RAID1
Добавлено: 2008-11-24 12:00:23
Подскажите пожалуйста, проверенный контроллер RAID под RAID1 винты SATA2, который работает в Fbsd.
Если проблема не решается сама, значит она неразрешима
https://forum.lissyara.su/
Код: Выделить всё
Checking status of Areca RAID controllers:
Controller :
--- /var/log/arcmsr_raid_.yesterday Sun Nov 23 03:28:52 2008
+++ /var/log/arcmsr_raid_.today Mon Nov 24 03:21:01 2008
@@ -1,119 +1,119 @@
The System Information
===========================================
Main Processor : 500MHz
CPU ICache Size : 32KB
CPU DCache Size : 32KB
System Memory : 256MB/333MHz
Firmware Version : V1.43 2007-4-17
BOOT ROM Version : V1.43 2007-4-17
Serial Number : Y741CAAAAR106004
Controller Name : ARC-1110
===========================================
GuiErrMsg<0x00>: Success.
Num Name Disks TotalCap FreeCap DiskChannels State
===============================================================================
1 Raid Set # 00 4 2000.0GB 0.0GB 1324 Normal
===============================================================================
GuiErrMsg<0x00>: Success.
# Name Raid# Level Capacity Ch/Id/Lun State
===============================================================================
1 ARC-1110-VOL#00 1 Raid0+1 1000.0GB 00/00/00 Normal
===============================================================================
GuiErrMsg<0x00>: Success.
Ch ModelName Serial# FirmRev Capacity State
===============================================================================
1 WDC WD5001ABYS- WD-WCAS84907409 59.01D01 500.1GB RaidSet Member(1)
2 WDC WD5001ABYS- WD-WCAS84875247 59.01D01 500.1GB RaidSet Member(1)
3 WDC WD5001ABYS- WD-WCAS84891490 59.01D01 500.1GB RaidSet Member(1)
4 WDC WD5001ABYS- WD-WCAS84972232 59.01D01 500.1GB RaidSet Member(1)
===============================================================================
GuiErrMsg<0x00>: Success.
SMART data for disk 1
# Attribute Items Flag Value Thres State
===============================================================================
1 Raw Read Error Rate 0x0f 200 51 OK
3 Spin Up Time 0x03 176 21 OK
4 Start/Stop Count 0x32 100 0 OK
5 Reallocated Sector Count 0x33 200 140 OK
7 Seek Error Rate 0x0e 200 0 OK
9 Power-on Hours Count 0x32 92 0 OK
10 Spin Retry Count 0x12 100 0 OK
12 Device Power Cycle Count 0x32 100 0 OK
192 Power-off Retract Count 0x32 200 0 OK
193 Load Cycle Count 0x32 200 0 OK
-194 Temperature 0x22 126 0 OK
+194 Temperature 0x22 125 0 OK
196 Reallocation Event Count 0x32 200 0 OK
197 Current Pending Sector Count 0x12 200 0 OK
198 Off-line Scan Uncorrectable Sector Count 0x10 100 0 OK
199 Ultra DMA CRC Error Count 0x3e 200 0 OK
===============================================================================
GuiErrMsg<0x00>: Success.
SMART data for disk 2
# Attribute Items Flag Value Thres State
===============================================================================
1 Raw Read Error Rate 0x0f 200 51 OK
3 Spin Up Time 0x03 179 21 OK
4 Start/Stop Count 0x32 100 0 OK
5 Reallocated Sector Count 0x33 200 140 OK
7 Seek Error Rate 0x0e 200 0 OK
9 Power-on Hours Count 0x32 92 0 OK
10 Spin Retry Count 0x12 100 0 OK
12 Device Power Cycle Count 0x32 100 0 OK
192 Power-off Retract Count 0x32 188 0 OK
193 Load Cycle Count 0x32 197 0 OK
-194 Temperature 0x22 127 0 OK
+194 Temperature 0x22 126 0 OK
196 Reallocation Event Count 0x32 200 0 OK
197 Current Pending Sector Count 0x12 200 0 OK
198 Off-line Scan Uncorrectable Sector Count 0x10 100 0 OK
199 Ultra DMA CRC Error Count 0x3e 200 0 OK
===============================================================================
GuiErrMsg<0x00>: Success.
SMART data for disk 3
# Attribute Items Flag Value Thres State
===============================================================================
1 Raw Read Error Rate 0x0f 200 51 OK
3 Spin Up Time 0x03 181 21 OK
4 Start/Stop Count 0x32 100 0 OK
5 Reallocated Sector Count 0x33 200 140 OK
7 Seek Error Rate 0x0e 200 0 OK
9 Power-on Hours Count 0x32 92 0 OK
10 Spin Retry Count 0x12 100 0 OK
12 Device Power Cycle Count 0x32 100 0 OK
192 Power-off Retract Count 0x32 200 0 OK
193 Load Cycle Count 0x32 200 0 OK
-194 Temperature 0x22 126 0 OK
+194 Temperature 0x22 125 0 OK
196 Reallocation Event Count 0x32 200 0 OK
197 Current Pending Sector Count 0x12 200 0 OK
198 Off-line Scan Uncorrectable Sector Count 0x10 100 0 OK
199 Ultra DMA CRC Error Count 0x3e 200 0 OK
===============================================================================
GuiErrMsg<0x00>: Success.
SMART data for disk 4
# Attribute Items Flag Value Thres State
===============================================================================
1 Raw Read Error Rate 0x0f 200 51 OK
3 Spin Up Time 0x03 176 21 OK
4 Start/Stop Count 0x32 100 0 OK
5 Reallocated Sector Count 0x33 196 140 OK
7 Seek Error Rate 0x0e 200 0 OK
9 Power-on Hours Count 0x32 93 0 OK
10 Spin Retry Count 0x12 100 0 OK
12 Device Power Cycle Count 0x32 100 0 OK
192 Power-off Retract Count 0x32 197 0 OK
193 Load Cycle Count 0x32 200 0 OK
-194 Temperature 0x22 128 0 OK
+194 Temperature 0x22 127 0 OK
196 Reallocation Event Count 0x32 190 0 OK
197 Current Pending Sector Count 0x12 200 0 OK
198 Off-line Scan Uncorrectable Sector Count 0x10 200 0 OK
199 Ultra DMA CRC Error Count 0x3e 200 0 OK
===============================================================================
GuiErrMsg<0x00>: Success.
The Hardware Monitor Information
===========================================
-Fan#1 Speed (RPM) : 3564
+Fan#1 Speed (RPM) : 3366
HDD #1 Temp. : 0
HDD #2 Temp. : 0
HDD #3 Temp. : 0
HDD #4 Temp. : 0
===========================================
GuiErrMsg<0x00>: Success.
Logs (most recent first):
No new alarms.