Страница 1 из 1

обнавление мира и системы

Добавлено: 2010-06-23 23:41:45
krokozjabr
дела ыло вечерам дел было дофига...
некоторые помнят мою историю с домашнем гейтвем
я его настроил всё было офигенно . пока мой брат не приехал он неудачно поставил винду н а серв для того чтобы поиграть в гта
ну поставил я фрю релиз решил ещё и ipnat попробовать и виртуал бокс начал собирать ядро и тут опа
ошибки при сборки

Код: Выделить всё

isp_pci.o(.text+0x317d): In function `isp_pci_attach':
/usr/src/sys/dev/isp/isp_pci.c:850: undefined reference to `firmware_get'
isp_pci.o(.text+0x3c40):/usr/src/sys/dev/isp/isp_pci.c:854: undefined reference to `firmware_get'
rt2661.o(.text+0x22e6): In function `rt2661_init_locked':
/usr/src/sys/dev/ral/rt2661.c:2579: undefined reference to `firmware_put'
rt2661.o(.text+0x283b):/usr/src/sys/dev/ral/rt2661.c:2539: undefined reference to `firmware_get'
rt2661.o(.text+0x2bca):/usr/src/sys/dev/ral/rt2661.c:2579: undefined reference to `firmware_put'
*** Error code 1

Stop in /usr/obj/usr/src/sys/mkir.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.


катт ядра

Код: Выделить всё

#
# GENERIC -- Generic kernel configuration file for FreeBSD/amd64
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.531.2.4.2.2 2009/11/09 23:48:01 kensmith Exp $

cpu		HAMMER
ident		mkir

# To statically compile in device wiring instead of /boot/device.hints
#hints		"GENERIC.hints"		# Default places to look for devices.

# Use the following to compile in values accessible to the kernel
# through getenv() (or kenv(1) in userland). The format of the file
# is 'variable=value', see kenv(1)
#
# env		"GENERIC.env"

makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols

options 	SCHED_ULE		# ULE scheduler
options 	PREEMPTION		# Enable kernel thread preemption
options 	INET			# InterNETworking
#options 	INET6			# IPv6 communications protocols
options 	SCTP			# Stream Control Transmission Protocol
options 	FFS			# Berkeley Fast Filesystem
options 	SOFTUPDATES		# Enable FFS soft updates support
options 	UFS_ACL			# Support for access control lists
options 	UFS_DIRHASH		# Improve performance on big directories
options 	UFS_GJOURNAL		# Enable gjournal-based UFS journaling
options 	MD_ROOT			# MD is a potential root device
options 	NFSCLIENT		# Network Filesystem Client
#options 	NFSSERVER		# Network Filesystem Server
options 	NFSLOCKD		# Network Lock Manager
options 	NFS_ROOT		# NFS usable as /, requires NFSCLIENT
options 	MSDOSFS			# MSDOS Filesystem
options 	CD9660			# ISO 9660 Filesystem
options 	PROCFS			# Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		# Pseudo-filesystem framework
options 	GEOM_PART_GPT		# GUID Partition Tables.
options 	GEOM_LABEL		# Provides labelization
options 	COMPAT_43TTY		# BSD 4.3 TTY compat (sgtty)
options 	COMPAT_IA32		# Compatible with i386 binaries
options 	COMPAT_FREEBSD4		# Compatible with FreeBSD4
options 	COMPAT_FREEBSD5		# Compatible with FreeBSD5
options 	COMPAT_FREEBSD6		# Compatible with FreeBSD6
options 	COMPAT_FREEBSD7		# Compatible with FreeBSD7
options 	SCSI_DELAY=5000		# Delay (in ms) before probing SCSI
options 	KTRACE			# ktrace(1) support
options 	STACK			# stack(9) support
options 	SYSVSHM			# SYSV-style shared memory
options 	SYSVMSG			# SYSV-style message queues
options 	SYSVSEM			# SYSV-style semaphores
options 	P1003_1B_SEMAPHORES	# POSIX-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options 	PRINTF_BUFR_SIZE=128	# Prevent printf output being interspersed.
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	HWPMC_HOOKS		# Necessary kernel hooks for hwpmc(4)
options 	AUDIT			# Security event auditing
options 	MAC			# TrustedBSD MAC Framework
options		FLOWTABLE		# per-cpu routing cache
#options 	KDTRACE_FRAME		# Ensure frames are compiled in
#options 	KDTRACE_HOOKS		# Kernel DTrace hooks

# Make an SMP-capable kernel by default
options 	SMP			# Symmetric MultiProcessor Kernel

# CPU frequency control
device		cpufreq

# Bus support.
device		acpi
device		pci

# Floppy drives
#device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk		# ATA disk drives
device		ataraid		# ATA RAID drives
device		atapicd		# ATAPI CDROM drives
device		atapifd		# ATAPI floppy drives
device		atapist		# ATAPI tape drives
options 	ATA_STATIC_ID	# Static device numbering

# SCSI Controllers
device		ahc		# AHA2940 and onboard AIC7xxx devices
options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
device		ahd		# AHA39320/29320 and onboard AIC79xx devices
options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~215k to driver.
device		amd		# AMD 53C974 (Tekram DC-390(T))
device		hptiop		# Highpoint RocketRaid 3xxx series
device		isp		# Qlogic family
#device		ispfw		# Firmware for QLogic HBAs- normally a module
device		mpt		# LSI-Logic MPT-Fusion
#device		ncr		# NCR/Symbios Logic
device		sym		# NCR/Symbios Logic (newer chipsets + those of `ncr')
device		trm		# Tekram DC395U/UW/F DC315U adapters

device		adv		# Advansys SCSI adapters
device		adw		# Advansys wide SCSI adapters
device		aic		# Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device		bt		# Buslogic/Mylex MultiMaster SCSI adapters

# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
device		ch		# SCSI media changers
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)
device		ses		# SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
device		amr		# AMI MegaRAID
device		arcmsr		# Areca SATA II RAID
#XXX it is not 64-bit clean, -scottl
#device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
device		ciss		# Compaq Smart RAID 5*
device		dpt		# DPT Smartcache III, IV - See NOTES for options
device		hptmv		# Highpoint RocketRAID 182x
device		hptrr		# Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
device		iir		# Intel Integrated RAID
device		ips		# IBM (Adaptec) ServeRAID
device		mly		# Mylex AcceleRAID/eXtremeRAID
device		twa		# 3ware 9000 series PATA/SATA RAID

# RAID controllers
#device		aac		# Adaptec FSA RAID
#device		aacp		# SCSI passthrough for aac (requires CAM)
#device		ida		# Compaq Smart RAID
#device		mfi		# LSI MegaRAID SAS
#device		mlx		# Mylex DAC960 family
#XXX pointer/int warnings
#device		pst		# Promise Supertrak SX6000
device		twe		# 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		kbdmux		# keyboard multiplexer

device		vga		# VGA video card driver

device		splash		# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device		sc

device		agp		# support several AGP chipsets
  
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device		cbb		# cardbus (yenta) bridge
device		pccard		# PC Card (16-bit) bus
device		cardbus		# CardBus (32-bit) bus

# Serial (COM) ports
device		uart		# Generic UART driver

# Parallel port
device		ppc
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
#device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device		puc

# PCI Ethernet NICs.
device		de		# DEC/Intel DC21x4x (``Tulip'')
device		em		# Intel PRO/1000 Gigabit Ethernet Family
device		igb		# Intel PRO/1000 PCIE Server Gigabit Family
device		ixgbe		# Intel PRO/10GbE PCIE Ethernet Family
device		le		# AMD Am7900 LANCE and Am79C9xx PCnet
device		ti		# Alteon Networks Tigon I/II gigabit Ethernet
device		txp		# 3Com 3cR990 (``Typhoon'')
device		vx		# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
#device		ae		# Attansic/Atheros L2 FastEthernet
#device		age		# Attansic/Atheros L1 Gigabit Ethernet
#device		alc		# Atheros AR8131/AR8132 Ethernet
#device		ale		# Atheros AR8121/AR8113/AR8114 Ethernet
#device		bce		# Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device		bfe		# Broadcom BCM440x 10/100 Ethernet
#device		bge		# Broadcom BCM570xx Gigabit Ethernet
#device		dc		# DEC/Intel 21143 and various workalikes
#device		et		# Agere ET1310 10/100/Gigabit Ethernet
device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
device		jme		# JMicron JMC250 Gigabit/JMC260 Fast Ethernet
device		lge		# Level 1 LXT1001 gigabit Ethernet
device		msk		# Marvell/SysKonnect Yukon II Gigabit Ethernet
device		nfe		# nVidia nForce MCP on-board Ethernet
device		nge		# NatSemi DP83820 gigabit Ethernet
#device		nve		# nVidia nForce MCP on-board Ethernet Networking
device		pcn		# AMD Am79C97x PCI 10/100 (precedence over 'le')
device		re		# RealTek 8139C+/8169/8169S/8110S
device		rl		# RealTek 8129/8139
device		sf		# Adaptec AIC-6915 (``Starfire'')
device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
device		sk		# SysKonnect SK-984x & SK-982x gigabit Ethernet
device		ste		# Sundance ST201 (D-Link DFE-550TX)
device		stge		# Sundance/Tamarack TC9021 gigabit Ethernet
device		tl		# Texas Instruments ThunderLAN
device		tx		# SMC EtherPower II (83c170 ``EPIC'')
device		vge		# VIA VT612x gigabit Ethernet
device		vr		# VIA Rhine, Rhine II
device		wb		# Winbond W89C840F
device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

#
# Wireless NIC cards
device		wlan		# 802.11 support
options 	IEEE80211_DEBUG	# enable debug msgs
options 	IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
options 	IEEE80211_SUPPORT_MESH	# enable 802.11s draft support
device		wlan_wep	# 802.11 WEP support
device		wlan_ccmp	# 802.11 CCMP support
device		wlan_tkip	# 802.11 TKIP support
device		wlan_amrr	# AMRR transmit rate control algorithm
device		an		# Aironet 4500/4800 802.11 wireless NICs.
device		ath		# Atheros pci/cardbus NIC's
device		ath_hal		# pci/cardbus chip support
options 	AH_SUPPORT_AR5416	# enable AR5416 tx/rx descriptors
device		ath_rate_sample	# SampleRate tx rate control for ath
device		ral		# Ralink Technology RT2500 wireless NICs.
device		wi		# WaveLAN/Intersil/Symbol 802.11 wireless NICs.

# Pseudo devices.
device		loop		# Network loopback
device		random		# Entropy device
device		ether		# Ethernet support
device		tun		# Packet tunnel.
device		pty		# BSD-style compatibility pseudo ttys
device		md		# Memory "disks"
device		gif		# IPv6 and IPv4 tunneling
#device		faith		# IPv6-to-IPv4 relaying (translation)
#device		firmware	# firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device		bpf		# Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		ehci		# EHCI PCI->USB interface (USB 2.0)
device		usb		# USB Bus (required)
#device		udbp		# USB Double Bulk Pipe devices
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
device		rum		# Ralink Technology RT2501USB wireless NICs
device		uath		# Atheros AR5523 wireless NICs
device		ural		# Ralink Technology RT2500USB wireless NICs
device		zyd		# ZyDAS zb1211/zb1211b wireless NICs
device		urio		# Diamond Rio 500 MP3 player
# USB Serial devices
device		uark		# Technologies ARK3116 based serial adapters
device		ubsa		# Belkin F5U103 and compatible serial adapters
device		uftdi		# For FTDI usb serial adapters
device		uipaq		# Some WinCE based devices
device		uplcom		# Prolific PL-2303 serial adapters
device		uslcom		# SI Labs CP2101/CP2102 serial adapters
device		uvisor		# Visor and Palm devices
device		uvscom		# USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
device		aue		# ADMtek USB Ethernet
device		axe		# ASIX Electronics USB Ethernet
device		cdce		# Generic USB over Ethernet
device		cue		# CATC USB Ethernet
device		kue		# Kawasaki LSI USB Ethernet
device		rue		# RealTek RTL8150 USB Ethernet
device		udav		# Davicom DM9601E USB

# ##########andre ########################

options         IPFIREWALL		# встраиваем поддержку файрволла в ядро
options         IPFIREWALL_VERBOSE	# вывод информации об отброшенных пакетах
options         IPFIREWALL_VERBOSE_LIMIT=100	# ограничение, чтоб весь /var
						# логами не засрали
options         IPFIREWALL_FORWARD	# включаем поддержку перенаправления
					# чтобы можно было сделать
					# позрачный прокси-сервер
					# TCP пакетов ядром
options         IPDIVERT		# поддержка IP-маскарадинга
options         DUMMYNET		# поддержка DUMMYNET (искуственное 
					# ограничение пропускной способности 
					# сети, может быть нужно если есть 
					# необходимость урезать канал одним					# и разжать другим компьютерам)
#options		TCP_DROP_SYNFIN		# Это нужно, чтобы сетевые сканеры 
					# не могли определять версию OS на
					# сервере. Также нужно добавить в 
					# /etc/rc.conf строчку
					# tcp_drop_synfin="YES"

options 	IPFIREWALL_NAT		#ipfw kernel nat support

device		tap
#options         SC_PIXEL_MODE
options 	LIBALIAS
ХОТЕЛ дj stable ОБНАВИТЬ СНАЧАЛА cvs

Код: Выделить всё

# $FreeBSD: src/share/examples/cvsup/stable-supfile,v 1.33.2.3.2.1 2009/10/25 01:10:29 kensmith Exp $
#
# This file contains all of the "CVSup collections" that make up the
# FreeBSD-stable source tree.
#
# CVSup (CVS Update Protocol) allows you to download the latest CVS
# tree (or any branch of development therefrom) to your system easily
# and efficiently (far more so than with sup, which CVSup is aimed
# at replacing).  If you're running CVSup interactively, and are
# currently using an X display server, you should run CVSup as follows
# to keep your CVS tree up-to-date:
#
#	cvsup stable-supfile
#
# If not running X, or invoking cvsup from a non-interactive script, then
# run it as follows:
#
#	cvsup -g -L 2 stable-supfile
#
# You may wish to change some of the settings in this file to better
# suit your system:
#
# host=Cvsup.FreeBSD.org
#		This specifies the server host which will supply the
#		file updates.  You must change it to one of the CVSup
#		mirror sites listed in the FreeBSD Handbook at
#		http://www.freebsd.org/doc/handbook/mirrors.html.
#		You can	override this setting on the command line
#		with cvsup's "-h host" option.
#
# base=/var/db
#		This specifies the root where CVSup will store information
#		about the collections you have transferred to your system.
#		A setting of "/var/db" will generate this information in
#		/var/db/sup.  You can override the "base" setting on the
#		command line with cvsup's "-b base" option.  This directory
#		must exist in order to run CVSup.
#
# prefix=/usr
#		This specifies where to place the requested files.  A
#		setting of "/usr" will place all of the files requested
#		in "/usr/src" (e.g., "/usr/src/bin", "/usr/src/lib").
#		The prefix directory must exist in order to run CVSup.
#
###############################################################################
#
# DANGER!  WARNING!  LOOK OUT!  VORSICHT!
#
# If you add any of the ports or doc collections to this file, be sure to
# specify them with a "tag" value set to ".", like this:
#
#   ports-all tag=.
#   doc-all tag=.
#
# If you leave out the "tag=." portion, CVSup will delete all of
# the files in your ports or doc tree.  That is because the ports and doc
# collections do not use the same tags as the main part of the FreeBSD 
# source tree.
#
###############################################################################

# Defaults that apply to all the collections
#
# IMPORTANT: Change the next line to use one of the CVSup mirror sites
# listed at http://www.freebsd.org/doc/handbook/mirrors.html.
*default host=cvsup.FreeBSD.org
*default base=/var/db
*default prefix=/usr
# The following line is for 8-stable.  If you want 7-stable, 6-stable,
# 5-stable, 4-stable, 3-stable, or 2.2-stable, change to "RELENG_7",
# "RELENG_6", "RELENG_5", "RELENG_4", "RELENG_3", or "RELENG_2_2"
# respectively.
*default release=cvs tag=RELENG_8
*default delete use-rel-suffix

# If you seem to be limited by CPU rather than network or disk bandwidth, try
# commenting out the following line.  (Normally, today's CPUs are fast enough
# that you want to run compression.)
*default compress

## Main Source Tree.
#
# The easiest way to get the main source tree is to use the "src-all"
# mega-collection.  It includes all of the individual "src-*" collections.
# Please note:  If you want to track -STABLE, leave this uncommented.
src-all

# These are the individual collections that make up "src-all".  If you
# use these, be sure to comment out "src-all" above.
#src-base
#src-bin
#src-cddl
#src-contrib
#src-etc
#src-games
#src-gnu
#src-include
#src-kerberos5
#src-kerberosIV
#src-lib
#src-libexec
#src-release
#src-rescue
#src-sbin
#src-share
#src-sys
#src-tools
#src-usrbin
#src-usrsbin
# These are the individual collections that make up FreeBSD's crypto
# collection. They are no longer export-restricted and are a part of
# src-all
#src-crypto
#src-eBones
#src-secure
#src-sys-crypto
СКАЧАЛ выполнил

Код: Выделить всё

make ckean %% shutdown now
mount / 
cd /usr/src
mergemaster -p
make buildworkd
часов пять-деся собирался
сбрался уведомил и...

Код: Выделить всё

 make installworld
он выдал пару строк о lib и повис я час жду два жду нечего не миняеться я жму enter и я вшелле я такой радосный
пишу

Код: Выделить всё

mergemaster -FU
зоминил файлы но .. после рестарта нечего не изменилась
а нород хочет серв
сорри за ошибки писал поздно
и что я сделал не так?

Re: обнавление мира и системы

Добавлено: 2010-06-24 0:05:47
MASiK
не хера не понял....
Какой виртуал бокс? какой брат, какое ГТА...

Что ты делал то? make kernel или make world ? Где ошибка то была, и что ты там потом сделал, нафига мергмастер если ты не чего не пересобрал ёмаё... а сорсы обновил, или не обновил?

Не фига не понял чёт :cz2:

Re: обнавление мира и системы

Добавлено: 2010-06-24 0:21:18
krokozjabr
MASiK писал(а):не хера не понял....
Какой виртуал бокс? какой брат, какое ГТА...

Что ты делал то? make kernel или make world ? Где ошибка то была, и что ты там потом сделал, нафига мергмастер если ты не чего не пересобрал ёмаё... а сорсы обновил, или не обновил?

Не фига не понял чёт :cz2:
virtualbox это виртеалка решил внутри раненый vds хостинг сделать
брат обычный форматнул диск полностью под винду
делал я сначала make buildworld и потом make installworld
src обнавил первым делом
и я мир пересобирал 18 часов блин

Re: обнавление мира и системы

Добавлено: 2010-06-24 5:00:07
manefesto
читай хэндбук

Код: Выделить всё

rm -rf /usr/obj/*
cd /usr/src
make buildworld
make buildkernel
make installkernel
mergmemaster -p
make installworld
mergemaster

Re: обнавление мира и системы

Добавлено: 2010-06-24 12:31:11
krokozjabr
я делал всё по хендбуку
это тупик

Re: обнавление мира и системы

Добавлено: 2010-06-24 16:58:56
_vadim64
1. Делай всё по хендбуку
2. Если ты уверен что всё правильно делал по хендбуку и не получил обещанного в хендбуке результата, значит тебе нада писать баг репорт и засылать его в Беркли, так когда выполнение действий, описаных в оффициальном руководстве, не приводит к результатам, это называется баг.

З.Ы.: Я надеюсь ты всё таки попробуешь сделать всё по хендбуку.

Re: обнавление мира и системы

Добавлено: 2010-06-24 17:53:12
Dog
Не углубляясь в детальные разбирательства: SCTP без INET6 не работает, сборка такого ядра вылетит с ошибкой.
Советую сначала детально изучить /usr/src/sys/conf/NOTES и /usr/src/sys/amd64/conf/NOTES , а затем почитать маны по всем устройствам и опциям, которые добавляются/убираются из ядра. Времени конечно займет прорву, но даст много понимания по теме и избавит от кучи ошибок в дальнейшем.

Re: обнавление мира и системы

Добавлено: 2010-06-25 23:07:13
krokozjabr
не много почисав голову
стал думать
и понял что ошибки из-за устройсв
я убраз

Код: Выделить всё

device isp 
device ral
все собралось слёту
тока что это device isp
не одном notes ни слова

Re: обнавление мира и системы

Добавлено: 2010-06-26 11:05:07
MASiK
krokozjabr писал(а):не много почисав голову
стал думать
и понял что ошибки из-за устройсв
я убраз

Код: Выделить всё

device isp 
device ral
все собралось слёту
тока что это device isp
не одном notes ни слова
# SCSI Controllers
device ahb # EISA AHA1742 family
device ahc # AHA2940 and onboard AIC7xxx devices
device ahd # AHA39320/29320 and onboard AIC79xx devices
device amd # AMD 53C974 (Teckram DC-390(T))
device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a module
# Wireless NIC cards
device wlan # 802.11 support
options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
options IEEE80211_SUPPORT_MESH # enable 802.11s draft support
device wlan_wep # 802.11 WEP support
device wlan_ccmp # 802.11 CCMP support
device wlan_tkip # 802.11 TKIP support
device wlan_amrr # AMRR transmit rate control algorithm
device ral # Ralink Technology RT2500 wireless NICs.
device ralfw

Re: обнавление мира и системы

Добавлено: 2010-06-26 13:10:04
krokozjabr
ядро не боотиться генерик тоже пишет вот что
Изображение

Re: обнавление мира и системы

Добавлено: 2010-06-26 19:54:43
Gendos
-->

Код: Выделить всё

device        firmware    # firmware assist module
Траву и пиво в унитаз..............

Re: обнавление мира и системы

Добавлено: 2010-06-27 17:21:38
krokozjabr
ковырял ковырял решил с лейвсд загрузиться
вообщим всё зароботало теперь мучую ipfw да и системв обновлена 8-1 - PRELESE