forum.lissyara.su

Если проблема не решается сама, значит она неразрешима
https://forum.lissyara.su/

Проблема при обновлении Free c 6.2 до 7.0

https://forum.lissyara.su/viewtopic.php?f=3&t=28099

Страница 1 из 1

Проблема при обновлении Free c 6.2 до 7.0

Добавлено: 2010-08-25 12:00:33
vaskocuturilo
Всем привет ...
Возникла следующая проблема обновился с 6.2 до 7.0. На данный момент проблема, все сервисы поднялись все пашети но в нет не пускает ...сетевушки все актив пинг в локальную сеть идет а вот на модем нет.
вот мой конф

Код: Выделить всё

cpu             I686_CPU
ident           PROXY7

options         SCHED_4BSD              # 4BSD scheduler
options         PREEMPTION              # Enable kernel thread preemption
options         INET                    # InterNETworking
#options        INET6                   # IPv6 communications protocols
#options        SCTP                    # Stream Control Transmission Protocol
options         FFS                     # Berkeley Fast Filesystem
options         SOFTUPDATES             # Enable FFS soft updates support
options         UFS_ACL                 # Support for access control lists
options         UFS_DIRHASH             # Improve performance on big directories
options         UFS_GJOURNAL            # Enable gjournal-based UFS journaling
options         MD_ROOT                 # MD is a potential root device
#options        NFSCLIENT               # Network Filesystem Client
#options        NFSSERVER               # Network Filesystem Server
#options        NFS_ROOT                # NFS usable as /, requires NFSCLIENT
options         MSDOSFS                 # MSDOS Filesystem
options         CD9660                  # ISO 9660 Filesystem
options         PROCFS                  # Process filesystem (requires PSEUDOFS)
options         PSEUDOFS                # Pseudo-filesystem framework
#options        GEOM_PART_GPT           # GUID Partition Tables.
#options        GEOM_LABEL              # Provides labelization
options         COMPAT_43TTY            # BSD 4.3 TTY compat [KEEP THIS!]
options         COMPAT_FREEBSD4         # Compatible with FreeBSD4
options         COMPAT_FREEBSD5         # Compatible with FreeBSD5
options         COMPAT_FREEBSD6         # Compatible with FreeBSD6
#options        SCSI_DELAY=5000         # Delay (in ms) before probing SCSI
#options        KTRACE                  # ktrace(1) support
options         SYSVSHM                 # SYSV-style shared memory
options         SYSVMSG                 # SYSV-style message queues
options         SYSVSEM                 # SYSV-style semaphores
options         _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         ADAPTIVE_GIANT          # Giant mutex is adaptive.
options         STOP_NMI                # Stop CPUS using NMI instead of IPI
options         AUDIT                   # Security event auditing

# Custom settings block
options         IPFIREWALL
options         IPFIREWALL_VERBOSE
options         IPFIREWALL_VERBOSE_LIMIT=100
options         IPFIREWALL_FORWARD
options         IPFIREWALL_DEFAULT_TO_ACCEPT
options         IPDIVERT
options         DUMMYNET

#device         apic                    # I/O APIC

# Bus support.  Do not remove isa, even if you have no isa slots
device          isa
device          pci

# Floppy drives
device          fdc

# ATA and ATAPI devices
device          ata
device          atadisk         # ATA disk drives
#device         ataraid         # ATA RAID drives
device          atapicd         # ATAPI CDROM drives
device          atapifd         # ATAPI floppy drives
#device         atapist         # ATAPI tape drives
options         ATA_STATIC_ID   # Static device numbering

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc          # AT keyboard controller
device          atkbd           # AT keyboard
device          psm             # PS/2 mouse

device          vga             # VGA video card driver

device          splash          # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device          sc

device          agp             # support several AGP chipsets

# Floating point support - do not disable.
device          npx

# Power management support (see NOTES for more options)
#device         apm

# Add suspend/resume support for the i8254.
device          pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device         cbb             # cardbus (yenta) bridge
#device         pccard          # PC Card (16-bit) bus
#device         cardbus         # CardBus (32-bit) bus

# Serial (COM) ports
device          sio             # 8250, 16[45]50 based serial ports

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
#device         bfe             # Broadcom BCM440x 10/100 Ethernet
#device         bge             # Broadcom BCM570xx Gigabit Ethernet
#device         dc              # DEC/Intel 21143 and various workalikes
device          fxp             # Intel EtherExpress PRO/100B (82557, 82558)
#device         lge             # Level 1 LXT1001 gigabit ethernet
#device         nge             # NatSemi DP83820 gigabit ethernet
#device         pcn             # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
device          re              # RealTek 8139C+/8169/8169S/8110S
device          rl              # RealTek 8129/8139
#device         sf              # Adaptec AIC-6915 (``Starfire'')
#device         sis             # Silicon Integrated Systems SiS 900/SiS 7016
#device         sk              # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device         ste             # Sundance ST201 (D-Link DFE-550TX)
#device         ti              # Alteon Networks Tigon I/II gigabit Ethernet
#device         tl              # Texas Instruments ThunderLAN
#device         tx              # SMC EtherPower II (83c170 ``EPIC'')
#device         vge             # VIA VT612x gigabit ethernet
#device         vr              # VIA Rhine, Rhine II
#device         wb              # Winbond W89C840F
#device         xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# Pseudo devices.
device          loop            # Network loopback
device          mem             # Memory and kernel memory devices
device          io              # I/O device
device          random          # Entropy device
device          ether           # Ethernet support
#device         sl              # Kernel SLIP
device          ppp             # Kernel PPP
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          md              # Memory "disks"
device          gif             # IPv6 and IPv4 tunneling
device          faith           # IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device          bpf             # Berkeley packet filter

# USB support
#device         uhci            # UHCI PCI->USB interface
#device         ohci            # OHCI PCI->USB interface
#device         ehci            # EHCI PCI->USB interface (USB 2.0)
#device         usb             # USB Bus (required)
#device         udbp            # USB Double Bulk Pipe devices
#device         ugen            # Generic
#device         uhid            # "Human Interface Devices"
#device         ukbd            # Keyboard
#device         ulpt            # Printer
#device         umass           # Disks/Mass storage - Requires scbus and da
#device         ums             # Mouse
#device         urio            # Diamond Rio 500 MP3 player
#device         uscanner        # Scanners

В логах вообще никаких ошибок нет .... просто не помуй в чем дело ....

Re: Проблема при обновлении Free c 6.2 до 7.0

Добавлено: 2010-08-25 12:03:28
hizel
о сетевых настройках и фаерволе нам самостоятельно догадаться?
после обновления мира, приложения обновлялись?
почему 7.0? текущий релиз 7.3

Re: Проблема при обновлении Free c 6.2 до 7.0

Добавлено: 2010-08-25 12:13:35
vaskocuturilo
это ifconfig

Код: Выделить всё

rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8<VLAN_MTU>
        ether 00:17:31:7d:e4:ad
        inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
        inet 192.168.100.254 netmask 0xffffff00 broadcast 192.168.100.255
        inet 10.38.10.254 netmask 0xffffff00 broadcast 10.38.10.255
        inet 192.168.200.254 netmask 0xffffff00 broadcast 192.168.200.255
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8<VLAN_MTU>
        ether 00:50:22:8b:8e:51
        inet XXXXXXXXXXXXXXXXX netmask 0xfffffff8 broadcast XXXXXXXXXXXXXXXXXXXXX
        inet XXXXXXXXXXXXXXXXX netmask 0xfffffff8 broadcast XXXXXXXXXXXXXXXXXXXXXXXX
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
rl2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1300
        options=8<VLAN_MTU>
        ether 00:80:48:2d:e9:95
        inet XXXXXXXXXXXXXXXXXXXXX netmask 0xffffff00 broadcast XXXXXXXXXXXXXXXXX
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        inet 127.0.0.1 netmask 0xff000000
ПРавила Фаервола

Код: Выделить всё

##### LOOPBACK #####
${cmd} 100 pass all from any to any via lo0
${cmd} 200 deny all from any to 127.0.0.0/8
${cmd} 300 deny ip from 127.0.0.0/8 to any

##### BRUTEBLOCK #####
${cmd} 350 deny ip from me to table\(1\)
${cmd} 355 deny ip from table\(1\) to me

##### STOP PRIVATE NETWORKS #####
#${cmd} 400 deny ip from 192.168.0.0/16 to any in via rl1
${cmd} 410 deny ip from 172.16.0.0/12 to any in via rl1
${cmd} 420 deny ip from 10.0.0.0/8 to any in via rl1

##### DIVERT CPN TRAFFIC ON NATD #####
${cmd} 500 divert 8669 all from 192.168.0.0/24 to 10.0.0.0/8 out via rl2
${cmd} 505 divert 8669 all from 10.0.0.0/8 to 10.18.163.254 in via rl2

##### DIVERT ALL TRAFFIC ON NATD #####
${cmd} 510 divert 8668 all from ${allow_ip0} to any out via rl1
${cmd} 511 divert 8668 all from ${allow_ip1} to any out via rl1
${cmd} 512 divert 8668 all from ${allow_ip11} to any out via rl1
${cmd} 513 divert 8668 all from ${allow_ip2} to any out via rl1
${cmd} 514 divert 8668 all from ${allow_ip3} to any out via rl1
${cmd} 515 divert 8668 all from ${allow_ip4} to any out via rl1
${cmd} 516 divert 8668 all from ${allow_ip5} to any out via rl1
${cmd} 517 divert 8668 all from ${allow_ip6} to any out via rl1
${cmd} 518 divert 8668 all from ${allow_ip7} to ${aisa} out via rl1
${cmd} 519 divert 8668 all from ${allow_ip8} to any out via rl1
${cmd} 520 divert 8668 all from ${allow_ip9} to any out via rl1
${cmd} 524 divert 8668 all from ${allow_ip10} to ${aisa} out via rl1
${cmd} 521 divert 8668 all from ${allow_adm1} to any out via rl1
${cmd} 522 divert 8668 all from ${allow_adm2} to any out via rl1
${cmd} 523 divert 8668 all from ${allow_adm3} to any out via rl1
${cmd} 524 divert 8668 all from ${allow_adm4} to any out via rl1
${cmd} 525 divert 8668 all from ${allow_adm5} to any out via rl1
${cmd} 526 divert 8668 all from ${sokia} to any out via rl1
${cmd} 527 divert 8668 all from ${terminal} to any out via rl1
${cmd} 528 divert 8668 all from ${terminal_mdm} to any out via rl1
${cmd} 529 divert 8668 all from ${net_vsk} to ${server_vsk} out via rl1
#${cmd} 529 divert 8668 all from mac-type 00030F04797F to ${server_vsk} out via rl1
${cmd} 530 divert 8668 all from any to ${ext_ip} in via rl1
${cmd} 531 divert 8668 all from ${terminal_1} to any out via rl1
${cmd} 532 divert 8668 all from ${terminal_2} to any out via rl1

##### ALLOW ICMP #####
#${cmd} 620 pass ICMP from any to ${ext_ip} icmptypes 0,3,4,11,12
#${cmd} 621 pass ICMP from ${ext_ip} to any icmptypes 3,8,12

${cmd} 620 pass ICMP from any to ${ext_ip}
${cmd} 621 pass ICMP from ${ext_ip} to any

##### Admin #####
${cmd} 622 allow all from any to ${allow_adm1}
${cmd} 623 allow all from ${allow_adm1} to any

${cmd} 624 allow all from any to ${allow_adm2}
${cmd} 625 allow all from ${allow_adm2} to any

${cmd} 626 allow all from any to ${allow_adm3}
${cmd} 627 allow all from ${allow_adm3} to any

${cmd} 651 allow all from any to ${allow_adm4}
${cmd} 652 allow all from ${allow_adm4} to any

${cmd} 628 allow all from any to ${allow_ip2}
${cmd} 629 allow all from ${allow_ip2} to any

${cmd} 630 allow all from any to ${allow_ip3}
${cmd} 631 allow all from ${allow_ip3} to any

${cmd} 632 allow all from any to ${allow_ip4}
${cmd} 633 allow all from ${allow_ip4} to any

##### ALLOW ALL FOR LOCAL INTERFACE #####
${cmd} 634 allow all from any to any via rl0
${cmd} 635 allow all from any to any via rl2

##### ALLOW GRE PACKETS #####
${cmd} 636 allow gre from any to any
# SSH
#${cmd} 636 pass tcp from any to any 22
#${cmd} 637 pass tcp from any 22 to any
${cmd} 637 pass tcp from any to ${ssh_ip} 22 via rl0
${cmd} 638 pass tcp from ${ssh_ip} 22 to any via rl0
${cmd} 639 pass tcp from ${ext_admin} to ${ext_ip} 22 via rl1
${cmd} 640 pass tcp from ${ext_ip} 22 to ${ext_admin} via rl1
${cmd} 641 deny log tcp from any to any 22
${cmd} 642 deny log tcp from any 22 to any

##### MAIL SERVICES (SMTP,POP) #####
${cmd} 643 pass tcp from any to ${ext_ip} 25 via rl0
${cmd} 644 pass tcp from ${ext_ip} 25 to any via rl0
${cmd} 645 pass tcp from any to ${ext_ip} 110 via rl0
${cmd} 646 pass tcp from ${ext_ip} 110 to any via rl0
${cmd} 647 pass tcp from any to ${ext_ip} 25 via rl1
${cmd} 648 pass tcp from ${ext_ip} 25 to any via rl1
#${cmd} 649 pass tcp from any to ${ext_ip} 110 via rl1
#${cmd} 650 pass tcp from ${ext_ip} 110 to any via rl1

##### INTERNET SERVICES (HTTP,HTTPS) #####
${cmd} 660 pass tcp from any to me 3128 via rl0
${cmd} 661 pass tcp from me 3128 to any via rl0
${cmd} 664 pass tcp from ${ext_ip} to any 80 via rl1
${cmd} 665 pass tcp from any 80 to ${ext_ip} via rl1
${cmd} 666 pass tcp from ${ext_ip} to any 443 via rl1
${cmd} 667 pass tcp from any 443 to ${ext_ip} via rl1

##### ICQ SERVICES #####
${cmd} 670 pass tcp from any to any 5190 via rl0
${cmd} 671 pass tcp from any 5190 to any via rl0
${cmd} 672 pass tcp from ${ext_ip} to any 5190 via rl1
${cmd} 673 pass tcp from any 5190 to ${ext_ip} via rl1

##### UDP SERVICES (DNS,NNTP) #####
${cmd} 680 pass udp from any to ${ext_ip} 53 via rl0
${cmd} 681 pass udp from ${ext_ip} 53 to any via rl0
${cmd} 682 pass udp from any to ${ext_ip} 119 via rl0
${cmd} 683 pass udp from ${ext_ip} 119 to any via rl0
${cmd} 684 pass udp from ${ext_ip} to any 53 via rl1
${cmd} 685 pass udp from any 53 to ${ext_ip} via rl1
${cmd} 686 pass udp from ${ext_ip} to any 119 via rl1
${cmd} 687 pass udp from any 119 to ${ext_ip} via rl1

${cmd} 697 pass tcp from ${ext_ip} to any 8080 via rl1
${cmd} 698 pass tcp from any 8080 to ${ext_ip} via rl1

##### FTP SERVICES #####
${cmd} 700 pass tcp from ${ext_ip} 21 to any via rl0
${cmd} 705 pass tcp from any to ${ext_ip} 21 via rl0
${cmd} 710 pass tcp from ${ext_ip} 20 to any via rl0
${cmd} 715 pass tcp from any to ${ext_ip} 20 via rl0

##### CARD TERMINAL #####
${cmd} 730 pass all from any to any 670
${cmd} 735 pass all from any 670 to any
${cmd} 740 pass all from any to any 668
${cmd} 745 pass all from any 668 to any
##### www.sokia.ru #####
${cmd} 750 pass tcp from me to any 9080
${cmd} 755 pass tcp from any 9080 to me
${cmd} 760 pass tcp from me to any 9876
${cmd} 765 pass tcp from any 9876 to me
${cmd} 770 pass tcp from me to any 9877
${cmd} 775 pass tcp from any 9877 to me

##### webmoney #####
${cmd} 777 pass tcp from any to any 2802
${cmd} 778 pass tcp from any 2802 to any

##### VPN #####
${cmd} 780 pass all from any to any 1723
${cmd} 785 pass all from any 1723 to any
${cmd} 790 pass all from 192.168.20.0/24 to 192.168.0.0/24
${cmd} 795 pass all from 192.168.0.0/24 to 192.168.20.0/24

##### CVSUP #####
${cmd} 810 pass all from any 5999 to ${ext_ip} in via rl1
${cmd} 815 pass all from ${ext_ip} to any 5999 out via rl1

${cmd} 1001 pass all from any to any 4661
${cmd} 1002 pass all from any 4661 to any
${cmd} 1003 pass all from any to any 4662
${cmd} 1004 pass all from any 4662 to any
${cmd} 1005 pass all from any to any 4671
${cmd} 1006 pass all from any 4671 to any
${cmd} 1007 pass all from any to any 1125
${cmd} 1008 pass all from any 1125 to any

${cmd} 2000 allow all from any to ${allow_ip11}
${cmd} 2001 allow all from ${allow_ip11} to any

${cmd} 50001 deny all from ${ext_ip} 110,143,3306 to any via rl1
${cmd} 50002 deny all from any to ${ext_ip} 110,143,3306 via rl1

#${cmd} 65000 deny log all from any to any
После обновления мира софт не обновлялся

Re: Проблема при обновлении Free c 6.2 до 7.0

Добавлено: 2010-08-25 12:26:38
hizel
ну tcpdump в зубы и на танки, а приложения все надо пересобрать

Re: Проблема при обновлении Free c 6.2 до 7.0

Добавлено: 2010-08-25 13:47:08
vaskocuturilo
Думаю, tcpdump не сильно поможет, поскольку интерфейс, смотрящий в локальную сеть работает как часы.

Re: Проблема при обновлении Free c 6.2 до 7.0

Добавлено: 2010-08-25 13:56:38
Гость
1) перегрузите модем
2) переключите сетевку смотрящую в модем на 10 халфдуплекс
3) смените сетевушку goto 1)

Re: Проблема при обновлении Free c 6.2 до 7.0

Добавлено: 2010-08-25 18:33:16
vaskocuturilo
После того как сделал mount -u /
squid заработал но более ничего
Natd напрочь отказывается робить, решил перескочить на 7.3 делаю по данной статье http://www.lissyara.su/articles/freebsd ... uildworld/
как доделадется отпишусь

Re: Проблема при обновлении Free c 6.2 до 7.0

Добавлено: 2010-08-27 6:43:35
vaskocuturilo
Обновился до версии 7.3 по ядру ...Мир выскочил с ошибкой. НО как ни странно почти все заработало, но после некоторых манипуляций, а именно

Код: Выделить всё

rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8<VLAN_MTU>
        ether 00:50:22:8b:8e:51
        inet ПЕрвичный IP -  1  netmask 0xfffffff8 broadcast XXXXXXXXXXXXXXXXXXXXX
        inet  Алиас  - 2 netmask 0xfffffff8 broadcast XXXXXXXXXXXXXXXXXXXXXXXX
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
После того как я поменял местами Первичный IP c Алиасом внастройках карточки
и прописал в натсройка фаервола алиас внешним IP заработало всё. Но если сменить все обратно, то ничего не работает ...Что такое ???? Почему так ???

Re: Проблема при обновлении Free c 6.2 до 7.0

Добавлено: 2010-08-27 8:14:32
hizel
ip в одной сети?

Re: Проблема при обновлении Free c 6.2 до 7.0

Добавлено: 2010-08-27 9:09:20
vaskocuturilo
Да IP адреса в одной сети

Re: Проблема при обновлении Free c 6.2 до 7.0

Добавлено: 2010-08-27 9:11:58
hizel
тогда alias-у обычно впендюривают /32 маску
Часовой пояс: UTC+03:00
Страница 1 из 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/