proftpd конфиг файл
Добавлено: 2008-03-03 10:08:17
народ, подскажите где ошибка
есть конфигурационный файл:
но анонимуса не пускает с такими настройками, где рыть?
есть конфигурационный файл:
Код: Выделить всё
#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes reload proftpd after modifications.
#
# Includes DSO modules
Include /etc/proftpd.d/*.conf
# This is the directory where DSO modules resides
ModulePath /usr/lib/proftpd
# Allow only user root to load and unload modules, but allow everyone
# to see which modules have been loade
ModuleControlsACLs insmod,rmmod allow user root
ModuleControlsACLs lsmod allow user *
ServerName "ProFTPD Default Installation"
ServerType inetd
DeferWelcome off
MultilineRFC2228 on
DefaultServer on
ShowSymlinks on
TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200
DisplayLogin welcome.msg
DisplayChdir .message
ListOptions "-l"
DenyFilter \*.*/
UseIPv6 Off
# Allow FTP resuming.
# Remember to set to off if you have an incoming ftp for upload.
AllowStoreRestart on
# Port 21 is the standard FTP port.
Port 21
# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
#PassivePorts 49152 65534
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30
# Set the user and group under which the server will run.
User ftp
Group ftp
# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# To cause every FTP user to be "jailed" (chrooted) into their home
# directory, uncomment this line.
DefaultRoot ~
# Normally, we want files to be overwriteable.
AllowOverwrite on
# Uncomment this if you are using NIS or LDAP to retrieve passwords:
PersistentPasswd off
# Be warned: use of this directive impacts CPU average load!
#
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#UseSendFile off
TransferLog /var/log/proftpd/proftpd.log
SystemLog /var/log/proftpd/proftpd.log
<IfModule mod_tls.c>
TLSEngine off
</IfModule>
<IfModule mod_quota.c>
QuotaEngine on
</IfModule>
<IfModule mod_ratio.c>
Ratios on
</IfModule>
# Delay engine reduces impact of the so-called Timing Attack described in
# http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>
<IfModule mod_ctrls.c>
ControlsEngine on
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>
<IfModule mod_ctrls_admin.c>
AdminControlsEngine on
</IfModule>
# Bar use of SITE CHMOD by default
<Limit SITE_CHMOD>
DenyAll
</Limit>
<Directory ~>
AllowOverwrite on
<Limit WRITE>
AllowAll
</Limit>
<Limit READ>
AllowAll
</Limit>
</Directory>
<Anonymous /efr/ftp>
User ftp
Group ftp
UserAlias anonymous ftp
MaxClients 20 "sorry, max %m users - try again leter"
<Limit WRITE>
DenyAll
</Limit>
<Directory PUB/MEDIA>
<Limit LIST>
DenyAll
</Limit>
<Limit CDUP>
DenyAll
</Limit>
</Directory>
<Directory UPLOAD/*>
AllowOverwrite on
Umask 000
<Limit READ>
AllowAll
</Limit>
<Limit STOR MKD RMD>
AllowAll
</Limit>
<Limit WRITE>
AllowAll
</Limit>
</Directory>
</Anonymous>