Страница 1 из 1
Вопрос по поводу S.M.A.R.T.'a
Добавлено: 2007-07-23 18:40:19
Qaz
На работе были проблемы с охлаждением хардов, прикрутил вентиляторы к винтам и включил смарт, устанавил smartmontools, всё бы хорошо, если бы оно логи писало...а так напрочь отказываетса...
кусок из syslogd.conf'a
# S.M.A.R.T.
local3.* /var/log/smartd.log
и из rc.conf'a
smartd_enable="YES"
smartd_flags="-l local3 --interval=300"
сам конфиг:
/dev/ad4 -a -m
my@e-mail.com -o on -S on -s (S/../.././22|L/../../6/23)
/dev/ad6 -a -m
my@e-mail.com -o on -S on -s (S/../.././22|L/../../6/23)
в лог /var/log/smartd.log ничего не пишет, всё вываливаетса в messages, это первый вопрос. Второй...в логах после того как поставил прогу
Jul 23 18:29:26 fire smartd[25368]: Device: /dev/ad6, 1 Currently unreadable (pending) sectors
Jul 23 18:29:26 fire smartd[25368]: Device: /dev/ad6, 1 Offline uncorrectable sectors
Jul 23 18:34:26 fire smartd[25368]: Device: /dev/ad6, 1 Currently unreadable (pending) sectors
Jul 23 18:34:26 fire smartd[25368]: Device: /dev/ad6, 1 Offline uncorrectable sectors
я так понимаю это оно на бед ругаетса? ad4 у меня первый винт, ad6 - програмный рейд, зеркало первого.
Re: Вопрос по поводу S.M.A.R.T.'a
Добавлено: 2007-07-23 18:58:38
Alex Keda
Qaz писал(а):
кусок из syslogd.conf'a
место где в конфиге поместил - тоже имеет значение.
показывай весь.
Qaz писал(а):
в лог /var/log/smartd.log ничего не пишет, всё вываливаетса в messages, это первый вопрос. Второй...в логах после того как поставил прогу
Jul 23 18:29:26 fire smartd[25368]: Device: /dev/ad6, 1 Currently unreadable (pending) sectors
Jul 23 18:29:26 fire smartd[25368]: Device: /dev/ad6, 1 Offline uncorrectable sectors
Jul 23 18:34:26 fire smartd[25368]: Device: /dev/ad6, 1 Currently unreadable (pending) sectors
Jul 23 18:34:26 fire smartd[25368]: Device: /dev/ad6, 1 Offline uncorrectable sectors
я так понимаю это оно на бед ругаетса? ad4 у меня первый винт, ad6 - програмный рейд, зеркало первого.
да. сыпется...
Re: Вопрос по поводу S.M.A.R.T.'a
Добавлено: 2007-07-23 19:04:12
Qaz
*.err;kern.warning;auth.notice;mail.crit /dev/console
*.notice;authpriv.none;kern.debug;lpr.info;mail.crit;news.err /var/log/messages
security.* /var/log/security
auth.info;authpriv.info /var/log/auth.log
mail.info /var/log/maillog
lpr.info /var/log/lpd-errs
ftp.info /var/log/xferlog
cron.* /var/log/cron
*.=debug /var/log/debug.log
*.emerg *
# uncomment this to log all writes to /dev/console to /var/log/console.log
#console.info /var/log/console.log
# uncomment this to enable logging of all log messages to /var/log/all.log
# touch /var/log/all.log and chmod it to mode 600 before it will work
#*.* /var/log/all.log
# uncomment this to enable logging to a remote loghost named loghost
#*.* @loghost
# uncomment these if you're running inn
# news.crit /var/log/news/news.crit
# news.err /var/log/news/news.err
# news.notice /var/log/news/news.notice
!startslip
*.* /var/log/slip.log
!ppp
*.* /var/log/ppp.log
!pppd
*.* /var/log/pppd.log
# S.M.A.R.T.
local3.* /var/log/smartd.log
Re: Вопрос по поводу S.M.A.R.T.'a
Добавлено: 2007-07-23 19:06:41
Alex Keda
ну ты ещё ниже воткнул бы...
Код: Выделить всё
# $FreeBSD: src/etc/syslog.conf,v 1.28 2005/03/12 12:31:16 glebius Exp $
#
# Spaces ARE valid field separators in this file. However,
# other *nix-like systems still insist on using tabs as field
# separators. If you are sharing this file between systems, you
# may want to use only tabs as field separators here.
# Consult the syslog.conf(5) manpage.
*.err;kern.warning;auth.notice;mail.crit /dev/console
*.notice;authpriv.none;kern.debug;lpr.info;mail.crit;news.err /var/log/messages
security.* /var/log/security
auth.info;authpriv.info /var/log/auth.log
#auth.info;authpriv.info |exec /usr/local/sbin/sshit
mail.info /var/log/maillog
lpr.info /var/log/lpd-errs
ftp.* /var/log/xferlog
cron.* /var/log/cron
*.=debug /var/log/debug.log
*.emerg *
# uncomment this to log all writes to /dev/console to /var/log/console.log
#console.info /var/log/console.log
local1.* /var/log/c-icap.log
local2.* /var/log/smartd.log
# uncomment this to enable logging of all log messages to /var/log/all.log
# touch /var/log/all.log and chmod it to mode 600 before it will work
daemon.alert /var/log/alert
*.* /var/log/all.log
# uncomment this to enable logging to a remote loghost named loghost
#*.* @loghost
# uncomment these if you're running inn
# news.crit /var/log/news/news.crit
# news.err /var/log/news/news.err
# news.notice /var/log/news/news.notice
!startslip
*.* /var/log/slip.log
!ppp
*.* /var/log/ppp.log
Re: Вопрос по поводу S.M.A.R.T.'a
Добавлено: 2007-07-23 19:16:11
Qaz
спасибо

вопрос решон)