Страница 1 из 1

Множественные ошибки диска FreeBSD 8.2

Добавлено: 2012-03-17 1:28:34
Евгений
Последние 2 недели периодически падала система с непонятной ошибкой... не удавалось отследить, в логах пусто. Как позже оказалось - сам ребутился многократно, а иногда "вешался" при падении.
Последние критические ошибки были такого рода:

Код: Выделить всё

ata2: port is not ready (timeout 15000ms) tfd = 00000080
ata2: hardware reset timeout
g_vfs_done():ad4s1e[WRITE(offset=589728890880, length=32768)]unknown: error = 6
TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=112330255
/usr: goterror 6 while accessing filesystem
panic: softdep_deallocate_dependencies: unrecovered I/O error
cpuid = 6
Uptime: 3h41m20s
Physical memory: 8125 MB
Dumping 1092 MB:
а сейчас даже после fsck -y в single mode и перезагрузки при сохраняющейся (но тормозной) работоспособности валятся на экран множественные ошибки:

Код: Выделить всё

ad4: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=40<UNCORRECTABLE> LBA=1368645711
g_vfs_done():ad4s1e[READ(offset=583708704768, length=16384)]error = 5
читал похожие темы про возможные проблемы с кабелем - кабели перетыкали, контроллером - он вроде интеловский, винтом - но он ВД, а не сигейт...
поддержка проверяла полностью диски неделю назад, "всё тип-топ" было сказано. Куда копать? Что делать? Буду благодарен любой подсказке...

Код: Выделить всё

# smartctl -a /dev/ad4
smartctl 5.42 2011-10-20 r3458 [FreeBSD 8.2-RELEASE amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Blue Serial ATA
Device Model:     WDC WD7500AALX-009BA0
Serial Number:    WD-WCATR6978064
LU WWN Device Id: 5 0014ee 2b06fb4b5
Firmware Version: 15.01H15
User Capacity:    750,156,374,016 bytes [750 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Fri Mar 16 21:36:47 2012 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (12960) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 151) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x3037) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   199   199   051    Pre-fail  Always       -       3080
  3 Spin_Up_Time            0x0027   219   177   021    Pre-fail  Always       -       2050
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       17
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       852
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       15
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       13
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       3
194 Temperature_Celsius     0x0022   115   111   000    Old_age   Always       -       32
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       2
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       48

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%       725         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Код: Выделить всё

FreeBSD simplehost.com 8.2-RELEASE FreeBSD 8.2-RELEASE #1: Fri Jul 29 00:22:53 UTC 2011     root@simplehost.com:/usr/obj/usr/src/sys/HOST  amd64

Re: Множественные ошибки диска FreeBSD 8.2

Добавлено: 2012-03-17 11:46:28
Alex Keda
диск меняйте

Re: Множественные ошибки диска FreeBSD 8.2

Добавлено: 2012-03-17 12:23:54
Евгений
понятно. спасибо.
а какой параметр из отчета smartctl может указывать на проблемы?

Re: Множественные ошибки диска FreeBSD 8.2

Добавлено: 2012-03-17 12:29:23
GhOsT_MZ

Код: Выделить всё

1 Raw_Read_Error_Rate     0x002f   199   199   051    Pre-fail  Always       -       3080
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       2
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       48

Re: Множественные ошибки диска FreeBSD 8.2

Добавлено: 2012-03-17 15:14:26
Евгений
Спасибо.