MPD4 , настройка PPPOE
Добавлено: 2008-12-08 9:20:37
Проблема с настройкой pppoe через adsl модем (bridge)
В логе пишет
mpd.conf
mpd.links
Пытался настроить через pppd , но в сети (модем находится в локальной сети) есть еще одно pppoe устройство, и pppd на него почему то по умолчанию коннектит. Есть какая нибудь возможность заблокировать второе устройство, например по mac?
В логе пишет
Код: Выделить всё
Dec 8 13:09:26 hosting mpd: Multi-link PPP daemon for FreeBSD
Dec 8 13:09:26 hosting mpd:
Dec 8 13:09:26 hosting mpd: process 21025 started, version 4.4 (root@freebsd.org 10:46 11-Jan-2008)
Dec 8 13:09:26 hosting mpd: Label 'startup' not found
Dec 8 13:09:26 hosting mpd: [adsl] PPPoE: Skipping link adsl with undefined interface or session
Dec 8 13:09:26 hosting mpd: [adsl] using interface ng0
Dec 8 13:09:26 hosting mpd: [adsl] link: OPEN event
Dec 8 13:09:26 hosting mpd: [adsl] LCP: Open event
Dec 8 13:09:26 hosting mpd: [adsl] LCP: state change Initial --> Starting
Dec 8 13:09:26 hosting mpd: [adsl] LCP: LayerStart
Dec 8 13:09:26 hosting mpd: [adsl] PPPoE: Skipping link adsl with undefined interface or session
Dec 8 13:09:26 hosting mpd: [adsl] PPPoE node for link is not initialized
Dec 8 13:09:26 hosting mpd: [adsl] link: DOWN event
Dec 8 13:09:26 hosting mpd: [adsl] LCP: Close event
Dec 8 13:09:26 hosting mpd: [adsl] LCP: state change Starting --> Initial
Dec 8 13:09:26 hosting mpd: [adsl] LCP: LayerFinish
Dec 8 13:09:26 hosting mpd: [adsl] LCP: Down event
...Код: Выделить всё
default:
load adsl
adsl:
new -i ng0 adsl adsl
#set iface addrs 92.124.9*.** 213.228.11*.**
set iface route default
set iface disable on-demand
set iface idle 0
#set iface enable tcpmssfix
set ipcp yes vjcomp
set ipcp ranges 0.0.0.0/0 0.0.0.0/0
set bundle disable multilink
#set bundle authname sl******
set link no acfcomp protocomp
set link disable pap chap
set link accept chap
set link mtu 1464
set link keep-alive 10 60
open
Код: Выделить всё
adsl:
#set link type pppoe
set phys type pppoe
set pppoe iface rl1
set pppoe service "*"
#set pppoe self 10.0.7.7
#set pppoe peer 10.0.7.2
set pppoe disable incoming
set pppoe enable originate
