forum.lissyara.su

Добавлено: **2009-07-06 7:34:26**

Имеется Cisco 2811 и 2 adsl канала, подключенных к FastEthernet0/0 и FastEthernet0/2/0 (vlan12).
Задача поднять 4 pppoe, причем так, чтобы 2 pppoe (Dialer3 и Dialer4) шли через туннель FastEthernet0/0, а остальные 2 pppoe (Dialer1 и Dialer2) через vlan12.
Проблема в том, что все pppoe поднимаются через один туннель (либо FastEthernet0/0, либо vlan12). Подскажите, что надо поправить, чтобы привязать pppoe к конкретному интерфейсу?

Код: Выделить всё

%No active L2F tunnels

%No active L2TP tunnels

%No active PPTP tunnels

PPPoE Tunnel and Session Information Total tunnels 1 sessions 4

PPPoE Session Information
Uniq ID  PPPoE  RemMAC          Port                  Source   VA         State
           SID  LocMAC                                         VA-st
    N/A  15314  0022.0d97.b41b  Fa0/0                 Di4      Vi2        UP
                0019.3008.b8a8                                 UP
    N/A  15315  0022.0d97.b41b  Fa0/0                 Di3      Vi3        UP
                0019.3008.b8a8                                 UP
    N/A  15338  0022.0d97.b41b  Fa0/0                 Di2      Vi4        UP
                0019.3008.b8a8                                 UP
    N/A  15339  0022.0d97.b41b  Fa0/0                 Di1      Vi5        UP
                0019.3008.b8a8                                 UP

Код: Выделить всё

interface FastEthernet0/0
 ip address 192.168.3.2 255.255.255.0
 ip nat outside
 ip virtual-reassembly
 duplex auto
 speed auto
 pppoe enable group global
 pppoe-client dial-pool-number 4
 pppoe-client dial-pool-number 3
!
interface FastEthernet0/1
 description LAN$FW_INSIDE$
 ip address 10.10.10.100 255.255.255.0
 ip access-group 103 in
 ip nat inside
 ip virtual-reassembly
 duplex auto
 speed auto
!
interface FastEthernet0/2/0
 switchport access vlan 12
!
interface FastEthernet0/2/1
!
interface FastEthernet0/2/2
!
interface FastEthernet0/2/3
!
interface Vlan1
 no ip address
!
interface Vlan2
 no ip address
!
interface Vlan12
 ip address 192.168.2.2 255.255.255.0
 ip nat outside
 ip virtual-reassembly
 pppoe enable group global
 pppoe-client dial-pool-number 2
 pppoe-client dial-pool-number 1
!
interface Vlan13
 no ip address
!
interface Dialer1
 description $FW_OUTSIDE$
 mtu 1460
 ip address negotiated
 ip access-group 104 in
 ip nat outside
 ip inspect SDM_LOW out
 ip virtual-reassembly
 encapsulation ppp
 ip tcp adjust-mss 1420
 dialer pool 1
 no cdp enable
 ppp authentication chap callin
 ppp chap hostname ********
 ppp chap password ********
!
interface Dialer2
 description $FW_OUTSIDE$
 mtu 1460
 ip address negotiated
 ip access-group 105 in
 ip nat outside
 ip inspect SDM_LOW out
 ip virtual-reassembly
 encapsulation ppp
 ip tcp adjust-mss 1420
 dialer pool 2
 no cdp enable
 ppp authentication chap callin
 ppp chap hostname ********
 ppp chap password ********
!
interface Dialer3
 description $FW_OUTSIDE$
 mtu 1460
 ip address negotiated
 ip access-group 104 in
 ip nat outside
 ip inspect SDM_LOW out
 ip virtual-reassembly
 encapsulation ppp
 ip tcp adjust-mss 1420
 dialer pool 3
 no cdp enable
 ppp authentication chap callin
 ppp chap hostname ********
 ppp chap password ********
!
interface Dialer4
 description $FW_OUTSIDE$
 mtu 1460
 ip address negotiated
 ip access-group 105 in
 ip nat outside
 ip inspect SDM_LOW out
 ip virtual-reassembly
 encapsulation ppp
 ip tcp adjust-mss 1420
 dialer pool 4
 no cdp enable
 ppp authentication chap callin
 ppp chap hostname ********
 ppp chap password ********
!

Добавлено: **2009-07-06 7:40:04**

Код: Выделить всё

Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(25), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Tue 21-Apr-09 11:27 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

forum.lissyara.su

Cisco 2811 и 4 pppoe через 2 туннеля

Cisco 2811 и 4 pppoe через 2 туннеля

Re: Cisco 2811 и 4 pppoe через 2 туннеля