:local_part_suffix \
                  {${sg{$local_part_suffix}{-(\\w+)(\\+.*)?}{\$1}}} \
                  {post}}' \
            $local_part
  current_directory = MAILMAN_HOME
  home_directory = MAILMAN_HOME
  user = MAILMAN_USER
  group = MAILMAN_GROUP

# This transport is used for handling pipe deliveries generated by alias or
# .forward files. If the pipe generates any standard output, it is returned
# to the sender of the message as a delivery error. Set return_fail_output
# instead of return_output if you want this to happen only when the pipe fails
# to complete normally. You can set different transports for aliases and
# forwards if you want to - see the references to address_pipe in the routers
# section above.

address_pipe:
  driver = pipe
  return_output
  user = ${lookup mysql{select users.uid from users,domains where localpart = '${quote_mysql:$local_part}' and domain = '${quote_mysql:$domain}' and users.domain_id = domains.domain_id}}
  group = ${lookup mysql{select users.gid from users,domains where localpart = '${quote_mysql:$local_part}' and domain = '${quote_mysql:$domain}' and users.domain_id = domains.domain_id}}

address_pipe_catchall:
  driver = pipe
  return_output
  user = ${lookup mysql{select users.uid from users,domains where localpart = '*' and domain = '${quote_mysql:$domain}' and users.domain_id = domains.domain_id}}
  group = ${lookup mysql{select users.gid from users,domains where localpart = '*' and domain = '${quote_mysql:$domain}' and users.domain_id = domains.domain_id}}

address_pipe_local:
  driver = pipe
  return_output


# This transport is used for handling deliveries directly to files that are
# generated by aliasing or forwarding.

address_file:
  driver = appendfile
  delivery_date_add
  envelope_to_add
  return_path_add


# This transport is used for handling autoreplies generated by the filtering
# option of the userforward router.

address_reply:
  driver = autoreply



######################################################################
#                      RETRY CONFIGURATION                           #
######################################################################

begin retry

# This single retry rule applies to all domains and all errors. It specifies
# retries every 15 minutes for 2 hours, then increasing retry intervals,
# starting at 1 hour and increasing each time by a factor of 1.5, up to 16
# hours, then retries every 6 hours until 4 days have passed since the first
# failed delivery.

# Domain               Error       Retries
# ------               -----       -------

*                      *           F,2h,15m; G,16h,1h,1.5; F,14d,6h



######################################################################
#                      REWRITE CONFIGURATION                         #
######################################################################

# There are no rewriting specifications in this default configuration file.

begin rewrite



######################################################################
#                   AUTHENTICATION CONFIGURATION                     #
######################################################################

# There are no authenticator specifications in this default configuration file.

begin authenticators

plain_login:
        driver = plaintext
        public_name = PLAIN
        server_condition = ${lookup mysql{SELECT '1' FROM users \
				WHERE username = '${quote_mysql:$2}' \
				AND clear = '${quote_mysql:$3}'} {yes}{no}}
        server_set_id = $2

fixed_login:
        driver = plaintext
        public_name = LOGIN
        server_prompts = "Username:: : Password::"
        server_condition = ${lookup mysql{SELECT '1' FROM users \
				WHERE username = '${quote_mysql:$1}' \
				AND clear = '${quote_mysql:$2}'} {yes}{no}}                    
        server_set_id = $1

fixed_cram:
        driver = cram_md5
        public_name = CRAM-MD5
        server_secret = ${lookup mysql{SELECT clear FROM users \
				WHERE username = '${quote_mysql:$1}'}{$value}fail}
        server_set_id = $1


######################################################################
#                   CONFIGURATION FOR local_scan()                   #
######################################################################

# If you have built Exim to include a local_scan() function that contains
# tables for private options, you can define those options here. Remember to
# uncomment the "begin" line. It is commented by default because it provokes
# an error with Exim binaries that are not built with LOCAL_SCAN_HAS_OPTIONS
# set in the Local/Makefile.

# begin local_scan


# End of Exim configuration file

Код: Выделить всё

plain_login authenticator failed for localhost (www.domain.ru) [127.0.0.1]: 535 Incorrect authentication data

Код: Выделить всё

begin authenticators

plain_login:
        driver = plaintext
        public_name = PLAIN
        server_condition = ${lookup mysql{SELECT '1' FROM users \
            WHERE username = '${quote_mysql:$2}' \
            AND clear = '${quote_mysql:$3}'} {yes}{no}}
        server_set_id = $2