forum.lissyara.su

FreeBSD 8.1-RELEASE #0: Tue Aug 17 15:33:40 MSD 2010     root@vl.pnz.local:/usr/obj/usr/src/sys/NFSBOOT

uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub_attach: getting hub descriptor failed,error=USB_ERR_SHORT_XFER

pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0xd6018086 chip=0x5a331002 rev=0x01 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'Northbridge: Radeon Xpress 200 (RC410)'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x5a3f1002 chip=0x5a3f1002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'RS480 PCI Bridge'
class = bridge
subclass = PCI-PCI
atapci0@pci0:0:17:0: class=0x01018f card=0xd6018086 chip=0x437a1002 rev=0x80 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB400 Serial ATA Controller'
class = mass storage
subclass = ATA
atapci1@pci0:0:18:0: class=0x01018f card=0xd6018086 chip=0x43791002 rev=0x80 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB400 Serial ATA Controller'
class = mass storage
subclass = ATA
ohci0@pci0:0:19:0: class=0x0c0310 card=0xd6018086 chip=0x43741002 rev=0x80 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB400 OHCI USB Controller'
class = serial bus
subclass = USB
ohci1@pci0:0:19:1: class=0x0c0310 card=0xd6018086 chip=0x43751002 rev=0x80 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB400 OHCI USB Controller'
class = serial bus
subclass = USB
ehci0@pci0:0:19:2: class=0x0c0320 card=0xd6018086 chip=0x43731002 rev=0x80 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB400 EHCI USB 2.0 Controller'
class = serial bus
subclass = USB
none0@pci0:0:20:0: class=0x0c0500 card=0xd6018086 chip=0x43721002 rev=0x81 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'ATI SMBus (x200)'
class = serial bus
subclass = SMBus
atapci2@pci0:0:20:1: class=0x01018a card=0xd6018086 chip=0x43761002 rev=0x80 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'PATA 133 Controller (SB4xx)'
class = mass storage
subclass = ATA
isab0@pci0:0:20:3: class=0x060100 card=0xd6018086 chip=0x43771002 rev=0x80 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB400 PCI-ISA Bridge'
class = bridge
subclass = PCI-ISA
pcib2@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43711002 rev=0x80 hdr=0x01
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB400 PCI-PCI Bridge'
class = bridge
subclass = PCI-PCI
vgapci0@pci0:1:5:0: class=0x030000 card=0xd6018086 chip=0x5a611002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'ATI RADEON Xpress Series (RC410)'
class = display
subclass = VGA
rl0@pci0:2:2:0: class=0x020000 card=0xd6018086 chip=0x813910ec rev=0x10 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'Realtek RTL8139 Family PCI Fast Ethernet NIC (RTL-8139/8139C/8139D)'
class = network
subclass = ethernet

usbconfig
ugen0.1: <OHCI root HUB ATI> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON

ehci0@pci0:0:19:2: class=0x0c0320 card=0xd6018086 chip=0x43731002 rev=0x80 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB400 EHCI USB 2.0 Controller'
class = serial bus
subclass = USB

usbconfig
ugen0.1: <OHCI root HUB ATI> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON

ehci0@pci0:0:29:7:      class=0x0c0320 card=0x80a61043 chip=0x265c8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB 2.0 EHCI Controller (82801FB/FR/FW/FRW)'
    class      = serial bus
    subclass   = USB

# usbconfig
ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen3.1: <UHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen4.1: <EHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON

densan писал(а):Да куда провереннее, материнке более 3 лет, отлично работала на 6,7,8.0 а на 8.1 косяк.

hizel писал(а):напишите багрепорт