forum.lissyara.su

Код: Выделить всё

cat /usr/local/etc/mpd5/mpd.conf

Код: Выделить всё

startup:
	# configure the console
	set console self 127.0.0.1 5005
	set console user foo bar
	set console user foo1 bar1
	set console open
	# configure the web server
	set web self 127.0.0.1 5006
	set web user foo bar
	set web open

# Default configuration is "pptp_server"

default:
	load pptp_server

pptp_server:

# Define dynamic IP address pool.

	set ippool add pool1 10.167.169.2 10.167.169.250


# Create clonable bundle template named B

	create bundle template B

	set iface enable proxy-arp

	set iface idle 0

	set iface enable tcpmssfix

	set ipcp yes vjcomp

# Specify IP address pool for dynamic assigment.

	set ipcp ranges 10.167.169.1/32 ippool pool1

	set ipcp dns 192.168.100.52

	set ipcp nbns 192.168.100.52

# The five lines below enable Microsoft Point-to-Point encryption

# (MPPE) using the ng_mppc(8) netgraph node type.

	set bundle enable compression

	set ccp yes mppc

	set ccp yes mpp-e40

	set ccp yes mpp-e128

	set ccp yes mpp-stateless


# Create clonable link template named L

	create link template L pptp
	
	set link action bundle B

# Multilink adds some overhead, but gives full 1500 MTU.

	set link enable multilink

	set link yes acfcomp protocomp

	set link no pap chap

	set link enable chap

# We can use use RADIUS authentication/accounting by including

# another config section with label 'radius'.

#	load radius

	 set link keep-alive 10 60

# We reducing link mtu to avoid GRE packet fragmentation.

	set link mtu 1460

# Configure PPTP

        set pptp self 82.*.*.*

# Allow to accept calls

        set link enable incoming 

Код: Выделить всё

pptp_server:
   set ippool add pool1 10.167.169.2 10.167.169.250

   create bundle template B
   set iface enable proxy-arp
   set iface enable tcpmssfix
   set ipcp ranges 10.167.169.1/32 ippool pool1
   set ipcp dns 192.168.100.52
   set ipcp nbns 192.168.100.52
   set bundle enable compression
   set ccp yes mppc
   set ccp yes mpp-e40
   set ccp yes mpp-e128
   set ccp yes mpp-stateless

   create link template L pptp
   set link action bundle B
   set link no pap
   set link enable chap
   set pptp self 82.*.*.*
   set link enable incoming