forum.lissyara.su

Код: Выделить всё

ifconfig

Код: Выделить всё

mount_msdosfs /dev/da0s1 /flash

Код: Выделить всё

# -- sysinstall generated deltas -- # Wed Mar  3 03:13:32 2010
# Created: Wed Mar  3 03:13:32 2010
# Enable network daemons for user convenience.
# Please make all changes to this file, not to /etc/defaults/rc.conf.
# This file now contains just the overrides from /etc/defaults/rc.conf.
ifconfig_rl0="inet 10.12.4.200 LAN netmask 255.255.255.0"
ifconfig_rl1="inet 10.12.2.200 WAN netmask 255.255.255.0"
hostname="mail.domain.ru"
inetd_enable="YES"
keymap="ru.koi8-r"
moused_enable="YES"
moused_port="/dev/psm0"
sshd_enable="YES"

# -- sysinstall generated deltas -- # Wed Apr  7 16:26:42 2010
ifconfig_rl0="inet 10.12.4.200 LAN netmask 255.255.255.0 media 100BaseTX <full-duplex>"
ifconfig_rl1="inet 10.12.2.200 WAN netmask 255.255.255.0 media 100BaseTX <full-duplex>"
defaultrouter="10.12.4.3"
hostname="mail.domain.ru" 

Код: Выделить всё

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009
    root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (300.68-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x660  Stepping = 0
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 134217728 (128 MB)
avail memory = 116498432 (111 MB)
kbd1 at kbdmux0
ACPI Error: A valid RSDP was not found 20090521 tbxfroot-309
ACPI: Table initialisation failed: AE_NOT_FOUND
ACPI: Try disabling either ACPI or apic support.
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
$PIR: ROUTE_INTERRUPT failed.
vgapci0: <VGA-compatible display> mem 0xe0000000-0xe3ffffff irq 11 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f at device 7.2 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
piix0: <PIIX Timecounter> port 0x5000-0x500f at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xec000000-0xec0000ff irq 10 at device 18.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:40:f4:ea:52:18
rl0: [ITHREAD]
rl1: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xec001000-0xec0010ff irq 5 at device 19.0 on pci0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> PHY 0 on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: Ethernet address: 00:40:f4:ea:6d:0d
rl1: [ITHREAD]
cpu0 on motherboard
pmtimer0 on isa0
atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0a03> can't assign resources (port)
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model NetMouse/NetScroll Optical, device ID 0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501 on isa0
uart0: [FILTER]
fdc0: <Enhanced floppy controller> at port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 pnpid PNP0700 on isa0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Standard parallel printer port> at port 0x378-0x37f irq 7 pnpid PNP0400 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 pnpid PNP0501 on isa0
uart1: [FILTER]
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0a03> can't assign resources (port)
Timecounter "TSC" frequency 300684035 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ad1: 32253MB <Seagate ST380215A 3.AAD> at ata0-slave UDMA33
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
acd0: DVDROM <TSSTcorpDVD-ROM SH-D162D/SB03> at ata1-master UDMA33
uhub0: 2 ports with 2 removable, self powered
Trying to mount root from ufs:/dev/ad1s1a
g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5
ugen0.2: <Kingston> at usbus0
umass0: <Kingston DataTraveler II, class 0/0, rev 2.00/1.00, addr 2> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Kingston DataTraveler II PMAP> Removable Direct Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: 991MB (2030592 512 byte sectors: 64H 32S/T 991C)
g_vfs_done():fd0[READ(offset=9728, length=512)]error = 5

Код: Выделить всё

rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8<VLAN_MTU>
	ether 00:40:f4:ea:52:18
	media: Ethernet autoselect (none)
	status: no carrier
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8<VLAN_MTU>
	ether 00:40:f4:ea:6d:0d
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=3<RXCSUM,TXCSUM>
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 
	inet6 ::1 prefixlen 128 
	inet 127.0.0.1 netmask 0xff000000  

Код: Выделить всё

ifconfig_rl0="inet 10.12.4.200 LAN netmask 255.255.255.0"
ifconfig_rl1="inet 10.12.2.200 WAN netmask 255.255.255.0"