forum.lissyara.su

Добавлено: **2010-04-03 14:21:29**

Доброго времени суток

в общем проблема такова: Мать S5000PSL, висят 4 сасовских винта, загоняем их утилой в RAID 10, но когда ставлю правильную ось она видит 4 винта с меткой da раньше sa называла, как я понимаю контроллер она понимает да вот не до конца ( я на фре не так давно, может где ступил или ещё чего, помогите пожалуйста). Ставил FreeBSD 7.2 amd64

Заранее благодарен

Добавлено: **2010-04-03 14:30:48**

что-то
где-то
как-то

по больше конкретики

Добавлено: **2010-04-03 16:43:02**

назовите конкретную модель аппаратного RAID

Добавлено: **2010-04-03 18:45:56**

Если юзается встроенный контроллер то почитав вот это:

Видно что есть варианты:

Код: Выделить всё

Intel® Server Board S5000PSL (ROMBR) 
Server RAID 
(LSI* 1068x8-Port SAS controller with optional upgrade to intelligent hardware RAID 0, 1, 5, 10, 50 using Intel® I/O processor 333 MHz) 
Intel® Server Board S5000PSL (SASR) 
(4-Port LSI* 1064e SAS controller with Intel® Embedded RAID Technology II providing RAID 0, 1, 10 and optional AXXRAKSW5 for RAID 5)

Ну что могу сказать. это не совсем полноценный железезный рэйд.
Либо покупайте нормальный контроллер. Либо делайте средствами операционки.

Добавлено: **2010-04-04 0:36:29**

Intel® Server Board S5000PSL (SASR)
(4-Port LSI* 1064e SAS controller with Intel® Embedded RAID Technology II providing RAID 0, 1, 10 and optional AXXRAKSW5 for RAID 5)

На машине именно этот контроллер

Может какую какую инфу дать ?
Контроллер фря видит как mpt, нашёл mptutil. она вроде как умеет общаться с контроллером)
до работы доберусь, по мучаю её или она меня

Добавлено: **2010-04-04 11:40:32**

зачем было давать линк на p4, если и в базовой поставке фри есть утилита mptutil

Добавлено: **2010-04-04 13:10:59**

В 7.2 она не идёт в комплекте, только в 7.3 её включили

Добавлено: **2010-04-04 14:48:16**

dmesg

Код: Выделить всё

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Fri May  1 07:18:07 UTC 2009
    root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz (2506.23-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x40ce3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,<b19>,XSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 4
usable memory = 17160929280 (16365 MB)
avail memory  = 16586596352 (15818 MB)
ACPI APIC Table: <INTEL  S5000PSL>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL S5000PSL> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xca2,0xca3,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 1.0 on pci2
pci4: <ACPI PCI bus> on pcib4
mpt0: <LSILogic SAS/SATA Adapter> port 0x3000-0x30ff mem 0xb8910000-0xb8913fff,0xb8900000-0xb890ffff irq 17 at device 0.0 on pci4
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.14.0
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2
pci5: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x2020-0x203f mem 0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at device 0.0 on pci5
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:15:17:98:fe:14
em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x2000-0x201f mem 0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at device 0.1 on pci5
em1: Using MSI interrupt
em1: [FILTER]
em1: Ethernet address: 00:15:17:98:fe:15
pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci6: <ACPI PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at device 3.0 on pci0
pci7: <PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci10: <ACPI PCI bus> on pcib10
pcib11: <PCI-PCI bridge> at device 7.0 on pci0
pci11: <PCI bus> on pcib11
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib12: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci12: <ACPI PCI bus> on pcib12
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x40a0-0x40bf irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x4080-0x409f irq 22 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x4060-0x407f irq 23 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x4040-0x405f irq 22 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xb8c00400-0xb8c007ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 63XXESB USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci13: <ACPI PCI bus> on pcib13
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0xb0000000-0xb7ffffff,0xb8b00000-0xb8b0ffff irq 17 at device 12.0 on pci13
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 20 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel AHCI controller> port 0x40d8-0x40df,0x40f4-0x40f7,0x40d0-0x40d7,0x40f0-0x40f3,0x4020-0x403f mem 0xb8c00000-0xb8c003ff irq 20 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 6 ports detected
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci1
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xcf000-0xcffff,0xd0000-0xd0fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DVDR <Optiarc DVD RW AD-7203A/1.06> at ata0-master UDMA66
da0 at mpt0 bus 0 target 1 lun 0
da0: <SEAGATE ST373455SS 0002> Fixed Direct Access SCSI-5 device 
da0: 300.000MB/s transfers
da0: Command Queueing Enabled
da0: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da1 at mpt0 bus 0 target 2 lun 0
da1: <SEAGATE ST373455SS 0002> Fixed Direct Access SCSI-5 device 
da1: 300.000MB/s transfers
da1: Command Queueing Enabled
da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da2 at mpt0 bus 0 target 3 lun 0
da2: <SEAGATE ST373455SS 0002> Fixed Direct Access SCSI-5 device 
da2: 300.000MB/s transfers
da2: Command Queueing Enabled
da2: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da3 at mpt0 bus 0 target 4 lun 0
da3: <SEAGATE ST373455SS 0002> Fixed Direct Access SCSI-5 device 
da3: 300.000MB/s transfers
da3: Command Queueing Enabled
da3: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
GEOM_LABEL: Label for provider da0s1a is ufsid/4bb8671fc51754a0.
GEOM_LABEL: Label for provider da0s1d is ufsid/4bb867208ab92034.
GEOM_LABEL: Label for provider da0s1e is ufsid/4bb86720a36aaaac.
GEOM_LABEL: Label for provider da0s1f is ufsid/4bb86720fb28add9.
Trying to mount root from ufs:/dev/da0s1a
GEOM_LABEL: Label ufsid/4bb8671fc51754a0 removed.
GEOM_LABEL: Label for provider da0s1a is ufsid/4bb8671fc51754a0.
GEOM_LABEL: Label ufsid/4bb86720a36aaaac removed.
GEOM_LABEL: Label for provider da0s1e is ufsid/4bb86720a36aaaac.
GEOM_LABEL: Label ufsid/4bb86720fb28add9 removed.
GEOM_LABEL: Label for provider da0s1f is ufsid/4bb86720fb28add9.
GEOM_LABEL: Label ufsid/4bb867208ab92034 removed.
GEOM_LABEL: Label for provider da0s1d is ufsid/4bb867208ab92034.
GEOM_LABEL: Label ufsid/4bb8671fc51754a0 removed.
GEOM_LABEL: Label ufsid/4bb86720a36aaaac removed.
GEOM_LABEL: Label ufsid/4bb86720fb28add9 removed.
GEOM_LABEL: Label ufsid/4bb867208ab92034 removed.

pciconf -lv

Код: Выделить всё

hostb0@pci0:0:0:0:	class=0x060000 card=0x34788086 chip=0x25d88086 rev=0xb1 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5000P Chipset Memory Controller Hub'
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:0:2:0:	class=0x060400 card=0x00000000 chip=0x25f78086 rev=0xb1 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '5000 Series Chipset PCIe x8 Port 2-3'
    class      = bridge
    subclass   = PCI-PCI
pcib7@pci0:0:3:0:	class=0x060400 card=0x00000000 chip=0x25e38086 rev=0xb1 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '5000 Series Chipset PCIe x4 Port 3'
    class      = bridge
    subclass   = PCI-PCI
pcib8@pci0:0:4:0:	class=0x060400 card=0x00000000 chip=0x25f88086 rev=0xb1 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '5000 Series Chipset PCIe x8 Port 4-5'
    class      = bridge
    subclass   = PCI-PCI
pcib9@pci0:0:5:0:	class=0x060400 card=0x00000000 chip=0x25e58086 rev=0xb1 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '5000 Series Chipset PCIe x4 Port 5'
    class      = bridge
    subclass   = PCI-PCI
pcib10@pci0:0:6:0:	class=0x060400 card=0x00000000 chip=0x25f98086 rev=0xb1 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '5000 Series Chipset PCIe x8 Port 6-7'
    class      = bridge
    subclass   = PCI-PCI
pcib11@pci0:0:7:0:	class=0x060400 card=0x00000000 chip=0x25e78086 rev=0xb1 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '5000 Series Chipset PCIe x4 Port 7'
    class      = bridge
    subclass   = PCI-PCI
none0@pci0:0:8:0:	class=0x088000 card=0x34788086 chip=0x1a388086 rev=0xb1 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5000 5000 Series Chipset DMA Engine'
    class      = base peripheral
hostb1@pci0:0:16:0:	class=0x060000 card=0x34788086 chip=0x25f08086 rev=0xb1 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5000 Series Chipset Error Reporting Registers'
    class      = bridge
    subclass   = HOST-PCI
hostb2@pci0:0:16:1:	class=0x060000 card=0x34788086 chip=0x25f08086 rev=0xb1 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5000 Series Chipset Error Reporting Registers'
    class      = bridge
    subclass   = HOST-PCI
hostb3@pci0:0:16:2:	class=0x060000 card=0x34788086 chip=0x25f08086 rev=0xb1 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5000 Series Chipset Error Reporting Registers'
    class      = bridge
    subclass   = HOST-PCI
hostb4@pci0:0:17:0:	class=0x060000 card=0x34788086 chip=0x25f18086 rev=0xb1 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5000 Series Chipset Reserved Registers'
    class      = bridge
    subclass   = HOST-PCI
hostb5@pci0:0:19:0:	class=0x060000 card=0x34788086 chip=0x25f38086 rev=0xb1 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5000 Series Chipset Reserved Registers'
    class      = bridge
    subclass   = HOST-PCI
hostb6@pci0:0:21:0:	class=0x060000 card=0x34788086 chip=0x25f58086 rev=0xb1 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5000 Series Chipset FBD Registers'
    class      = bridge
    subclass   = HOST-PCI
hostb7@pci0:0:22:0:	class=0x060000 card=0x34788086 chip=0x25f68086 rev=0xb1 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5000 Series Chipset FBD Registers'
    class      = bridge
    subclass   = HOST-PCI
pcib12@pci0:0:28:0:	class=0x060400 card=0x34788086 chip=0x26908086 rev=0x09 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '631xESB/632xESB/3100 PCIe Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
uhci0@pci0:0:29:0:	class=0x0c0300 card=0x34788086 chip=0x26888086 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '631xESB/632xESB/3100 Chipset USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
uhci1@pci0:0:29:1:	class=0x0c0300 card=0x34788086 chip=0x26898086 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '631xESB/632xESB/3100 Chipset USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
uhci2@pci0:0:29:2:	class=0x0c0300 card=0x34788086 chip=0x268a8086 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '631xESB/632xESB/3100 Chipset USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
uhci3@pci0:0:29:3:	class=0x0c0300 card=0x34788086 chip=0x268b8086 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '631xESB/632xESB/3100 Chipset USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:29:7:	class=0x0c0320 card=0x34788086 chip=0x268c8086 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '631xESB/632xESB/3100 Chipset USB2 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
pcib13@pci0:0:30:0:	class=0x060401 card=0x34788086 chip=0x244e8086 rev=0xd9 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:	class=0x060100 card=0x34788086 chip=0x26708086 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '631xESB/632xESB/3100 LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
atapci0@pci0:0:31:1:	class=0x01018a card=0x34788086 chip=0x269e8086 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '631xESB/632xESB/3100 Ultra ATA Storage Controller'
    class      = mass storage
    subclass   = ATA
atapci1@pci0:0:31:2:	class=0x010601 card=0x34788086 chip=0x26818086 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '62089A2 LSI LOGIC, 62089A2, LSISAS1068 B0, T 0620, WE 119200.1'
    class      = mass storage
    subclass   = SATA
none1@pci0:0:31:3:	class=0x0c0500 card=0x34788086 chip=0x269b8086 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '631xESB/632xESB/3100 SMBus Controller'
    class      = serial bus
    subclass   = SMBus
pcib2@pci0:1:0:0:	class=0x060400 card=0x34798086 chip=0x35008086 rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '631xESB/632xESB PCIe Upstream Port'
    class      = bridge
    subclass   = PCI-PCI
pcib6@pci0:1:0:3:	class=0x060400 card=0x34798086 chip=0x350c8086 rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '631xESB/632xESB PCIe to PCI-X Bridge'
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:2:0:0:	class=0x060400 card=0x34798086 chip=0x35108086 rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '631xESB/632xESB PCIe Downstream Port E1'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:2:1:0:	class=0x060400 card=0x34798086 chip=0x35148086 rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '631xESB/632xESB PCIe Downstream Port E2'
    class      = bridge
    subclass   = PCI-PCI
pcib5@pci0:2:2:0:	class=0x060400 card=0x34798086 chip=0x35188086 rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '631xESB/632xESB PCIe Downstream Port E3'
    class      = bridge
    subclass   = PCI-PCI
mpt0@pci0:4:0:0:	class=0x010000 card=0x34788086 chip=0x00561000 rev=0x04 hdr=0x00
    vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
    device     = 'SAS 3000 series, 4-port with 1064E -StorPort'
    class      = mass storage
    subclass   = SCSI
em0@pci0:5:0:0:	class=0x020000 card=0x34768086 chip=0x10968086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'PRO/1000 EB Network Connection'
    class      = network
    subclass   = ethernet
em1@pci0:5:0:1:	class=0x020000 card=0x34768086 chip=0x10968086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'PRO/1000 EB Network Connection'
    class      = network
    subclass   = ethernet
vgapci0@pci0:13:12:0:	class=0x030000 card=0x34788086 chip=0x515e1002 rev=0x02 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'Radeon ES1000 Radeon ES1000'
    class      = display
    subclass   = VGA

Добавлено: **2010-04-04 15:13:00**

вы уверены что он железный? на железном диски отдельные не видно

Добавлено: **2010-04-04 15:46:50**

Если он программный, как быть ?

Добавлено: **2010-04-04 15:57:03**

z0mb1e писал(а):Если он программный, как быть ?

Я ж сказал уже

Ну что могу сказать. это не совсем полноценный железезный рэйд.
Либо покупайте нормальный контроллер. Либо делайте средствами операционки.

Добавлено: **2010-04-04 23:04:28**

я о том, можно ли как то задействовать этот инвалидный рейд, или проще сделать средствами ОС?

Добавлено: **2010-04-05 6:00:21**

z0mb1e писал(а):я о том, можно ли как то задействовать этот инвалидный рейд, или проще сделать средствами ОС?

вопрос не как а зачем. Если у вас материнская плата умрет, вы хотите искать точно такую же, чтобы собрать рейд обратно?

Добавлено: **2010-04-05 12:06:19**

вопрос не как а зачем. Если у вас материнская плата умрет, вы хотите искать точно такую же, чтобы собрать рейд обратно?

Естественно нет

хотя если мать помрёт это будет жесть в любом случае, но лишний головняк не нужен

Добавлено: **2010-04-05 12:34:13**

z0mb1e писал(а):Естественно нет хотя если мать помрёт это будет жесть в любом случае, но лишний головняк не нужен

тогда ответ очевиден

Добавлено: **2010-04-17 17:52:11**

Поставил 8.0
Заметил пару забавных вещей.
При инстале с созданным "хардварным" рейдом ладер видит 1 винт )
убираю рейд видит 4 )

mptutil show adapter грит следующее:

Код: Выделить всё

mpt0 Adapter:
       Board Name: UNUSED
   Board Assembly: 
        Chip Name: C1064E
    Chip Revision: UNUSED
      RAID Levels: none

Добавлено: **2010-04-17 20:48:50**

Код: Выделить всё

dmesg -a

c восьмёрки

Добавлено: **2010-04-26 13:11:56**

вот)

Код: Выделить всё

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:02:08 UTC 2009
    root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz (2493.76-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x40ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,XSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 17179869184 (16384 MB)
avail memory = 16524500992 (15758 MB)
ACPI APIC Table: <INTEL  S5000PSL>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL S5000PSL> on motherboard
acpi0: [ITHREAD]
ACPI Error: Package List length (6) larger than NumElements count (2), truncated
 20090521 dsobject-590
ACPI Error: Package List length (6) larger than NumElements count (2), truncated
 20090521 dsobject-590
ACPI Error: Package List length (6) larger than NumElements count (2), truncated
 20090521 dsobject-590
ACPI Error: Package List length (6) larger than NumElements count (2), truncated
 20090521 dsobject-590
ACPI Error: Package List length (6) larger than NumElements count (2), truncated
 20090521 dsobject-590
ACPI Error: Package List length (6) larger than NumElements count (2), truncated
 20090521 dsobject-590
ACPI Error: Package List length (6) larger than NumElements count (2), truncated
 20090521 dsobject-590
ACPI Error: Package List length (6) larger than NumElements count (2), truncated
 20090521 dsobject-590
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xca2,0xca3,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 1.0 on pci2
pci4: <ACPI PCI bus> on pcib4
mpt0: <LSILogic SAS/SATA Adapter> port 0x3000-0x30ff mem 0xb8910000-0xb8913fff,0xb8900000-0xb890ffff irq 17 at device 0.0 on pci4
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.14.0
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2
pci5: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x2020-0x203f mem 0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at device 0.0 on pci5
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:15:17:98:fe:14
em1: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x2000-0x201f mem 0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at device 0.1 on pci5
em1: Using MSI interrupt
em1: [FILTER]
em1: Ethernet address: 00:15:17:98:fe:15
pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci6: <ACPI PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at device 3.0 on pci0
pci7: <PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci10: <ACPI PCI bus> on pcib10
pcib11: <PCI-PCI bridge> at device 7.0 on pci0
pci11: <PCI bus> on pcib11
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib12: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci12: <ACPI PCI bus> on pcib12
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x40a0-0x40bf irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x1f30
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x4080-0x409f irq 22 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0f30
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x4060-0x407f irq 23 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x0f30
usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x4040-0x405f irq 22 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x0f30
usbus3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xb8c00400-0xb8c007ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 63XXESB USB 2.0 controller> on ehci0
pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci13: <ACPI PCI bus> on pcib13
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0xb0000000-0xb7ffffff,0xb8b00000-0xb8b0ffff irq 17 at device 12.0 on pci13
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 20 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel 63XXESB2 SATA300 controller> port 0x40d8-0x40df,0x40f4-0x40f7,0x40d0-0x40d7,0x40f0-0x40f3,0x4020-0x403f mem 0xb8c00000-0xb8c003ff irq 20 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI called from vendor specific driver
atapci1: AHCI v1.10 controller with 6 3Gbps ports, PM supported
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci1
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xcf000-0xcffff,0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
ZFS filesystem version 13
ZFS storage pool version 13
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
acd0: DVDR <Optiarc DVD RW AD-7203A/1.06> at ata0-master UDMA66
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
da0 at mpt0 bus 0 target 1 lun 0
da0: <SEAGATE ST373455SS 0002> Fixed Direct Access SCSI-5 device 
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da1 at mpt0 bus 0 target 2 lun 0
da1: <SEAGATE ST373455SS 0002> Fixed Direct Access SCSI-5 device 
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da2 at mpt0 bus 0 target 3 lun 0
da2: <SEAGATE ST373455SS 0002> Fixed Direct Access SCSI-5 device 
da2: 300.000MB/s transfers
da2: Command Queueing enabled
da2: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da3 at mpt0 bus 0 target 4 lun 0
da3: <SEAGATE ST373455SS 0002> Fixed Direct Access SCSI-5 device 
da3: 300.000MB/s transfers
da3: Command Queueing enabled
da3: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
Trying to mount root from ufs:/dev/da0s1a
Setting hostuuid: ceb72e81-f38e-11dd-852f-00151798fe14.
Setting hostid: 0xad87e362.
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
.
Starting file system checks:
/dev/da0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1a: clean, 33728857 free (70057 frags, 4207350 blocks, 0.2% fragmentation)
Mounting local file systems:
.
Setting hostname: stronghold
.
Starting Network: lo0 em0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=3<RXCSUM,TXCSUM>
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 
	inet6 ::1 prefixlen 128 
	inet 127.0.0.1 netmask 0xff000000 
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
	ether 00:15:17:98:fe:14
	inet 192.168.0.5 netmask 0xffffff00 broadcast 192.168.0.255
	media: Ethernet autoselect
	status: no carrier
add net default: gateway 192.168.0.1
Additional routing options:
 IP gateway=YES
.
Starting devd.
Creating and/or trimming log files
.
Starting syslogd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/zsh
32-bit compatibility ldconfig path: /usr/lib32
Clearing /tmp (X related).
Updating motd:
.
Configuring syscons:
 keymap
 blanktime
.
Starting sshd.
em0: link state changed to UP
Script /etc/rc.d/sendmail interrupted
Starting cron.
Starting inetd.
Starting background file system checks in 60 seconds.

Mon Apr 26 10:06:54 UTC 2010

Добавлено: **2010-04-27 10:52:58**

ну сколько можно воду в ступе толочь...
Драйвер mpt: http://www.freebsd.org/cgi/man.cgi?quer ... .0-RELEASE
Обычный Host Bus Adapter. Нет на нём аппаратный рэйдов. Совсем никаких.
Бывает с вариантом выхлопа типа Fibre Channel.

Добавлено: **2010-04-27 11:15:42**

Ладно с mpt проехали)) теперь буду знать что на нём рейдов совсем нет)))), но всё же почему ладер ощущает "RAID" а сисинстал нет ?

Добавлено: **2010-04-28 10:11:29**

Intel® Embedded RAID Technology
Биосовая утилита пишет на диски метаинформацию, о принадлежности к тому или иному массиву. При загрузке системы, драйвер подхватывает эту информацию и предоставляет системе псевдоустройства, в соответствии с конфигурацией. Софтовый рэйд на уровне драйвера. Для АТА дисков, это рэйд через atacontrol. Со сказёвыми, значит, всё несколько запутанней. В общем фигня всё это.

Добавлено: **2010-04-28 14:32:27**

Мда, пойду трясти на нормальный железный рейд

Возможно глупый вопрос, но всё же. возможно ли подсунуть фре драйвера от опенсоляриса ? или это бред ?

Добавлено: **2010-04-28 14:47:27**

нет

forum.lissyara.su

Фря не видит аппаратный RAID

Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID

Re: Фря не видит аппаратный RAID