forum.lissyara.su

Код: Выделить всё

# /usr/local/sbin/mpd5
Multi-link PPP daemon for FreeBSD

process 1763 started, version 5.3 (root@ 00:44 28-Jan-2010)
CONSOLE: listening on 127.0.0.1 5005
web: listening on 0.0.0.0 5006
PPTP: waiting for connection on 0.0.0.0 1723

[L] [L-1] Accepting PPTP connection
[L-1] Link: OPEN event
[L-1] LCP: Open event
[L-1] LCP: state change Initial --> Starting
[L-1] LCP: LayerStart
[L-1] PPTP: attaching to peer's outgoing call
[L-1] Link: UP event
[L-1] LCP: Up event
[L-1] LCP: state change Starting --> Req-Sent
[L-1] LCP: SendConfigReq #1
[L-1]   ACFCOMP
[L-1]   PROTOCOMP
[L-1]   MRU 1500
[L-1]   MAGICNUM ca9dfcf7
[L-1]   AUTHPROTO CHAP MSOFTv2
[L-1]   MP MRRU 2048
[L-1]   MP SHORTSEQ
[L-1]   ENDPOINTDISC [802.1] 00 1b fc 35 6b 6d
[L-1] PPTP call terminated
[L-1] Link: DOWN event
[L-1] LCP: Close event
[L-1] LCP: state change Req-Sent --> Closing
[L-1] LCP: SendTerminateReq #2
[L-1] LCP: Down event
[L-1] LCP: LayerFinish
[L-1] LCP: state change Closing --> Initial
[L-1] Link: SHUTDOWN event
[L-1] Link: Shutdown

Код: Выделить всё

startup:
        set user prox2 oe2jb8v5
        set console self 127.0.0.1 5005
        set console open
        set web self 0.0.0.0 5006
        set web open


default:
        load pptp_server


pptp_server:
# Define dynamic IP address pool.
        set ippool add pool1 192.168.2.200 192.168.2.250

# Create clonable bundle template named B
        create bundle template B
        set iface enable proxy-arp
        set iface idle 1800
        set iface enable tcpmssfix
        set ipcp yes vjcomp
# Specify IP address pool for dynamic assigment.
        set ipcp ranges 192.168.2.20/24 ippool pool1
        set ipcp dns 192.168.2.1
        set ipcp nbns 192.168.2.1
# The five lines below enable Microsoft Point-to-Point encryption
# (MPPE) using the ng_mppc(8) netgraph node type.
        set bundle enable compression
        set ccp yes mppc
        set mppc yes e40
        set mppc yes e128
        set mppc yes stateless

# Create clonable link template named L
        create link template L pptp
# Set bundle template to use
        set link action bundle B
# Multilink adds some overhead, but gives full 1500 MTU.
        set link enable multilink
        set link yes acfcomp protocomp
        set link no pap chap
        set link enable chap
# We can use use RADIUS authentication/accounting by including
# another config section with label 'radius'.
#       load radius
        set link keep-alive 10 60
# We reducing link mtu to avoid GRE packet fragmentation.
        set link mtu 1460
# Configure PPTP
        set pptp self 0.0.0.0
# Allow to accept calls
        set link enable incoming

Код: Выделить всё

set pptp self 192.168.xxx.xxx

Код: Выделить всё

sockstat |grep mpd