Страница 2 из 2

Re: мать SUPER 370DLE

Добавлено: 2009-01-29 14:49:43
manefesto
спешиал фо ю.
Или для тех кто не хочет освоить поиск

Код: Выделить всё

man natd

Re: мать SUPER 370DLE

Добавлено: 2009-01-31 16:29:47
Electronik
пытаюсь пересобирать ядро по SSH, сразу же зависает причём виснет, намертво, блин может чего не так настроил, какие нибудь настройки SSH есть из-за чего могло бы виснуть.
конечно как вариант ещё железо может.

dmesg

Код: Выделить всё

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
    root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (732.99-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268369920 (255 MB)
avail memory = 248623104 (237 MB)
ACPI APIC Table: <RCC    RCCNILE >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
acpi0: <RCC RCCNILE> on motherboard
ACPI Warning (dswload-0794): Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [IO__] had invalid type (Integer) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [ICNT] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [ACPI] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [OSB4] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [CMOS] had invalid type (Integer) for Scope operator, changed to (Scope) [20070320]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, ff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 0xf8000000-0xfbffffff irq 22 at device 4.0 on pci0
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd800-0xd83f mem 0xfeaee000-0xfeaeefff,0xfe900000-0xfe9fffff irq 31 at device 6.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:30:48:21:23:91
fxp0: [ITHREAD]
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfeaef000-0xfeaeffff irq 10 at device 15.2 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 4 ports with 4 removable, self powered
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA (mono) <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3b0-0x3cf iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
hptrr: no controller detected.
ad0: 38204MB <SAMSUNG SP0411N TW100-13> at ata0-master UDMA33
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
Invalid time in clock: check and reset the date!
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted

Re: мать SUPER 370DLE

Добавлено: 2009-02-04 0:13:15
Electronik
manefesto писал(а):спешиал фо ю.
Или для тех кто не хочет освоить поиск

Код: Выделить всё

man natd
спасибо разобрался))

может подскажите что означает сообщение в в первой консоли

Код: Выделить всё

read_udma error ICMP...../code]
я так понимаю что это ошибка чтения при обращении к винту, просто выскакивает эта мессага и вся система сразу виснет, выскакивает обычо после 
[code]cd /usr/src
make update

Был глюк что при установки фряхи написало panic kernel, загрузился в режиме ACPI disabled, и загрузка прошла нормально. Может кто подскажет в чём примерно проблема, в винте или скорее всего в памяти.

Re: мать SUPER 370DLE

Добавлено: 2010-12-09 16:02:37
VaLoR
точно такая же мамка досталась по наследству, щас на ней живет FreeBSD 7.3, но живет не очень хорошо :)
у меня сложилось ощущение, шо не все в порядке у нее с IDE-винтами - и в процессе инстала оси, и при сборке некоторых портов вылетала ошибка input/output error с указанием на разные разделы диска. Если пытаюсь запустить самбу - ошибку получаю немедленно, несколько секунд завис, потом расчехляется. Винты пробовал разные, все заведомо рабочие. Т.е. - либо есть сложности с работой IDE-винтов большого объема (> 100 Gb), либо у меня просто глючный экземпляр :(
В ближайшие дни попробую переехать на SCSI-адаптер (есть несколько старых сказёвых винтов), в перспективе подумываю об установке адаптера SATA, для файлового хранилища.

Re: мать SUPER 370DLE

Добавлено: 2010-12-09 18:00:31
FreeBSP
Alex Keda писал(а):правда rc.d скриптов нету - всё руками.
зато не забываешь как оно работает =)
интересно, а портировать на 4-ку rc.d механизм шибко сложно?....
и где мона почитать про запуск-загрузку фри, окромя как в исходниках?

по поводу проблемы - поменяй винт и шлейф. нередко a шлейфе проблема может быть, особенно в ИДЕ - там легко разбалтываются гарпуны и уже не обеспечивают необходимого контакта

Re: мать SUPER 370DLE

Добавлено: 2010-12-09 21:45:58
Alex Keda
он там был...
в зачаточном состоянии...
rc.subr из портов инсталлился в /usr/local/etc....
помню, уже году в 2007-2008 делал симлинк с /usr/local/etc/rc.subr на /etc/rc.subr...
бо новый софт его там уже искал...

Re: мать SUPER 370DLE

Добавлено: 2010-12-12 16:14:42
Electronik
А Вы дополнительное питание подключаете? Там дополнительный 5 или 6 пиновый разъём.