Код: Выделить всё
May 9 02:12:13 rrr smartd[59079]: Device: /dev/ad16, Self-Test Log error count increased from 5 to 6
May 9 02:12:13 rrr smartd[59079]: Device: /dev/ad16, 2 Currently unreadable (pending) sectors
May 9 02:12:13 rrr smartd[59079]: Device: /dev/ad16, 1 Offline uncorrectable sectors
May 9 02:12:13 rrr smartd[59079]: Device: /dev/ad16, previous self-test completed with error (read test element)
May 9 02:12:13 rrr smartd[59079]: Device: /dev/ad16, Self-Test Log error count increased from 5 to 6
May 9 02:20:34 rrr smartd[59079]: Device: /dev/ad16, 2 Currently unreadable (pending) sectors
May 9 02:20:34 rrr smartd[59079]: Device: /dev/ad16, 1 Offline uncorrectable sectors
Код: Выделить всё
uname -a
FreeBSD rrr 7.3-STABLE FreeBSD 7.3-STABLE #7: Fri Apr 23 22:09:48 EEST 2010
atacontrol list
ATA channel 7:
Master: ad14 <WDC WD1002FBYS-01A6B0/03.00C05> SATA revision 2.x
Slave: no device present
ATA channel 8:
Master: ad16 <WDC WD1002FBYS-01A6B0/03.00C05> SATA revision 2.x
Slave: no device present
gmirror list data0
Geom name: data0
State: COMPLETE
Components: 1
Balance: round-robin
Slice: 4096
Flags: NONE
GenID: 1
SyncID: 1
ID: 1102301989
Providers:
1. Name: mirror/data0
Mediasize: 1000204885504 (932G)
Sectorsize: 512
Mode: r1w1e2
Consumers:
1. Name: ad14
Mediasize: 1000204886016 (932G)
Sectorsize: 512
Mode: r1w1e1
State: ACTIVE
Priority: 0
Flags: DIRTY
GenID: 1
SyncID: 1
ID: 954069909
smartctl -a /dev/ad16 выдает:
Код: Выделить всё
smartctl 5.39.1 2010-01-28 r3054 [FreeBSD 7.3-STABLE amd64] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE3 Serial ATA family
Device Model: WDC WD1002FBYS-01A6B0
Serial Number: WD-WMATV0221468
Firmware Version: 03.00C05
User Capacity: 1,000,204,886,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun May 9 20:34:48 2010 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (18600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 214) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 1100
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 79
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 098 000 Old_age Always - 98
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 79
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 78
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 79
194 Temperature_Celsius 0x0022 116 086 000 Old_age Always - 34
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 2
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 79 1065486884
# 2 Extended offline Completed: read failure 90% 56 1065486884
# 3 Short offline Completed: read failure 90% 55 1065486884
# 4 Extended offline Completed: read failure 90% 46 1065486884
# 5 Short offline Completed: read failure 90% 31 1065486884
# 6 Short offline Completed: read failure 90% 7 1065486884
# 7 Short offline Completed without error 00% 1643 -
# 8 Short offline Completed without error 00% 1619 -
# 9 Short offline Completed without error 00% 1595 -
#10 Short offline Completed without error 00% 1572 -
#11 Extended offline Completed without error 00% 1552 -
#12 Short offline Completed without error 00% 1547 -
#13 Short offline Completed without error 00% 1523 -
#14 Short offline Completed without error 00% 1500 -
#15 Short offline Completed without error 00% 1476 -
#16 Short offline Completed without error 00% 1452 -
#17 Short offline Completed without error 00% 1428 -
#18 Short offline Completed without error 00% 1404 -
#19 Extended offline Completed without error 00% 1384 -
#20 Short offline Completed without error 00% 1380 -
#21 Short offline Completed without error 00% 1356 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.