forum.lissyara.su

Пока противник рисует карты наступления, мы меняем ландшафты, причём вручную
https://forum.lissyara.su/

FreeBSD и 2 SRCS28X

https://forum.lissyara.su/viewtopic.php?f=5&t=7699

Страница 1 из 2

FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 12:19:24
ag1584
Добрый день!
есть проблема с инсталляцией FreeBSD 7 на сервер

2 х Intel Xeon 2,8
мат плата Intel SE7520AF2 BIOS P12-113
раид контоллер SRCS28X Firmware 815C with BBU - 2 штуки
16 дисков по 750ГБ каждый

через утилиту (Ctrl-G)все диски видны
пока сделал 2 логических диска чтобы не путаться
при загрузке лодера с установочного диска FreeBSD видит что в биосе есть два диска
сама инсталляция не видит контроллера и дисков

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 12:25:01
Alex Keda
марка чипа какая?
========
не надо покупать недоконтроллеры....

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 12:31:44
hizel
гугел врет
Operating Systems Supported
Microsoft Windows Server 2003 Enterprise Edition • Microsoft Windows 2000 Advanced Server • Novell NetWare • Red Hat Enterprise Linux • SCO OpenServer • SCO UnixWare • SUSE LINUX Professional • SUSE LINUX Enterprise Server
FreeBSD тю тю =(
рядом
Adaptec SAS RAID 4800SAS/256MB ROHS SGL EN - 2185700-R (Storage RAID Systems)
Operating Systems Supported
Windows 2000, SP4 (Professional, Advanced Server, Server, Enterprise) - 32bit only • Windows XP, SP1 and SP2 (Home Edition and Professional) - 32bit and 64bit • Windows Server 2003, OOB and SP1 (Web, Standard, Enterprise) - 32bit and 64bit • Netware 6.5 • FreeBSD 5.3 and 5.4 • Red Hat Enterprise Linux 3 - 32bit and 64bit • Red Hat Enterprise Linux 4 - 32bit and 64bit • SuSE Enterprise Linux 8 - 32bit and 64bit • SuSE Enterprise Linux 9 - 32bit and 64bit
в два раза дороже =(

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 12:38:07
ag1584
lissyara писал(а):марка чипа какая?
========
не надо покупать недоконтроллеры....
марка чипа под радиатором, а он ещё находится на гарантии
как ещё можно посмотреть, на intel.com не нашел

покупал не я, такой достался

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 12:40:56
hizel
судя по саппартед ос, вам в сторону линукса придется смотреть :)

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 12:41:15
ag1584
hizel писал(а):гугел врет
Operating Systems Supported
Microsoft Windows Server 2003 Enterprise Edition • Microsoft Windows 2000 Advanced Server • Novell NetWare • Red Hat Enterprise Linux • SCO OpenServer • SCO UnixWare • SUSE LINUX Professional • SUSE LINUX Enterprise Server
FreeBSD тю тю =(
рядом
под FreeBSD этот контроллер поддерживается драйвером amr (LSI MegaRAID SATA 300-8x)
вообщем-то там и стояла FreeBSD, с отключенным acpi, и из-за этого из 2 процессоров работал только один, да и засрали машину

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 13:42:32
Alex Keda
а. тогда если его нет в дефолтовом ядре - руками на старте модуль подгрузить.
========
или подрубить диск в другой контроллер на него систему и водрузить

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 13:50:15
ag1584
lissyara писал(а):а. тогда если его нет в дефолтовом ядре - руками на старте модуль подгрузить.
========
или подрубить диск в другой контроллер на него систему и водрузить
вроде делал

при загрузке с диска ESC to bootloader promt
load amr
boot

пишет failed to register pci\amr
может я чего забыл ?

В другой контроллер не получится
у меня тут зеркало из двух дисков и 2 логических диска на нем

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 13:54:35
Alex Keda
а какая фря стояла и кто ставил?

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 14:02:47
hizel
посмотрел CVS freebsd
amr по умолчанию в ядре 7-STABLE =/

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 14:04:22
ag1584
lissyara писал(а):а какая фря стояла и кто ставил?
стояла 6.1, я же её и ставил для тестов и разработчиков
утанавливал гемморойно
на матери 3 PCI-X слота (2 PCI-X 133 и один PCI-X 100 )
чтобы проинсталить вставлял одну карту в PCI-X 100 другую в PCI-X 133
при этом приходилось выключать в ядре acpi, иначе контроллер который воткнут в PCI-X 133 не виделся
видимо от выключения acpi терялся второй проц
для тестов вполне годилась конфигурация
сейчас же это будет рабочий сервер, поэтому такой кривоты не хочется
тем более что туда ещё 3 контроллер будет позже воткнут от стойки DELL MD1000
до меня тоже ставили фряху 6.0, а этих людей кто её ставил не знаю

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 14:04:41
Alex Keda
тада вываливаться в консоли и смотреть чё там и как надетектилось...

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 14:06:11
Alex Keda
без ацпи второгоп роца не будет...
=====
в сафе моде как грузиться - нормально или нет?
и лучше ставь тогда 6-ку... коли она вставала боле-мене нормально.

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 14:09:38
ag1584
lissyara писал(а):без ацпи второгоп роца не будет...
=====
в сафе моде как грузиться - нормально или нет?
и лучше ставь тогда 6-ку... коли она вставала боле-мене нормально.
в safe mode тоже самое

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 14:11:57
Alex Keda
руками разруливать ввод-вывод прерывания не пробовал?
и вообще - загрузи/поставь хоть чёнить и дай dmesg/pciconv -lv
дмесг можно даже из вербозной загрузки

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 14:20:35
ag1584
lissyara писал(а):руками разруливать ввод-вывод прерывания не пробовал?
и вообще - загрузи/поставь хоть чёнить и дай dmesg/pciconv -lv
дмесг можно даже из вербозной загрузки
попробую 7.0-RELEASE-amd64-livefs.iso, писать буду долго ибо не смогу скопировать

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 15:00:51
Alex Keda
ag1584 писал(а):
lissyara писал(а):руками разруливать ввод-вывод прерывания не пробовал?
и вообще - загрузи/поставь хоть чёнить и дай dmesg/pciconv -lv
дмесг можно даже из вербозной загрузки
попробую 7.0-RELEASE-amd64-livefs.iso, писать буду долго ибо не смогу скопировать
собственно - запустить ssh или по ftp/ssh/smb/хер-знает-чему кто запрещает передать?
или сказать как сохранить вывод команды в файл?

Код: Выделить всё

dmesg > file1.txt
pciconf -lv > file2.txt

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 15:07:22
ag1584
lissyara писал(а):
ag1584 писал(а):
lissyara писал(а):руками разруливать ввод-вывод прерывания не пробовал?
и вообще - загрузи/поставь хоть чёнить и дай dmesg/pciconv -lv
дмесг можно даже из вербозной загрузки
попробую 7.0-RELEASE-amd64-livefs.iso, писать буду долго ибо не смогу скопировать
собственно - запустить ssh или по ftp/ssh/smb/хер-знает-чему кто запрещает передать?
или сказать как сохранить вывод команды в файл?

Код: Выделить всё

dmesg > file1.txt
pciconf -lv > file2.txt

Код: Выделить всё

hostb0@pci0:0:0:0:	class=0x060000	card=0x341a8086	chip=0x35908086 rev=0x0c hdr=0x00
		class = bridge
		subclass = HOST-PCI
none0@pci0:0:0:1:	class=0xff0000	card=0x341a8086	chip=0x35918086 rev=0x0c hdr=0x00
none1@pci0:0:1:0:	class=0x088000	card=0x341a8086	chip=0x35948086 rev=0x0c hdr=0x00
		class = base peripheral
pcib1@pci0:0:2:0:	class=0x060400 card=0x000000000 chip=0x35958086 rev=0x0c hdr=0x01
		class = bridge
		subclass = PCI-PCI
pcib4@pci0:0:4:0:	class=0x060400 card=0x000000000 chip=0x35978086 rev=0x0c hdr=0x01
		class = bridge
		subclass = PCI-PCI
pcib5@pci0:0:6:0:	class=0x060400 card=0x000000000 chip=0x35998086 rev=0x0c hdr=0x01
		class = bridge
		subclass = PCI-PCI
pcib6@pci0:0:7:0:	class=0x060400 card=0x000000000 chip=0x359a8086 rev=0x0c hdr=0x01
		class = bridge
		subclass = PCI-PCI
pcib1@pci0:0:30:0:	class=0x060400 card=0x000000000 chip=0x244e8086 rev=0xc2 hdr=0x01
		class = bridge
		subclass = PCI-PCI
isab0@pci0:0:31:0:	class=0x060100 card=0x000000000 chip=0x24d08086 rev=0x02 hdr=0x00
		class = bridge
		subclass = PCI-ISA
atapci0@pci0:0:31:1:	class=0x01018a card=0x344c8086 chip=0x24db8086 rev=0x02 hdr=0x00
		class = mass storage
		subclass = ATA
none2@pci0:0:31:3:	class=0x0c0500 card=0x344c8086 chip=0x24d38086 rev=0x02 hdr=0x00
		class = serial bus
		subclass = SMBus
pcib2@pci0:8:0:0:	class=0x060400 card=0x00000000 chip=0x03298086 rev=0x09 hdr=0x01
		class = bridge
		subclass = PCI-PCI
ioapic0@pci0:8:0:1:	class=0x080020 card=0x341a8086 chip=0x03268086 rev=0x09 hdr=0x00
		class = base peripheral
		subclass = interrupt controller
pcib3@pci0:8:0:2:	class=0x060400 card=0x00000000 chip=0x032a8086 rev=0x09 hdr=0x01
		class = bridge
		subclass = PCI-PCI
ioapic1@pci0:8:0:3:	class=0x080020 card=0x341a8086 chip=0x03278086 rev=0x09 hdr=0x00
		class = base peripheral
		subclass = interrupt controller
em0@pci0:9:4:0:	    class=0x020000 card=0x341a8086 chip=0x10798086 rev=0x03 hdr=0x00
		class = network
		subclass = ethernet
em0@pci0:9:4:1:	    class=0x020000 card=0x341a8086 chip=0x10798086 rev=0x03 hdr=0x00
		class = network
		subclass = ethernet
pcib7@pci0:2:0:0:	class=0x060400 card=0x00000000 chip=0x03308086 rev=0x07 hdr=0x01
		class = brigde
		subclass = PCI-PCI
ioapic2@pci0:2:0:1:	class=0x080020 card=0x341a8086 chip=0x03318086 rev=0x07 hdr=0x00
		class = base peripheral
		subclass = interrupt controller
pcib8@pci0:2:0:2:	class=0x060400 card=0x00000000 chip=0x03328086 rev=0x07 hdr=0x01
		class = brigde
		subclass = PCI-PCI
ioapic3@pci0:2:0:3:	class=0x080020 card=0x341a8086 chip=0x03338086 rev=0x07 hdr=0x00
		class = base peripheral
		subclass = interrupt controller
pcib9@pci0:3:1:0:	class=0x060400 card=0x00000000 chip=0x03358086 rev=0x07 hdr=0x01
		class = brigde
		subclass = PCI-PCI
vgapci0@pci0:1:12:0:	class=0x030000 card=0x341a8086 chip=0x47521002 rev=0x27 hdr=0x00
		class = display
		subclass = VGA

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 15:09:28
ag1584
как с утановочного диска запустить ssh/ftp, если там тока есть консоль Fixit#
я не знаю

PS. торможу я с этим сервером :)

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 15:21:24
ag1584

Код: Выделить всё

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008
    root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80fc8000.
Preloaded mfs_root "/boot/mfsroot" at 0xffffffff80fc81e8.
Calibrating clock(s) ... i8254 clock: 1193109 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2793014679 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.01-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,CX16,xTPR>
  AMD Features=0x20000800<SYSCALL,LM>
  Logical CPUs per core: 2
usable memory = 4277882880 (4079 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x00000000010c6000 - 0x00000000d788bfff, 3598475264 bytes (878534 pages)
0x0000000100000000 - 0x000000011ffeffff, 536805376 bytes (131056 pages)
avail memory  = 4124389376 (3933 MB)
ACPI APIC Table: <A M I  OEMAPIC >
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  6
 cpu3 (AP): APIC ID:  7
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 3
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 4
ACPI: RSDP @ 0x0xf80f0/0x0014 (v  0 ACPIAM)
ACPI: RSDT @ 0x0xdffe0000/0x0034 (v  1 A M I  7520AF20 0x07000614 MSFT 0x00000097)
ACPI: FACP @ 0x0xdffe0200/0x0084 (v  2 A M I  OEMFACP  0x07000614 MSFT 0x00000097)
ACPI: DSDT @ 0x0xdffe0510/0x71A9 (v  1  ALIEF ALIEF113 0x00000113 INTL 0x02002026)
ACPI: FACS @ 0x0xdffef000/0x0040
ACPI: APIC @ 0x0xdffe0390/0x00EC (v  1 A M I  OEMAPIC  0x07000614 MSFT 0x00000097)
ACPI: MCFG @ 0x0xdffe04d0/0x003C (v  1 A M I  OEMMCFG  0x07000614 MSFT 0x00000097)
ACPI: OEMB @ 0x0xdffef040/0x0040 (v  1 A M I  AMI_OEM  0x07000614 MSFT 0x00000097)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec80000
MADT: Found IO APIC ID 10, Interrupt 48 at 0xfec80400
MADT: Found IO APIC ID 11, Interrupt 72 at 0xfec85000
MADT: Found IO APIC ID 12, Interrupt 96 at 0xfec85400
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic6: Routing NMI -> LINT1
lapic6: LINT1 trigger: edge
lapic6: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic7: Routing NMI -> LINT1
lapic7: LINT1 trigger: edge
lapic7: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 5
MADT: Ignoring local NMI routed to ACPI CPU 6
MADT: Ignoring local NMI routed to ACPI CPU 7
MADT: Ignoring local NMI routed to ACPI CPU 8
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
ioapic4 <Version 2.0> irqs 96-119 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18)
acpi0: <A M I 7520AF20> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.EPA0.PXHA.HPCA -> bus 8 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.EPC1.DBSB.HPCA -> bus 2 dev 0 func 2
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IROR -> bus 0 dev 31 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, dff00000 (3) failed
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
AcpiOsDerivePciId: \\_SB_.PCI0.MCH0 -> bus 0 dev 0 func 0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0    5   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
p4tcc3: <CPU Frequency Thermal Control> on cpu3
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x3590, revid=0x0c
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3591, revid=0x0c
	domain=0, bus=0, slot=0, func=1
	class=ff-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3594, revid=0x0c
	domain=0, bus=0, slot=1, func=0
	class=08-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	MSI supports 2 messages
	map[10]: type Memory, range 32, base 0xfcfff000, size 12, memory disabled
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3595, revid=0x0c
	domain=0, bus=0, slot=2, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3597, revid=0x0c
	domain=0, bus=0, slot=4, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3599, revid=0x0c
	domain=0, bus=0, slot=6, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x359a, revid=0x0c
	domain=0, bus=0, slot=7, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x244e, revid=0xc2
	domain=0, bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24d0, revid=0x02
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24db, revid=0x02
	domain=0, bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[20]: type I/O Port, range 32, base 0xfc00, size  4, enabled
	map[24]: type Memory, range 32, base 0, size 10, enabled
found->	vendor=0x8086, dev=0x24d3, revid=0x02
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=255
	map[20]: type I/O Port, range 32, base 0x540, size  5, enabled
pci0: <unknown> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     8
pcib1:   subordinate bus   10
pcib1:   I/O decode        0xe000-0xefff
pcib1:   memory decode     0xfea00000-0xfebfffff
pcib1:   no prefetched decode
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.EPA0 - AE_NOT_FOUND
pci8: <ACPI PCI bus> on pcib1
pci8: domain=0, physical bus=8
found->	vendor=0x8086, dev=0x0329, revid=0x09
	domain=0, bus=8, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
found->	vendor=0x8086, dev=0x0326, revid=0x09
	domain=0, bus=8, slot=0, func=1
	class=08-00-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfeafe000, size 12, enabled
pcib1: requested memory range 0xfeafe000-0xfeafefff: good
found->	vendor=0x8086, dev=0x032a, revid=0x09
	domain=0, bus=8, slot=0, func=2
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
found->	vendor=0x8086, dev=0x0327, revid=0x09
	domain=0, bus=8, slot=0, func=3
	class=08-00-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfeaff000, size 12, enabled
pcib1: requested memory range 0xfeaff000-0xfeafffff: good
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci8
pcib2:   domain            0
pcib2:   secondary bus     10
pcib2:   subordinate bus   10
pcib2:   I/O decode        0x0-0x0
pcib2:   no prefetched decode
pci10: <ACPI PCI bus> on pcib2
pci10: domain=0, physical bus=10
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci8
pcib3:   domain            0
pcib3:   secondary bus     9
pcib3:   subordinate bus   9
pcib3:   I/O decode        0xe000-0xefff
pcib3:   memory decode     0xfeb00000-0xfebfffff
pcib3:   no prefetched decode
pci9: <ACPI PCI bus> on pcib3
pci9: domain=0, physical bus=9
found->	vendor=0x8086, dev=0x1079, revid=0x03
	domain=0, bus=9, slot=4, func=0
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0230, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfeba0000, size 17, enabled
pcib3: requested memory range 0xfeba0000-0xfebbffff: good
pcib1: requested memory range 0xfeba0000-0xfebbffff: good
	map[20]: type I/O Port, range 32, base 0xe880, size  6, enabled
pcib3: requested I/O range 0xe880-0xe8bf: in range
pcib1: requested I/O range 0xe880-0xe8bf: in range
pcib3: matched entry for 9.4.INTA
pcib3: slot 4 INTA hardwired to IRQ 52
found->	vendor=0x8086, dev=0x1079, revid=0x03
	domain=0, bus=9, slot=4, func=1
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0230, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfebe0000, size 17, enabled
pcib3: requested memory range 0xfebe0000-0xfebfffff: good
pcib1: requested memory range 0xfebe0000-0xfebfffff: good
	map[20]: type I/O Port, range 32, base 0xec00, size  6, enabled
pcib3: requested I/O range 0xec00-0xec3f: in range
pcib1: requested I/O range 0xec00-0xec3f: in range
pcib3: matched entry for 9.4.INTB
pcib3: slot 4 INTB hardwired to IRQ 53
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xe880-0xe8bf mem 0xfeba0000-0xfebbffff irq 52 at device 4.0 on pci9
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfeba0000
em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0xe880
em0: bpf attached
em0: Ethernet address: 00:07:e9:32:98:d4
ioapic2: routing intpin 4 (PCI IRQ 52) to vector 49
em0: [FILTER]
em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xec00-0xec3f mem 0xfebe0000-0xfebfffff irq 53 at device 4.1 on pci9
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfebe0000
em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0xec00
em1: bpf attached
em1: Ethernet address: 00:07:e9:32:98:d5
ioapic2: routing intpin 5 (PCI IRQ 53) to vector 50
em1: [FILTER]
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pcib4:   domain            0
pcib4:   secondary bus     7
pcib4:   subordinate bus   7
pcib4:   I/O decode        0x0-0x0
pcib4:   no prefetched decode
pci7: <ACPI PCI bus> on pcib4
pci7: domain=0, physical bus=7
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pcib5:   domain            0
pcib5:   secondary bus     6
pcib5:   subordinate bus   6
pcib5:   I/O decode        0x0-0x0
pcib5:   no prefetched decode
pci6: <ACPI PCI bus> on pcib5
pci6: domain=0, physical bus=6
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 7.0 on pci0
pcib6:   domain            0
pcib6:   secondary bus     2
pcib6:   subordinate bus   5
pcib6:   I/O decode        0x0-0x0
pcib6:   memory decode     0xfe700000-0xfe9fffff
pcib6:   prefetched decode 0xfbf00000-0xfbffffff
pcib6: could not get PCI interrupt routing table for \\_SB_.PCI0.EPC1 - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib6
pci2: domain=0, physical bus=2
found->	vendor=0x8086, dev=0x0330, revid=0x07
	domain=0, bus=2, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
found->	vendor=0x8086, dev=0x0331, revid=0x07
	domain=0, bus=2, slot=0, func=1
	class=08-00-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfe7fe000, size 12, enabled
pcib6: requested memory range 0xfe7fe000-0xfe7fefff: good
found->	vendor=0x8086, dev=0x0332, revid=0x07
	domain=0, bus=2, slot=0, func=2
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
found->	vendor=0x8086, dev=0x0333, revid=0x07
	domain=0, bus=2, slot=0, func=3
	class=08-00-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfe7ff000, size 12, enabled
pcib6: requested memory range 0xfe7ff000-0xfe7fffff: good
pcib7: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pcib7:   domain            0
pcib7:   secondary bus     5
pcib7:   subordinate bus   5
pcib7:   I/O decode        0x0-0x0
pcib7:   no prefetched decode
pci5: <ACPI PCI bus> on pcib7
pci5: domain=0, physical bus=5
pcib8: <ACPI PCI-PCI bridge> at device 0.2 on pci2
pcib8:   domain            0
pcib8:   secondary bus     3
pcib8:   subordinate bus   4
pcib8:   I/O decode        0x0-0x0
pcib8:   memory decode     0xfe800000-0xfe9fffff
pcib8:   prefetched decode 0xfbf00000-0xfbffffff
pci3: <ACPI PCI bus> on pcib8
pci3: domain=0, physical bus=3
found->	vendor=0x8086, dev=0x0335, revid=0x07
	domain=0, bus=3, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0006, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D1 D3  current D0
pcib9: <ACPI PCI-PCI bridge> at device 1.0 on pci3
pcib9:   domain            0
pcib9:   secondary bus     4
pcib9:   subordinate bus   4
pcib9:   I/O decode        0x0-0x0
pcib9:   memory decode     0xfe800000-0xfe9fffff
pcib9:   prefetched decode 0xfbf00000-0xfbffffff
device_attach: pcib9 attach returned 6
pcib10: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib10:   domain            0
pcib10:   secondary bus     1
pcib10:   subordinate bus   1
pcib10:   I/O decode        0xd000-0xdfff
pcib10:   memory decode     0xfd000000-0xfe6fffff
pcib10:   no prefetched decode
pcib10:   Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib10
pci1: domain=0, physical bus=1
found->	vendor=0x1002, dev=0x4752, revid=0x27
	domain=0, bus=1, slot=12, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfd000000, size 24, enabled
pcib10: requested memory range 0xfd000000-0xfdffffff: good
	map[14]: type I/O Port, range 32, base 0xd800, size  8, enabled
pcib10: requested I/O range 0xd800-0xd8ff: in range
	map[18]: type Memory, range 32, base 0xfe6ff000, size 12, enabled
pcib10: requested memory range 0xfe6ff000-0xfe6fffff: good
pcib10: matched entry for 1.12.INTA
pcib10: slot 12 INTA hardwired to IRQ 17
vgapci0: <VGA-compatible display> port 0xd800-0xd8ff mem 0xfd000000-0xfdffffff,0xfe6ff000-0xfe6fffff irq 17 at device 12.0 on pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=01
ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=10 stat1=01 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 53
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 54
sio1: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 56
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model 4D+ Mouse, device ID 8-00, 4 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c8, syncbits:00
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xcd000-0xcdfff,0xce000-0xcefff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 238312 -> 100000
procfs registered
lapic: Divisor 2, Frequency 99750529 hz
Timecounter "TSC" frequency 2793014679 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80bc6c08
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on ICH5 chip
acd0: setting UDMA33 on ICH5 chip
acd0: <QSI CD-RW/DVD-ROM SBW-243/TX09> CDRW drive at ata0 as master
acd0: read 4126KB/s (4126KB/s) write 1720KB/s (1720KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-RW 120mm data disc
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x07000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x06000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 3 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 0
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 12 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 0
ioapic2: Assigning PCI IRQ 52 to local APIC 0
ioapic2: Assigning PCI IRQ 53 to local APIC 0
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_LiveFS.
acd0: FAILURE - READ_BIG HARDWARE ERROR asc=0x3e ascq=0x02 
Trying to mount root from ufs:/dev/md0
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /rescue/init
start_init: trying /stand/sysinstall
em1: Link is up 100 Mbps Full Duplex
em1: Link is Down
em1: Link is up 100 Mbps Full Duplex

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 15:24:05
Alex Keda
чё-то я контроллера в упор не вижу

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 15:32:10
ag1584
lissyara писал(а):чё-то я контроллера в упор не вижу
вот-вот, а он есть
сейчас поставлю в слот PCI-X 100 и выложу dmesg и он там будет
проблема в том что FreeBSD не видит контроллеры когда они стоят в слотах PCI-X 133

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 15:35:52
ag1584
pciconf -lv

Код: Выделить всё

hostb0@pci0:0:0:0:	class=0x060000 card=0x341a8086 chip=0x35908086 rev=0x0c hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
none0@pci0:0:0:1:	class=0xff0000 card=0x341a8086 chip=0x35918086 rev=0x0c hdr=0x00
none1@pci0:0:1:0:	class=0x088000 card=0x341a8086 chip=0x35948086 rev=0x0c hdr=0x00
    class      = base peripheral
pcib1@pci0:0:2:0:	class=0x060400 card=0x00000000 chip=0x35958086 rev=0x0c hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib5@pci0:0:4:0:	class=0x060400 card=0x00000000 chip=0x35978086 rev=0x0c hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib6@pci0:0:6:0:	class=0x060400 card=0x00000000 chip=0x35998086 rev=0x0c hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib7@pci0:0:7:0:	class=0x060400 card=0x00000000 chip=0x359a8086 rev=0x0c hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib10@pci0:0:30:0:	class=0x060400 card=0x00000000 chip=0x244e8086 rev=0xc2 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:	class=0x060100 card=0x00000000 chip=0x24d08086 rev=0x02 hdr=0x00
    class      = bridge
    subclass   = PCI-ISA
atapci0@pci0:0:31:1:	class=0x01018a card=0x344c8086 chip=0x24db8086 rev=0x02 hdr=0x00
    class      = mass storage
    subclass   = ATA
none2@pci0:0:31:3:	class=0x0c0500 card=0x344c8086 chip=0x24d38086 rev=0x02 hdr=0x00
    class      = serial bus
    subclass   = SMBus
pcib2@pci0:7:0:0:	class=0x060400 card=0x00000000 chip=0x03298086 rev=0x09 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
ioapic0@pci0:7:0:1:	class=0x080020 card=0x341a8086 chip=0x03268086 rev=0x09 hdr=0x00
    class      = base peripheral
    subclass   = interrupt controller
pcib3@pci0:7:0:2:	class=0x060400 card=0x00000000 chip=0x032a8086 rev=0x09 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
ioapic1@pci0:7:0:3:	class=0x080020 card=0x341a8086 chip=0x03278086 rev=0x09 hdr=0x00
    class      = base peripheral
    subclass   = interrupt controller
pcib4@pci0:8:1:0:	class=0x060400 card=0x00000000 chip=0x03358086 rev=0x07 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
em0@pci0:8:4:0:	class=0x020000 card=0x341a8086 chip=0x10798086 rev=0x03 hdr=0x00
    class      = network
    subclass   = ethernet
em1@pci0:8:4:1:	class=0x020000 card=0x341a8086 chip=0x10798086 rev=0x03 hdr=0x00
    class      = network
    subclass   = ethernet
amr0@pci0:9:14:0:	class=0x010400 card=0x30088086 chip=0x04091000 rev=0x07 hdr=0x00
    class      = mass storage
    subclass   = RAID
pcib8@pci0:2:0:0:	class=0x060400 card=0x00000000 chip=0x03308086 rev=0x07 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
ioapic2@pci0:2:0:1:	class=0x080020 card=0x341a8086 chip=0x03318086 rev=0x07 hdr=0x00
    class      = base peripheral
    subclass   = interrupt controller
pcib9@pci0:2:0:2:	class=0x060400 card=0x00000000 chip=0x03328086 rev=0x07 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
ioapic3@pci0:2:0:3:	class=0x080020 card=0x341a8086 chip=0x03338086 rev=0x07 hdr=0x00
    class      = base peripheral
    subclass   = interrupt controller
vgapci0@pci0:1:12:0:	class=0x030000 card=0x341a8086 chip=0x47521002 rev=0x27 hdr=0x00
    class      = display
    subclass   = VGA
dmesg

Код: Выделить всё

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008
    root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80fc8000.
Preloaded mfs_root "/boot/mfsroot" at 0xffffffff80fc81e8.
Calibrating clock(s) ... i8254 clock: 1193113 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2793015582 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.02-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,CX16,xTPR>
  AMD Features=0x20000800<SYSCALL,LM>
  Logical CPUs per core: 2
usable memory = 4277882880 (4079 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x00000000010c6000 - 0x00000000d788bfff, 3598475264 bytes (878534 pages)
0x0000000100000000 - 0x000000011ffeffff, 536805376 bytes (131056 pages)
avail memory  = 4124389376 (3933 MB)
ACPI APIC Table: <A M I  OEMAPIC >
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  6
 cpu3 (AP): APIC ID:  7
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 3
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 4
ACPI: RSDP @ 0x0xf80f0/0x0014 (v  0 ACPIAM)
ACPI: RSDT @ 0x0xdffe0000/0x0034 (v  1 A M I  7520AF20 0x07000614 MSFT 0x00000097)
ACPI: FACP @ 0x0xdffe0200/0x0084 (v  2 A M I  OEMFACP  0x07000614 MSFT 0x00000097)
ACPI: DSDT @ 0x0xdffe0510/0x71A9 (v  1  ALIEF ALIEF113 0x00000113 INTL 0x02002026)
ACPI: FACS @ 0x0xdffef000/0x0040
ACPI: APIC @ 0x0xdffe0390/0x00EC (v  1 A M I  OEMAPIC  0x07000614 MSFT 0x00000097)
ACPI: MCFG @ 0x0xdffe04d0/0x003C (v  1 A M I  OEMMCFG  0x07000614 MSFT 0x00000097)
ACPI: OEMB @ 0x0xdffef040/0x0040 (v  1 A M I  AMI_OEM  0x07000614 MSFT 0x00000097)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec80000
MADT: Found IO APIC ID 10, Interrupt 48 at 0xfec80400
MADT: Found IO APIC ID 11, Interrupt 72 at 0xfec85000
MADT: Found IO APIC ID 12, Interrupt 96 at 0xfec85400
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic6: Routing NMI -> LINT1
lapic6: LINT1 trigger: edge
lapic6: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic7: Routing NMI -> LINT1
lapic7: LINT1 trigger: edge
lapic7: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 5
MADT: Ignoring local NMI routed to ACPI CPU 6
MADT: Ignoring local NMI routed to ACPI CPU 7
MADT: Ignoring local NMI routed to ACPI CPU 8
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
ioapic4 <Version 2.0> irqs 96-119 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18)
acpi0: <A M I 7520AF20> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.EPA0.PXHA.HPCA -> bus 7 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.EPC1.DBSB.HPCA -> bus 2 dev 0 func 2
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IROR -> bus 0 dev 31 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, dff00000 (3) failed
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
AcpiOsDerivePciId: \\_SB_.PCI0.MCH0 -> bus 0 dev 0 func 0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0    5   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
p4tcc3: <CPU Frequency Thermal Control> on cpu3
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x3590, revid=0x0c
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3591, revid=0x0c
	domain=0, bus=0, slot=0, func=1
	class=ff-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3594, revid=0x0c
	domain=0, bus=0, slot=1, func=0
	class=08-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	MSI supports 2 messages
	map[10]: type Memory, range 32, base 0xfcfff000, size 12, memory disabled
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3595, revid=0x0c
	domain=0, bus=0, slot=2, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3597, revid=0x0c
	domain=0, bus=0, slot=4, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3599, revid=0x0c
	domain=0, bus=0, slot=6, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x359a, revid=0x0c
	domain=0, bus=0, slot=7, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x244e, revid=0xc2
	domain=0, bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24d0, revid=0x02
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24db, revid=0x02
	domain=0, bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[20]: type I/O Port, range 32, base 0xfc00, size  4, enabled
	map[24]: type Memory, range 32, base 0, size 10, enabled
found->	vendor=0x8086, dev=0x24d3, revid=0x02
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=255
	map[20]: type I/O Port, range 32, base 0x540, size  5, enabled
pci0: <unknown> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     7
pcib1:   subordinate bus   10
pcib1:   I/O decode        0xe000-0xefff
pcib1:   memory decode     0xfe800000-0xfebfffff
pcib1:   prefetched decode 0xfbf00000-0xfbffffff
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.EPA0 - AE_NOT_FOUND
pci7: <ACPI PCI bus> on pcib1
pci7: domain=0, physical bus=7
found->	vendor=0x8086, dev=0x0329, revid=0x09
	domain=0, bus=7, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
found->	vendor=0x8086, dev=0x0326, revid=0x09
	domain=0, bus=7, slot=0, func=1
	class=08-00-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfe8fe000, size 12, enabled
pcib1: requested memory range 0xfe8fe000-0xfe8fefff: good
found->	vendor=0x8086, dev=0x032a, revid=0x09
	domain=0, bus=7, slot=0, func=2
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
found->	vendor=0x8086, dev=0x0327, revid=0x09
	domain=0, bus=7, slot=0, func=3
	class=08-00-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfe8ff000, size 12, enabled
pcib1: requested memory range 0xfe8ff000-0xfe8fffff: good
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pcib2:   domain            0
pcib2:   secondary bus     10
pcib2:   subordinate bus   10
pcib2:   I/O decode        0x0-0x0
pcib2:   no prefetched decode
pci10: <ACPI PCI bus> on pcib2
pci10: domain=0, physical bus=10
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci7
pcib3:   domain            0
pcib3:   secondary bus     8
pcib3:   subordinate bus   9
pcib3:   I/O decode        0xe000-0xefff
pcib3:   memory decode     0xfe900000-0xfebfffff
pcib3:   prefetched decode 0xfbf00000-0xfbffffff
pci8: <ACPI PCI bus> on pcib3
pci8: domain=0, physical bus=8
found->	vendor=0x8086, dev=0x0335, revid=0x07
	domain=0, bus=8, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0006, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D1 D3  current D0
found->	vendor=0x8086, dev=0x1079, revid=0x03
	domain=0, bus=8, slot=4, func=0
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0230, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfe9a0000, size 17, enabled
pcib3: requested memory range 0xfe9a0000-0xfe9bffff: good
pcib1: requested memory range 0xfe9a0000-0xfe9bffff: good
	map[20]: type I/O Port, range 32, base 0xe880, size  6, enabled
pcib3: requested I/O range 0xe880-0xe8bf: in range
pcib1: requested I/O range 0xe880-0xe8bf: in range
pcib3: matched entry for 8.4.INTA
pcib3: slot 4 INTA hardwired to IRQ 52
found->	vendor=0x8086, dev=0x1079, revid=0x03
	domain=0, bus=8, slot=4, func=1
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0230, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfe9e0000, size 17, enabled
pcib3: requested memory range 0xfe9e0000-0xfe9fffff: good
pcib1: requested memory range 0xfe9e0000-0xfe9fffff: good
	map[20]: type I/O Port, range 32, base 0xec00, size  6, enabled
pcib3: requested I/O range 0xec00-0xec3f: in range
pcib1: requested I/O range 0xec00-0xec3f: in range
pcib3: matched entry for 8.4.INTB
pcib3: slot 4 INTB hardwired to IRQ 53
pcib4: <PCI-PCI bridge> at device 1.0 on pci8
pcib4:   domain            0
pcib4:   secondary bus     9
pcib4:   subordinate bus   9
pcib4:   I/O decode        0x0-0x0
pcib4:   memory decode     0xfea00000-0xfebfffff
pcib4:   prefetched decode 0xfbf00000-0xfbffffff
pci9: <PCI bus> on pcib4
pci9: domain=0, physical bus=9
found->	vendor=0x1000, dev=0x0409, revid=0x07
	domain=0, bus=9, slot=14, func=0
	class=01-04-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0096, statreg=0x0230, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D1 D3  current D0
	MSI supports 2 messages, 64 bit
	map[10]: type Prefetchable Memory, range 32, base 0xfbff0000, size 16, enabled
pcib4: requested memory range 0xfbff0000-0xfbffffff: good
pcib3: requested memory range 0xfbff0000-0xfbffffff: good
pcib1: requested memory range 0xfbff0000-0xfbffffff: good
	map[18]: type Memory, range 32, base 0xfeb00000, size 20, enabled
pcib4: requested memory range 0xfeb00000-0xfebfffff: good
pcib3: requested memory range 0xfeb00000-0xfebfffff: good
pcib1: requested memory range 0xfeb00000-0xfebfffff: good
pcib3: matched entry for 8.1.INTA
pcib3: slot 1 INTA hardwired to IRQ 48
pcib4: slot 14 INTC is routed to irq 48
amr0: <LSILogic MegaRAID 1.53> mem 0xfbff0000-0xfbffffff,0xfeb00000-0xfebfffff irq 48 at device 14.0 on pci9
amr0: Using 64-bit DMA
amr0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfbff0000
ioapic2: routing intpin 0 (PCI IRQ 48) to vector 49
amr0: [MPSAFE]
amr0: [ITHREAD]
amr0: <LSILogic Intel(R) RAID Controller SRCS28X> Firmware 815C, BIOS H432, 128MB RAM
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xe880-0xe8bf mem 0xfe9a0000-0xfe9bffff irq 52 at device 4.0 on pci8
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfe9a0000
em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0xe880
em0: bpf attached
em0: Ethernet address: 00:07:e9:32:98:d4
ioapic2: routing intpin 4 (PCI IRQ 52) to vector 50
em0: [FILTER]
em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xec00-0xec3f mem 0xfe9e0000-0xfe9fffff irq 53 at device 4.1 on pci8
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfe9e0000
em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0xec00
em1: bpf attached
em1: Ethernet address: 00:07:e9:32:98:d5
ioapic2: routing intpin 5 (PCI IRQ 53) to vector 51
em1: [FILTER]
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pcib5:   domain            0
pcib5:   secondary bus     6
pcib5:   subordinate bus   6
pcib5:   I/O decode        0x0-0x0
pcib5:   no prefetched decode
pci6: <ACPI PCI bus> on pcib5
pci6: domain=0, physical bus=6
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pcib6:   domain            0
pcib6:   secondary bus     5
pcib6:   subordinate bus   5
pcib6:   I/O decode        0x0-0x0
pcib6:   no prefetched decode
pci5: <ACPI PCI bus> on pcib6
pci5: domain=0, physical bus=5
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 7.0 on pci0
pcib7:   domain            0
pcib7:   secondary bus     2
pcib7:   subordinate bus   4
pcib7:   I/O decode        0x0-0x0
pcib7:   memory decode     0xfe700000-0xfe7fffff
pcib7:   no prefetched decode
pcib7: could not get PCI interrupt routing table for \\_SB_.PCI0.EPC1 - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib7
pci2: domain=0, physical bus=2
found->	vendor=0x8086, dev=0x0330, revid=0x07
	domain=0, bus=2, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
found->	vendor=0x8086, dev=0x0331, revid=0x07
	domain=0, bus=2, slot=0, func=1
	class=08-00-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfe7fe000, size 12, enabled
pcib7: requested memory range 0xfe7fe000-0xfe7fefff: good
found->	vendor=0x8086, dev=0x0332, revid=0x07
	domain=0, bus=2, slot=0, func=2
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
found->	vendor=0x8086, dev=0x0333, revid=0x07
	domain=0, bus=2, slot=0, func=3
	class=08-00-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfe7ff000, size 12, enabled
pcib7: requested memory range 0xfe7ff000-0xfe7fffff: good
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pcib8:   domain            0
pcib8:   secondary bus     4
pcib8:   subordinate bus   4
pcib8:   I/O decode        0x0-0x0
pcib8:   no prefetched decode
pci4: <ACPI PCI bus> on pcib8
pci4: domain=0, physical bus=4
pcib9: <ACPI PCI-PCI bridge> at device 0.2 on pci2
pcib9:   domain            0
pcib9:   secondary bus     3
pcib9:   subordinate bus   3
pcib9:   I/O decode        0x0-0x0
pcib9:   no prefetched decode
pci3: <ACPI PCI bus> on pcib9
pci3: domain=0, physical bus=3
pcib10: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib10:   domain            0
pcib10:   secondary bus     1
pcib10:   subordinate bus   1
pcib10:   I/O decode        0xd000-0xdfff
pcib10:   memory decode     0xfd000000-0xfe6fffff
pcib10:   no prefetched decode
pcib10:   Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib10
pci1: domain=0, physical bus=1
found->	vendor=0x1002, dev=0x4752, revid=0x27
	domain=0, bus=1, slot=12, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfd000000, size 24, enabled
pcib10: requested memory range 0xfd000000-0xfdffffff: good
	map[14]: type I/O Port, range 32, base 0xd800, size  8, enabled
pcib10: requested I/O range 0xd800-0xd8ff: in range
	map[18]: type Memory, range 32, base 0xfe6ff000, size 12, enabled
pcib10: requested memory range 0xfe6ff000-0xfe6fffff: good
pcib10: matched entry for 1.12.INTA
pcib10: slot 12 INTA hardwired to IRQ 17
vgapci0: <VGA-compatible display> port 0xd800-0xd8ff mem 0xfd000000-0xfdffffff,0xfe6ff000-0xfe6fffff irq 17 at device 12.0 on pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=01
ata0: stat0=0x50 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=01 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 52
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 53
ata1: [MPSAFE]
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 54
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 55
sio1: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model 4D+ Mouse, device ID 8-00, 4 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c8, syncbits:00
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xcb7ff,0xcb800-0xcc7ff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 238312 -> 100000
procfs registered
lapic: Divisor 2, Frequency 99750560 hz
Timecounter "TSC" frequency 2793015582 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80bc6c08
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on ICH5 chip
acd0: setting UDMA33 on ICH5 chip
acd0: <QSI CD-RW/DVD-ROM SBW-243/TX09> CDRW drive at ata0 as master
acd0: read 4126KB/s (4126KB/s) write 1720KB/s (1720KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-RW 120mm data disc
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 60000MB (122880000 sectors) RAID 1 (optimal)
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x06000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x07000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioaGpEiOcM0::  nAesws idginsikn ga mrIdS0A 
IRQ 3 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 0
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 12 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 0
ioapic2: Assigning PCI IRQ 48 to local APIC 0
ioapic2: Assigning PCI IRQ 52 to local APIC 0
ioapic2: Assigning PCI IRQ 53 to local APIC 0
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_LiveFS.
acd0: FAILURE - READ_BIG HARDWARE ERROR asc=0x3e ascq=0x02 
Trying to mount root from ufs:/dev/md0
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /rescue/init
start_init: trying /stand/sysinstall

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 17:57:31
bu7cher
8.0-CURRENT не пробовали загрузить? То что контроллеры не видятся - это ненормально, нужно пожаловаться разработчикам.

Re: FreeBSD и 2 SRCS28X

Добавлено: 2008-03-20 20:00:57
hizel
ндя, на боевом серваке каррент юзать , не комильфо
только линукс товарищь :(
Часовой пояс: UTC+03:00
Страница 1 из 2
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/