Чем глубже в песке твоя голова - тем беззащитнее жопа
https://forum.lissyara.su/
Я бы не был так категоричен, но именно этот контроллер нужно конечно либо смотреть вживую, либо гуглить но без опять же вживую посмотренного pciconf думаю это будет не тривиально.Electronik писал(а):Встроенный в южный мост софтовый RAID поддерживается только в Windows. Во все остальных ОС (Linux,FreeBSD,MacOS) RAID не поддерживается.
Я уже с ними сталкивался. Если еще на чипсетах 5-ой серии даже можно было из биоса управлять рэйдом, то с 6-ой версии делается всё из под винды. А при начале установки, в бсд и лине, даже при включённом режиме RAID, все равно видится как 2 независимых диска. Да и gmirror будет понадёжнее.Я бы не был так категоричен
Код: Выделить всё
# pciconf -l
hostb0@pci0:0:0:0: class=0x060000 card=0x77581462 chip=0x01508086 rev=0x09 hdr=0x00
vgapci0@pci0:0:2:0: class=0x030000 card=0x21111462 chip=0x01528086 rev=0x09 hdr=0x00
xhci0@pci0:0:20:0: class=0x0c0330 card=0x77581462 chip=0x1e318086 rev=0x04 hdr=0x00
none0@pci0:0:22:0: class=0x078000 card=0x77581462 chip=0x1e3a8086 rev=0x04 hdr=0x00
ehci0@pci0:0:26:0: class=0x0c0320 card=0x77581462 chip=0x1e2d8086 rev=0x04 hdr=0x00
hdac0@pci0:0:27:0: class=0x040300 card=0xf7581462 chip=0x1e208086 rev=0x04 hdr=0x00
pcib1@pci0:0:28:0: class=0x060400 card=0x77581462 chip=0x1e108086 rev=0xc4 hdr=0x01
pcib2@pci0:0:28:1: class=0x060400 card=0x77581462 chip=0x1e128086 rev=0xc4 hdr=0x01
pcib3@pci0:0:28:3: class=0x060401 card=0x77581462 chip=0x244e8086 rev=0xc4 hdr=0x01
ehci1@pci0:0:29:0: class=0x0c0320 card=0x77581462 chip=0x1e268086 rev=0x04 hdr=0x00
isab0@pci0:0:31:0: class=0x060100 card=0x77581462 chip=0x1e448086 rev=0x04 hdr=0x00
ahci0@pci0:0:31:2: class=0x010400 card=0x77581462 chip=0x28228086 rev=0x04 hdr=0x00
none1@pci0:0:31:3: class=0x0c0500 card=0x77581462 chip=0x1e228086 rev=0x04 hdr=0x00
re0@pci0:2:0:0: class=0x020000 card=0x77581462 chip=0x816810ec rev=0x06 hdr=0x00
pcib4@pci0:3:0:0: class=0x060400 card=0x77581462 chip=0x10801b21 rev=0x03 hdr=0x01
Код: Выделить всё
# dmesg
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-RELEASE #0 r260789: Thu Jan 16 22:34:59 UTC 2014
root@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: Intel(R) Core(TM) i3-3240 CPU @ 3.40GHz (3400.10-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x306a9 Family = 0x6 Model = 0x3a Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x3d9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Standard Extended Features=0x281<GSFSBASE,SMEP,ENHMOVSB>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3994984448 (3809 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
acpi0: reservation of 67, 1 (4) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <IvyBridge desktop GT1 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7d00000-0xf7d0ffff irq 16 at device 20.0 on pci0
xhci0: 32 byte context size.
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7d17000-0xf7d173ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel Panther Point HDA Controller> mem 0xf7d10000-0xf7d13fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf7c04000-0xf7c04fff,0xf7c00000-0xf7c03fff irq 17 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: d4:3d:7e:d8:02:d1
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7d16000-0xf7d163ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8 AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7d15000-0xf7d157ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0
hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen2.1: <Intel> at usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <Intel> at usbus1
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD2000F9YZ-09N20L0 01.01A01> ATA-8 SATA 3.x device
ada0: Serial Number WD-WCC1P0522988
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD2000F9YZ-09N20L0 01.01A01> ATA-8 SATA 3.x device
ada1: Serial Number WD-WCC1P0486375
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
GEOM_RAID: Intel-6271fa1b: Array Intel-6271fa1b created.
GEOM_RAID: Intel-6271fa1b: Disk ada0 state changed from NONE to ACTIVE.
GEOM_RAID: Intel-6271fa1b: Subdisk mirror:0-ada0 state changed from NONE to ACTIVE.
GEOM_RAID: Intel-6271fa1b: Disk ada1 state changed from NONE to ACTIVE.
GEOM_RAID: Intel-6271fa1b: Subdisk mirror:1-ada1 state changed from NONE to REBUILD.
GEOM_RAID: Intel-6271fa1b: Array started.
GEOM_RAID: Intel-6271fa1b: Subdisk mirror:1-ada1 rebuild start at 449270775808.
GEOM_RAID: Intel-6271fa1b: Volume mirror state changed from STARTING to DEGRADED.
GEOM_RAID: Intel-6271fa1b: Provider raid/r0 for volume mirror created.
Netvsc initializing... SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1700047572 Hz quality 1000
Root mount waiting for: usbus2 usbus1 usbus0
uhub0: 8 ports with 8 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen1.2: <vendor 0x8087> at usbus1
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
Root mount waiting for: usbus2 usbus1
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/raid/r0p2 [rw]...
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...Syncing disks, vnodes remaining...3 2 1 0 0 done
All buffers synced.
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-RELEASE #0 r260789: Thu Jan 16 22:34:59 UTC 2014
root@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: Intel(R) Core(TM) i3-3240 CPU @ 3.40GHz (3400.10-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x306a9 Family = 0x6 Model = 0x3a Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x3d9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Standard Extended Features=0x281<GSFSBASE,SMEP,ENHMOVSB>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3994984448 (3809 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
acpi0: reservation of 67, 1 (4) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <IvyBridge desktop GT1 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7d00000-0xf7d0ffff irq 16 at device 20.0 on pci0
xhci0: 32 byte context size.
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7d17000-0xf7d173ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel Panther Point HDA Controller> mem 0xf7d10000-0xf7d13fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf7c04000-0xf7c04fff,0xf7c00000-0xf7c03fff irq 17 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: d4:3d:7e:d8:02:d1
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7d16000-0xf7d163ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8 AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7d15000-0xf7d157ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0
hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <Intel> at usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <0x8086> at usbus0
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD2000F9YZ-09N20L0 01.01A01> ATA-8 SATA 3.x device
ada0: Serial Number WD-WCC1P0522988
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD2000F9YZ-09N20L0 01.01A01> ATA-8 SATA 3.x device
ada1: Serial Number WD-WCC1P0486375
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
GEOM_RAID: Intel-6271fa1b: Array Intel-6271fa1b created.
GEOM_RAID: Intel-6271fa1b: Disk ada0 state changed from NONE to ACTIVE.
GEOM_RAID: Intel-6271fa1b: Subdisk mirror:0-ada0 state changed from NONE to ACTIVE.
GEOM_RAID: Intel-6271fa1b: Disk ada1 state changed from NONE to ACTIVE.
GEOM_RAID: Intel-6271fa1b: Subdisk mirror:1-ada1 state changed from NONE to REBUILD.
GEOM_RAID: Intel-6271fa1b: Array started.
GEOM_RAID: Intel-6271fa1b: Subdisk mirror:1-ada1 rebuild start at 517005639680.
GEOM_RAID: Intel-6271fa1b: Volume mirror state changed from STARTING to DEGRADED.
GEOM_RAID: Intel-6271fa1b: Provider raid/r0 for volume mirror created.
Netvsc initializing... SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1700051276 Hz quality 1000
Root mount waiting for: usbus2 usbus1 usbus0
uhub2: 8 ports with 8 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen1.2: <vendor 0x8087> at usbus1
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
Root mount waiting for: usbus2 usbus1
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/raid/r0p2 [rw]...