Страница 1 из 1

мобильник в ядре

Добавлено: 2007-10-26 16:55:12
catdog_
раньше мой мобильник определялся как da0
решил нормально пересобрать ядро
но da в ядре не ремил (секция SCSI peripherals)

Код: Выделить всё

machine		i386
# cpu			I486_CPU
# cpu			I586_CPU
cpu		I686_CPU
ident		CUST

# To statically compile in device wiring instead of /boot/device.hints
# hints		"GENERIC.hints"		# Default places to look for devices.

# makeoptions		DEBUG=-g		# Build kernel with gdb(1) debug symbols

options 	SCHED_4BSD		# 4BSD scheduler
options 	PREEMPTION		# Enable kernel thread preemption
options 	INET			# InterNETworking
# options	 	INET6			# IPv6 communications protocols
options 	FFS			# Berkeley Fast Filesystem
options 	SOFTUPDATES		# Enable FFS soft updates support
options 	UFS_ACL			# Support for access control lists
options 	UFS_DIRHASH		# Improve performance on big directories
# options 		MD_ROOT			# MD is a potential root device

# options 		NFSCLIENT		# Network Filesystem Client
# options	 	NFSSERVER		# Network Filesystem Server
# options	 	NFS_ROOT		# NFS usable as /, requires NFSCLIENT

options 	MSDOSFS			# MSDOS Filesystem
options 	CD9660			# ISO 9660 Filesystem
options 	PROCFS			# Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		# Pseudo-filesystem framework
options 	GEOM_GPT		# GUID Partition Tables.
options 	COMPAT_43		# Compatible with BSD 4.3 [KEEP THIS!]
options 	COMPAT_FREEBSD4		# Compatible with FreeBSD4
options 	COMPAT_FREEBSD5		# Compatible with FreeBSD5
options 	SCSI_DELAY=5000		# Delay (in ms) before probing SCSI
options 	KTRACE			# ktrace(1) support
options 	SYSVSHM			# SYSV-style shared memory
options 	SYSVMSG			# SYSV-style message queues
options 	SYSVSEM			# SYSV-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
# options	 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	ADAPTIVE_GIANT		# Giant mutex is adaptive.

options         SC_PIXEL_MODE           # для графики
options         VESA                    # в консоли

device		apic			# I/O APIC

# Bus support.
# device		eisa
device		pci

# Floppy drives
# device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk		# ATA disk drives
# device		ataraid		# ATA RAID drives
device		atapicd		# ATAPI CDROM drives
# device		atapifd		# ATAPI floppy drives
# device		atapist		# ATAPI tape drives
# options 		ATA_STATIC_ID	# Static device numbering

# SCSI Controllers
# device		ahb		# EISA AHA1742 family
# device		ahc		# AHA2940 and onboard AIC7xxx devices
# options 		AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
# device		ahd		# AHA39320/29320 and onboard AIC79xx devices
# options 		AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~215k to driver.
# device		amd		# AMD 53C974 (Tekram DC-390(T))
# device		isp		# Qlogic family
# device 		ispfw		# Firmware for QLogic HBAs- normally a module
# device		mpt		# LSI-Logic MPT-Fusion
# device		ncr		# NCR/Symbios Logic
# device		sym		# NCR/Symbios Logic (newer chipsets + those of `ncr')
# device		trm		# Tekram DC395U/UW/F DC315U adapters

# device		adv		# Advansys SCSI adapters
# device		adw		# Advansys wide SCSI adapters
# device		aha		# Adaptec 154x SCSI adapters
# device		aic		# Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
# device		bt		# Buslogic/Mylex MultiMaster SCSI adapters

# device		ncv		# NCR 53C500
# device		nsp		# Workbit Ninja SCSI-3
# device		stg		# TMC 18C30/18C50

# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
# device		ch		# SCSI media changers
device		da		# Direct Access (disks)
# device		sa		# Sequential Access (tape etc)
# device		cd		# CD
# device		pass		# Passthrough device (direct SCSI access)
# device		ses		# SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
# device		amr		# AMI MegaRAID
# device		arcmsr		# Areca SATA II RAID
# device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
# device		ciss		# Compaq Smart RAID 5*
# device		dpt		# DPT Smartcache III, IV - See NOTES for options
# device		hptmv		# Highpoint RocketRAID 182x
# device		rr232x		# Highpoint RocketRAID 232x
# device		iir		# Intel Integrated RAID
# device		ips		# IBM (Adaptec) ServeRAID
# device		mly		# Mylex AcceleRAID/eXtremeRAID
# device		twa		# 3ware 9000 series PATA/SATA RAID

# RAID controllers
# device		aac		# Adaptec FSA RAID
# device		aacp		# SCSI passthrough for aac (requires CAM)
# device		ida		# Compaq Smart RAID
# device		mfi		# LSI MegaRAID SAS
# device		mlx		# Mylex DAC960 family
# device		pst		# Promise Supertrak SX6000
# device		twe		# 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		kbdmux		# keyboard multiplexer

device		vga		# VGA video card driver

device		splash		# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device		sc

# Enable this for the pcvt (VT220 compatible) console driver
# device		vt
# options 		XSERVER		# support for X server on a vt console
# options 		FAT_CURSOR	# start with block cursor

# device		agp		# support several AGP chipsets

# Power management support (see NOTES for more options)
# device		apm
# Add suspend/resume support for the i8254.
device		pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
# device		cbb		# cardbus (yenta) bridge
# device		pccard		# PC Card (16-bit) bus
# device		cardbus		# CardBus (32-bit) bus

# Serial (COM) ports
device		sio		# 8250, 16[45]50 based serial ports

# Parallel port
# device		ppc
# device		ppbus		# Parallel port bus (required)
# device		lpt		# Printer
# device		plip		# TCP/IP over parallel
# device		ppi		# Parallel port interface device
# device		vpo		# Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
# device		puc

# PCI Ethernet NICs.
# device		de		# DEC/Intel DC21x4x (``Tulip'')
# device		em		# Intel PRO/1000 adapter Gigabit Ethernet Card
# device		ixgb		# Intel PRO/10GbE Ethernet Card
# device		txp		# 3Com 3cR990 (``Typhoon'')
# device		vx		# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
# device		bce		# Broadcom BCM5706/BCM5708 Gigabit Ethernet
# device		bfe		# Broadcom BCM440x 10/100 Ethernet
# device		bge		# Broadcom BCM570xx Gigabit Ethernet
# device		dc		# DEC/Intel 21143 and various workalikes
# device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
# device		lge		# Level 1 LXT1001 gigabit Ethernet
# device		nge		# NatSemi DP83820 gigabit Ethernet
# device		nve		# nVidia nForce MCP on-board Ethernet Networking
# device		pcn		# AMD Am79C97x PCI 10/100(precedence over 'lnc')
# device		re		# RealTek 8139C+/8169/8169S/8110S
# device		rl		# RealTek 8129/8139
# device		sf		# Adaptec AIC-6915 (``Starfire'')
# device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
# device		sk		# SysKonnect SK-984x & SK-982x gigabit Ethernet
# device		ste		# Sundance ST201 (D-Link DFE-550TX)
# device		stge		# Sundance/Tamarack TC9021 gigabit Ethernet
# device		ti		# Alteon Networks Tigon I/II gigabit Ethernet
# device		tl		# Texas Instruments ThunderLAN
# device		tx		# SMC EtherPower II (83c170 ``EPIC'')
# device		vge		# VIA VT612x gigabit Ethernet
device		vr		# VIA Rhine, Rhine II
# device		wb		# Winbond W89C840F
# device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard NICs included.
# device		cs		# Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
# device		ed		# NE[12]000, SMC Ultra, 3c503, DS8390 cards
# device		ex		# Intel EtherExpress Pro/10 and Pro/10+
# device		ep		# Etherlink III based cards
# device		fe		# Fujitsu MB8696x based cards
# device		ie		# EtherExpress 8/16, 3C507, StarLAN 10 etc.
# device		lnc		# NE2100, NE32-VL Lance Ethernet cards
# device		sn		# SMC's 9000 series of Ethernet chips
# device		xe		# Xircom pccard Ethernet

# Wireless NIC cards
# device		wlan		# 802.11 support
# device		wlan_wep	# 802.11 WEP support
# device		wlan_ccmp	# 802.11 CCMP support
# device		wlan_tkip	# 802.11 TKIP support
# device		an		# Aironet 4500/4800 802.11 wireless NICs.
# device		ath		# Atheros pci/cardbus NIC's
# device		ath_hal		# Atheros HAL (Hardware Access Layer)
# device		ath_rate_sample	# SampleRate tx rate control for ath
# device		awi		# BayStack 660 and others
# device		ral		# Ralink Technology RT2500 wireless NICs.
# device		wi		# WaveLAN/Intersil/Symbol 802.11 wireless NICs.
# device		wl		# Older non 802.11 Wavelan wireless NIC.

# Pseudo devices.
device		loop		# Network loopback
device		random		# Entropy device
device		ether		# Ethernet support
# device		sl		# Kernel SLIP
# device		ppp		# Kernel PPP
# device		tun		# Packet tunnel.
device		pty		# Pseudo-ttys (telnet etc)
# device		md		# Memory "disks"
# device		gif		# IPv6 and IPv4 tunneling
# device		faith		# IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device		bpf		# Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
# device		ohci		# OHCI PCI->USB interface
device		ehci		# EHCI PCI->USB interface (USB 2.0)
device		usb		# USB Bus (required)
# device		udbp		# USB Double Bulk Pipe devices
device		ugen		# Generic
# device		uhid		# "Human Interface Devices"
# device		ukbd		# Keyboard
# device		ulpt		# Printer
# device		umass		# Disks/Mass storage - Requires scbus and da
# device	ums		# Mouse
# device		ural		# Ralink Technology RT2500USB wireless NICs
# device		urio		# Diamond Rio 500 MP3 player
# device		uscanner	# Scanners
# USB Ethernet, requires miibus
# device		aue		# ADMtek USB Ethernet
# device		axe		# ASIX Electronics USB Ethernet
# device		cdce		# Generic USB over Ethernet
# device		cue		# CATC USB Ethernet
# device		kue		# Kawasaki LSI USB Ethernet
# device		rue		# RealTek RTL8150 USB Ethernet

# FireWire support
# device		firewire	# FireWire bus code
# device		sbp		# SCSI over FireWire (Requires scbus and da)
# device		fwe		# Ethernet over FireWire (non-standard!)
однако что то нужное все таки заремил, потому что сейчас мобила определяется как ugen1
подскажите, пжлста

Re: мобильник в ядре

Добавлено: 2007-10-26 17:43:03
Alex Keda

Код: Выделить всё

# device      umass      # Disks/Mass storage - Requires scbus and da

Re: мобильник в ядре

Добавлено: 2007-10-26 18:16:44
catdog_
спасибо большое, заработало :-)

извиняюсь, но еще косячок нашел
k3b опять не видит привод

Код: Выделить всё

dmesg | grep PIO
acd0: DVDR <PIONEER DVD-RW DVR-212D/1.09> at ata1-master SATA150

Код: Выделить всё

cat /boot/loader.conf | grep atapi
atapicam_load="YES"

Код: Выделить всё

cat /etc/devfs.conf | grep perm
perm cd0   0666
perm pass0 0666
perm xpt0  0666/root/>

Код: Выделить всё

cdrecord scanbus
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Continuing in 5 seconds...
cdrecord: No CD/DVD-Recorder device specified.
Usage: cdrecord [options] track1...trackn

Use     cdrecord -help
to get a list of valid options.

Use     cdrecord blank=help
to get a list of valid blanking options.

Use     cdrecord dev=b,t,l driveropts=help -checkdrive
to get a list of drive specific options.

Use     cdrecord dev=help
to get a list of possible SCSI transport specifiers.

со стандартным ядром привод виделся в к3б

Re: мобильник в ядре

Добавлено: 2007-10-26 18:45:10
Alex Keda
ну так вернись на стандартное.

Re: мобильник в ядре

Добавлено: 2007-10-26 19:00:56
atckoe.zlo
device pass
вот это добавте в конфег ядра

Re: мобильник в ядре

Добавлено: 2007-10-26 19:21:46
catdog_
device pass не помогло
хотя добавилось вот это

Код: Выделить всё

dmesg | g pass
pass0 at ata1 bus 0 target 0 lun 0
pass0: <PIONEER DVD-RW  DVR-212D 1.09> Removable CD-ROM SCSI-0 device
pass0: 3.300MB/s transfers
ну и нафек его этот к3б все равно за полгода юзанья фряхи не записал ни одного диска :-)

Re: мобильник в ядре

Добавлено: 2007-10-26 19:52:09
Alex Keda
это не наш метод.

Re: мобильник в ядре

Добавлено: 2007-10-26 20:21:19
atckoe.zlo
catdog_ писал(а):device pass не помогло
хотя добавилось вот это

Код: Выделить всё

dmesg | g pass
pass0 at ata1 bus 0 target 0 lun 0
pass0: <PIONEER DVD-RW  DVR-212D 1.09> Removable CD-ROM SCSI-0 device
pass0: 3.300MB/s transfers
ну и нафек его этот к3б все равно за полгода юзанья фряхи не записал ни одного диска :-)
+еще добавте device cd

Re: мобильник в ядре

Добавлено: 2007-10-26 21:25:13
catdog_
ацкое зло, заработало:-) спс

Re: мобильник в ядре

Добавлено: 2007-10-27 1:27:19
catdog_
до кучи еще вопрос про мобильник
как я уже сказал он у меня определяется как da0
значит я его коннекчу к компу, пишу

Код: Выделить всё

mount_msdosfs /dev/da0 /flash
в ответ получаю

Код: Выделить всё

mount_msdosfs: /dev/da0: Invalid argument
ок. если написать

Код: Выделить всё

mount_msdosfs /dev/da0s1 /flash
в ответ получу

Код: Выделить всё

mount_msdosfs: /dev/da0s1: No such file or directory
как же его примаунтить?
а маунтится он нормально после этих 2 командвместе
т е сначала я делаю

Код: Выделить всё

mount_msdosfs /dev/da0 /flash

--> mount_msdosfs: /dev/da0: Invalid argument

mount_msdosfs /dev/da0s1 /flash
все, мобила примаунтилась
собственно вопрос: почему так?
в принципе это не такая уж проблема, однако как говорит lissyara это не наш метод

Код: Выделить всё

cat /etc/fstab
# Device                Mountpoint      FStype  Options         Dump    Pass#
/dev/ad0s3b             none            swap    sw              0       0
/dev/ad0s3a             /               ufs     rw              1       1
/dev/ad0s3e             /usr            ufs     rw              2       2
/dev/ad0s3d             /var            ufs     rw              2       2
/dev/ad0s4              /ufs            ufs     rw              2       2
/dev/acd0               /cdrom          cd9660  ro,noauto,-Ckoi8-r      0       0
/dev/ad0s1              /mnt/xp         ntfs    ro,-Ckoi8-r     0       0
/dev/ad0s2              /mnt/data       ntfs    ro,-Ckoi8-r     0       0
/dev/da0                /temp           msdosfs rw,noauto,-Lru_RU.KOI8-R     0       0 # вот приходится так извращаться
/dev/da0s1              /flash          msdosfs rw,noauto,-Lru_RU.KOI8-R     0       0
ну понятно из фстаба что в реале это выглядит

Код: Выделить всё

mount /temp
ошибка
mount /flash

Re: мобильник в ядре

Добавлено: 2007-10-27 8:40:46
Alex Keda

Код: Выделить всё

ls -al /dev/da0*

Re: мобильник в ядре

Добавлено: 2007-10-27 10:15:17
atckoe.zlo
Суйте мобильник в комп и смотрите вывод dmesg должно быть типа такого

Код: Выделить всё

da0 at umass-sim0 bus 0 target 0 lun 0
da0: <JetFlash TS2GJF2A/120 8.07> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1999MB (4095998 512 byte sectors: 255H 63S/T 254C)
GEOM_LABEL: Label for provider da0s1 is msdosfs/munity mara
это я подключил флешку, особое внимание обратите на строчку

Код: Выделить всё

 GEOM_LABEL: Label for provider da0s1 is msdosfs/munity mara
в ней указано какая инода была созздана для девайса, не факт что она будет одинакова для разных девайсов вот например я подключил ипод

Код: Выделить всё

da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Apple iPod 1.62> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 3872MB (1982464 2048 byte sectors: 255H 63S/T 123C)
GEOM_LABEL: Label for provider da0s2 is msdosfs/IPOD.
так что dmesg вам в руки и удачи :)

Re: мобильник в ядре

Добавлено: 2007-10-28 6:47:08
catdog_
когда втыкаю мобилу

Код: Выделить всё

ugen1: Sony Ericsson Sony Ericsson Z710, rev 2.00/0.00, addr 2
ugen1: at uhub1 port 2 (addr 2) disconnected
All threads purged from ugen1.7
All threads purged from ugen1.6
All threads purged from ugen1.4
All threads purged from ugen1.3
All threads purged from ugen1.2
All threads purged from ugen1.1
All threads purged from ugen1
ugen1: detached
umass0: Sony Ericsson Memory Stick, rev 2.00/0.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
lissyara,

Код: Выделить всё

/root/> ls -al /dev/da0*
crw-r-----  1 root  operator    0, 105 27 окт 10:56 /dev/da0
/root/>  

Re: мобильник в ядре

Добавлено: 2007-10-28 8:42:03
Alex Keda
у меня такая же херня с фороаппаратом.
как обойти - не знаю - но ввиду того что мне надо тока читать - делаю образ и цепляю файл как диск.