smartmontools глючит?
Добавлено: 2010-02-02 21:43:43
Как понимать?
madcat# pkg_info |grep smart
smartmontools-5.38_8 S.M.A.R.T. disk monitoring tools
Система стабильно работает...
Код: Выделить всё
t# smartctl -a /dev/ad0
smartctl version 5.38 [i386-portbld-freebsd7.2] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model: ST380011A
Serial Number: 5JVA5ETV
Firmware Version: 3.06
User Capacity: 80 026 361 856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Tue Feb 2 21:38:55 2010 VOLT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 58) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 056 052 006 Pre-fail Always - 231953589
3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 17
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1
7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 493070938
9 Power_On_Hours 0x0032 069 069 000 Old_age Always - 27539
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2334
194 Temperature_Celsius 0x0022 039 056 000 Old_age Always - 39
195 Hardware_ECC_Recovered 0x001a 056 052 000 Old_age Always - 231953589
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 3
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 a0 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x000000a0 = 160
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 40 61 00 00 e0 00 00:06:59.085 READ DMA
c6 00 10 00 00 00 e0 00 00:06:59.085 SET MULTIPLE MODE
91 00 3f 00 00 00 ef 00 00:06:59.077 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 00 00 00 00 00 e0 00 00:06:58.676 RECALIBRATE [OBS-4]
00 00 40 00 00 00 00 04 00:06:57.551 NOP [Abort queued commands]
Error 2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 a0 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x000000a0 = 160
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 40 61 00 00 e0 00 00:06:59.085 READ DMA
c6 00 10 00 00 00 e0 00 00:06:59.085 SET MULTIPLE MODE
91 00 3f 00 00 00 ef 00 00:06:59.077 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 00 00 00 00 00 e0 00 00:06:58.676 RECALIBRATE [OBS-4]
00 00 40 00 00 00 00 04 00:06:57.551 NOP [Abort queued commands]
Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 a0 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x000000a0 = 160
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 40 61 00 00 e0 00 00:06:57.508 READ DMA
ca 00 19 e7 f0 87 e0 00 00:06:57.504 WRITE DMA
ca 00 19 a7 f0 87 e0 00 00:06:57.499 WRITE DMA
ca 00 19 e7 71 87 e0 00 00:06:57.488 WRITE DMA
ca 00 19 67 71 87 e0 00 00:06:57.551 WRITE DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 27516 -
# 2 Short offline Completed without error 00% 27493 -
# 3 Short offline Completed without error 00% 27493 -
# 4 Extended offline Completed without error 00% 27474 -
# 5 Short offline Completed without error 00% 27473 -
# 6 Short offline Completed without error 00% 27449 -
# 7 Short offline Completed without error 00% 27426 -
# 8 Short offline Completed without error 00% 27403 -
# 9 Short offline Completed without error 00% 27381 -
#10 Short offline Completed without error 00% 27358 -
#11 Short offline Completed without error 00% 27335 -
#12 Extended offline Completed without error 00% 27313 -
#13 Short offline Completed without error 00% 27312 -
#14 Short offline Completed without error 00% 27288 -
#15 Short offline Completed without error 00% 27264 -
#16 Short offline Completed without error 00% 27240 -
#17 Short offline Completed without error 00% 27217 -
#18 Short offline Completed without error 00% 27193 -
#19 Short offline Completed without error 00% 27169 -
#20 Extended offline Completed without error 00% 27147 -
#21 Short offline Completed without error 00% 27146 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartmontools-5.38_8 S.M.A.R.T. disk monitoring tools
Система стабильно работает...
Код: Выделить всё
# uname -a
FreeBSD madcat.homenet 8.0-RELEASE-p2 FreeBSD 8.0-RELEASE-p2 #0: Fri Jan 29 00:49:07 VOLT 2010 Raven2000@madcat.homenet:/usr/obj/usr/src/sys/GENERIC i386