Код: Выделить всё
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RELEASE #0: Thu Jan 1 14:37:25 UTC 2009
root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz (1866.74-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2147123200 (2047 MB)
avail memory = 2091487232 (1994 MB)
ACPI APIC Table: <061908 APIC0925>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.4> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <061908 RSDT0925> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of ffee0000, 20000 (3) failed
acpi0: reservation of fed4b000, 40000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x19> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd800-0xd8ff mem 0xd0000000-0xdfffffff,0xfdef0000-0xfdefffff irq 16 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 5513 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffe0-0xffef at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
ohci0: <SiS 5571 USB controller> mem 0xfddff000-0xfddfffff irq 20 at device 3.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 4 ports with 4 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xfddfe000-0xfddfefff irq 21 at device 3.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 4 ports with 4 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfddfd000-0xfddfdfff irq 22 at device 3.3 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 8 ports with 8 removable, self powered
ugen0: <SuYin USB2.0 UVC 1.3M WebCam, class 239/2, rev 2.00/3.22, addr 2> on uhub2
umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/16.10, addr 3> on uhub2
pci0: <network, ethernet> at device 4.0 (no driver attached)
atapci1: <SiS 5513 WDMA2 controller> port 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb80f,0xb400-0xb47f irq 17 at device 5.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 5424/2424> mem 0xfdff0000-0xfdffffff irq 16 at device 0.0 on pci2
ath0: [ITHREAD]
ath0: unable to attach hardware; HAL status 13
device_attach: ath0 attach returned 6
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <multimedia> at device 15.0 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130e2b06000e2b
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI Exception (exoparg2-0559): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFB) is beyond end of object [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU2._PSS] (Node 0xc5284da0), AE_AML_PACKAGE_LIMIT
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130e2b06000e2b
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <A4Tech PS/2+USB Mouse, class 0/0, rev 1.10/0.02, addr 2> on uhub1
ums0: 8 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <MATSHITADVD-RAM UJ870QJ/1.00> at ata0-master PIO4
ad4: 152627MB <Hitachi HTS542516K9SA00 BBCOC31P> at ata2-master WDMA2
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic- xD/SDMMC/MS/Pro 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
GEOM_LABEL: Label for provider ad4s1 is ntfs/xp.
GEOM_LABEL: Label for provider ad4s5 is ntfs/doc.
Trying to mount root from ufs:/dev/ad4s3a
umass1: <EGOMAN MTP Player, class 0/0, rev 2.00/0.02, addr 4> on uhub2
da1 at umass-sim1 bus 1 target 0 lun 0
da1: < Audio Player \\000\\000\\000?> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: 495MB (1015296 512 byte sectors: 64H 32S/T 495C)
umass1: at uhub2 port 3 (addr 4) disconnected
(da1:umass-sim1:1:0:0): lost device
(da1:umass-sim1:1:0:0): removing device entry
umass1: detached
umass1: <EGOMAN MTP Player, class 0/0, rev 2.00/0.02, addr 4> on uhub2
da1 at umass-sim1 bus 1 target 0 lun 0
da1: < Audio Player \\000\\000\\000?> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: 495MB (1015296 512 byte sectors: 64H 32S/T 495C)
umass1: at uhub2 port 3 (addr 4) disconnected
(da1:umass-sim1:1:0:0): lost device
umass1: detached
umass1: <EGOMAN MTP Player, class 0/0, rev 2.00/0.02, addr 4> on uhub2
da2 at umass-sim1 bus 1 target 0 lun 0
da2: < Audio Player \\000\\000\\000?> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: 495MB (1015296 512 byte sectors: 64H 32S/T 495C)