forum.lissyara.su

Добавлено: **2011-06-02 10:03:08**

Добрый день, уважаемые коллеги.

Прошу вас по возможности помочь мне, начинающему пользователю FreeBSD, разобраться со следующей проблемой.
В компании NIX был куплен следующий сервер - http://www.nix.ru/autocatalog/server_sy ... 74055.html

И к сожалению FreeBSD при попытке установить систему с "0" не видит ни RAID-массива (RAID1), ни дисков по раздельности (когда разрушаю рейд-массив). Говорит "No disk found..."
Windows Server 2008 R2 видит и RAID и диски по раздельности. Ubuntu 10 Linux тоже всё видит.

Но по ряду причин я бы хотел, чтобы на этом сервере стоял именно FreeBSD.
Я пробовал FreeBSD 8.1/8.2 как x86 так и x64.

Видимо какие-то проблемы с драйверами под данный RAID-контроллер...
Подскажите пожалуйста, в какую сторону мне копать?

Извините за нубский вопрос, но может быть, необходимо привести ешё какую-нить информацию?

Добавлено: **2011-06-02 10:04:37**

Гость писал(а):Добрый день, уважаемые коллеги.

Прошу вас по возможности помочь мне, начинающему пользователю FreeBSD, разобраться со следующей проблемой.
В компании NIX был куплен следующий сервер - http://www.nix.ru/autocatalog/server_sy ... 74055.html

И к сожалению FreeBSD при попытке установить систему с "0" не видит ни RAID-массива (RAID1), ни дисков по раздельности (когда разрушаю рейд-массив). Говорит "No disk found..."
Windows Server 2008 R2 видит и RAID и диски по раздельности. Ubuntu 10 Linux тоже всё видит.

Но по ряду причин я бы хотел, чтобы на этом сервере стоял именно FreeBSD.
Я пробовал FreeBSD 8.1/8.2 как x86 так и x64.

Видимо какие-то проблемы с драйверами под данный RAID-контроллер...
Подскажите пожалуйста, в какую сторону мне копать?

Извините за нубский вопрос, но может быть, необходимо привести ешё какую-нить информацию?

Сорри, постил я.
Почему-то отправился как от гостя...

Добавлено: **2011-06-02 11:34:23**

надо сначала было смотреть что за рейд контроллер

Добавлено: **2011-06-02 11:41:10**

manefesto писал(а):надо сначала было смотреть что за рейд контроллер

Вы хотите сказать, что с данным RAID-контроллером не получится установить FreeBSD ?

Добавлено: **2011-06-02 11:50:58**

совсем не факт что получиться.
как правило сначала народ советуется, а уж потом покупает.
вы сделали наоборот.

Добавлено: **2011-06-02 12:07:26**

Благодарю за совет. В я так и планирую сделать.
Не могли бы вы подсказать (по возможности с того же сайта www.nix.ru) конфигурацию сервера с хорошим RAID -контроллером (или просто хороший RAID-контроллер для RAID1 или RAID5), который будет работать с FreeBSD 8.2 x64.

Добавлено: **2011-06-02 13:12:32**

сейчас леха придет, рассыдит.
а вообще покопайся в этом разделе

Добавлено: **2011-06-02 21:33:42**

я так понимаю, там ICH10R, и более ничё.
должен видеться.
---
давайте

Код: Выделить всё

dmesg

и

Код: Выделить всё

pciconf -lv

Добавлено: **2011-06-03 8:48:59**

Alex Keda писал(а):я так понимаю, там ICH10R, и более ничё.
должен видеться.
---
давайте
Код: Выделить всё
dmesg
и
Код: Выделить всё
pciconf -lv

Эм...
Прошу прощения.
Как снять dmesg и pciconf с машины, на которой еще не установлен FreeBSD ?

Добавлено: **2011-06-03 9:42:40**

live CD, или создать загрузочную флешку http://www.lissyara.su/articles/freebsd ... usb_flash/

Добавлено: **2011-06-03 15:07:16**

Не хочу создавать новую тему, обрисую ситуацию здесь.
Есть сервак на материнке Supermicro P4SCT+ http://www.supermicro.com/products/moth ... P4SCT_.cfm , + 4 HDS722580VLSA80. В настройках RAID создал массив RAID10 и того вышло 153 GB. В процессе установки Free 8.1 видны имеющиеся диски : ad4,ad6,ad8,ad10, а также созданный массив ar0. При попытке установить в ar0 выдает:Unable to make new root filesystem on /dev/ar0s1a! и на этом процесс заканчивается! С RAID1 та же картина

Отключал raid ставил на 1 диск после установки все останвливается на мигающем курсоре.На raid ставлю в первый раз, сильно не пинать! Прошу помощи!

Добавлено: **2011-06-03 15:44:03**

а вы создайте.
тут другое обсуждается, если вы не заметили.

Добавлено: **2011-06-07 11:33:44**

Alex Keda писал(а):я так понимаю, там ICH10R, и более ничё.
должен видеться.
---
давайте
Код: Выделить всё
dmesg
и
Код: Выделить всё
pciconf -lv

dmesg
-----

Код: Выделить всё

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE #0: Mon Jul 19 02:36:49 UTC 2010
    root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz (2394.28-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206c2  Family = 6  Model = 2c  Stepping = 2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b17>,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 6442450944 (6144 MB)
avail memory = 6083452928 (5801 MB)
ACPI APIC Table: <INTEL  S5520UR >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID: 18
 cpu5 (AP): APIC ID: 19
 cpu6 (AP): APIC ID: 20
 cpu7 (AP): APIC ID: 21
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL S5520UR> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 28 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 Network Connection version - 1.9.5> port 0x2020-0x203f mem 0xb1a20000-0xb1a3ffff,0xb1a44000-0xb1a47fff irq 40 at device 0.0 on pci1
igb0: Using MSIX interrupts with 5 vectors
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: Ethernet address: 00:15:17:da:d6:54
igb1: <Intel(R) PRO/1000 Network Connection version - 1.9.5> port 0x2000-0x201f mem 0xb1a00000-0xb1a1ffff,0xb1a40000-0xb1a43fff irq 28 at device 0.1 on pci1
igb1: Using MSIX interrupts with 5 vectors
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: Ethernet address: 00:15:17:da:d6:55
pcib2: <ACPI PCI-PCI bridge> irq 24 at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 26 at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 2.0 on pci4
pci5: <PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 4.0 on pci4
pci6: <PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <PCI-PCI bridge> at device 0.0 on pci7
pci8: <PCI bus> on pcib8
pcib9: <PCI-PCI bridge> at device 2.0 on pci8
pci9: <PCI bus> on pcib9
pcib10: <PCI-PCI bridge> at device 4.0 on pci8
pci10: <PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> irq 33 at device 10.0 on pci0
pci12: <ACPI PCI bus> on pcib12
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0x30e0-0x30ff irq 19 at device 26.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0x30c0-0x30df irq 19 at device 26.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0x30a0-0x30bf irq 19 at device 26.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xb1b22000-0xb1b223ff irq 19 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
pcib13: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci13: <ACPI PCI bus> on pcib13
mpt0: <LSILogic SAS/SATA Adapter> port 0x1000-0x10ff mem 0xb1940000-0xb1943fff,0xb1900000-0xb193ffff irq 16 at device 0.0 on pci13
mpt0: unable to map registers in PIO mode
pcib14: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci14: <ACPI PCI bus> on pcib14
vgapci0: <VGA-compatible display> mem 0xb0000000-0xb0ffffff,0xb1800000-0xb1803fff,0xb1000000-0xb17fffff irq 16 at device 0.0 on pci14
pcib15: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci15: <ACPI PCI bus> on pcib15
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0x3080-0x309f irq 16 at device 29.0 on pci0
uhci3: [ITHREAD]
usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0x3060-0x307f irq 16 at device 29.1 on pci0
uhci4: [ITHREAD]
usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0x3040-0x305f irq 16 at device 29.2 on pci0
uhci5: [ITHREAD]
usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xb1b21000-0xb1b213ff irq 16 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci16: <ACPI PCI bus> on pcib16
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0x3108-0x310f,0x3114-0x3117,0x3100-0x3107,0x3110-0x3113,0x3020-0x303f mem 0xb1b20000-0xb1b207ff irq 18 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI v1.20 controller with 6 3Gbps ports, PM not supported
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff on isa0
atkbd: unable to set the command byte.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to set the command byte.
ppc0: cannot reserve I/O port range
ACPI Warning for \\_PR_.CPU0._PSS: Return type mismatch - found Integer, expected Package (20100331/nspredef-1190)
acpi_perf0: invalid top level _PSS package
device_attach: acpi_perf0 attach returned 6
ACPI Warning for \\_PR_.CPU1._PSS: Return type mismatch - found Integer, expected Package (20100331/nspredef-1190)
acpi_perf1: invalid top level _PSS package
device_attach: acpi_perf1 attach returned 6
ACPI Warning for \\_PR_.CPU2._PSS: Return type mismatch - found Integer, expected Package (20100331/nspredef-1190)
acpi_perf2: invalid top level _PSS package
device_attach: acpi_perf2 attach returned 6
ACPI Warning for \\_PR_.CPU3._PSS: Return type mismatch - found Integer, expected Package (20100331/nspredef-1190)
acpi_perf3: invalid top level _PSS package
device_attach: acpi_perf3 attach returned 6
ACPI Warning for \\_PR_.CPU4._PSS: Return type mismatch - found Integer, expected Package (20100331/nspredef-1190)
acpi_perf4: invalid top level _PSS package
device_attach: acpi_perf4 attach returned 6
ACPI Warning for \\_PR_.CPU5._PSS: Return type mismatch - found Integer, expected Package (20100331/nspredef-1190)
acpi_perf5: invalid top level _PSS package
device_attach: acpi_perf5 attach returned 6
ACPI Warning for \\_PR_.CPU6._PSS: Return type mismatch - found Integer, expected Package (20100331/nspredef-1190)
acpi_perf6: invalid top level _PSS package
device_attach: acpi_perf6 attach returned 6
ACPI Warning for \\_PR_.CPU7._PSS: Return type mismatch - found Integer, expected Package (20100331/nspredef-1190)
acpi_perf7: invalid top level _PSS package
device_attach: acpi_perf7 attach returned 6
acpi_perf0: invalid top level _PSS package
device_attach: acpi_perf0 attach returned 6
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_perf1: invalid top level _PSS package
device_attach: acpi_perf1 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_perf2: invalid top level _PSS package
device_attach: acpi_perf2 attach returned 6
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
acpi_perf3: invalid top level _PSS package
device_attach: acpi_perf3 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
acpi_perf4: invalid top level _PSS package
device_attach: acpi_perf4 attach returned 6
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est4 attach returned 6
p4tcc4: <CPU Frequency Thermal Control> on cpu4
acpi_perf5: invalid top level _PSS package
device_attach: acpi_perf5 attach returned 6
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est5 attach returned 6
p4tcc5: <CPU Frequency Thermal Control> on cpu5
acpi_perf6: invalid top level _PSS package
device_attach: acpi_perf6 attach returned 6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est6 attach returned 6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
acpi_perf7: invalid top level _PSS package
device_attach: acpi_perf7 attach returned 6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est7 attach returned 6
p4tcc7: <CPU Frequency Thermal Control> on cpu7
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80e6aa98
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic18: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic21: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic19: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic20: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
ugen3.1: <Intel> at usbus3ugen4.1: <Intel> at usbus4ugen1.1: <Intel> at usbus1ugen0.1: <Intel> at usbus0ugen2.1: <Intel> at usbus2ugen5.1: <Intel> at usbus5ugen6.1: <Intel> at usbus6
uhub0: 

<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3


uhub1: 
<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4

uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub4: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub0: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen7.2: <vendor 0x05e3> at usbus7
umass0: <vendor 0x05e3 USB Storage, class 0/0, rev 2.00/0.24, addr 2> on usbus7
umass0:  SCSI over Bulk-Only; quirks = 0x0000
Root mount waiting for: usbus7
umass0:0:0:-1: Attached to scbus0
ugen2.2: <American Megatrends Inc.> at usbus2
ukbd0: <Keyboard Interface> on usbus2
kbd2 at ukbd0
ums0: <Mouse Interface> on usbus2
ums0: 3 buttons and [Z] coordinates ID=0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
cd0 at umass-sim0 bus 0 scbus0 target 0 lun 0
cd0: <Optiarc DVD RW AD-7700S 1.03> Removable CD-ROM SCSI-0 device 
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ugen7.3: <Initio> at usbus7
umass1: <Initio SDRW-08D1S-U, class 0/0, rev 2.00/9.65, addr 3> on usbus7
umass1:  8070i (ATAPI) over Bulk-Only; quirks = 0x0000
Root mount waiting for: usbus7
umass1:1:1:-1: Attached to scbus1
cd1 at umass-sim1 bus 1 scbus1 target 0 lun 0
cd1: <ASUS SDRW-08D1S-U A202> Removable CD-ROM SCSI-0 device 
cd1: 40.000MB/s transfers
cd1: cd present [168318 x 2048 byte records]
ugen5.2: <No brand> at usbus5
ukbd1: <No brand KVM, class 0/0, rev 1.10/0.00, addr 2> on usbus5
kbd3 at ukbd1
ums1: <No brand KVM, class 0/0, rev 1.10/0.00, addr 2> on usbus5
ums1: 5 buttons and [XYZ] coordinates ID=1
Trying to mount root from ufs:/dev/md0
ugen7.4: <vendor 0x3538> at usbus7
umass2: <vendor 0x3538 USB Mass Storage Device, class 0/0, rev 2.00/1.00, addr 4> on usbus7
umass2:  SCSI over Bulk-Only; quirks = 0x0000
umass2:2:2:-1: Attached to scbus2
-----

pciconf -lv
-----
hostb0@pci0:0:0:0:	class=0x060000 card=0x34de8086 chip=0x34068086 rev=0x22 hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:0:1:0:	class=0x060400 card=0x34de8086 chip=0x34088086 rev=0x22 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:0:3:0:	class=0x060400 card=0x34de8086 chip=0x340a8086 rev=0x22 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:0:5:0:	class=0x060400 card=0x34de8086 chip=0x340c8086 rev=0x22 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib7@pci0:0:7:0:	class=0x060400 card=0x34de8086 chip=0x340e8086 rev=0x22 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib11@pci0:0:9:0:	class=0x060400 card=0x34de8086 chip=0x34108086 rev=0x22 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib12@pci0:0:10:0:	class=0x060400 card=0x34de8086 chip=0x34118086 rev=0x22 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
none0@pci0:0:16:0:	class=0x080000 card=0x00de0086 chip=0x34258086 rev=0x22 hdr=0x00
    class      = base peripheral
    subclass   = interrupt controller
none1@pci0:0:16:1:	class=0x080000 card=0x00de0086 chip=0x34268086 rev=0x22 hdr=0x00
    class      = base peripheral
    subclass   = interrupt controller
none2@pci0:0:17:0:	class=0x080000 card=0x00de0086 chip=0x34278086 rev=0x22 hdr=0x00
    class      = base peripheral
    subclass   = interrupt controller
none3@pci0:0:17:1:	class=0x080000 card=0x00de0086 chip=0x34288086 rev=0x22 hdr=0x00
    class      = base peripheral
    subclass   = interrupt controller
ioapic0@pci0:0:19:0:	class=0x080020 card=0x00de0086 chip=0x342d8086 rev=0x22 hdr=0x00
    class      = base peripheral
    subclass   = interrupt controller
none4@pci0:0:20:0:	class=0x080000 card=0x00de0086 chip=0x342e8086 rev=0x22 hdr=0x00
    class      = base peripheral
    subclass   = interrupt controller
none5@pci0:0:20:1:	class=0x080000 card=0x00de0086 chip=0x34228086 rev=0x22 hdr=0x00
    class      = base peripheral
    subclass   = interrupt controller
none6@pci0:0:20:2:	class=0x080000 card=0x00de0086 chip=0x34238086 rev=0x22 hdr=0x00
    class      = base peripheral
    subclass   = interrupt controller
none7@pci0:0:20:3:	class=0x080000 card=0x00de0086 chip=0x34388086 rev=0x22 hdr=0x00
    class      = base peripheral
    subclass   = interrupt controller
ioapic1@pci0:0:21:0:	class=0x080020 card=0x00de0086 chip=0x342f8086 rev=0x22 hdr=0x00
    class      = base peripheral
    subclass   = interrupt controller
none8@pci0:0:22:0:	class=0x088000 card=0x34de8086 chip=0x34308086 rev=0x22 hdr=0x00
    class      = base peripheral
none9@pci0:0:22:1:	class=0x088000 card=0x34de8086 chip=0x34318086 rev=0x22 hdr=0x00
    class      = base peripheral
none10@pci0:0:22:2:	class=0x088000 card=0x34de8086 chip=0x34328086 rev=0x22 hdr=0x00
    class      = base peripheral
none11@pci0:0:22:3:	class=0x088000 card=0x34de8086 chip=0x34338086 rev=0x22 hdr=0x00
    class      = base peripheral
none12@pci0:0:22:4:	class=0x088000 card=0x34de8086 chip=0x34298086 rev=0x22 hdr=0x00
    class      = base peripheral
none13@pci0:0:22:5:	class=0x088000 card=0x34de8086 chip=0x342a8086 rev=0x22 hdr=0x00
    class      = base peripheral
none14@pci0:0:22:6:	class=0x088000 card=0x34de8086 chip=0x342b8086 rev=0x22 hdr=0x00
    class      = base peripheral
none15@pci0:0:22:7:	class=0x088000 card=0x34de8086 chip=0x342c8086 rev=0x22 hdr=0x00
    class      = base peripheral
uhci0@pci0:0:26:0:	class=0x0c0300 card=0x34de8086 chip=0x3a378086 rev=0x00 hdr=0x00
    class      = serial bus
    subclass   = USB
uhci1@pci0:0:26:1:	class=0x0c0300 card=0x34de8086 chip=0x3a388086 rev=0x00 hdr=0x00
    class      = serial bus
    subclass   = USB
uhci2@pci0:0:26:2:	class=0x0c0300 card=0x34de8086 chip=0x3a398086 rev=0x00 hdr=0x00
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:26:7:	class=0x0c0320 card=0x34de8086 chip=0x3a3c8086 rev=0x00 hdr=0x00
    class      = serial bus
    subclass   = USB
pcib13@pci0:0:28:0:	class=0x060400 card=0x34de8086 chip=0x3a408086 rev=0x00 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib14@pci0:0:28:4:	class=0x060400 card=0x34de8086 chip=0x3a488086 rev=0x00 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib15@pci0:0:28:5:	class=0x060400 card=0x34de8086 chip=0x3a4a8086 rev=0x00 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
uhci3@pci0:0:29:0:	class=0x0c0300 card=0x34de8086 chip=0x3a348086 rev=0x00 hdr=0x00
    class      = serial bus
    subclass   = USB
uhci4@pci0:0:29:1:	class=0x0c0300 card=0x34de8086 chip=0x3a358086 rev=0x00 hdr=0x00
    class      = serial bus
    subclass   = USB
uhci5@pci0:0:29:2:	class=0x0c0300 card=0x34de8086 chip=0x3a368086 rev=0x00 hdr=0x00
    class      = serial bus
    subclass   = USB
ehci1@pci0:0:29:7:	class=0x0c0320 card=0x34de8086 chip=0x3a3a8086 rev=0x00 hdr=0x00
    class      = serial bus
    subclass   = USB
pcib16@pci0:0:30:0:	class=0x060401 card=0x34de8086 chip=0x244e8086 rev=0x90 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:	class=0x060100 card=0x34de8086 chip=0x3a168086 rev=0x00 hdr=0x00
    class      = bridge
    subclass   = PCI-ISA
atapci0@pci0:0:31:2:	class=0x010601 card=0x34de8086 chip=0x3a228086 rev=0x00 hdr=0x00
    class      = mass storage
    subclass   = SATA
none16@pci0:0:31:3:	class=0x0c0500 card=0x34de8086 chip=0x3a308086 rev=0x00 hdr=0x00
    class      = serial bus
    subclass   = SMBus
igb0@pci0:1:0:0:	class=0x020000 card=0x34de8086 chip=0x10a78086 rev=0x02 hdr=0x00
    class      = network
    subclass   = ethernet
igb1@pci0:1:0:1:	class=0x020000 card=0x34de8086 chip=0x10a78086 rev=0x02 hdr=0x00
    class      = network
    subclass   = ethernet
pcib4@pci0:3:0:0:	class=0x060400 card=0x00000000 chip=0x806a111d rev=0x02 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib5@pci0:4:2:0:	class=0x060400 card=0x00000000 chip=0x806a111d rev=0x02 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib6@pci0:4:4:0:	class=0x060400 card=0x00000000 chip=0x806a111d rev=0x02 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib8@pci0:7:0:0:	class=0x060400 card=0x00000000 chip=0x806a111d rev=0x02 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib9@pci0:8:2:0:	class=0x060400 card=0x00000000 chip=0x806a111d rev=0x02 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib10@pci0:8:4:0:	class=0x060400 card=0x00000000 chip=0x806a111d rev=0x02 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
mpt0@pci0:13:0:0:	class=0x010000 card=0x35058086 chip=0x00621000 rev=0x04 hdr=0x00
    class      = mass storage
    subclass   = SCSI
vgapci0@pci0:14:0:0:	class=0x030000 card=0x01018086 chip=0x0522102b rev=0x02 hdr=0x00
    class      = display
    subclass   = VGA
-----

Добавлено: **2011-06-07 19:04:24**

Код: Выделить всё

mpt0: <LSILogic SAS/SATA Adapter> port 0x1000-0x10ff mem 0xb1940000-0xb1943fff,0xb1900000-0xb193ffff irq 16 at device 0.0 on pci13
mpt0: unable to map registers in PIO mode

у вас вполне поддерживаемый набортный SATA/SAS адаптер
для начала БИОС на дефолт скиньте

Добавлено: **2011-06-08 9:28:04**

Alex Keda писал(а):
Код: Выделить всё
mpt0: <LSILogic SAS/SATA Adapter> port 0x1000-0x10ff mem 0xb1940000-0xb1943fff,0xb1900000-0xb193ffff irq 16 at device 0.0 on pci13
mpt0: unable to map registers in PIO mode
у вас вполне поддерживаемый набортный SATA/SAS адаптер
для начала БИОС на дефолт скиньте

Скинул БИОС...
И даже на всякий случай "разломал" RAID (думал, что может он по одному диску увидит?).
И всё тоже самое.

Вот новые логи после скидывания БИОС и разломки рейда

dmesg

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE #0: Mon Jul 19 02:36:49 UTC 2010
root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2394.29-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x206c2 Family = 6 Model = 2c Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b17>,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 6442450944 (6144 MB)
avail memory = 6075404288 (5793 MB)
ACPI APIC Table: <INTEL S5520UR >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 18
cpu5 (AP): APIC ID: 19
cpu6 (AP): APIC ID: 20
cpu7 (AP): APIC ID: 21
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL S5520UR> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 28 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 Network Connection version - 1.9.5> port 0x2020-0x203f mem 0xb1a20000-0xb1a3ffff,0xb1a44000-0xb1a47fff irq 40 at device 0.0 on pci1
igb0: Using MSIX interrupts with 5 vectors
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: Ethernet address: 00:15:17:da:d6:54
igb1: <Intel(R) PRO/1000 Network Connection version - 1.9.5> port 0x2000-0x201f mem 0xb1a00000-0xb1a1ffff,0xb1a40000-0xb1a43fff irq 28 at device 0.1 on pci1
igb1: Using MSIX interrupts with 5 vectors
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: Ethernet address: 00:15:17:da:d6:55
pcib2: <ACPI PCI-PCI bridge> irq 24 at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 26 at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 2.0 on pci4
pci5: <PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 4.0 on pci4
pci6: <PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <PCI-PCI bridge> at device 0.0 on pci7
pci8: <PCI bus> on pcib8
pcib9: <PCI-PCI bridge> at device 2.0 on pci8
pci9: <PCI bus> on pcib9
pcib10: <PCI-PCI bridge> at device 4.0 on pci8
pci10: <PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> irq 33 at device 10.0 on pci0
pci12: <ACPI PCI bus> on pcib12
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0x30c0-0x30df irq 19 at device 26.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0x30a0-0x30bf irq 19 at device 26.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0x3080-0x309f irq 19 at device 26.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xb1b21000-0xb1b213ff irq 19 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
pcib13: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci13: <ACPI PCI bus> on pcib13
mpt0: <LSILogic SAS/SATA Adapter> port 0x1000-0x10ff mem 0xb1940000-0xb1943fff,0xb1900000-0xb193ffff irq 16 at device 0.0 on pci13
mpt0: unable to map registers in PIO mode
pcib14: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci14: <ACPI PCI bus> on pcib14
vgapci0: <VGA-compatible display> mem 0xb0000000-0xb0ffffff,0xb1800000-0xb1803fff,0xb1000000-0xb17fffff irq 16 at device 0.0 on pci14
pcib15: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci15: <ACPI PCI bus> on pcib15
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0x3060-0x307f irq 16 at device 29.0 on pci0
uhci3: [ITHREAD]
usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0x3040-0x305f irq 16 at device 29.1 on pci0
uhci4: [ITHREAD]
usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0x3020-0x303f irq 16 at device 29.2 on pci0
uhci5: [ITHREAD]
usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xb1b20000-0xb1b203ff irq 16 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci16: <ACPI PCI bus> on pcib16
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0x3138-0x313f,0x314c-0x314f,0x3130-0x3137,0x3148-0x314b,0x3110-0x311f,0x3100-0x310f irq 18 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel ICH10 SATA300 controller> port 0x3128-0x312f,0x3144-0x3147,0x3120-0x3127,0x3140-0x3143,0x30f0-0x30ff,0x30e0-0x30ef irq 21 at device 31.5 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
acpi_button0: <Sleep Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff on isa0
atkbd: unable to set the command byte.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to set the command byte.
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80e6aa98
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic19: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic21: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic20: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic18: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
ugen2.1: <Intel> at usbus2ugen1.1: <Intel> at usbus1ugen0.1: <Intel> at usbus0ugen5.1: <Intel> at usbus5ugen4.1: <Intel> at usbus4ugen6.1: <Intel> at usbus6ugen3.1: <Intel> at usbus3

uhub0:

<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub5: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen7.2: <vendor 0x05e3> at usbus7
umass0: <vendor 0x05e3 USB Storage, class 0/0, rev 2.00/0.24, addr 2> on usbus7
umass0: SCSI over Bulk-Only; quirks = 0x0000
Root mount waiting for: usbus7
umass0:0:0

Attached to scbus0
ugen2.2: <American Megatrends Inc.> at usbus2
ukbd0: <Keyboard Interface> on usbus2
kbd2 at ukbd0
ums0: <Mouse Interface> on usbus2
ums0: 3 buttons and [Z] coordinates ID=0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
cd0 at umass-sim0 bus 0 scbus0 target 0 lun 0
cd0: <Optiarc DVD RW AD-7700S 1.03> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ugen7.3: <Initio> at usbus7
umass1: <Initio SDRW-08D1S-U, class 0/0, rev 2.00/9.65, addr 3> on usbus7
umass1: 8070i (ATAPI) over Bulk-Only; quirks = 0x0000
Root mount waiting for: usbus7
umass1:1:1

Attached to scbus1
cd1 at umass-sim1 bus 1 scbus1 target 0 lun 0
cd1: <ASUS SDRW-08D1S-U A202> Removable CD-ROM SCSI-0 device
cd1: 40.000MB/s transfers
cd1: cd present [168318 x 2048 byte records]
ugen7.4: <vendor 0x3538> at usbus7
umass2: <vendor 0x3538 USB Mass Storage Device, class 0/0, rev 2.00/1.00, addr 4> on usbus7
umass2: SCSI over Bulk-Only; quirks = 0x0000
ugen5.2: <No brand> at usbus5
ukbd1: <No brand KVM, class 0/0, rev 1.10/0.00, addr 2> on usbus5
kbd3 at ukbd1
ums1: <No brand KVM, class 0/0, rev 1.10/0.00, addr 2> on usbus5
ums1: 5 buttons and [XYZ] coordinates ID=1
umass2:2:2

Attached to scbus2
da0 at umass-sim2 bus 2 scbus2 target 0 lun 0
da0: <Generic USB Flash Disk 0.00> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 984MB (2015232 512 byte sectors: 64H 32S/T 984C)
GEOM: da0: partition 1 does not start on a track boundary.
GEOM: da0: partition 1 does not end on a track boundary.
Trying to mount root from ufs:/dev/md0

pciconf -lv

hostb0@pci0:0:0:0: class=0x060000 card=0x34de8086 chip=0x34068086 rev=0x22 hdr=0x00
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x34de8086 chip=0x34088086 rev=0x22 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:3:0: class=0x060400 card=0x34de8086 chip=0x340a8086 rev=0x22 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:5:0: class=0x060400 card=0x34de8086 chip=0x340c8086 rev=0x22 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib7@pci0:0:7:0: class=0x060400 card=0x34de8086 chip=0x340e8086 rev=0x22 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib11@pci0:0:9:0: class=0x060400 card=0x34de8086 chip=0x34108086 rev=0x22 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib12@pci0:0:10:0: class=0x060400 card=0x34de8086 chip=0x34118086 rev=0x22 hdr=0x01
class = bridge
subclass = PCI-PCI
none0@pci0:0:16:0: class=0x080000 card=0x00de0086 chip=0x34258086 rev=0x22 hdr=0x00
class = base peripheral
subclass = interrupt controller
none1@pci0:0:16:1: class=0x080000 card=0x00de0086 chip=0x34268086 rev=0x22 hdr=0x00
class = base peripheral
subclass = interrupt controller
none2@pci0:0:17:0: class=0x080000 card=0x00de0086 chip=0x34278086 rev=0x22 hdr=0x00
class = base peripheral
subclass = interrupt controller
none3@pci0:0:17:1: class=0x080000 card=0x00de0086 chip=0x34288086 rev=0x22 hdr=0x00
class = base peripheral
subclass = interrupt controller
ioapic0@pci0:0:19:0: class=0x080020 card=0x00de0086 chip=0x342d8086 rev=0x22 hdr=0x00
class = base peripheral
subclass = interrupt controller
none4@pci0:0:20:0: class=0x080000 card=0x00de0086 chip=0x342e8086 rev=0x22 hdr=0x00
class = base peripheral
subclass = interrupt controller
none5@pci0:0:20:1: class=0x080000 card=0x00de0086 chip=0x34228086 rev=0x22 hdr=0x00
class = base peripheral
subclass = interrupt controller
none6@pci0:0:20:2: class=0x080000 card=0x00de0086 chip=0x34238086 rev=0x22 hdr=0x00
class = base peripheral
subclass = interrupt controller
none7@pci0:0:20:3: class=0x080000 card=0x00de0086 chip=0x34388086 rev=0x22 hdr=0x00
class = base peripheral
subclass = interrupt controller
ioapic1@pci0:0:21:0: class=0x080020 card=0x00de0086 chip=0x342f8086 rev=0x22 hdr=0x00
class = base peripheral
subclass = interrupt controller
none8@pci0:0:22:0: class=0x088000 card=0x34de8086 chip=0x34308086 rev=0x22 hdr=0x00
class = base peripheral
none9@pci0:0:22:1: class=0x088000 card=0x34de8086 chip=0x34318086 rev=0x22 hdr=0x00
class = base peripheral
none10@pci0:0:22:2: class=0x088000 card=0x34de8086 chip=0x34328086 rev=0x22 hdr=0x00
class = base peripheral
none11@pci0:0:22:3: class=0x088000 card=0x34de8086 chip=0x34338086 rev=0x22 hdr=0x00
class = base peripheral
none12@pci0:0:22:4: class=0x088000 card=0x34de8086 chip=0x34298086 rev=0x22 hdr=0x00
class = base peripheral
none13@pci0:0:22:5: class=0x088000 card=0x34de8086 chip=0x342a8086 rev=0x22 hdr=0x00
class = base peripheral
none14@pci0:0:22:6: class=0x088000 card=0x34de8086 chip=0x342b8086 rev=0x22 hdr=0x00
class = base peripheral
none15@pci0:0:22:7: class=0x088000 card=0x34de8086 chip=0x342c8086 rev=0x22 hdr=0x00
class = base peripheral
uhci0@pci0:0:26:0: class=0x0c0300 card=0x34de8086 chip=0x3a378086 rev=0x00 hdr=0x00
class = serial bus
subclass = USB
uhci1@pci0:0:26:1: class=0x0c0300 card=0x34de8086 chip=0x3a388086 rev=0x00 hdr=0x00
class = serial bus
subclass = USB
uhci2@pci0:0:26:2: class=0x0c0300 card=0x34de8086 chip=0x3a398086 rev=0x00 hdr=0x00
class = serial bus
subclass = USB
ehci0@pci0:0:26:7: class=0x0c0320 card=0x34de8086 chip=0x3a3c8086 rev=0x00 hdr=0x00
class = serial bus
subclass = USB
pcib13@pci0:0:28:0: class=0x060400 card=0x34de8086 chip=0x3a408086 rev=0x00 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib14@pci0:0:28:4: class=0x060400 card=0x34de8086 chip=0x3a488086 rev=0x00 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib15@pci0:0:28:5: class=0x060400 card=0x34de8086 chip=0x3a4a8086 rev=0x00 hdr=0x01
class = bridge
subclass = PCI-PCI
uhci3@pci0:0:29:0: class=0x0c0300 card=0x34de8086 chip=0x3a348086 rev=0x00 hdr=0x00
class = serial bus
subclass = USB
uhci4@pci0:0:29:1: class=0x0c0300 card=0x34de8086 chip=0x3a358086 rev=0x00 hdr=0x00
class = serial bus
subclass = USB
uhci5@pci0:0:29:2: class=0x0c0300 card=0x34de8086 chip=0x3a368086 rev=0x00 hdr=0x00
class = serial bus
subclass = USB
ehci1@pci0:0:29:7: class=0x0c0320 card=0x34de8086 chip=0x3a3a8086 rev=0x00 hdr=0x00
class = serial bus
subclass = USB
pcib16@pci0:0:30:0: class=0x060401 card=0x34de8086 chip=0x244e8086 rev=0x90 hdr=0x01
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x34de8086 chip=0x3a168086 rev=0x00 hdr=0x00
class = bridge
subclass = PCI-ISA
atapci0@pci0:0:31:2: class=0x01018f card=0x34de8086 chip=0x3a208086 rev=0x00 hdr=0x00
class = mass storage
subclass = ATA
none16@pci0:0:31:3: class=0x0c0500 card=0x34de8086 chip=0x3a308086 rev=0x00 hdr=0x00
class = serial bus
subclass = SMBus
atapci1@pci0:0:31:5: class=0x010185 card=0x34de8086 chip=0x3a268086 rev=0x00 hdr=0x00
class = mass storage
subclass = ATA
igb0@pci0:1:0:0: class=0x020000 card=0x34de8086 chip=0x10a78086 rev=0x02 hdr=0x00
class = network
subclass = ethernet
igb1@pci0:1:0:1: class=0x020000 card=0x34de8086 chip=0x10a78086 rev=0x02 hdr=0x00
class = network
subclass = ethernet
pcib4@pci0:3:0:0: class=0x060400 card=0x00000000 chip=0x806a111d rev=0x02 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib5@pci0:4:2:0: class=0x060400 card=0x00000000 chip=0x806a111d rev=0x02 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib6@pci0:4:4:0: class=0x060400 card=0x00000000 chip=0x806a111d rev=0x02 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib8@pci0:7:0:0: class=0x060400 card=0x00000000 chip=0x806a111d rev=0x02 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib9@pci0:8:2:0: class=0x060400 card=0x00000000 chip=0x806a111d rev=0x02 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib10@pci0:8:4:0: class=0x060400 card=0x00000000 chip=0x806a111d rev=0x02 hdr=0x01
class = bridge
subclass = PCI-PCI
mpt0@pci0:13:0:0: class=0x010000 card=0x35058086 chip=0x00621000 rev=0x04 hdr=0x00
class = mass storage
subclass = SCSI
vgapci0@pci0:14:0:0: class=0x030000 card=0x01018086 chip=0x0522102b rev=0x02 hdr=0x00
class = display
subclass = VGA

Добавлено: **2011-06-08 9:32:11**

Чорт побери.
Наткнулся на вашем форуме вот на такую статью - http://forum.lissyara.su/viewtopic.php?f=5&t=31694
(посмотрите, пожалуйста, последний пост).

Конечно же, "таблетку" мы не покупали.
Может быть проблема именно в этом?
Тогда почему винда видит рейд? Да и линукс тоже.

Добавлено: **2011-06-10 21:40:15**

софтверный, видит

Добавлено: **2011-06-14 8:22:48**

Благодарю, за ответы, коллеги.
Попробую вариант с таблеткой (и отпишусь по свершению оного).

В завершение, прошу вас таки посоветовать "нормальный" RAID-контроллер (уровень 1 или 5, под серверные платформы, устанавливаемый в 1U или 2U), с которым у FreeBSD 8.х не будет проблем.
Или может быть действительно лучше использовать RAID-массив построенный средствами самой FreeBSD (gmirror)?

Добавлено: **2011-06-14 23:59:51**

3ware

Добавлено: **2011-06-15 17:01:53**

superwk4444 писал(а):Благодарю, за ответы, коллеги.
Попробую вариант с таблеткой (и отпишусь по свершению оного).

В завершение, прошу вас таки посоветовать "нормальный" RAID-контроллер (уровень 1 или 5, под серверные платформы, устанавливаемый в 1U или 2U), с которым у FreeBSD 8.х не будет проблем.
Или может быть действительно лучше использовать RAID-массив построенный средствами самой FreeBSD (gmirror)?

Софтверный RAID будет лучше.
Если средствами ZFS строить отказоустойчивое хранилище на сервере, то потребуется минимум 4 ГБ ОЗУ на каждый пул и минимум 8 ГБ на RAID-Z1(2).
Если использовать GEOM, то накладных расходов на память не будет, зато потребуется больше дисков, так как GEOM не умеет RAID-5 — придётся создавать RAID-10. (GEOM RAID-5 сейчас в коллекции портов, а не в самой системе, поэтому гарантии качество его работы не такие, как у самой системы.)

forum.lissyara.su

FreeBSD 8 & RAID

FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID

Re: FreeBSD 8 & RAID