Страница 1 из 1

ошибки в работе squidguard

Добавлено: 2014-11-12 17:03:44
doker
Все привет!
подсобите пжл в проблемке . прикручиваю на Squid 3.3.13 squidGuard-1.4_15 на FreeBSD 10.0-RELEASE-p12
но в cache.log ругается - kid1| ERROR: URL-rewrite produces invalid request: GET ERR HTTP1.1
настройки сквида и гварда дефолтные (в гвард только свой адрес подставил)

Код: Выделить всё

squidGuard.conf
dbhome /usr/local/share/examples/squidGuard/blacklists
logdir /var/log/squidGuard

#
# TIME RULES:
# abbrev for weekdays:
# s = sun, m = mon, t =tue, w = wed, h = thu, f = fri, a = sat


#
# REWRITE RULES:
#

rew dmz {
        s@://admin/@://admin.foo.bar.de/@i
        s@://foo.bar.de/@://www.foo.bar.de/@i
}

#
# SOURCE ADDRESSES:
#

src admin {
        ip              1.2.3.4 1.2.3.5
        user            root foo bar
}

src foo-clients {
        ip              172.16.2.32-172.16.2.100 172.16.2.100 172.16.2.200
}

src bar-clients {
        ip              10.0.11.26
}

#
# DESTINATION CLASSES:
#

dest good {
}
dest local {
}

dest adult {
        domainlist      porn/domains
        urllist         porn/urls
        expressionlist  porn/expressions
        redirect        http://admin.foo.bar.de/cgi/blocked?clientaddr=%a+clientname=%n+clientuser=%i+clientgroup=%s+targetgroup=%t+url=%u
}


acl {
        admin {
                pass     any
        }

        foo-clients {
                pass     good !in-addr !adult any
        } else {
                pass any
        }

        bar-clients {
                pass    !adult
        }

        default {
                pass     local none
                rewrite  dmz
                redirect http://admin.foo.bar.de/cgi/blocked?clientaddr=%a+clientname=%n+clientuser=%i+clientgroup=%s+targetgroup=%t+url=%u
        }
}

Код: Выделить всё


squid.conf

#
# Recommended minimum configuration:
#

# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
acl localnet src 10.0.0.0/8     # RFC1918 possible internal network
acl localnet src 172.16.0.0/12  # RFC1918 possible internal network
acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
acl localnet src       # RFC 4193 local private network range
acl localnet src      # RFC 4291 link-local (directly plugged) machines

acl SSL_ports port 443
acl Safe_ports port 80          # http
acl Safe_ports port 21          # ftp
acl Safe_ports port 443         # https
acl Safe_ports port 70          # gopher
acl Safe_ports port 210         # wais
acl Safe_ports port 1025-65535  # unregistered ports
acl Safe_ports port 280         # http-mgmt
acl Safe_ports port 488         # gss-http
acl Safe_ports port 591         # filemaker
acl Safe_ports port 777         # multiling http
acl CONNECT method CONNECT

#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
http_access deny !Safe_ports

# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports

# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager

# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost

#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
http_access allow localhost

# And finally deny all other access to this proxy
http_access deny all

# Squid normally listens to port 3128
http_port 3128

# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /var/squid/cache/squid 100 16 256

# Leave coredumps in the first cache dir
coredump_dir /var/squid/cache/squid

#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp:           1440    20%     10080
refresh_pattern ^gopher:        1440    0%      1440
refresh_pattern -i (/cgi-bin/|\?) 0     0%      0
refresh_pattern .               0       20%     4320



#  TAG: url_rewrite_program

url_rewrite_program /usr/local/bin/squidGuard -c /letc/squid/squidGuard.conf
redirect_children 20
redirector_bypass off

отдельно гвард работает



мозг кипит.. помогайте пжл

Re: ошибки в работе squidguard

Добавлено: 2014-11-12 17:29:51
doker
накатил сквид 3.4 - заработало ) вспем спасибо